Neopixel => NeoPixel

Marlin/Configuration.h

@@ -2062,7 +2062,7 @@
 //#define FYSETC_MINI_12864_X_X    // Type C/D/E/F. No tunable RGB Backlight by default
 //#define FYSETC_MINI_12864_1_2    // Type C/D/E/F. Simple RGB Backlight (always on)
 //#define FYSETC_MINI_12864_2_0    // Type A/B. Discreet RGB Backlight
-//#define FYSETC_MINI_12864_2_1    // Type A/B. Neopixel RGB Backlight
+//#define FYSETC_MINI_12864_2_1    // Type A/B. NeoPixel RGB Backlight
 //#define FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight.
 
 //
@@ -2332,13 +2332,13 @@
  * Adds the M150 command to set the LED (or LED strip) color.
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
  * luminance values can be set from 0 to 255.
- * For Neopixel LED an overall brightness parameter is also available.
+ * For NeoPixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
  *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
- *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
+ *  NOTE: A separate 5V power supply is required! The NeoPixel LED needs
  *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
@@ -2355,7 +2355,7 @@
   //#define RGB_LED_W_PIN -1
 #endif
 
-// Support for Adafruit Neopixel LED driver
+// Support for Adafruit NeoPixel LED driver
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
@@ -2368,7 +2368,7 @@
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
 
-  // Use a single Neopixel LED for static (background) lighting
+  // Use a single NeoPixel LED for static (background) lighting
   //#define NEOPIXEL_BKGD_LED_INDEX  0               // Index of the LED to use
   //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W
 #endif

Marlin/Configuration_adv.h

@@ -488,7 +488,7 @@
   //#define CASE_LIGHT_MAX_PWM 128            // Limit pwm
   //#define CASE_LIGHT_MENU                   // Add Case Light options to the LCD menu
   //#define CASE_LIGHT_NO_BRIGHTNESS          // Disable brightness control. Enable for non-PWM lighting.
-  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use NeoPixel LED as case light, requires NEOPIXEL_LED.
   #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
     #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
   #endif

Marlin/src/feature/leds/neopixel.h

@@ -22,7 +22,7 @@
 #pragma once
 
 /**
- * Neopixel support
+ * NeoPixel support
  */
 
 // ------------------------

Marlin/src/gcode/feature/leds/M150.cpp

@@ -35,7 +35,7 @@
  *                                    If brightness is left out, no value changed
  *
  * With NEOPIXEL_LED:
- *  I<index>  Set the Neopixel index to affect. Default: All
+ *  I<index>  Set the NeoPixel index to affect. Default: All
  *
  * Examples:
  *

Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h

@@ -345,7 +345,7 @@
 #endif
 
 //
-// Neopixel LED
+// NeoPixel LED
 //
 #ifndef NEOPIXEL_PIN
   #define NEOPIXEL_PIN                     P1_24