Add menu item Tune > Advance K (#16488)
This commit is contained in:
thisiskeithb
Scott Lahteine
parent
5ac9d9754e
commit
5beca89412
@ -114,9 +114,8 @@ void menu_cancelobject();
|
||||
#if EXTRUDERS == 1
|
||||
EDIT_ITEM(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
|
||||
#elif EXTRUDERS > 1
|
||||
#define EDIT_ADVANCE_K(N) EDIT_ITEM_N(float52, N, MSG_ADVANCE_K_E, &planner.extruder_advance_K[N], 0, 999)
|
||||
for (uint8_t n = 0; n < EXTRUDERS; n++)
|
||||
EDIT_ADVANCE_K(n);
|
||||
EDIT_ITEM_N(float52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@ -124,12 +123,10 @@ void menu_cancelobject();
|
||||
EDIT_ITEM(bool, MSG_VOLUMETRIC_ENABLED, &parser.volumetric_enabled, planner.calculate_volumetric_multipliers);
|
||||
|
||||
if (parser.volumetric_enabled) {
|
||||
#if EXTRUDERS == 1
|
||||
EDIT_ITEM_FAST(float43, MSG_FILAMENT_DIAM, &planner.filament_size[0], 1.5f, 3.25f, planner.calculate_volumetric_multipliers);
|
||||
#elif EXTRUDERS > 1
|
||||
#define EDIT_FIL_DIAM(N) EDIT_ITEM_FAST_N(float43, N, MSG_FILAMENT_DIAM_E, &planner.filament_size[N], 1.5f, 3.25f, planner.calculate_volumetric_multipliers)
|
||||
EDIT_ITEM_FAST(float43, MSG_FILAMENT_DIAM, &planner.filament_size[active_extruder], 1.5f, 3.25f, planner.calculate_volumetric_multipliers);
|
||||
for (uint8_t n = 0; n < EXTRUDERS; n++) EDIT_FIL_DIAM(n);
|
||||
EDIT_ITEM_FAST(float43, MSG_FILAMENT_DIAM, &planner.filament_size[active_extruder], 1.5f, 3.25f, planner.calculate_volumetric_multipliers);
|
||||
#if EXTRUDERS > 1
|
||||
for (uint8_t n = 0; n < EXTRUDERS; n++)
|
||||
EDIT_ITEM_FAST_N(float43, n, MSG_FILAMENT_DIAM_E, &planner.filament_size[n], 1.5f, 3.25f, planner.calculate_volumetric_multipliers);
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
@ -143,20 +140,16 @@ void menu_cancelobject();
|
||||
#endif
|
||||
;
|
||||
|
||||
#if EXTRUDERS == 1
|
||||
EDIT_ITEM_FAST(float3, MSG_FILAMENT_UNLOAD, &fc_settings[0].unload_length, 0, extrude_maxlength);
|
||||
#elif EXTRUDERS > 1
|
||||
#define EDIT_FIL_UNLOAD(N) EDIT_ITEM_FAST_N(float3, N, MSG_FILAMENTUNLOAD_E, &fc_settings[N].unload_length, 0, extrude_maxlength)
|
||||
EDIT_ITEM_FAST(float3, MSG_FILAMENT_UNLOAD, &fc_settings[active_extruder].unload_length, 0, extrude_maxlength);
|
||||
for (uint8_t n = 0; n < EXTRUDERS; n++) EDIT_FIL_UNLOAD(n);
|
||||
EDIT_ITEM_FAST(float3, MSG_FILAMENT_UNLOAD, &fc_settings[active_extruder].unload_length, 0, extrude_maxlength);
|
||||
#if EXTRUDERS > 1
|
||||
for (uint8_t n = 0; n < EXTRUDERS; n++)
|
||||
EDIT_ITEM_FAST_N(float3, n, MSG_FILAMENTUNLOAD_E, &fc_settings[n].unload_length, 0, extrude_maxlength);
|
||||
#endif
|
||||
|
||||
#if EXTRUDERS == 1
|
||||
EDIT_ITEM_FAST(float3, MSG_FILAMENT_LOAD, &fc_settings[0].load_length, 0, extrude_maxlength);
|
||||
#elif EXTRUDERS > 1
|
||||
#define EDIT_FIL_LOAD(N) EDIT_ITEM_FAST_N(float3, N, MSG_FILAMENTLOAD_E, &fc_settings[N].load_length, 0, extrude_maxlength)
|
||||
EDIT_ITEM_FAST(float3, MSG_FILAMENT_LOAD, &fc_settings[active_extruder].load_length, 0, extrude_maxlength);
|
||||
for (uint8_t n = 0; n < EXTRUDERS; n++) EDIT_FIL_LOAD(n);
|
||||
EDIT_ITEM_FAST(float3, MSG_FILAMENT_LOAD, &fc_settings[active_extruder].load_length, 0, extrude_maxlength);
|
||||
#if EXTRUDERS > 1
|
||||
for (uint8_t n = 0; n < EXTRUDERS; n++)
