diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h index 2b6595cd7..4889e4d3c 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h @@ -36,11 +36,10 @@ * Limit Switches */ #if X_STALL_SENSITIVITY + #define X_STOP_PIN X_DIAG_PIN #if X_HOME_DIR < 0 - #define X_MIN_PIN X_DIAG_PIN #define X_MAX_PIN P1_28 // X+ #else - #define X_MAX_PIN X_DIAG_PIN #define X_MIN_PIN P1_28 // X+ #endif #else @@ -49,11 +48,10 @@ #endif #if Y_STALL_SENSITIVITY + #define Y_STOP_PIN Y_DIAG_PIN #if Y_HOME_DIR < 0 - #define Y_MIN_PIN Y_DIAG_PIN #define Y_MAX_PIN P1_26 // Y+ #else - #define Y_MAX_PIN Y_DIAG_PIN #define Y_MIN_PIN P1_26 // Y+ #endif #else @@ -62,11 +60,10 @@ #endif #if Z_STALL_SENSITIVITY + #define Z_STOP_PIN Z_DIAG_PIN #if Z_HOME_DIR < 0 - #define Z_MIN_PIN Z_DIAG_PIN #define Z_MAX_PIN P1_24 // Z+ #else - #define Z_MAX_PIN Z_DIAG_PIN #define Z_MIN_PIN P1_24 // Z+ #endif #else @@ -184,9 +181,6 @@ #define E1_SERIAL_TX_PIN P1_04 #define E1_SERIAL_RX_PIN P1_01 - #define Z2_SERIAL_TX_PIN P1_04 - #define Z2_SERIAL_RX_PIN P1_01 - // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 #endif diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h index 90b5edca8..d0dcd5008 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h @@ -50,11 +50,10 @@ // Limit Switches // #if X_STALL_SENSITIVITY + #define X_STOP_PIN X_DIAG_PIN #if X_HOME_DIR < 0 - #define X_MIN_PIN X_DIAG_PIN #define X_MAX_PIN P1_26 // E0DET #else - #define X_MAX_PIN X_DIAG_PIN #define X_MIN_PIN P1_26 // E0DET #endif #else @@ -62,11 +61,10 @@ #endif #if Y_STALL_SENSITIVITY + #define Y_STOP_PIN Y_DIAG_PIN #if Y_HOME_DIR < 0 - #define Y_MIN_PIN Y_DIAG_PIN #define Y_MAX_PIN P1_25 // E1DET #else - #define Y_MAX_PIN Y_DIAG_PIN #define Y_MIN_PIN P1_25 // E1DET #endif #else @@ -74,11 +72,10 @@ #endif #if Z_STALL_SENSITIVITY + #define Z_STOP_PIN Z_DIAG_PIN #if Z_HOME_DIR < 0 - #define Z_MIN_PIN Z_DIAG_PIN #define Z_MAX_PIN P1_24 // PWRDET #else - #define Z_MAX_PIN Z_DIAG_PIN #define Z_MIN_PIN P1_24 // PWRDET #endif #else diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 736dbdace..4df871a50 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -1026,10 +1026,14 @@ #ifdef X_STOP_PIN #if X_HOME_DIR < 0 #define X_MIN_PIN X_STOP_PIN - #define X_MAX_PIN -1 + #ifndef X_MAX_PIN + #define X_MAX_PIN -1 + #endif #else - #define X_MIN_PIN -1 #define X_MAX_PIN X_STOP_PIN + #ifndef X_MIN_PIN + #define X_MIN_PIN -1 + #endif #endif #elif X_HOME_DIR < 0 #define X_STOP_PIN X_MIN_PIN @@ -1040,10 +1044,14 @@ #ifdef Y_STOP_PIN #if Y_HOME_DIR < 0 #define Y_MIN_PIN Y_STOP_PIN - #define Y_MAX_PIN -1 + #ifndef Y_MAX_PIN + #define Y_MAX_PIN -1 + #endif #else - #define Y_MIN_PIN -1 #define Y_MAX_PIN Y_STOP_PIN + #ifndef Y_MIN_PIN + #define Y_MIN_PIN -1 + #endif #endif #elif Y_HOME_DIR < 0 #define Y_STOP_PIN Y_MIN_PIN @@ -1054,10 +1062,14 @@ #ifdef Z_STOP_PIN #if Z_HOME_DIR < 0 #define Z_MIN_PIN Z_STOP_PIN - #define Z_MAX_PIN -1 + #ifndef Z_MAX_PIN + #define Z_MAX_PIN -1 + #endif #else - #define Z_MIN_PIN -1 #define Z_MAX_PIN Z_STOP_PIN + #ifndef Z_MIN_PIN + #define Z_MIN_PIN -1 + #endif #endif #elif Z_HOME_DIR < 0 #define Z_STOP_PIN Z_MIN_PIN @@ -1127,9 +1139,11 @@ * overridden in Configuration.h or Configuration_adv.h. */ +#define __PEXI(p,q) PIN_EXISTS(E##p##_##q) +#define _PEXI(p,q) __PEXI(p,q) #define __EPIN(p,q) E##p##_##q##_PIN #define _EPIN(p,q) __EPIN(p,q) -#define