CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Comment on filament runout sensor config

Browse Source
This commit is contained in:
Scott Lahteine 2016-12-23 19:14:22 -08:00
parent 922c67f17d
commit 5ab7b91615
21 changed files with 189 additions and 147 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Marlin/Configuration.h
View File

@ -725,13 +725,15 @@
#define Y_MAX_POS 200 #define Y_MAX_POS 200
#define Z_MAX_POS 200 #define Z_MAX_POS 200
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/Cartesio/Configuration.h
View File

@ -725,13 +725,15 @@
#define Y_MAX_POS 270 #define Y_MAX_POS 270
#define Z_MAX_POS 400 #define Z_MAX_POS 400
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/Felix/Configuration.h
View File

@ -708,13 +708,15 @@
#define Y_MAX_POS 205 #define Y_MAX_POS 205
#define Z_MAX_POS 235 #define Z_MAX_POS 235
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/Felix/DUAL/Configuration.h
View File

@ -708,13 +708,15 @@
#define Y_MAX_POS 205 #define Y_MAX_POS 205
#define Z_MAX_POS 235 #define Z_MAX_POS 235
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/Hephestos/Configuration.h
View File

@ -717,13 +717,15 @@
#define Y_MAX_POS 210 #define Y_MAX_POS 210
#define Z_MAX_POS 180 #define Z_MAX_POS 180
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/Hephestos_2/Configuration.h
View File

@ -719,13 +719,15 @@
#define Y_MAX_POS 297 #define Y_MAX_POS 297
#define Z_MAX_POS 210 #define Z_MAX_POS 210
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/K8200/Configuration.h
View File

@ -754,13 +754,15 @@
#define Y_MAX_POS 200 #define Y_MAX_POS 200
#define Z_MAX_POS 200 #define Z_MAX_POS 200
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/K8400/Configuration.h
View File

@ -725,13 +725,15 @@
#define Y_MAX_POS 200 #define Y_MAX_POS 200
#define Z_MAX_POS 190 #define Z_MAX_POS 190
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/K8400/Dual-head/Configuration.h
View File

@ -725,13 +725,15 @@
#define Y_MAX_POS 200 #define Y_MAX_POS 200
#define Z_MAX_POS 190 #define Z_MAX_POS 190
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View File

@ -725,13 +725,15 @@
#define Y_MAX_POS 200 #define Y_MAX_POS 200
#define Z_MAX_POS 200 #define Z_MAX_POS 200
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/RigidBot/Configuration.h
View File

@ -724,13 +724,15 @@
#define Y_MAX_POS 248 // RigidBot regular is 248mm, RigitBot Big is 304mm #define Y_MAX_POS 248 // RigidBot regular is 248mm, RigitBot Big is 304mm
#define Z_MAX_POS 254 // RigidBot regular and Big are 254mm #define Z_MAX_POS 254 // RigidBot regular and Big are 254mm
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/SCARA/Configuration.h
View File

@ -740,13 +740,15 @@
#define Y_MAX_POS 200 #define Y_MAX_POS 200
#define Z_MAX_POS 225 #define Z_MAX_POS 225
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/TAZ4/Configuration.h
View File

@ -746,13 +746,15 @@
#define Y_MAX_POS 275 #define Y_MAX_POS 275
#define Z_MAX_POS 250 #define Z_MAX_POS 250
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/WITBOX/Configuration.h
View File

@ -717,13 +717,15 @@
#define Y_MAX_POS 210 #define Y_MAX_POS 210
#define Z_MAX_POS 200 #define Z_MAX_POS 200
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View File

@ -725,13 +725,15 @@
#define Y_MAX_POS 200 #define Y_MAX_POS 200
#define Z_MAX_POS 200 #define Z_MAX_POS 200
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/delta/generic/Configuration.h
View File

@ -811,13 +811,15 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS #define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS #define Z_MAX_POS MANUAL_Z_HOME_POS
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View File

@ -814,13 +814,15 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS #define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS #define Z_MAX_POS MANUAL_Z_HOME_POS
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View File

@ -813,13 +813,15 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS #define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS #define Z_MAX_POS MANUAL_Z_HOME_POS
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View File

@ -817,13 +817,15 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS #define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS #define Z_MAX_POS MANUAL_Z_HOME_POS
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/makibox/Configuration.h
View File

@ -728,13 +728,15 @@
#define Y_MAX_POS 150 #define Y_MAX_POS 150
#define Z_MAX_POS 86 #define Z_MAX_POS 86
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.

16
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View File

@ -721,13 +721,15 @@
#define Y_MAX_POS 205 #define Y_MAX_POS 205
#define Z_MAX_POS 120 #define Z_MAX_POS 120
//=========================================================================== /**
//========================= Filament Runout Sensor ========================== * Filament Runout Sensor
//=========================================================================== * A mechanical or opto endstop is used to check for the presence of filament.
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament *
// RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * RAMPS-based boards use SERVO3_PIN.
// It is assumed that when logic high = filament available * For other boards you may need to define FIL_RUNOUT_PIN.
// when logic low = filament ran out * By default the firmware assumes HIGH = has filament, LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.