Add a warning for DISABLE_[XYZ] options

Marlin/Configuration.h

@@ -364,6 +364,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #define E_ENABLE_ON 0 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false

Marlin/configurator/config/Configuration.h

@@ -364,6 +364,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #define E_ENABLE_ON 0 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false

Marlin/example_configurations/Felix/Configuration.h

@@ -317,6 +317,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #define E_ENABLE_ON 0 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false

Marlin/example_configurations/Felix/Configuration_DUAL.h

@@ -317,6 +317,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #define E_ENABLE_ON 0 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false

Marlin/example_configurations/Hephestos/Configuration.h

@@ -338,6 +338,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 #define E_ENABLE_ON 0 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false

Marlin/example_configurations/K8200/Configuration.h

@@ -375,6 +375,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #define E_ENABLE_ON 0 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z true

Marlin/example_configurations/SCARA/Configuration.h

@@ -369,6 +369,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #define E_ENABLE_ON 0 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false

Marlin/example_configurations/WITBOX/Configuration.h

@@ -337,6 +337,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 #define E_ENABLE_ON 0 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z true

Marlin/example_configurations/delta/generic/Configuration.h

@@ -367,6 +367,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 #define E_ENABLE_ON 0 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -367,6 +367,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #define E_ENABLE_ON 0 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false

Marlin/example_configurations/makibox/Configuration.h

@@ -337,6 +337,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #define E_ENABLE_ON 0 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -339,6 +339,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 #define E_ENABLE_ON 1 // For all extruders
 
 // Disables axis when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false