CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Cleanup pins files, fixup analogtodigitalpin, etc.

Browse Source
This commit is contained in:
Scott Lahteine 2016-05-07 18:41:20 -07:00
parent d7819298ca
commit 5ca6334fd2
38 changed files with 173 additions and 445 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Marlin/Marlin.h
View File

@ -52,11 +52,6 @@
typedef unsigned long millis_t; typedef unsigned long millis_t;
// Arduino < 1.0.0 does not define this, so we need to do it ourselves
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) ((p) + 0xA0)
#endif
#ifdef USBCON #ifdef USBCON
#include "HardwareSerial.h" #include "HardwareSerial.h"
#endif #endif

136
Marlin/pins.h
View File

@ -23,20 +23,6 @@
#ifndef PINS_H #ifndef PINS_H
#define PINS_H #define PINS_H
// Preset optional pins
#define X_MS1_PIN -1
#define X_MS2_PIN -1
#define Y_MS1_PIN -1
#define Y_MS2_PIN -1
#define Z_MS1_PIN -1
#define Z_MS2_PIN -1
#define E0_MS1_PIN -1
#define E0_MS2_PIN -1
#define E1_MS1_PIN -1
#define E1_MS2_PIN -1
#define HEATER_3_PIN -1
#define TEMP_3_PIN -1
#if MB(GEN7_CUSTOM) #if MB(GEN7_CUSTOM)
#include "pins_GEN7_CUSTOM.h" #include "pins_GEN7_CUSTOM.h"
#elif MB(GEN7_12) #elif MB(GEN7_12)
@ -157,21 +143,120 @@
#error Unknown MOTHERBOARD value set in Configuration.h #error Unknown MOTHERBOARD value set in Configuration.h
#endif #endif
// Define certain undefined pins
#ifndef X_MS1_PIN
#define X_MS1_PIN -1
#endif
#ifndef X_MS2_PIN
#define X_MS2_PIN -1
#endif
#ifndef Y_MS1_PIN
#define Y_MS1_PIN -1
#endif
#ifndef Y_MS2_PIN
#define Y_MS2_PIN -1
#endif
#ifndef Z_MS1_PIN
#define Z_MS1_PIN -1
#endif
#ifndef Z_MS2_PIN
#define Z_MS2_PIN -1
#endif
#ifndef E0_MS1_PIN
#define E0_MS1_PIN -1
#endif
#ifndef E0_MS2_PIN
#define E0_MS2_PIN -1
#endif
#ifndef E1_MS1_PIN
#define E1_MS1_PIN -1
#endif
#ifndef E1_MS2_PIN
#define E1_MS2_PIN -1
#endif
#ifndef FAN_PIN
#define FAN_PIN -1
#endif
#ifndef FAN1_PIN
#define FAN1_PIN -1
#endif
#ifndef FAN2_PIN
#define FAN2_PIN -1
#endif
#ifndef HEATER_0_PIN
#define HEATER_0_PIN -1
#endif
#ifndef HEATER_1_PIN
#define HEATER_1_PIN -1
#endif
#ifndef HEATER_2_PIN
#define HEATER_2_PIN -1
#endif
#ifndef HEATER_3_PIN
#define HEATER_3_PIN -1
#endif
#ifndef HEATER_BED_PIN
#define HEATER_BED_PIN -1
#endif
#ifndef TEMP_0_PIN
#define TEMP_0_PIN -1
#endif
#ifndef TEMP_1_PIN
#define TEMP_1_PIN -1
#endif
#ifndef TEMP_2_PIN
#define TEMP_2_PIN -1
#endif
#ifndef TEMP_3_PIN
#define TEMP_3_PIN -1
#endif
#ifndef TEMP_BED_PIN
#define TEMP_BED_PIN -1
#endif
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN -1
#endif
#ifndef SDPOWER
#define SDPOWER -1
#endif
#ifndef SDSS
#define SDSS -1
#endif
#ifndef LED_PIN
#define LED_PIN -1
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN -1
#endif
#ifndef KILL_PIN
#define KILL_PIN -1
#endif
#ifndef SUICIDE_PIN
#define SUICIDE_PIN -1
#endif
// Marlin needs to account for pins that equal -1
#define marlinAnalogInputToDigitalPin(p) ((p) == -1 ? -1 : (p) + 0xA0)
// List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! // List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, HEATER_0_PIN, analogInputToDigitalPin(TEMP_0_PIN), #define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN, HEATER_0_PIN, EXTRUDER_0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN),
#define _E1_PINS #define _E1_PINS
#define _E2_PINS #define _E2_PINS
#define _E3_PINS #define _E3_PINS
#if EXTRUDERS > 1 #if EXTRUDERS > 1
#undef _E1_PINS #undef _E1_PINS
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, HEATER_1_PIN, analogInputToDigitalPin(TEMP_1_PIN), #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, HEATER_1_PIN, E1_MS1_PIN, E1_MS2_PIN, EXTRUDER_1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN),
#if EXTRUDERS > 2 #if EXTRUDERS > 2
#undef _E2_PINS #undef _E2_PINS
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, HEATER_2_PIN, analogInputToDigitalPin(TEMP_2_PIN), #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, HEATER_2_PIN, EXTRUDER_2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN),
#if EXTRUDERS > 3 #if EXTRUDERS > 3
#undef _E3_PINS #undef _E3_PINS
#define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, HEATER_3_PIN, analogInputToDigitalPin(TEMP_3_PIN), #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, HEATER_3_PIN, EXTRUDER_3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN),
#endif #endif
#endif #endif
#elif ENABLED(Y_DUAL_STEPPER_DRIVERS) || ENABLED(Z_DUAL_STEPPER_DRIVERS) #elif ENABLED(Y_DUAL_STEPPER_DRIVERS) || ENABLED(Z_DUAL_STEPPER_DRIVERS)
@ -179,6 +264,11 @@
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN,
#endif #endif
#define BED_PINS HEATER_BED_PIN, marlinAnalogInputToDigitalPin(TEMP_BED_PIN),
//
// Assign endstop pins for boards with only 3 connectors
//
#ifdef X_STOP_PIN #ifdef X_STOP_PIN
#if X_HOME_DIR < 0 #if X_HOME_DIR < 0
#define X_MIN_PIN X_STOP_PIN #define X_MIN_PIN X_STOP_PIN
@ -209,6 +299,9 @@
#endif #endif
#endif #endif
//
// Disable unused endstop / probe pins
//
#if ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) || DISABLED(Z_MIN_PROBE_ENDSTOP) // Allow code to compile regardless of Z_MIN_PROBE_ENDSTOP setting. #if ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) || DISABLED(Z_MIN_PROBE_ENDSTOP) // Allow code to compile regardless of Z_MIN_PROBE_ENDSTOP setting.
#undef Z_MIN_PROBE_PIN #undef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN -1 #define Z_MIN_PROBE_PIN -1
@ -270,10 +363,9 @@
X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, \ X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, \
Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \ Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \
Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MIN_PROBE_PIN, \ Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MIN_PROBE_PIN, \
PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, CONTROLLERFAN_PIN, \ PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLERFAN_PIN, \
EXTRUDER_0_AUTO_FAN_PIN, EXTRUDER_1_AUTO_FAN_PIN, EXTRUDER_2_AUTO_FAN_PIN, EXTRUDER_3_AUTO_FAN_PIN, \ _E0_PINS _E1_PINS _E2_PINS _E3_PINS BED_PINS \
_E0_PINS _E1_PINS _E2_PINS _E3_PINS \ X_MS1_PIN, X_MS2_PIN, Y_MS1_PIN, Y_MS2_PIN, Z_MS1_PIN, Z_MS2_PIN \
analogInputToDigitalPin(TEMP_BED_PIN) \
} }
#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS)) #define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))