DIAG_REMAPPED(P,Q) (PIN_EXISTS(Q) && (P##_DIAG_PIN == Q##_PIN)) +#define DIAG_REMAPPED(p,q) (PIN_EXISTS(q) && _EPIN(p##_E_INDEX, DIAG) == q##_PIN) // The X2 axis, if any, should be the next open extruder port #define X2_E_INDEX E_STEPPERS @@ -1167,7 +1181,8 @@ // // Auto-assign pins for stallGuard sensorless homing // - #if X2_STALL_SENSITIVITY && ENABLED(X_DUAL_ENDSTOPS) && _EPIN(X2_E_INDEX, DIAG) > 0 + #if X2_STALL_SENSITIVITY && ENABLED(X_DUAL_ENDSTOPS) && _PEXI(X2_E_INDEX, DIAG) + #define X2_DIAG_PIN _EPIN(X2_E_INDEX, DIAG) #if DIAG_REMAPPED(X2, X_MIN) // If already remapped in the pins file... #define X2_USE_ENDSTOP _XMIN_ #elif DIAG_REMAPPED(X2, Y_MIN) @@ -1184,6 +1199,7 @@ #define _X2_USE_ENDSTOP(P) _E##P##_DIAG_ #define X2_USE_ENDSTOP _X2_USE_ENDSTOP(X2_E_INDEX) #endif + #undef X2_DIAG_PIN #endif #define Y2_E_INDEX INCREMENT(X2_E_INDEX) @@ -1234,7 +1250,8 @@ #define Y2_SERIAL_RX_PIN _EPIN(Y2_E_INDEX, SERIAL_RX) #endif #endif - #if Y2_STALL_SENSITIVITY && ENABLED(X_DUAL_ENDSTOPS) && _EPIN(Y2_E_INDEX, DIAG) > 0 + #if Y2_STALL_SENSITIVITY && ENABLED(Y_DUAL_ENDSTOPS) && _PEXI(Y2_E_INDEX, DIAG) + #define Y2_DIAG_PIN _EPIN(Y2_E_INDEX, DIAG) #if DIAG_REMAPPED(Y2, X_MIN) #define Y2_USE_ENDSTOP _XMIN_ #elif DIAG_REMAPPED(Y2, Y_MIN) @@ -1251,6 +1268,7 @@ #define _Y2_USE_ENDSTOP(P) _E##P##_DIAG_ #define Y2_USE_ENDSTOP _Y2_USE_ENDSTOP(Y2_E_INDEX) #endif + #undef Y2_DIAG_PIN #endif #define Z2_E_INDEX INCREMENT(Y2_E_INDEX) #else @@ -1300,7 +1318,8 @@ #define Z2_SERIAL_RX_PIN _EPIN(Z2_E_INDEX, SERIAL_RX) #endif #endif - #if Z2_STALL_SENSITIVITY && ENABLED(X_DUAL_ENDSTOPS) && _EPIN(Z2_E_INDEX, DIAG) > 0 + #if Z2_STALL_SENSITIVITY && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 2 && _PEXI(Z2_E_INDEX, DIAG) + #define Z2_DIAG_PIN _EPIN(Z2_E_INDEX, DIAG) #if DIAG_REMAPPED(Z2, X_MIN) #define Z2_USE_ENDSTOP _XMIN_ #elif DIAG_REMAPPED(Z2, Y_MIN) @@ -1317,6 +1336,7 @@ #define _Z2_USE_ENDSTOP(P) _E##P##_DIAG_ #define Z2_USE_ENDSTOP _Z2_USE_ENDSTOP(Z2_E_INDEX) #endif + #undef Z2_DIAG_PIN #endif #define Z3_E_INDEX INCREMENT(Z2_E_INDEX) #else @@ -1367,7 +1387,8 @@ #define Z3_SERIAL_RX_PIN _EPIN(Z3_E_INDEX, SERIAL_RX) #endif #endif - #if Z3_STALL_SENSITIVITY && ENABLED(X_DUAL_ENDSTOPS) && _EPIN(Z3_E_INDEX, DIAG) > 0 + #if Z3_STALL_SENSITIVITY && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3 && _PEXI(Z3_E_INDEX, DIAG) + #define Z3_DIAG_PIN _EPIN(Z3_E_INDEX, DIAG) #if DIAG_REMAPPED(Z3, X_MIN) #define Z3_USE_ENDSTOP _XMIN_ #elif DIAG_REMAPPED(Z3, Y_MIN) @@ -1382,8 +1403,9 @@ #define Z3_USE_ENDSTOP _ZMAX_ #else #define _Z3_USE_ENDSTOP(P) _E##P##_DIAG_ - #define Z3_USE_ENDSTOP _Y2_USE_ENDSTOP(Y2_E_INDEX) + #define Z3_USE_ENDSTOP _Z3_USE_ENDSTOP(Z3_E_INDEX) #endif + #undef Z3_DIAG_PIN #endif #define Z4_E_INDEX INCREMENT(Z3_E_INDEX) #endif @@ -1432,7 +1454,8 @@ #define Z4_SERIAL_RX_PIN _EPIN(Z4_E_INDEX, SERIAL_RX) #endif #endif - #if Z4_STALL_SENSITIVITY && ENABLED(X_DUAL_ENDSTOPS) && _EPIN(Z4_E_INDEX, DIAG) > 0 + #if Z4_STALL_SENSITIVITY && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 4 && _PEXI(Z4_E_INDEX, DIAG) + #define Z4_DIAG_PIN _EPIN(Z4_E_INDEX, DIAG) #if DIAG_REMAPPED(Z4, X_MIN) #define Z4_USE_ENDSTOP _XMIN_ #elif DIAG_REMAPPED(Z4, Y_MIN) @@ -1449,6 +1472,7 @@ #define _Z4_USE_ENDSTOP(P) _E##P##_DIAG_ #define Z4_USE_ENDSTOP _Z4_USE_ENDSTOP(Z4_E_INDEX) #endif + #undef Z4_DIAG_PIN #endif #endif