MAX7219 followup (#7564)
* Add MAX7219_DEBUG to Travis CI testing * Tweak config and use standard pin naming for MAX7219_DEBUG * MAX7219: Apply coding standards, use macros, etc. * Make code work...
This commit is contained in:
Scott Lahteine
Roxy-3D
parent
52073f21c5
commit
5851c2d36f
@ -90,7 +90,7 @@ script:
|
||||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS
|
||||
- opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_RGBW_LED
|
||||
- opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE
|
||||
- opt_enable_adv FWRETRACT
|
||||
- opt_enable_adv FWRETRACT MAX7219_DEBUG
|
||||
- opt_set ABL_GRID_POINTS_X 16
|
||||
- opt_set ABL_GRID_POINTS_Y 16
|
||||
- opt_set_adv FANMUX0_PIN 53
|
||||
|
||||
@ -1382,4 +1382,32 @@
|
||||
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -21,37 +21,39 @@
|
||||
*/
|
||||
|
||||
/**
|
||||
* This module is normally not enabled. It can be enabled to facilitate
|
||||
* the display of extra debug information during code development.
|
||||
* It assumes the existance of a Max7219 LED Matrix. A suitable
|
||||
* device can be obtained on eBay similar to this: http://www.ebay.com/itm/191781645249
|
||||
* for under $2.00 including shipping.
|
||||
* This module is off by default, but can be enabled to facilitate the display of
|
||||
* extra debug information during code development. It assumes the existence of a
|
||||
* Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this:
|
||||
* http://www.ebay.com/itm/191781645249 for under $2.00 including shipping.
|
||||
*
|
||||
* Just connect up +5v and Gnd to give it power. And then 3 wires declared in the
|
||||
* #define's below. Actual pin assignments can be changed in MAX7219_DEBUG section
|
||||
* of configuration_adv.h
|
||||
* Just connect up +5v and GND to give it power, then connect up the pins assigned
|
||||
* in Configuration_adv.h. For example, on the Re-ARM you could use:
|
||||
*
|
||||
* #define Max7219_clock 77
|
||||
* #define Max7219_data_in 78
|
||||
* #define Max7219_load 79
|
||||
* #define MAX7219_CLK_PIN 77
|
||||
* #define MAX7219_DIN_PIN 78
|
||||
* #define MAX7219_LOAD_PIN 79
|
||||
*
|
||||
* First call Max7219_init() and then there are a number of support functions available
|
||||
* to control the LED's in the 8x8 grid.
|
||||
* Max7219_init() is called automatically at startup, and then there are a number of
|
||||
* support functions available to control the LEDs in the 8x8 grid.
|
||||
*
|
||||
* void Max7219_init();
|
||||
* void Max7219_PutByte(uint8_t data);
|
||||
* void Max7219(uint8_t reg, uint8_t data);
|
||||
* void Max7219_LED_On( int8_t row, int8_t col);
|
||||
* void Max7219_LED_Off( int8_t row, int8_t col);
|
||||
* void Max7219_LED_Toggle( int8_t row, int8_t col);
|
||||
* void Max7219_Clear_Row( int8_t row);
|
||||
* void Max7219_Clear_Column( int8_t col);
|
||||
* void Max7219_LED_On(uint8_t row, uint8_t col);
|
||||
* void Max7219_LED_Off(uint8_t row, uint8_t col);
|
||||
* void Max7219_LED_Toggle(uint8_t row, uint8_t col);
|
||||
* void Max7219_Clear_Row(uint8_t row);
|
||||
* void Max7219_Clear_Column(uint8_t col);
|
||||
* void Max7219_Set_Row(uint8_t row, uint8_t val);
