Update Czech advanced pause

This commit is contained in:
Petr Zahradník 2018-02-15 20:22:22 +01:00
parent c78e1c0f23
commit 5d9e16ea49
2 changed files with 30 additions and 0 deletions

View File

@ -235,6 +235,8 @@
#define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E na mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Prum.")
#define MSG_FILAMENT_UNLOAD _UxGT("Vysunout mm")
#define MSG_FILAMENT_LOAD _UxGT("Zavest mm")
#define MSG_ADVANCE_K _UxGT("K pro posun")
#define MSG_CONTRAST _UxGT("Kontrast LCD")
#define MSG_STORE_EEPROM _UxGT("Ulozit nastaveni")
@ -268,6 +270,10 @@
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
#define MSG_FILAMENTCHANGE _UxGT("Vymenit filament")
#define MSG_FILAMENTLOAD _UxGT("Zavest filament")
#define MSG_FILAMENTUNLOAD _UxGT("Vysunout filament")
#define MSG_FILAMENTUNLOAD_ALL _UxGT("Vysunout vse")
#define MSG_INIT_SDCARD _UxGT("Nacist SD kartu")
#define MSG_CNG_SDCARD _UxGT("Vymenit SD kartu")
#define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl")
@ -348,10 +354,16 @@
#define MSG_DRIVE_STRENGTH _UxGT("Buzeni motoru")
#define MSG_DAC_PERCENT _UxGT("Motor %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Ulozit do EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("TISK POZASTAVEN")
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("ZAVEDENI FILAMENTU")
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("VYSUNUTI FILAMENTU")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("MOŽNOSTI OBNOVENI:")
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Vytlacit vic")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ")
#define MSG_ERR_HOMING_FAILED _UxGT("Parkovani selhalo")
#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala")
#define MSG_M600_TOO_COLD _UxGT("M600: Moc studený")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
@ -371,6 +383,8 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cekejte prosim")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedeni")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyckejte na")
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlaceni")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Cekejte prosim")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokracovani")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku")
@ -381,6 +395,7 @@
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vlozte, kliknete")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahrivani...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavadeni...")
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlacovani...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokracovani...")
#endif // LCD_HEIGHT < 4

View File

@ -238,6 +238,8 @@
#define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E na mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Prum.")
#define MSG_FILAMENT_UNLOAD _UxGT("Vysunout mm")
#define MSG_FILAMENT_LOAD _UxGT("Zavést mm")
#define MSG_ADVANCE_K _UxGT("K pro posun")
#define MSG_CONTRAST _UxGT("Kontrast LCD")
#define MSG_STORE_EEPROM _UxGT("Uložit nastavení")
@ -271,6 +273,10 @@
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
#define MSG_FILAMENTCHANGE _UxGT("Vyměnit filament")
#define MSG_FILAMENTLOAD _UxGT("Zavést filament")
#define MSG_FILAMENTUNLOAD _UxGT("Vysunout filament")
#define MSG_FILAMENTUNLOAD_ALL _UxGT("Vysunout vše")
#define MSG_INIT_SDCARD _UxGT("Načíst SD kartu")
#define MSG_CNG_SDCARD _UxGT("Vyměnit SD kartu")
#define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl")
@ -351,10 +357,16 @@
#define MSG_DRIVE_STRENGTH _UxGT("Buzení motorů")
#define MSG_DAC_PERCENT _UxGT("Motor %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Uložit do EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("TISK POZASTAVEN")
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("ZAVEDENÍ FILAMENTU")
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("VYSUNUTÍ FILAMENTU")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("MOŽNOSTI OBNOVENÍ:")
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Vytlačit víc")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ")
#define MSG_ERR_HOMING_FAILED _UxGT("Parkování selhalo")
#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala")
#define MSG_M600_TOO_COLD _UxGT("M600: Moc studený")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
@ -374,6 +386,8 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedení")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyčkejte na")
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlačení")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračování")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku")
@ -384,6 +398,7 @@
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, klikněte")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahřívání...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádění...")
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačování...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...")
#endif // LCD_HEIGHT < 4