20
Marlin/pins_5DPRINT.h
View File

@ -54,8 +54,6 @@
#define E0_ENABLE_PIN 17 #define E0_ENABLE_PIN 17
#define HEATER_0_PIN 21 // Extruder #define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed #define HEATER_BED_PIN 20 // Bed
// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h // You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h
// for the fan and Teensyduino uses a different pin mapping. // for the fan and Teensyduino uses a different pin mapping.
@ -64,14 +62,6 @@
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering #define TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering #define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define SDPOWER -1
#define LED_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
// The SDSS pin uses a different pin mapping from file Sd2PinMap.h // The SDSS pin uses a different pin mapping from file Sd2PinMap.h
#define SDSS 20 #define SDSS 20
@ -85,15 +75,6 @@
// Microstepping pins // Microstepping pins
// Note that the pin mapping is not from fastio.h // Note that the pin mapping is not from fastio.h
// See Sd2PinMap.h for the pin configurations // See Sd2PinMap.h for the pin configurations
#undef X_MS1_PIN
#undef X_MS2_PIN
#undef Y_MS1_PIN
#undef Y_MS2_PIN
#undef Z_MS1_PIN
#undef Z_MS2_PIN
#undef E0_MS1_PIN
#undef E0_MS2_PIN
#define X_MS1_PIN 25 #define X_MS1_PIN 25
#define X_MS2_PIN 26 #define X_MS2_PIN 26
#define Y_MS1_PIN 9 #define Y_MS1_PIN 9
@ -102,4 +83,3 @@
#define Z_MS2_PIN 6 #define Z_MS2_PIN 6
#define E0_MS1_PIN 5 #define E0_MS1_PIN 5
#define E0_MS2_PIN 4 #define E0_MS2_PIN 4

8
Marlin/pins_99.h
View File

@ -43,18 +43,10 @@
#define E0_DIR_PIN 66 #define E0_DIR_PIN 66
#define E0_ENABLE_PIN -1 #define E0_ENABLE_PIN -1
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN -1
#define FAN_PIN -1
#define PS_ON_PIN 9 #define PS_ON_PIN 9
#define KILL_PIN -1
#define HEATER_0_PIN 13 #define HEATER_0_PIN 13
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define TEMP_0_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define HEATER_BED_PIN 4 #define HEATER_BED_PIN 4
#define TEMP_BED_PIN 10 #define TEMP_BED_PIN 10

18
Marlin/pins_A4JP.h
View File

@ -38,18 +38,6 @@
#define SLED_PIN -1 #define SLED_PIN -1
#endif #endif
#undef X_MS1_PIN
#undef X_MS2_PIN
#undef Y_MS1_PIN
#undef Y_MS2_PIN
#undef Z_MS1_PIN
#undef Z_MS2_PIN
#undef E0_MS1_PIN
#undef E0_MS2_PIN
#undef E1_MS1_PIN
#undef E1_MS2_PIN
#undef DIGIPOTSS_PIN
//Fan_2 2 //Fan_2 2
/***************** /*****************
@ -108,9 +96,6 @@
#define HEATER_0_PIN 9 #define HEATER_0_PIN 9
#define TEMP_0_PIN 0 #define TEMP_0_PIN 0
#define HEATER_1_PIN 7 #define HEATER_1_PIN 7
#define TEMP_1_PIN -1
#define HEATER_2_PIN -1
#define TEMP_2_PIN -1
#define E0_STEP_PIN 34 #define E0_STEP_PIN 34
#define E0_DIR_PIN 43 #define E0_DIR_PIN 43
@ -126,13 +111,10 @@
#define DIGIPOTSS_PIN 38 #define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 8 #define FAN_PIN 8
#define PS_ON_PIN 4 #define PS_ON_PIN 4
#define KILL_PIN -1
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#define FAN_0_PIN 6 //Glen #define FAN_0_PIN 6 //Glen
#define FAN_1_PIN 2 //Glen #define FAN_1_PIN 2 //Glen

8
Marlin/pins_BRAINWAVE.h
View File

@ -55,21 +55,13 @@
#define E0_ATT_PIN 20 #define E0_ATT_PIN 20
#define HEATER_0_PIN 4 // Extruder #define HEATER_0_PIN 4 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 38 // Bed #define HEATER_BED_PIN 38 // Bed
#define FAN_PIN 3 // Fan #define FAN_PIN 3 // Fan
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering #define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering #define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define SDPOWER -1
#define SDSS -1
#define LED_PIN 39 #define LED_PIN 39
#define PS_ON_PIN -1
#define KILL_PIN -1
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support