|
||||
* void Max7219_Set_Column(uint8_t col, uint8_t val);
|
||||
* void Max7219_idle_tasks();
|
||||
*/
|
||||
|
||||
|
||||
#include "Marlin.h"
|
||||
#include "MarlinConfig.h"
|
||||
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
|
||||
#include "Marlin.h"
|
||||
#include "planner.h"
|
||||
#include "stepper.h"
|
||||
#include "Max7219_Debug_LEDs.h"
|
||||
@ -59,161 +61,120 @@
|
||||
static uint8_t LEDs[8] = { 0 };
|
||||
|
||||
void Max7219_PutByte(uint8_t data) {
|
||||
uint8_t i = 8;
|
||||
while(i > 0) {
|
||||
digitalWrite( Max7219_clock, LOW); // tick
|
||||
if (data & 0x80) // check bit
|
||||
digitalWrite(Max7219_data_in,HIGH); // send 1
|
||||
else
|
||||
digitalWrite(Max7219_data_in,LOW); // send 0
|
||||
digitalWrite(Max7219_clock, HIGH); // tock
|
||||
data = data << 0x01;
|
||||
--i; // move to lesser bit
|
||||
for (uint8_t i = 8; i--;) {
|
||||
WRITE(MAX7219_CLK_PIN, LOW); // tick
|
||||
WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW); // send 1 or 0 based on data bit
|
||||
WRITE(MAX7219_CLK_PIN, HIGH); // tock
|
||||
data <<= 1;
|
||||
}
|
||||
}
|
||||
|
||||
void Max7219( uint8_t reg, uint8_t data) {
|
||||
digitalWrite(Max7219_load, LOW); // begin
|
||||
void Max7219(const uint8_t reg, const uint8_t data) {
|
||||
WRITE(MAX7219_LOAD_PIN, LOW); // begin
|
||||
Max7219_PutByte(reg); // specify register
|
||||
Max7219_PutByte(data); // put data
|
||||
digitalWrite(Max7219_load, LOW); // and tell the chip to load the data
|
||||
digitalWrite(Max7219_load,HIGH);
|
||||
WRITE(MAX7219_LOAD_PIN, LOW); // and tell the chip to load the data
|
||||
WRITE(MAX7219_LOAD_PIN, HIGH);
|
||||
}
|
||||
|
||||
void Max7219_LED_On( int8_t row, int8_t col) {
|
||||
int x_index;
|
||||
if ( row>=8 || row<0 || col>=8 || col<0)
|
||||
return;
|
||||
if ( LEDs[row] & (0x01<<col) ) // if LED is already on, just leave
|
||||
return;
|
||||
|
||||
LEDs[row] |= (0x01<<col);
|
||||
x_index = 7-row;
|
||||
Max7219( x_index+1, LEDs[row] );
|
||||
void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on) {
|
||||
if (row > 7 || col > 7) return;
|
||||
if (TEST(LEDs[row], col) == on) return; // if LED is already on/off, leave alone
|
||||
if (on) SBI(LEDs[row], col); else CBI(LEDs[row], col);
|
||||
Max7219(8 - row, LEDs[row]);
|
||||
}
|
||||
|
||||
void Max7219_LED_Off( int8_t row, int8_t col) {
|
||||
int x_index;
|
||||
if ( row>=8 || row<0 || col>=8 || col<0)
|
||||
return;
|
||||
if ( !(LEDs[row] & (0x01<<col)) ) // if LED is already off, just leave
|
||||
return;
|
||||
|
||||
LEDs[row] ^= (0x01<<col);
|
||||
x_index = 7-row;
|
||||
Max7219( x_index+1, LEDs[row] );
|
||||
void Max7219_LED_On(const uint8_t row, const uint8_t col) {
|
||||
Max7219_LED_Set(row, col, true);
|
||||
}
|
||||
|
||||
void Max7219_LED_Toggle( int8_t row, int8_t col) {
|
||||
if ( row>=8 || row<0 || col>=8 || col<0)
|
||||
return;
|
||||
if ( (LEDs[row] & (0x01<<col)) )
|
||||
void Max7219_LED_Off(const uint8_t row, const uint8_t col) {
|
||||
Max7219_LED_Set(row, col, false);
|
||||
}
|
||||
|
||||
void Max7219_LED_Toggle(const uint8_t row, const uint8_t col) {
|
||||
if (row > 7 || col > 7) return;
