Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712)

This commit is contained in:
jmdearras 2019-04-15 23:55:33 -04:00 committed by Scott Lahteine
parent 9b578ca343
commit 5f49b65c1f
81 changed files with 893 additions and 40 deletions

View File

@ -905,6 +905,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -1,3 +1,24 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef TARGET_LPC1768 #ifdef TARGET_LPC1768
#include <usb/usb.h> #include <usb/usb.h>

View File

@ -185,13 +185,9 @@
// //
// SD Support // SD Support
// //
//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB #if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
//#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB #define LPC_SD_ONBOARD
#endif
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin
// for the onboard card. Init card from LCD menu or send M21 whenever printer
// is powered on to enable SD access.
#if ENABLED(LPC_SD_LCD) #if ENABLED(LPC_SD_LCD)

View File

@ -208,15 +208,24 @@
#define LCD_PINS_D7 P1_23 #define LCD_PINS_D7 P1_23
#endif #endif
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P1_21
#define DOGLCD_A0 P1_22
#endif
#endif #endif
#endif // ULTRA_LCD #endif // ULTRA_LCD
//#define USB_SD_DISABLED //
#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device // SD Support
//
#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD #if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
//#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board #undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#define LPC_SD_LCD
#endif
#if ENABLED(LPC_SD_LCD) #if ENABLED(LPC_SD_LCD)

View File

@ -105,18 +105,29 @@
#define LCD_PINS_RS P0_16 #define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18 #define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15 #define LCD_PINS_D4 P0_15
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P2_06
#define DOGLCD_A0 P0_16
#endif
#endif #endif
// //
// SD Support // SD Support
// //
//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB // MKS_MINI_12864 strongly prefers the SD card on the display and
#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB // requires jumpers on the SKR V1.1 board as documented here:
// https://www.facebook.com/groups/505736576548648/permalink/630639874058317/
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD #if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin #if ENABLED(MKS_MINI_12864)
// for the onboard card. Init card from LCD menu or send M21 whenever printer #define LPC_SD_LCD
// is powered on to enable SD access. #undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#else
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif
#endif
#if ENABLED(LPC_SD_LCD) #if ENABLED(LPC_SD_LCD)

View File

@ -158,23 +158,11 @@
#define ENET_TXD0 P1_00 // J12-11 #define ENET_TXD0 P1_00 // J12-11
#define ENET_TXD1 P1_01 // J12-12 #define ENET_TXD1 P1_01 // J12-12
/** #if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
* The SBase can share the on-board SD card with a PC via USB the following #undef USB_SD_DISABLED
* definitions control this feature: #define USB_SD_ONBOARD
*/ #define LPC_SD_ONBOARD
//#define USB_SD_DISABLED #endif
#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device
/**
* There are a number of configurations available for the SBase SD card reader.
* - A custom cable can be used to allow access to the LCD based SD card.
* - A standard cable can be used for access to the LCD SD card (but no SD detect).
* - The onboard SD card can be used and optionally shared with a PC via USB.
*/
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
#define LPC_SD_ONBOARD // Marlin uses the SD drive attached to the control board
#if ENABLED(LPC_SD_CUSTOM_CABLE) #if ENABLED(LPC_SD_CUSTOM_CABLE)

View File

@ -361,11 +361,14 @@
#define ENET_TXD0 P1_00 // (78) J12-11 #define ENET_TXD0 P1_00 // (78) J12-11
#define ENET_TXD1 P1_01 // (79) J12-12 #define ENET_TXD1 P1_01 // (79) J12-12
//#define USB_SD_DISABLED //
#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device // SD Support
//
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD #if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board #undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif
#if ENABLED(LPC_SD_LCD) #if ENABLED(LPC_SD_LCD)

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -911,6 +911,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -912,6 +912,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -903,6 +903,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -911,6 +911,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -911,6 +911,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -908,6 +908,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -920,6 +920,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -906,6 +906,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -906,6 +906,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -906,6 +906,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -906,6 +906,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -906,6 +906,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -906,6 +906,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -906,6 +906,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -906,6 +906,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -906,6 +906,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -905,6 +905,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -906,6 +906,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

View File

@ -908,6 +908,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1' // Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER //#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**