6
Marlin/pins_BRAINWAVE_PRO.h
View File

@ -60,21 +60,15 @@
#define E0_ENABLE_PIN 13 #define E0_ENABLE_PIN 13
#define HEATER_0_PIN 15 #define HEATER_0_PIN 15
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 14 // Bed #define HEATER_BED_PIN 14 // Bed
#define FAN_PIN 16 // Fan, PWM #define FAN_PIN 16 // Fan, PWM
#define TEMP_0_PIN 2 // Extruder / Analog pin numbering #define TEMP_0_PIN 2 // Extruder / Analog pin numbering
#define TEMP_1_PIN 1 // Spare / Analog pin numbering #define TEMP_1_PIN 1 // Spare / Analog pin numbering
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering #define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#define SDPOWER -1
#define SDSS 20 #define SDSS 20
#define LED_PIN 19 #define LED_PIN 19
#define PS_ON_PIN -1
#define KILL_PIN -1
#define SD_DETECT_PIN 12 #define SD_DETECT_PIN 12
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)

29
Marlin/pins_CHEAPTRONIC.h
View File

@ -35,27 +35,20 @@
#define X_DIR_PIN 15 #define X_DIR_PIN 15
#define X_ENABLE_PIN 24 #define X_ENABLE_PIN 24
// X endstop
#define X_MIN_PIN 3
#define X_MAX_PIN -1
// Y motor stepper // Y motor stepper
#define Y_STEP_PIN 35 #define Y_STEP_PIN 35
#define Y_DIR_PIN 36 #define Y_DIR_PIN 36
#define Y_ENABLE_PIN 31 #define Y_ENABLE_PIN 31
// Y endstop
#define Y_MIN_PIN 2
#define Y_MAX_PIN -1
// Z motor stepper // Z motor stepper
#define Z_STEP_PIN 40 #define Z_STEP_PIN 40
#define Z_DIR_PIN 41 #define Z_DIR_PIN 41
#define Z_ENABLE_PIN 37 #define Z_ENABLE_PIN 37
// Z endstop // XYZ endstops
#define Z_MIN_PIN 5 #define X_STOP_PIN 3
#define Z_MAX_PIN -1 #define Y_STOP_PIN 2
#define Z_STOP_PIN 5
// Extruder 0 stepper // Extruder 0 stepper
#define E0_STEP_PIN 26 #define E0_STEP_PIN 26
@ -67,27 +60,14 @@
#define E1_DIR_PIN 34 #define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30 #define E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS -1
#define LED_PIN -1
// FAN
#define FAN_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 19 // EXTRUDER 1 #define HEATER_0_PIN 19 // EXTRUDER 1
#define HEATER_1_PIN 23 // EXTRUDER 2 #define HEATER_1_PIN 23 // EXTRUDER 2
// HeatedBad
#define HEATER_BED_PIN 22 #define HEATER_BED_PIN 22
// Cheaptronic v1.0 hasent EXTRUDER 3
#define HEATER_2_PIN -1
// Temperature sensors // Temperature sensors
#define TEMP_0_PIN 15 #define TEMP_0_PIN 15
#define TEMP_1_PIN 14 #define TEMP_1_PIN 14
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 13 #define TEMP_BED_PIN 13
// Cheaptronic v1.0 doesn't support LCD // Cheaptronic v1.0 doesn't support LCD
@ -108,4 +88,3 @@
#define BLEN_A 0 #define BLEN_A 0
// Cheaptronic v1.0 doesn't use this // Cheaptronic v1.0 doesn't use this
#define SD_DETECT_PIN -1

5
Marlin/pins_ELEFU_3.h
View File

@ -58,9 +58,6 @@
#define E0_DIR_PIN 41 #define E0_DIR_PIN 41
#define E0_ENABLE_PIN 37 #define E0_ENABLE_PIN 37
#define SDPOWER -1
#define LED_PIN -1 //Use +12V Aux port for LED Ring
#define FAN_PIN 16 //5V PWM #define FAN_PIN 16 //5V PWM
#define PS_ON_PIN 10 //Set to -1 if using a manual switch on the PWRSW Connector #define PS_ON_PIN 10 //Set to -1 if using a manual switch on the PWRSW Connector
@ -77,8 +74,6 @@
#define BEEPER_PIN 36 #define BEEPER_PIN 36
#define KILL_PIN -1
// M240 Triggers a camera by emulating a Canon RC-1 Remote // M240 Triggers a camera by emulating a Canon RC-1 Remote
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // Data from: http://www.doc-diy.net/photo/rc-1_hacked/
#define PHOTOGRAPH_PIN 29 #define PHOTOGRAPH_PIN 29

15
Marlin/pins_GEN3_MONOLITHIC.h
View File

@ -62,22 +62,7 @@
#define HEATER_0_PIN 16 #define HEATER_0_PIN 16
#define TEMP_0_PIN 0 #define TEMP_0_PIN 0
#define FAN_PIN -1
// bed pins
#define HEATER_BED_PIN -1
#define TEMP_BED_PIN -1
#define SDSS -1
#define SDPOWER -1
#define LED_PIN -1
// pin for controlling the PSU. // pin for controlling the PSU.
#define PS_ON_PIN 14 // Alex, Do this work on the card? #define PS_ON_PIN 14 // Alex, Do this work on the card?
// Alex extras from Gen3+ // Alex extras from Gen3+
#define KILL_PIN -1
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define HEATER_2_PIN -1

9
Marlin/pins_GEN3_PLUS.h
View File

@ -43,12 +43,7 @@
#define E0_STEP_PIN 17 #define E0_STEP_PIN 17
#define E0_DIR_PIN 21 #define E0_DIR_PIN 21
#define LED_PIN -1
#define FAN_PIN -1
#define PS_ON_PIN 14 #define PS_ON_PIN 14
#define KILL_PIN -1
#define HEATER_0_PIN 12 // (extruder) #define HEATER_0_PIN 12 // (extruder)
@ -59,9 +54,5 @@
#define E0_ENABLE_PIN 13 #define E0_ENABLE_PIN 13
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) #define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) #define TEMP_BED_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define SDPOWER -1
#define SDSS 4 #define SDSS 4
#define HEATER_2_PIN -1

15
Marlin/pins_GEN6.h
View File

@ -53,28 +53,15 @@
#define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715 #define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715
#define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715 #define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410 #define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
#define TEMP_1_PIN -1 //changed @ rkoeppl 20110410
#define TEMP_2_PIN -1 //changed @ rkoeppl 20110410
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410 #define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#if MB(GEN6) #if !MB(GEN6)
#define HEATER_BED_PIN -1 //changed @ rkoeppl 20110410
#define TEMP_BED_PIN -1 //changed @ rkoeppl 20110410
#else
#define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410 #define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
#define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410 #define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410
#endif #endif
#define SDPOWER -1
#define SDSS 17 #define SDSS 17
#define LED_PIN -1 //changed @ rkoeppl 20110410
#define FAN_PIN -1 //changed @ rkoeppl 20110410
#define PS_ON_PIN -1 //changed @ rkoeppl 20110410
#define KILL_PIN -1 //changed @ drakelive 20120830
//our pin for debugging. //our pin for debugging.
#define DEBUG_PIN 0 #define DEBUG_PIN 0