|
||||
if (TEST(LEDs[row], col))
|
||||
Max7219_LED_Off(row, col);
|
||||
else
|
||||
Max7219_LED_On(row, col);
|
||||
}
|
||||
|
||||
void Max7219_Clear_Column( int8_t col) {
|
||||
int x_index;
|
||||
if ( col>=8 || col<0 )
|
||||
return;
|
||||
void Max7219_Clear_Column(const uint8_t col) {
|
||||
if (col > 7) return;
|
||||
LEDs[col] = 0;
|
||||
x_index = 7-col;
|
||||
Max7219( x_index+1, LEDs[col] );
|
||||
Max7219(8 - col, LEDs[col]);
|
||||
}
|
||||
|
||||
void Max7219_Clear_Row( int8_t row) {
|
||||
int c;
|
||||
if ( row>=8 || row<0 )
|
||||
return;
|
||||
|
||||
for(c=0; c<8; c++)
|
||||
void Max7219_Clear_Row(const uint8_t row) {
|
||||
if (row > 7) return;
|
||||
for (uint8_t c = 0; c <= 7; c++)
|
||||
Max7219_LED_Off(c, row);
|
||||
}
|
||||
|
||||
void Max7219_Set_Row( int8_t row, uint8_t val) {
|
||||
int b;
|
||||
|
||||
if ( row<0 || row>7 )
|
||||
return;
|
||||
|
||||
if ( val<0 || val>255 )
|
||||
return;
|
||||
|
||||
for(b=0; b<8; b++)
|
||||
if ( val & (0x01 << b) )
|
||||
void Max7219_Set_Row(const uint8_t row, const uint8_t val) {
|
||||
if (row > 7) return;
|
||||
for (uint8_t b = 0; b <= 7; b++)
|
||||
if (TEST(val, b))
|
||||
Max7219_LED_On(7 - b, row);
|
||||
else
|
||||
Max7219_LED_Off(7 - b, row);
|
||||
}
|
||||
|
||||
void Max7219_Set_Column( int8_t col, uint8_t val) {
|
||||
int x_index;
|
||||
|
||||
if ( col>=8 || col<0 )
|
||||
return;
|
||||
|
||||
if ( val<0 || val>255 )
|
||||
return;
|
||||
|
||||
void Max7219_Set_Column(const uint8_t col, const uint8_t val) {
|
||||
if (col > 7) return;
|
||||
LEDs[col] = val;
|
||||
x_index = 7-col;
|
||||
Max7219( x_index+1, LEDs[col] );
|
||||
Max7219(8 - col, LEDs[col]);
|
||||
}
|
||||
|
||||
|
||||
void Max7219_init() {
|
||||
int i, x, y;
|
||||
uint8_t i, x, y;
|
||||
|
||||
pinMode(Max7219_data_in, OUTPUT);
|
||||
pinMode(Max7219_clock, OUTPUT);
|
||||
pinMode(Max7219_load, OUTPUT);
|
||||
SET_OUTPUT(MAX7219_DIN_PIN);
|
||||
SET_OUTPUT(MAX7219_CLK_PIN);
|
||||
|
||||
digitalWrite(Max7219_load, HIGH);
|
||||
OUT_WRITE(MAX7219_LOAD_PIN, HIGH);
|
||||
|
||||
//initiation of the max 7219
|
||||
Max7219(max7219_reg_scanLimit, 0x07);
|
||||
Max7219(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits)
|
||||
Max7219(max7219_reg_shutdown, 0x01); // not in shutdown mode
|
||||
Max7219(max7219_reg_displayTest, 0x00); // no display test
|
||||
Max7219(max7219_reg_intensity, 0x01 & 0x0f); // the first 0x0f is the value you can set
|
||||
// range: 0x00 to 0x0f
|
||||
for (i=0; i<8; i++) { // empty registers, turn all LEDs off
|
||||
Max7219(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set
|
||||
// range: 0x00 to 0x0F
|
||||
for (i = 0; i <= 7; i++) { // empty registers, turn all LEDs off
|
||||
LEDs[i] = 0x00;
|
||||
Max7219(i + 1, 0);
|
||||
}
|
||||
|
||||
for(x=0; x<8; x++) { // Do an austetically pleasing pattern to fully test
|
||||
for(y=0; y<8; y++) { // the Max7219 module and LED's. First, turn them
|
||||
for (x = 0; x <= 7; x++) // Do an aesthetically pleasing pattern to fully test
|
||||
for (y = 0; y <= 7; y++) { // the Max7219 module and LEDs. First, turn them
|
||||
Max7219_LED_On(x, y); // all on.