|
||||
EDIT_ITEM_FAST_N(float3, n, MSG_FILAMENTLOAD_E, &fc_settings[n].load_length, 0, extrude_maxlength);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@ -385,12 +378,12 @@ void menu_cancelobject();
|
||||
EDIT_VMAX(B);
|
||||
EDIT_VMAX(C);
|
||||
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
#define EDIT_VMAX_E(N) EDIT_ITEM_FAST_N(float3, N, MSG_VMAX_EN, &planner.settings.max_feedrate_mm_s[E_AXIS_N(N)], 1, max_fr_edit_scaled.e)
|
||||
#if E_STEPPERS
|
||||
EDIT_ITEM_FAST(float3, MSG_VMAX_E, &planner.settings.max_feedrate_mm_s[E_AXIS_N(active_extruder)], 1, max_fr_edit_scaled.e);
|
||||
for (uint8_t n = 0; n < E_STEPPERS; n++) EDIT_VMAX_E(n);
|
||||
#elif E_STEPPERS
|
||||
EDIT_ITEM_FAST(float3, MSG_VMAX_E, &planner.settings.max_feedrate_mm_s[E_AXIS], 1, max_fr_edit_scaled.e);
|
||||
#endif
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
for (uint8_t n = 0; n < E_STEPPERS; n++)
|
||||
EDIT_ITEM_FAST_N(float3, n, MSG_VMAX_EN, &planner.settings.max_feedrate_mm_s[E_AXIS_N(n)], 1, max_fr_edit_scaled.e);
|
||||
#endif
|
||||
|
||||
// M205 S Min Feedrate
|
||||
@ -434,15 +427,14 @@ void menu_cancelobject();
|
||||
#endif
|
||||
|
||||
#define EDIT_AMAX(Q,L) EDIT_ITEM_FAST(long5_25, MSG_AMAX_##Q, &planner.settings.max_acceleration_mm_per_s2[_AXIS(Q)], L, max_accel_edit_scaled[_AXIS(Q)], []{ planner.reset_acceleration_rates(); })
|
||||
|
||||
EDIT_AMAX(A,100);
|
||||
EDIT_AMAX(B,100);
|
||||
EDIT_AMAX(C, 10);
|
||||
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
#define EDIT_AMAX_E(N) EDIT_ITEM_FAST_N(long5_25, N, MSG_AMAX_EN, &planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(N)], 100, max_accel_edit_scaled.e, []{ _reset_e_acceleration_rate(MenuItemBase::itemIndex); })
|
||||
EDIT_ITEM_FAST(long5_25, MSG_AMAX_E, &planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(active_extruder)], 100, max_accel_edit_scaled.e, []{ planner.reset_acceleration_rates(); });
|
||||
for (uint8_t n = 0; n < E_STEPPERS; n++) EDIT_AMAX_E(n);
|
||||
for (uint8_t n = 0; n < E_STEPPERS; n++)
|
||||
EDIT_ITEM_FAST_N(long5_25, n, MSG_AMAX_EN, &planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(n)], 100, max_accel_edit_scaled.e, []{ _reset_e_acceleration_rate(MenuItemBase::itemIndex); });
|
||||
#elif E_STEPPERS
|
||||
EDIT_ITEM_FAST(long5_25, MSG_AMAX_E, &planner.settings.max_acceleration_mm_per_s2[E_AXIS], 100, max_accel_edit_scaled.e, []{ planner.reset_acceleration_rates(); });
|
||||
#endif
|
||||
@ -499,9 +491,9 @@ void menu_cancelobject();
|
||||
EDIT_QSTEPS(C);
|
||||
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
#define EDIT_ESTEPS(N) EDIT_ITEM_FAST_N(float51, N, MSG_EN_STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(N)], 5, 9999, []{ _planner_refresh_e_positioning(MenuItemBase::itemIndex); })
|
||||
EDIT_ITEM_FAST(float51, MSG_E_STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(active_extruder)], 5, 9999, []{ planner.refresh_positioning(); });
|
||||
for (uint8_t n = 0; n < E_STEPPERS; n++) EDIT_ESTEPS(n);
|
||||
for (uint8_t n = 0; n < E_STEPPERS; n++)
|
||||
EDIT_ITEM_FAST_N(float51, n, MSG_EN_STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(n)], 5, 9999, []{ _planner_refresh_e_positioning(MenuItemBase::itemIndex); });
|
||||
#elif E_STEPPERS