15
Marlin/pins_GEN7_12.h
View File

@ -57,25 +57,14 @@
#define E0_ENABLE_PIN 24 #define E0_ENABLE_PIN 24
#define TEMP_0_PIN 1 #define TEMP_0_PIN 1
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 2 #define TEMP_BED_PIN 2
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 3 #define HEATER_BED_PIN 3
#define KILL_PIN -1
#define SDPOWER -1 // Gen7 v1.3 removed the fan pin
#define SDSS -1 // SCL pin of I2C header #if GEN7_VERSION < 13
#define LED_PIN -1
#if (GEN7_VERSION >= 13)
// Gen7 v1.3 removed the fan pin
#define FAN_PIN -1
#else
#define FAN_PIN 31 #define FAN_PIN 31
#endif #endif

13
Marlin/pins_GEN7_14.h
View File

@ -54,23 +54,11 @@
#define E0_ENABLE_PIN 25 #define E0_ENABLE_PIN 25
#define TEMP_0_PIN 1 #define TEMP_0_PIN 1
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 0 #define TEMP_BED_PIN 0
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 3 #define HEATER_BED_PIN 3
#define KILL_PIN -1
#define SDPOWER -1
#define SDSS -1 // SCL pin of I2C header
#define LED_PIN -1
#define FAN_PIN -1
#define PS_ON_PIN 15 #define PS_ON_PIN 15
//our pin for debugging. //our pin for debugging.
@ -79,4 +67,3 @@
//our RS485 pins //our RS485 pins
#define TX_ENABLE_PIN 12 #define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13 #define RX_ENABLE_PIN 13

10
Marlin/pins_GEN7_CUSTOM.h
View File

@ -55,20 +55,13 @@
#define E0_ENABLE_PIN 24 #define E0_ENABLE_PIN 24
#define TEMP_0_PIN 2 #define TEMP_0_PIN 2
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 3 // (bed) #define HEATER_BED_PIN 3 // (bed)
#define SDPOWER -1
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support #define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
#define LED_PIN -1
#define FAN_PIN -1
#define PS_ON_PIN 19 #define PS_ON_PIN 19
//our pin for debugging. //our pin for debugging.
@ -79,10 +72,7 @@
//#define RX_ENABLE_PIN 13 //#define RX_ENABLE_PIN 13
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#define SD_DETECT_PIN -1
#define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work
#define KILL_PIN -1
//Pins for 4bit LCD Support //Pins for 4bit LCD Support
#define LCD_PINS_RS 18 #define LCD_PINS_RS 18
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17

5
Marlin/pins_LEAPFROG.h
View File

@ -54,13 +54,9 @@
#define E1_DIR_PIN 40 //40 #define E1_DIR_PIN 40 //40
#define E1_ENABLE_PIN 36 //36 #define E1_ENABLE_PIN 36 //36
#define SDPOWER -1
#define SDSS 11 #define SDSS 11
#define SD_DETECT_PIN -1 // 10 optional also used as mode pin
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 7 #define FAN_PIN 7
#define PS_ON_PIN -1
#define KILL_PIN -1
#define SOL1_PIN 16 #define SOL1_PIN 16
#define SOL2_PIN 17 #define SOL2_PIN 17
@ -69,7 +65,6 @@
#define HEATER_2_PIN 11 //-1 // 13 #define HEATER_2_PIN 11 //-1 // 13
#define TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN 15 // 1 #define TEMP_1_PIN 15 // 1
#define TEMP_2_PIN -1 // 2
#define HEATER_BED_PIN 10 // 14/15 #define HEATER_BED_PIN 10 // 14/15
#define TEMP_BED_PIN 14 // 1,2 or I2C #define TEMP_BED_PIN 14 // 1,2 or I2C
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */

5
Marlin/pins_MEGACONTROLLER.h
View File

@ -63,7 +63,6 @@
#define E1_DIR_PIN 27 #define E1_DIR_PIN 27
#define E1_ENABLE_PIN 25 #define E1_ENABLE_PIN 25
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
@ -72,12 +71,9 @@
#define FAN2_PIN 36 #define FAN2_PIN 36
#define FAN_SOFT_PWM #define FAN_SOFT_PWM
#define CONTROLLERFAN_PIN FAN2_PIN #define CONTROLLERFAN_PIN FAN2_PIN
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 29 // EXTRUDER 1 #define HEATER_0_PIN 29 // EXTRUDER 1
#define HEATER_1_PIN 34 // EXTRUDER 2 #define HEATER_1_PIN 34 // EXTRUDER 2
#define HEATER_2_PIN -1
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // ANALOG NUMBERING #define TEMP_0_PIN 4 // ANALOG NUMBERING
@ -85,7 +81,6 @@
#define TEMP_0_PIN 0 // ANALOG NUMBERING #define TEMP_0_PIN 0 // ANALOG NUMBERING
#endif #endif
#if TEMP_SENSOR_1 == -1 #if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 5 // ANALOG NUMBERING #define TEMP_1_PIN 5 // ANALOG NUMBERING
#else #else

8
Marlin/pins_MEGATRONICS.h
View File

@ -56,28 +56,22 @@
#define E1_DIR_PIN 36 #define E1_DIR_PIN 36
#define E1_ENABLE_PIN 30 #define E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 7 // IO pin. Buffer needed #define FAN_PIN 7 // IO pin. Buffer needed
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define KILL_PIN -1
#define HEATER_0_PIN 9 #define HEATER_0_PIN 9
#define HEATER_1_PIN 8 #define HEATER_1_PIN 8
#define HEATER_2_PIN -1 #define HEATER_BED_PIN 10 // BED
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 8 // ANALOG NUMBERING #define TEMP_0_PIN 8 // ANALOG NUMBERING
#else #else
#define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_0_PIN 13 // ANALOG NUMBERING
#endif #endif
#define TEMP_1_PIN 15 // ANALOG NUMBERING #define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 10 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define BEEPER_PIN 33 // AUX-4 #define BEEPER_PIN 33 // AUX-4