|
||||
delay(3);
|
||||
}
|
||||
}
|
||||
for(x=0; x<8; x++) { // Now, turn them all off.
|
||||
for(y=0; y<8; y++) {
|
||||
|
||||
for (x = 0; x <= 7; x++) // Now, turn them all off.
|
||||
for (y = 0; y <= 7; y++) {
|
||||
Max7219_LED_Off(x, y);
|
||||
delay(3); // delay() is OK here. Max7219_init() is only called from
|
||||
} // setup() and nothing is running yet.
|
||||
}
|
||||
|
||||
delay(150);
|
||||
|
||||
for(x=7; x>=0; x--) { // Now, do the same thing from the opposite direction
|
||||
for(y=0; y<8; y++) {
|
||||
for (x = 8; x--;) // Now, do the same thing from the opposite direction
|
||||
for (y = 0; y <= 7; y++) {
|
||||
Max7219_LED_On(x, y);
|
||||
delay(2);
|
||||
}
|
||||
}
|
||||
|
||||
for(x=7; x>=0; x--) {
|
||||
for(y=0; y<8; y++) {
|
||||
for (x = 8; x--;)
|
||||
for (y = 0; y <= 7; y++) {
|
||||
Max7219_LED_Off(x, y);
|
||||
delay(2);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
/**
|
||||
* These are sample debug features to demonstrate the usage of the 8x8 LED Matrix for debug purposes.
|
||||
* There is very little CPU burden added to the system by displaying information within the idle()
|
||||
* task.
|
||||
@ -223,7 +184,7 @@
|
||||
* or clear a row is not very significant.
|
||||
*/
|
||||
void Max7219_idle_tasks() {
|
||||
#ifdef MAX7219_DEBUG_PRINTER_ALIVE
|
||||
#if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
|
||||
static int debug_cnt = 0;
|
||||
if (debug_cnt++ > 100) {
|
||||
Max7219_LED_Toggle(7, 7);
|
||||
@ -250,37 +211,26 @@
|
||||
#endif
|
||||
|
||||
#ifdef MAX7219_DEBUG_STEPPER_QUEUE
|
||||
static int16_t last_depth=0, current_depth;
|
||||
uint8_t i;
|
||||
current_depth = planner.block_buffer_head - planner.block_buffer_tail;
|
||||
static int16_t last_depth = 0;
|
||||
int16_t current_depth = planner.block_buffer_head - planner.block_buffer_tail;
|
||||
if (current_depth != last_depth) { // usually, no update will be needed.
