minor improvements

Configuration_store.cpp - changed a couple of print statements so the
values were printed.  The old method resulted in the formula being
printed.

ubl_G29
1) added support for R option to P4.  Now probes all points unless R is
present and the number is greater than 0.

2) P2 - moved map print statement so it showed the point that was
currently being probed,  The old location did this only for the first
point.

3) P4 - Moved the map print for the same reason.

ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
This commit is contained in:
Bob-the-Kuhn 2017-04-14 23:47:11 -05:00 committed by Roxy-3D
parent 5a97a7be97
commit 60471b7592
3 changed files with 13 additions and 8 deletions

View File

@ -1339,8 +1339,8 @@ void MarlinSettings::reset() {
SERIAL_ECHOLNPGM("UBL_MESH_MAX_X " STRINGIFY(UBL_MESH_MAX_X)); SERIAL_ECHOLNPGM("UBL_MESH_MAX_X " STRINGIFY(UBL_MESH_MAX_X));
SERIAL_ECHOLNPGM("UBL_MESH_MAX_Y " STRINGIFY(UBL_MESH_MAX_Y)); SERIAL_ECHOLNPGM("UBL_MESH_MAX_Y " STRINGIFY(UBL_MESH_MAX_Y));
SERIAL_ECHOLNPGM("MESH_X_DIST " STRINGIFY(MESH_X_DIST)); SERIAL_ECHOLNPAIR("MESH_X_DIST ", MESH_X_DIST);
SERIAL_ECHOLNPGM("MESH_Y_DIST " STRINGIFY(MESH_Y_DIST)); SERIAL_ECHOLNPAIR("MESH_Y_DIST ", MESH_Y_DIST);
SERIAL_EOL; SERIAL_EOL;
} }

View File

@ -47,6 +47,7 @@
extern float meshedit_done; extern float meshedit_done;
extern long babysteps_done; extern long babysteps_done;
extern float code_value_float(); extern float code_value_float();
extern uint8_t code_value_byte();
extern bool code_value_bool(); extern bool code_value_bool();
extern bool code_has_value(); extern bool code_has_value();
extern float probe_pt(float x, float y, bool, int); extern float probe_pt(float x, float y, bool, int);
@ -920,8 +921,6 @@
float last_x = -9999.99, last_y = -9999.99; float last_x = -9999.99, last_y = -9999.99;
mesh_index_pair location; mesh_index_pair location;
do { do {
if (do_ubl_mesh_map) ubl.display_map(map_type);
location = find_closest_mesh_point_of_type(INVALID, lx, ly, 0, NULL, false); // The '0' says we want to use the nozzle's position location = find_closest_mesh_point_of_type(INVALID, lx, ly, 0, NULL, false); // The '0' says we want to use the nozzle's position
// It doesn't matter if the probe can't reach the NAN location. This is a manual probe. // It doesn't matter if the probe can't reach the NAN location. This is a manual probe.
if (location.x_index < 0 && location.y_index < 0) continue; if (location.x_index < 0 && location.y_index < 0) continue;
@ -955,6 +954,8 @@
KEEPALIVE_STATE(PAUSED_FOR_USER); KEEPALIVE_STATE(PAUSED_FOR_USER);
ubl.has_control_of_lcd_panel = true; ubl.has_control_of_lcd_panel = true;
if (do_ubl_mesh_map) ubl.display_map(map_type); // show user where we're probing
while (!ubl_lcd_clicked()) { // we need the loop to move the nozzle based on the encoder wheel here! while (!ubl_lcd_clicked()) { // we need the loop to move the nozzle based on the encoder wheel here!
idle(); idle();
if (ubl.encoder_diff) { if (ubl.encoder_diff) {
@ -1364,6 +1365,10 @@
} }
void fine_tune_mesh(const float &lx, const float &ly, const bool do_ubl_mesh_map) { void fine_tune_mesh(const float &lx, const float &ly, const bool do_ubl_mesh_map) {
// do all mesh points unless R option has a value of 1 or more
repetition_cnt = code_seen('R') && code_has_value() ? code_value_byte() : GRID_MAX_POINTS_X * GRID_MAX_POINTS_Y;
if (repetition_cnt == 0) repetition_cnt = GRID_MAX_POINTS_X * GRID_MAX_POINTS_Y;
mesh_index_pair location; mesh_index_pair location;
uint16_t not_done[16]; uint16_t not_done[16];
int32_t round_off; int32_t round_off;
@ -1376,8 +1381,6 @@
do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE); do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE);
do_blocking_move_to_xy(lx, ly); do_blocking_move_to_xy(lx, ly);
do { do {
if (do_ubl_mesh_map) ubl.display_map(map_type);
location = find_closest_mesh_point_of_type(SET_IN_BITMAP, lx, ly, 0, not_done, false); // The '0' says we want to use the nozzle's position location = find_closest_mesh_point_of_type(SET_IN_BITMAP, lx, ly, 0, not_done, false); // The '0' says we want to use the nozzle's position
// It doesn't matter if the probe can not reach this // It doesn't matter if the probe can not reach this
// location. This is a manual edit of the Mesh Point. // location. This is a manual edit of the Mesh Point.
@ -1408,6 +1411,8 @@
KEEPALIVE_STATE(PAUSED_FOR_USER); KEEPALIVE_STATE(PAUSED_FOR_USER);
ubl.has_control_of_lcd_panel = true; ubl.has_control_of_lcd_panel = true;
if (do_ubl_mesh_map) ubl.display_map(map_type); // show the user which point is being adjusted
lcd_implementation_clear(); lcd_implementation_clear();
lcd_mesh_edit_setup(new_z); lcd_mesh_edit_setup(new_z);

View File

@ -915,12 +915,12 @@ void kill_screen(const char* lcd_msg) {
} }
void _lcd_mesh_edit() { void _lcd_mesh_edit() {
_lcd_mesh_fine_tune(PSTR("Mesh Editor: ")); _lcd_mesh_fine_tune(PSTR("Mesh Editor"));
} }
float lcd_mesh_edit() { float lcd_mesh_edit() {
lcd_goto_screen(_lcd_mesh_edit_NOP); lcd_goto_screen(_lcd_mesh_edit_NOP);
_lcd_mesh_fine_tune(PSTR("Mesh Editor: ")); _lcd_mesh_fine_tune(PSTR("Mesh Editor"));
return mesh_edit_value; return mesh_edit_value;
} }