21
Marlin/pins_MEGATRONICS_2.h
View File

@ -60,45 +60,36 @@
#define E2_DIR_PIN 24 #define E2_DIR_PIN 24
#define E2_ENABLE_PIN 22 #define E2_ENABLE_PIN 22
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 7 #define FAN_PIN 7
#define FAN2_PIN 6 #define FAN2_PIN 6
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define KILL_PIN -1
#define HEATER_0_PIN 9 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_2_PIN -1
#define HEATER_0_PIN 9 // EXTRUDER 1
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // ANALOG NUMBERING #define TEMP_0_PIN 4 // ANALOG NUMBERING
#else #else
#define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_0_PIN 13 // ANALOG NUMBERING
#endif #endif
#define HEATER_1_PIN 8 // EXTRUDER 2
#if TEMP_SENSOR_1 == -1 #if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 8 // ANALOG NUMBERING #define TEMP_1_PIN 8 // ANALOG NUMBERING
#else #else
#define TEMP_1_PIN 15 // ANALOG NUMBERING #define TEMP_1_PIN 15 // ANALOG NUMBERING
#endif #endif
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 10 // BED #define HEATER_BED_PIN 10 // BED
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // ANALOG NUMBERING #define TEMP_BED_PIN 8 // ANALOG NUMBERING
#else #else
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif #endif
#define BEEPER_PIN 64 #define BEEPER_PIN 64
#define LCD_PINS_RS 14 #define LCD_PINS_RS 14
#define LCD_PINS_ENABLE 15 #define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 30 #define LCD_PINS_D4 30
@ -106,7 +97,6 @@
#define LCD_PINS_D6 32 #define LCD_PINS_D6 32
#define LCD_PINS_D7 33 #define LCD_PINS_D7 33
// Buttons are directly attached using keypad // Buttons are directly attached using keypad
#define BTN_EN1 61 #define BTN_EN1 61
#define BTN_EN2 59 #define BTN_EN2 59
@ -116,4 +106,3 @@
#define BLEN_B 1 #define BLEN_B 1
#define BLEN_A 0 #define BLEN_A 0
#define SD_DETECT_PIN -1 // Megatronics doesn't use this

28
Marlin/pins_MEGATRONICS_3.h
View File

@ -30,7 +30,6 @@
#define LARGE_FLASH true #define LARGE_FLASH true
#if ENABLED(Z_PROBE_SLED) #if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1 #define SLED_PIN -1
#endif #endif
@ -71,12 +70,10 @@
#define E2_DIR_PIN 60 #define E2_DIR_PIN 60
#define E2_ENABLE_PIN 23 #define E2_ENABLE_PIN 23
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define KILL_PIN -1
#define HEATER_0_PIN 2 #define HEATER_0_PIN 2
#define HEATER_1_PIN 9 #define HEATER_1_PIN 9
@ -85,10 +82,26 @@
#define FAN_PIN 6 #define FAN_PIN 6
#define FAN2_PIN 7 #define FAN2_PIN 7
#define TEMP_0_PIN (TEMP_SENSOR_0 == -1 ? 11 : 15) // ANALOG NUMBERING #if TEMP_SENSOR_0 == -1
#define TEMP_1_PIN (TEMP_SENSOR_1 == -1 ? 10 : 13) // ANALOG NUMBERING #define TEMP_0_PIN 11 // ANALOG NUMBERING
#define TEMP_2_PIN (TEMP_SENSOR_2 == -1 ? 9 : 12) // ANALOG NUMBERING #else
#define TEMP_BED_PIN (TEMP_SENSOR_BED == -1 ? 8 : 14) // ANALOG NUMBERING #define TEMP_0_PIN 15 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 10 // ANALOG NUMBERING
#else
#define TEMP_1_PIN 13 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_2 == -1
#define TEMP_2_PIN 9 // ANALOG NUMBERING
#else
#define TEMP_2_PIN 12 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // ANALOG NUMBERING
#else
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif
#define BEEPER_PIN 61 #define BEEPER_PIN 61
@ -113,4 +126,3 @@
#define BLEN_B 1 #define BLEN_B 1
#define BLEN_A 0 #define BLEN_A 0
#define SD_DETECT_PIN -1 // Megatronics doesn't use this

22
Marlin/pins_MINIRAMBO.h
View File

@ -30,18 +30,6 @@
#define LARGE_FLASH true #define LARGE_FLASH true
#undef X_MS1_PIN
#undef X_MS2_PIN
#undef Y_MS1_PIN
#undef Y_MS2_PIN
#undef Z_MS1_PIN
#undef Z_MS2_PIN
#undef E0_MS1_PIN
#undef E0_MS2_PIN
#undef E1_MS1_PIN
#undef E1_MS2_PIN
#define X_STEP_PIN 37 #define X_STEP_PIN 37
#define X_DIR_PIN 48 #define X_DIR_PIN 48
#define X_MIN_PIN 12 #define X_MIN_PIN 12
@ -77,12 +65,8 @@
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
#define HEATER_2_PIN 6 #define HEATER_2_PIN 6
#else
#define HEATER_2_PIN -1
#endif #endif
#define TEMP_2_PIN -1
#define E0_STEP_PIN 34 #define E0_STEP_PIN 34
#define E0_DIR_PIN 43 #define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26 #define E0_ENABLE_PIN 26
@ -92,8 +76,6 @@
#define E1_STEP_PIN -1 #define E1_STEP_PIN -1
#define E1_DIR_PIN -1 #define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1 #define E1_ENABLE_PIN -1
#define E1_MS1_PIN -1
#define E1_MS2_PIN -1
#define MOTOR_CURRENT_PWM_XY_PIN 46 #define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN 45 #define MOTOR_CURRENT_PWM_Z_PIN 45
@ -101,14 +83,10 @@
//Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range //Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#define MOTOR_CURRENT_PWM_RANGE 2000 #define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 8 #define FAN_PIN 8
#define FAN_1_PIN 6 #define FAN_1_PIN 6
#define PS_ON_PIN -1
#define KILL_PIN -1 // 80 with Smart Controller LCD
#define SUICIDE_PIN -1 // PIN that has to be turned on right after start, to keep power flowing.
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)