|
||||
if (current_depth < 0) current_depth += BLOCK_BUFFER_SIZE;
|
||||
NOMORE(current_depth, BLOCK_BUFFER_SIZE);
|
||||
NOMORE(current_depth, 16); // if the BLOCK_BUFFER_SIZE is greater than 16, two lines
|
||||
// of LEDs is enough to see if the buffer is draining
|
||||
|
||||
if ( current_depth < 0 )
|
||||
current_depth += BLOCK_BUFFER_SIZE;
|
||||
|
||||
if ( current_depth >= BLOCK_BUFFER_SIZE )
|
||||
current_depth = BLOCK_BUFFER_SIZE;
|
||||
|
||||
if ( current_depth > 16 ) // if the BLOCK_BUFFER_SIZE is greater than 16 two lines
|
||||
current_depth = 16; // of LED's is enough to see if the buffer is draining
|
||||
|
||||
const uint8_t st = min(current_depth, last_depth),
|
||||
en = max(current_depth, last_depth);
|
||||
if (current_depth < last_depth)
|
||||
for(i=current_depth; i<=last_depth; i++) { // clear the highest order LED's
|
||||
if ( i & 1)
|
||||
Max7219_LED_Off(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+1);
|
||||
for (uint8_t i = st; i <= en; i++) // clear the highest order LEDs
|
||||
Max7219_LED_Off(i >> 1, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
|
||||
else
|
||||
Max7219_LED_Off(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+0);
|
||||
}
|
||||
else
|
||||
for(i=last_depth; i<=current_depth; i++) { // light up the highest order LED's
|
||||
if ( i & 1)
|
||||
Max7219_LED_On(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+1);
|
||||
else
|
||||
Max7219_LED_On(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+0);
|
||||
}
|
||||
for (uint8_t i = st; i <= en; i++) // set the highest order LEDs
|
||||
Max7219_LED_On(i >> 1, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
|
||||
|
||||
last_depth = current_depth;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#endif //MAX7219_DEBUG
|
||||
|
||||
#endif // MAX7219_DEBUG
|
||||
|
||||
@ -21,34 +21,38 @@
|
||||
*/
|
||||
|
||||
/**
|
||||
* This module is normally not enabled and does not generate any code. But it
|
||||
* can be enabled to facilitate the display of extra debug information during
|
||||
* code development. It assumes the existance of a Max7219 LED Matrix. You
|
||||
* can get one on eBay similar to this: http://www.ebay.com/itm/191781645249
|
||||
* for under $2.00 including shipping.
|
||||
* This module is off by default, but can be enabled to facilitate the display of
|
||||
* extra debug information during code development. It assumes the existence of a
|
||||
* Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this:
|
||||
* http://www.ebay.com/itm/191781645249 for under $2.00 including shipping.
|
||||
*
|
||||
* Just connect up +5v and Gnd to give it power. And then 3 wires declared in the
|
||||
* #define's below. Actual pin assignments can be changed in MAX7219_DEBUG section
|
||||
* of configuration_adv.h
|
||||
* Just connect up +5v and GND to give it power, then connect up the pins assigned
|
||||
* in Configuration_adv.h. For example, on the Re-ARM you could use:
|
||||
*
|
||||
* You first call Max7219_init() and then you have 3 support functions available
|
||||
* to control the LED's in the 8x8 grid.
|
||||
* #define MAX7219_CLK_PIN 77
|
||||
* #define MAX7219_DIN_PIN 78
|
||||
* #define MAX7219_LOAD_PIN 79
|
||||
*
|
||||
* Max7219_init() is called automatically at startup, and then there are a number of
|
||||
* support functions available to control the LEDs in the 8x8 grid.
|
||||
*
|
||||
* void Max7219_init();
|
||||
* void Max7219_PutByte(uint8_t data);
|
||||
* void Max7219(uint8_t reg, uint8_t data);
|
||||
* void Max7219_LED_On( int8_t row, int8_t col);
|
||||
* void Max7219_LED_Off( int8_t row, int8_t col);
|
||||
* void Max7219_LED_Toggle( int8_t row, int8_t col);
|
||||
* void Max7219_Clear_Row( int8_t row);
|
||||
* void Max7219_Clear_Column( int8_t col);
|
||||
* void Max7219_Set_Row( int8_t row, int8_t val);
|
||||
* void Max7219_Set_Column( int8_t column, int8_t val);
|
||||
* void Max7219_LED_Set(uint8_t row, uint8_t col, bool on);
|
||||
* void Max7219_LED_On(uint8_t row, uint8_t col);
|
||||
* void Max7219_LED_Off(uint8_t row, uint8_t col);
|
||||
* void Max7219_LED_Toggle(uint8_t row, uint8_t col);
|
||||
* void Max7219_Clear_Row(uint8_t row);
|
||||
* void Max7219_Clear_Column(uint8_t col);
|
||||
* void Max7219_Set_Row(uint8_t row, uint8_t val);
|
||||
* void Max7219_Set_Column(uint8_t col, uint8_t val);
|
||||
* void Max7219_idle_tasks();
