Fewer Teensy 3.1/3.2 tests
This commit is contained in:
parent
18c9182903
commit
6285776943
@ -26,8 +26,11 @@ case $TESTENV in
|
|||||||
lpc9) TESTENV='LPC1769' ;;
|
lpc9) TESTENV='LPC1769' ;;
|
||||||
mega) TESTENV='megaatmega2560' ;;
|
mega) TESTENV='megaatmega2560' ;;
|
||||||
stm) TESTENV='STM32F1' ;;
|
stm) TESTENV='STM32F1' ;;
|
||||||
|
teensy) TESTENV='teensy31' ;;
|
||||||
|
t31) TESTENV='teensy31' ;;
|
||||||
|
t32) TESTENV='teensy31' ;;
|
||||||
t35) TESTENV='teensy35' ;;
|
t35) TESTENV='teensy35' ;;
|
||||||
teensy) TESTENV='teensy35' ;;
|
t36) TESTENV='teensy35' ;;
|
||||||
-) ;;
|
-) ;;
|
||||||
esac
|
esac
|
||||||
|
|
||||||
|
@ -19,96 +19,14 @@ restore_configs
|
|||||||
opt_set MOTHERBOARD BOARD_TEENSY31_32
|
opt_set MOTHERBOARD BOARD_TEENSY31_32
|
||||||
opt_set TEMP_SENSOR_0 1
|
opt_set TEMP_SENSOR_0 1
|
||||||
opt_set TEMP_SENSOR_BED 1
|
opt_set TEMP_SENSOR_BED 1
|
||||||
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
|
opt_enable EEPROM_SETTINGS FILAMENT_WIDTH_SENSOR CALIBRATION_GCODE BAUD_RATE_GCODE \
|
||||||
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE \
|
|
||||||
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||||
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
|
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET PRINTCOUNTER SLOW_PWM_HEATERS PIDTEMPBED \
|
||||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER \
|
INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER \
|
||||||
ADVANCED_PAUSE_FEATURE ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES PARK_HEAD_ON_PAUSE \
|
NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PARK_HEAD_ON_PAUSE \
|
||||||
|
ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \
|
||||||
PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
|
PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
|
||||||
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
|
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
|
||||||
opt_set I2C_SLAVE_ADDRESS 63
|
opt_set I2C_SLAVE_ADDRESS 63
|
||||||
opt_set GRID_MAX_POINTS_X 16
|
opt_set GRID_MAX_POINTS_X 16
|
||||||
exec_test $1 $2 "Teensy3.1 with many features"
|
exec_test $1 $2 "Teensy3.1 with many features"
|
||||||
|
|
||||||
#
|
|
||||||
# Test a Sled Z Probe with Linear leveling
|
|
||||||
#
|
|
||||||
restore_configs
|
|
||||||
opt_set MOTHERBOARD BOARD_TEENSY31_32
|
|
||||||
opt_enable EEPROM_SETTINGS Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
|
|
||||||
exec_test $1 $2 "Sled Z Probe with Linear leveling"
|
|
||||||
|
|
||||||
#
|
|
||||||
# Test a Servo Probe
|
|
||||||
#
|
|
||||||
# restore_configs
|
|
||||||
# opt_set MOTHERBOARD BOARD_TEENSY31_32
|
|
||||||
# opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
|
|
||||||
# AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
|
||||||
# opt_set NUM_SERVOS 1
|
|
||||||
# exec_test $1 $2 "Servo Probe"
|
|
||||||
#
|
|
||||||
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
|
|
||||||
#
|
|
||||||
# opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS \
|
|
||||||
# EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
|
|
||||||
# exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
|
|
||||||
|
|
||||||
#
|
|
||||||
# Test MAGNETIC_PARKING_EXTRUDER with LCD
|
|
||||||
#
|
|
||||||
restore_configs
|
|
||||||
opt_set MOTHERBOARD BOARD_TEENSY31_32
|
|
||||||
opt_set EXTRUDERS 2
|
|
||||||
opt_set TEMP_SENSOR_1 1
|
|
||||||
opt_enable MAGNETIC_PARKING_EXTRUDER ULTIMAKERCONTROLLER
|
|
||||||
exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD"
|
|
||||||
|
|
||||||
#
|
|
||||||
# Mixing Extruder
|
|
||||||
#
|
|
||||||
restore_configs
|
|
||||||
opt_set MOTHERBOARD BOARD_TEENSY31_32
|
|
||||||
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
|
||||||
opt_set MIXING_STEPPERS 2
|
|
||||||
exec_test $1 $2 "Mixing Extruder"
|
|
||||||
|
|
||||||
#
|
|
||||||
# Test SWITCHING_EXTRUDER
|
|
||||||
#
|
|
||||||
# restore_configs
|
|
||||||
# opt_set MOTHERBOARD BOARD_TEENSY31_32
|
|
||||||
# opt_set EXTRUDERS 2
|
|
||||||
# opt_set NUM_SERVOS 1
|
|
||||||
# opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
|
||||||
# exec_test $1 $2 "SWITCHING_EXTRUDER"
|
|
||||||
#
|
|
||||||
# Enable COREXY
|
|
||||||
#
|
|
||||||
restore_configs
|
|
||||||
opt_set MOTHERBOARD BOARD_TEENSY31_32
|
|
||||||
opt_enable COREXY
|
|
||||||
exec_test $1 $2 "COREXY"
|
|
||||||
|
|
||||||
#
|
|
||||||
# Enable COREXZ
|
|
||||||
#
|
|
||||||
restore_configs
|
|
||||||
opt_set MOTHERBOARD BOARD_TEENSY31_32
|
|
||||||
opt_enable COREXZ
|
|
||||||
exec_test $1 $2 "COREXZ"
|
|
||||||
|
|
||||||
#
|
|
||||||
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
|
|
||||||
#
|
|
||||||
restore_configs
|
|
||||||
opt_set MOTHERBOARD BOARD_TEENSY31_32
|
|
||||||
opt_enable Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
|
||||||
pins_set ramps/RAMPS X_MAX_PIN -1
|
|
||||||
opt_add Z2_MAX_PIN 2
|
|
||||||
opt_enable USE_XMAX_PLUG
|
|
||||||
exec_test $1 $2 "Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS"
|
|
||||||
|
|
||||||
# Clean up
|
|
||||||
restore_configs
|
|
||||||
|
Loading…
Reference in New Issue
Block a user