22
Marlin/pins_MINITRONICS.h
View File

@ -60,27 +60,19 @@
#define E2_DIR_PIN -1 #define E2_DIR_PIN -1
#define E2_ENABLE_PIN -1 #define E2_ENABLE_PIN -1
#define SDPOWER -1
#define SDSS 16 #define SDSS 16
#define LED_PIN 46 #define LED_PIN 46
#define FAN_PIN 9 #define FAN_PIN 9
#define FAN2_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 7 // EXTRUDER 1 #define TEMP_0_PIN 7 // ANALOG NUMBERING
#define HEATER_1_PIN 8 // EXTRUDER 2 #define TEMP_1_PIN 6 // ANALOG NUMBERING
#define HEATER_2_PIN -1
#define TEMP_0_PIN 7 // ANALOG NUMBERING
#define TEMP_1_PIN 6 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 3 // BED
#define TEMP_BED_PIN 6 // ANALOG NUMBERING #define TEMP_BED_PIN 6 // ANALOG NUMBERING
#define HEATER_0_PIN 7 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#define LCD_PINS_RS -1 #define LCD_PINS_RS -1
@ -90,7 +82,6 @@
#define LCD_PINS_D6 -1 #define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1 #define LCD_PINS_D7 -1
// Buttons are directly attached using keypad // Buttons are directly attached using keypad
#define BTN_EN1 -1 #define BTN_EN1 -1
#define BTN_EN2 -1 #define BTN_EN2 -1
@ -100,4 +91,3 @@
#define BLEN_B 1 #define BLEN_B 1
#define BLEN_A 0 #define BLEN_A 0
#define SD_DETECT_PIN -1 // Minitronics doesn't use this

13
Marlin/pins_OMCA.h
View File

@ -90,23 +90,14 @@
#define E2_DIR_PIN -1 // 20 #define E2_DIR_PIN -1 // 20
#define E2_ENABLE_PIN -1 // 18 #define E2_ENABLE_PIN -1 // 18
#define SDPOWER -1
#define SDSS 11 #define SDSS 11
#define SD_DETECT_PIN -1 // 10 optional also used as mode pin
#define LED_PIN -1
#define FAN_PIN 14 // PWM on MIDDLE connector #define FAN_PIN 14 // PWM on MIDDLE connector
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 3 // DONE PWM on RIGHT connector #define HEATER_0_PIN 3 // DONE PWM on RIGHT connector
#define HEATER_1_PIN -1 #define HEATER_BED_PIN 4
#define HEATER_2_PIN -1
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define TEMP_0_PIN 0 // ANALOG INPUT NUMBERING #define TEMP_0_PIN 0 // ANALOG INPUT NUMBERING
#define TEMP_1_PIN 1 // ANALOG #define TEMP_1_PIN 1 // ANALOG
#define TEMP_2_PIN -1 // 2
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 2 // 1,2 or I2C #define TEMP_BED_PIN 2 // 1,2 or I2C
#define I2C_SCL 16 #define I2C_SCL 16

12
Marlin/pins_OMCA_A.h
View File

@ -81,20 +81,10 @@
#define E2_DIR_PIN -1 // 16 #define E2_DIR_PIN -1 // 16
#define E2_ENABLE_PIN 24 #define E2_ENABLE_PIN 24
#define SDPOWER -1
#define SDSS 11 #define SDSS 11
#define SD_DETECT_PIN -1 // 10 optional also used as mode pin
#define LED_PIN -1
#define FAN_PIN 3 #define FAN_PIN 3
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_1_PIN -1 // 12
#define HEATER_2_PIN -1 // 13
#define TEMP_0_PIN 0 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 0 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN -1 // 1
#define TEMP_2_PIN -1 // 2
#define HEATER_BED_PIN -1 // 14/15
#define TEMP_BED_PIN -1 // 1,2 or I2C
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */

7
Marlin/pins_PRINTRBOARD.h
View File

@ -81,16 +81,9 @@
#define FILWIDTH_PIN 2 // ANALOG NUMBERING #define FILWIDTH_PIN 2 // ANALOG NUMBERING
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
////LCD Pin Setup//// ////LCD Pin Setup////
#define SDPOWER -1
#define SDSS 26 #define SDSS 26
#define LED_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support

8
Marlin/pins_PRINTRBOARD_REVF.h
View File

@ -75,17 +75,9 @@
#define FILWIDTH_PIN 2 // ANALOG NUMBERING #define FILWIDTH_PIN 2 // ANALOG NUMBERING
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
////LCD Pin Setup//// ////LCD Pin Setup////
#define SDPOWER -1
#define SDSS 20 // Teensylu pin mapping #define SDSS 20 // Teensylu pin mapping
#define LED_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#define ALARM_PIN -1
// uncomment to enable an I2C based DAC like on the Printrboard REVF // uncomment to enable an I2C based DAC like on the Printrboard REVF
#define DAC_STEPPER_CURRENT #define DAC_STEPPER_CURRENT

18
Marlin/pins_RAMBO.h
View File

@ -40,17 +40,6 @@
#define SLED_PIN -1 #define SLED_PIN -1
#endif #endif
#undef X_MS1_PIN
#undef X_MS2_PIN
#undef Y_MS1_PIN
#undef Y_MS2_PIN
#undef Z_MS1_PIN
#undef Z_MS2_PIN
#undef E0_MS1_PIN
#undef E0_MS2_PIN
#undef E1_MS1_PIN
#undef E1_MS2_PIN
#define X_STEP_PIN 37 #define X_STEP_PIN 37
#define X_DIR_PIN 48 #define X_DIR_PIN 48
#define X_MIN_PIN 12 #define X_MIN_PIN 12
@ -86,12 +75,8 @@
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
#define HEATER_2_PIN 6 #define HEATER_2_PIN 6
#else
#define HEATER_2_PIN -1
#endif #endif
#define TEMP_2_PIN -1
#define E0_STEP_PIN 34 #define E0_STEP_PIN 34
#define E0_DIR_PIN 43 #define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26 #define E0_ENABLE_PIN 26
@ -107,7 +92,6 @@
#define DIGIPOTSS_PIN 38 #define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 8 #define FAN_PIN 8
@ -121,8 +105,6 @@
Fan_2 2 Fan_2 2
***********************************************************/ ***********************************************************/
#define PS_ON_PIN 4 #define PS_ON_PIN 4
#define KILL_PIN -1 //80 with Smart Controller LCD
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)