|
||||
*/
|
||||
|
||||
#ifndef __MAX7219_DEBUG_LEDS_H__
|
||||
#define __MAX7219_DEBUG_LEDS_H__
|
||||
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
//
|
||||
// define max7219 registers
|
||||
//
|
||||
@ -62,24 +66,23 @@
|
||||
#define max7219_reg_digit6 0x07
|
||||
#define max7219_reg_digit7 0x08
|
||||
|
||||
#define max7219_reg_intensity 0x0a
|
||||
#define max7219_reg_displayTest 0x0f
|
||||
#define max7219_reg_intensity 0x0A
|
||||
#define max7219_reg_displayTest 0x0F
|
||||
#define max7219_reg_decodeMode 0x09
|
||||
#define max7219_reg_scanLimit 0x0b
|
||||
#define max7219_reg_shutdown 0x0c
|
||||
|
||||
#define max7219_reg_scanLimit 0x0B
|
||||
#define max7219_reg_shutdown 0x0C
|
||||
|
||||
void Max7219_init();
|
||||
void Max7219_PutByte(uint8_t data);
|
||||
void Max7219(uint8_t reg, uint8_t data);
|
||||
void Max7219_LED_On( int8_t row, int8_t col);
|
||||
void Max7219_LED_Off( int8_t row, int8_t col);
|
||||
void Max7219_LED_Toggle( int8_t row, int8_t col);
|
||||
void Max7219_Clear_Row( int8_t row);
|
||||
void Max7219_Clear_Column( int8_t col);
|
||||
void Max7219_Set_Row( int8_t row, uint8_t val);
|
||||
void Max7219_Set_Column( int8_t col, uint8_t val);
|
||||
void Max7219(const uint8_t reg, const uint8_t data);
|
||||
void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on);
|
||||
void Max7219_LED_On(const uint8_t row, const uint8_t col);
|
||||
void Max7219_LED_Off(const uint8_t row, const uint8_t col);
|
||||
void Max7219_LED_Toggle(const uint8_t row, const uint8_t col);
|
||||
void Max7219_Clear_Row(const uint8_t row);
|
||||
void Max7219_Clear_Column(const uint8_t col);
|
||||
void Max7219_Set_Row(const uint8_t row, const uint8_t val);
|
||||
void Max7219_Set_Column(const uint8_t col, const uint8_t val);
|
||||
void Max7219_idle_tasks();
|
||||
#endif
|
||||
|
||||
|
||||
#endif // __MAX7219_DEBUG_LEDS_H__
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1372,29 +1372,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1396,29 +1396,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1385,29 +1385,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1385,29 +1385,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1385,29 +1385,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1385,29 +1385,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1390,29 +1390,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1385,29 +1385,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,32 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
@ -1383,29 +1383,31 @@
|
||||
#endif // I2C_POSITION_ENCODERS
|
||||
|
||||
/**
|
||||
* Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on
|
||||
* eBay for under $2.00 (including shipping) and only require 3 signal wires.
|
||||
* MAX7219 Debug Matrix
|
||||
*
|
||||
* Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0
|
||||
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
|
||||
* display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
|
||||
*
|
||||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
|
||||
//#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define Max7219_data_in 57 // 78 on Re-ARM
|
||||
#define Max7219_load 44 // 79 on Re-ARM
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
|
||||
/*
|
||||
* These are sample debug features that can be turned on and configured for your use.
|
||||
* The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts.
|
||||
/**
|
||||
* Sample debug features
|
||||
* If you add more debug displays, be careful to avoid conflicts!
|
||||
*/
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix
|
||||
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
|
||||
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
|
||||
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row
|
||||
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix
|
||||
// If you have stuttering on your Delta printer, this option may help you understand how
|
||||
// various tweaks you make to your configuration are affecting the printer.
|
||||
#define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row
|
||||
// If you experience stuttering, reboots, etc. this option can reveal how
|
||||
// tweaks made to the configuration are affecting the printer in real-time.
|
||||
#endif
|
||||
|
||||
#endif // CONFIGURATION_ADV_H
|
||||
|
||||
Loading…
Reference in New Issue
Block a user