|
||||
EDIT_ITEM_FAST(float51, MSG_E_STEPS, &planner.settings.axis_steps_per_mm[E_AXIS], 5, 9999, []{ planner.refresh_positioning(); });
|
||||
#endif
|
||||
@ -571,8 +563,8 @@ void menu_advanced_settings() {
|
||||
#if EXTRUDERS == 1
|
||||
EDIT_ITEM(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
|
||||
#elif EXTRUDERS > 1
|
||||
#define EDIT_ADVANCE_K(N) EDIT_ITEM_N(float52, N, MSG_ADVANCE_K_E, &planner.extruder_advance_K[N], 0, 999)
|
||||
for (uint8_t n = 0; n < E_STEPPERS; n++) EDIT_ADVANCE_K(n);
|
||||
for (uint8_t n = 0; n < E_STEPPERS; n++)
|
||||
EDIT_ITEM_N(float52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
@ -172,8 +172,8 @@ void menu_temperature() {
|
||||
#if HOTENDS == 1
|
||||
EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - 15, []{ thermalManager.start_watching_hotend(0); });
|
||||
#elif HOTENDS > 1
|
||||
#define EDIT_TARGET(N) EDIT_ITEM_FAST_N(int3, N, MSG_NOZZLE_N, &thermalManager.temp_hotend[N].target, 0, heater_maxtemp[N] - 15, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); })
|
||||
HOTEND_LOOP() EDIT_TARGET(e);
|
||||
HOTEND_LOOP()
|
||||
EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, heater_maxtemp[e] - 15, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
|
||||
#endif
|
||||
|
||||
#if ENABLED(SINGLENOZZLE)
|
||||
|
||||
@ -128,8 +128,8 @@ void menu_tune() {
|
||||
#if HOTENDS == 1
|
||||
EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - 15, []{ thermalManager.start_watching_hotend(0); });
|
||||
#elif HOTENDS > 1
|
||||
#define EDIT_NOZZLE(N) EDIT_ITEM_FAST_N(int3, N, MSG_NOZZLE_N, &thermalManager.temp_hotend[N].target, 0, heater_maxtemp[N] - 15, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); })
|
||||
HOTEND_LOOP() EDIT_NOZZLE(e);
|
||||
HOTEND_LOOP()
|
||||
EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, heater_maxtemp[e] - 15, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
|
||||
#endif
|
||||
|
||||
#if ENABLED(SINGLENOZZLE)
|
||||
@ -178,14 +178,26 @@ void menu_tune() {
|
||||
|
||||
//
|
||||
// Flow:
|
||||
// Flow [1-5]:
|
||||
//
|
||||
#if EXTRUDERS == 1
|
||||
EDIT_ITEM(int3, MSG_FLOW, &planner.flow_percentage[0], 10, 999, []{ planner.refresh_e_factor(0); });
|
||||
#elif EXTRUDERS
|
||||
#if EXTRUDERS
|
||||
EDIT_ITEM(int3, MSG_FLOW, &planner.flow_percentage[active_extruder], 10, 999, []{ planner.refresh_e_factor(active_extruder); });
|
||||
#define EDIT_FLOW(N) EDIT_ITEM_N(int3, N, MSG_FLOW_N, &planner.flow_percentage[N], 10, 999, []{ planner.refresh_e_factor(MenuItemBase::itemIndex); })
|
||||
for (uint8_t n = 0; n < EXTRUDERS; n++) EDIT_FLOW(n);
|
||||
// Flow En:
|
||||
#if EXTRUDERS > 1
|
||||
for (uint8_t n = 0; n < EXTRUDERS; n++)
|
||||
EDIT_ITEM_N(int3, n, MSG_FLOW_N, &planner.flow_percentage[n], 10, 999, []{ planner.refresh_e_factor(MenuItemBase::itemIndex); });
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Advance K:
|
||||
//
|
||||
#if ENABLED(LIN_ADVANCE) && DISABLED(SLIM_LCD_MENUS)
|
||||
#if EXTRUDERS == 1
|
||||
EDIT_ITEM(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
|
||||
#elif EXTRUDERS > 1
|
||||
for (uint8_t n = 0; n < EXTRUDERS; n++)
|
||||
EDIT_ITEM_N(float52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
|
||||
Loading…
Reference in New Issue
Block a user