20
Marlin/pins_RAMPS_14.h
View File

@ -87,7 +87,6 @@
#define E1_DIR_PIN 34 #define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30 #define E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
@ -125,27 +124,18 @@
#define HEATER_0_PIN 8 #define HEATER_0_PIN 8
#else #else
#define HEATER_0_PIN 10 // EXTRUDER 1 #define HEATER_0_PIN 10 // EXTRUDER 1
#if !MB(RAMPS_14_EEF) && !MB(RAMPS_13_EEF) && !MB(RAMPS_14_SF) && !MB(RAMPS_13_SF)
#define HEATER_BED_PIN 8 // BED
#endif
#endif #endif
#if MB(RAMPS_14_SF) || MB(RAMPS_13_SF) || ENABLED(IS_RAMPS_EFB) #if !MB(RAMPS_14_SF) && !MB(RAMPS_13_SF) && !ENABLED(IS_RAMPS_EFB)
#define HEATER_1_PIN -1
#else
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter) #define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
#endif #endif
#define HEATER_2_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING #define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
#if MB(RAMPS_14_EFF) || MB(RAMPS_14_EEF) || MB(RAMPS_14_SF) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF) || MB(RAMPS_13_SF)
#define HEATER_BED_PIN -1 // NO BED
#else
#define HEATER_BED_PIN 8 // BED
#endif
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#if ENABLED(Z_PROBE_SLED) #if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1 #define SLED_PIN -1

6
Marlin/pins_RAMPS_OLD.h
View File

@ -56,8 +56,6 @@
#define SDPOWER 48 #define SDPOWER 48
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define PS_ON_PIN -1
#define KILL_PIN -1
#if ENABLED(RAMPS_V_1_0) // RAMPS_V_1_0 #if ENABLED(RAMPS_V_1_0) // RAMPS_V_1_0
#define HEATER_0_PIN 12 // RAMPS 1.0 #define HEATER_0_PIN 12 // RAMPS 1.0
@ -69,11 +67,7 @@
#define FAN_PIN 9 // RAMPS 1.1 #define FAN_PIN 9 // RAMPS 1.1
#endif #endif
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple

21
Marlin/pins_RUMBA.h
View File

@ -77,10 +77,7 @@
#define PS_ON_PIN 45 #define PS_ON_PIN 45
#define KILL_PIN 46 #define KILL_PIN 46
#if TEMP_SENSOR_0 == 0 #if TEMP_SENSOR_0 != 0
#define TEMP_0_PIN -1
#define HEATER_0_PIN -1
#else
#define HEATER_0_PIN 2 // EXTRUDER 1 #define HEATER_0_PIN 2 // EXTRUDER 1
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used #define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used
@ -89,10 +86,7 @@
#endif #endif
#endif #endif
#if TEMP_SENSOR_1 == 0 #if TEMP_SENSOR_1 != 0
#define TEMP_1_PIN -1
#define HEATER_1_PIN -1
#else
#define HEATER_1_PIN 3 // EXTRUDER 2 #define HEATER_1_PIN 3 // EXTRUDER 2
#if TEMP_SENSOR_1 == -1 #if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 5 // ANALOG NUMBERING - connector *K2* on RUMBA thermocouple ADD ON is used #define TEMP_1_PIN 5 // ANALOG NUMBERING - connector *K2* on RUMBA thermocouple ADD ON is used
@ -101,10 +95,7 @@
#endif #endif
#endif #endif
#if TEMP_SENSOR_2 == 0 #if TEMP_SENSOR_2 != 0
#define TEMP_2_PIN -1
#define HEATER_2_PIN -1
#else
#define HEATER_2_PIN 6 // EXTRUDER 3 #define HEATER_2_PIN 6 // EXTRUDER 3
#if TEMP_SENSOR_2 == -1 #if TEMP_SENSOR_2 == -1
#define TEMP_2_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple #define TEMP_2_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple
@ -116,10 +107,7 @@
//optional for extruder 4 or chamber: #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used //optional for extruder 4 or chamber: #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used
//optional FAN1 can be used as 4th heater output: #define HEATER_3_PIN 8 // EXTRUDER 4 //optional FAN1 can be used as 4th heater output: #define HEATER_3_PIN 8 // EXTRUDER 4
#if TEMP_SENSOR_BED == 0 #if TEMP_SENSOR_BED != 0
#define TEMP_BED_PIN -1
#define HEATER_BED_PIN -1
#else
#define HEATER_BED_PIN 9 // BED #define HEATER_BED_PIN 9 // BED
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple #define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple
@ -128,7 +116,6 @@
#endif #endif
#endif #endif
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#define BEEPER_PIN 44 #define BEEPER_PIN 44

26
Marlin/pins_SANGUINOLOLU_11.h
View File

@ -43,28 +43,21 @@
#define E0_STEP_PIN 1 #define E0_STEP_PIN 1
#define E0_DIR_PIN 0 #define E0_DIR_PIN 0
#define LED_PIN -1
#define FAN_PIN -1
#if MB(AZTEEG_X1) || MB(STB_11) || MB(MELZI) #if MB(AZTEEG_X1) || MB(STB_11) || MB(MELZI)
#define FAN_PIN 4 // Works for Panelolu2 too #define FAN_PIN 4 // Works for Panelolu2 too
#if MB(MELZI) #endif
#define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368.
#elif MB(STB_11) #if MB(MELZI)
#define LCD_PIN_BL 17 // LCD backlight LED #define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368.
#endif #elif MB(STB_11)
#define LCD_PIN_BL 17 // LCD backlight LED
#endif #endif
#if ENABLED(Z_PROBE_SLED) #if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1 #define SLED_PIN -1
#endif #endif
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 13 // (extruder) #define HEATER_0_PIN 13 // (extruder)
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#if ENABLED(SANGUINOLOLU_V_1_2) #if ENABLED(SANGUINOLOLU_V_1_2)
@ -89,10 +82,7 @@
#endif #endif
#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) #define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) #define TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define SDPOWER -1
#define SDSS 31 #define SDSS 31
/** /**
@ -190,7 +180,3 @@
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
#endif // MAKRPANEL #endif // MAKRPANEL
// #if FAN_PIN == 12 || FAN_PIN ==13
//#define FAN_SOFT_PWM
// #endif

11
Marlin/pins_SAV_MKI.h
View File

@ -53,12 +53,9 @@
#define E0_ENABLE_PIN 19 #define E0_ENABLE_PIN 19
#define HEATER_0_PIN 21 // Extruder #define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed #define HEATER_BED_PIN 20 // Bed
#define FAN_PIN 16 // Fan -- from Teensyduino environment. #define FAN_PIN 16 // Fan -- from Teensyduino environment.
// For the fan and Teensyduino uses a different pin mapping. // For the fan and Teensyduino uses a different pin mapping.
#define X_STOP_PIN 13 #define X_STOP_PIN 13
#define Y_STOP_PIN 14 #define Y_STOP_PIN 14
//#define Z_STOP_PIN 15 //#define Z_STOP_PIN 15
@ -67,9 +64,6 @@
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering #define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering #define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 9 #define SCK_PIN 9
@ -104,11 +98,6 @@
#define EXT_AUX_A4_IO 44 // Digital IO, 42 (teensy), 44 (marlin) #define EXT_AUX_A4_IO 44 // Digital IO, 42 (teensy), 44 (marlin)
#define SDPOWER -1
#define LED_PIN -1
#define PS_ON_PIN -1
#define SD_DETECT_PIN -1
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#define LCD_PINS_RS -1 #define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1 #define LCD_PINS_ENABLE -1

9
Marlin/pins_SETHI.h
View File

@ -57,20 +57,11 @@
#define E0_ENABLE_PIN 24 #define E0_ENABLE_PIN 24
#define TEMP_0_PIN 1 #define TEMP_0_PIN 1
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 2 #define TEMP_BED_PIN 2
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 3 #define HEATER_BED_PIN 3
#define KILL_PIN -1
#define SDPOWER -1
#define SDSS -1 // SCL pin of I2C header
#define LED_PIN -1
#if (GEN7_VERSION >= 13) #if (GEN7_VERSION >= 13)
// Gen7 v1.3 removed the fan pin // Gen7 v1.3 removed the fan pin

7
Marlin/pins_TEENSY2.h
View File

@ -93,8 +93,6 @@
#define E0_ENABLE_PIN 26 // Shared w/x #define E0_ENABLE_PIN 26 // Shared w/x
#define HEATER_0_PIN 15 // 21 // Extruder #define HEATER_0_PIN 15 // 21 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 14 // 20 // Bed #define HEATER_BED_PIN 14 // 20 // Bed
#define FAN_PIN 16 // 22 // Fan #define FAN_PIN 16 // 22 // Fan
@ -104,15 +102,10 @@
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering #define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering #define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define SDPOWER -1
#define SD_DETECT_PIN -1
#define SDSS 20 // 8 #define SDSS 20 // 8
#define LED_PIN 6 #define LED_PIN 6
#define PS_ON_PIN 27 #define PS_ON_PIN 27
#define KILL_PIN -1
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support

7
Marlin/pins_TEENSYLU.h
View File

@ -72,14 +72,7 @@
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering #define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering #define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define SDPOWER -1
#define SDSS 8 #define SDSS 8
#define LED_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support

7
Marlin/pins_ULTIMAIN_2.h
View File

@ -55,9 +55,6 @@
#define HEATER_1_PIN 3 #define HEATER_1_PIN 3
#define TEMP_1_PIN 9 #define TEMP_1_PIN 9
#define HEATER_2_PIN -1
#define TEMP_2_PIN -1
#define E0_STEP_PIN 42 #define E0_STEP_PIN 42
#define E0_DIR_PIN 43 #define E0_DIR_PIN 43
#define E0_ENABLE_PIN 37 #define E0_ENABLE_PIN 37
@ -66,13 +63,9 @@
#define E1_DIR_PIN 47 #define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48 #define E1_ENABLE_PIN 48
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN 8 #define LED_PIN 8
#define FAN_PIN 7 #define FAN_PIN 7
#define PS_ON_PIN -1
#define KILL_PIN -1
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#define SAFETY_TRIGGERED_PIN 28 //PIN to detect the safety circuit has triggered #define SAFETY_TRIGGERED_PIN 28 //PIN to detect the safety circuit has triggered
#define MAIN_VOLTAGE_MEASURE_PIN 14 //Analogue PIN to measure the main voltage, with a 100k - 4k7 resitor divider. #define MAIN_VOLTAGE_MEASURE_PIN 14 //Analogue PIN to measure the main voltage, with a 100k - 4k7 resitor divider.

5
Marlin/pins_ULTIMAKER.h
View File

@ -62,9 +62,6 @@
#define HEATER_1_PIN 3 #define HEATER_1_PIN 3
#define TEMP_1_PIN 9 #define TEMP_1_PIN 9
#define HEATER_2_PIN -1
#define TEMP_2_PIN -1
#define E0_STEP_PIN 43 #define E0_STEP_PIN 43
#define E0_DIR_PIN 45 #define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41 #define E0_ENABLE_PIN 41
@ -73,12 +70,10 @@
#define E1_DIR_PIN 47 #define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48 #define E1_ENABLE_PIN 48
#define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 7 #define FAN_PIN 7
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define KILL_PIN -1
#define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing. #define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing.
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)

18
Marlin/pins_ULTIMAKER_OLD.h
View File

@ -51,17 +51,11 @@
#define Z_MAX_PIN 18 #define Z_MAX_PIN 18
#define Z_ENABLE_PIN 35 #define Z_ENABLE_PIN 35
#define HEATER_BED_PIN -1
#define TEMP_BED_PIN -1
#define HEATER_0_PIN 2
#define TEMP_0_PIN 8 #define TEMP_0_PIN 8
#define HEATER_1_PIN 1
#define TEMP_1_PIN 1 #define TEMP_1_PIN 1
#define HEATER_2_PIN -1 #define HEATER_0_PIN 2
#define TEMP_2_PIN -1 #define HEATER_1_PIN 1
#define E0_STEP_PIN 43 #define E0_STEP_PIN 43
#define E0_DIR_PIN 45 #define E0_DIR_PIN 45
@ -71,14 +65,6 @@
#define E1_DIR_PIN -1 #define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1 #define E1_ENABLE_PIN -1
#define SDPOWER -1
#define SDSS -1
#define LED_PIN -1
#define FAN_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#define LCD_PINS_RS 24 #define LCD_PINS_RS 24
#define LCD_PINS_ENABLE 22 #define LCD_PINS_ENABLE 22
#define LCD_PINS_D4 36 #define LCD_PINS_D4 36