Finish M900 updates

This commit is contained in:
Scott Lahteine 2020-03-02 16:51:47 -06:00
parent eb4d5120bf
commit 646599d0d9
2 changed files with 67 additions and 64 deletions

View File

@ -47,6 +47,71 @@ void GcodeSuite::M900() {
SERIAL_ECHOPGM(" value out of range");
if (ten) SERIAL_ECHOPGM(" (0-10)");
SERIAL_ECHOLNPGM(".");
};
#if EXTRUDERS < 2
constexpr uint8_t tool_index = 0;
#else
const uint8_t tool_index = parser.intval('T', active_extruder);
if (tool_index >= EXTRUDERS) {
echo_value_oor('T', false);
return;
}
#endif
float &kref = planner.extruder_advance_K[tool_index];
#if ENABLED(EXTRA_LIN_ADVANCE_K)
float &lref = other_extruder_advance_K[tool_index];
#endif
const float oldK = kref;
float newK = oldK;
#if ENABLED(EXTRA_LIN_ADVANCE_K)
const bool old_slot = TEST(lin_adv_slot, tool_index), // The tool's current slot (0 or 1)
new_slot = parser.boolval('S', old_slot); // The passed slot (default = current)
// If a new slot is being selected swap the current and
// saved K values. Do here so K/L will apply correctly.
if (new_slot != old_slot) { // Not the same slot?
SET_BIT_TO(lin_adv_slot, tool_index, new_slot); // Update the slot for the tool
newK = lref; // Get new K value from backup
lref = oldK; // Save K to backup
}
// Set the main K value. Apply if the main slot is active.
if (parser.seenval('K')) {
const float K = parser.value_float();
if (!WITHIN(K, 0, 10)) echo_value_oor('K');
else if (new_slot) lref = K; // S1 Knn
else newK = K; // S0 Knn
}
// Set the extra K value. Apply if the extra slot is active.
if (parser.seenval('L')) {
const float L = parser.value_float();
if (!WITHIN(L, 0, 10)) echo_value_oor('L');
else if (!new_slot) lref = L; // S0 Lnn
else newK = L; // S1 Lnn
}
#else
if (parser.seenval('K')) {
const float K = parser.value_float();
if (WITHIN(K, 0, 10))
newK = K;
else
echo_value_oor('K');
}
#endif
if (newK != oldK) {
planner.synchronize();
kref = newK;
}
if (!parser.seen_any()) {
@ -79,70 +144,8 @@ void GcodeSuite::M900() {
#endif
#endif
return;
}
#if EXTRUDERS < 2
constexpr uint8_t tool_index = 0;
#else
const uint8_t tool_index = parser.intval('T', active_extruder);
if (tool_index >= EXTRUDERS) {
echo_value_oor('T', false);
return;
}
#endif
float &kref = planner.extruder_advance_K[tool_index],
&lref = other_extruder_advance_K[tool_index];
const float oldK = kref, oldOther = lref;
float newK = oldK;
#if ENABLED(EXTRA_LIN_ADVANCE_K)
const bool old_slot = TEST(lin_adv_slot, tool_index), // The tool's current slot (0 or 1)
new_slot = parser.boolval('S', old_slot); // The passed slot (default = current)
// If a new slot is being selected swap the current and
// saved K values. Do here so K/L will apply correctly.
if (new_slot != old_slot) { // Not the same slot?
SET_BIT_TO(lin_adv_slot, tool_index, new_slot); // Update the slot for the tool
newK = oldOther; // Get new K value from backup
lref = oldK; // Save K to backup
}
// Set the main K value. Apply if the main slot is active.
if (parser.seenval('K')) {
const float newK = parser.value_float();
if (!WITHIN(newK, 0, 10)) echo_value_oor('K');
else if (new_slot) lref = newK; // S1 Knn
else newK = newK; // S0 Knn
}
// Set the extra K value. Apply if the extra slot is active.
if (parser.seenval('L')) {
const float newL = parser.value_float();
if (!WITHIN(newL, 0, 10)) echo_value_oor('L');
else if (!new_slot) lref = newL; // S0 Lnn
else newK = newL; // S1 Lnn
}
#else
if (parser.seenval('K')) {
const float newK = parser.value_float();
if (WITHIN(newK, 0, 10))
newK = newK;
else
echo_value_oor('K');
}
#endif
if (newK != oldK) {
planner.synchronize();
kref = newK;
}
}
#endif // LIN_ADVANCE

View File

@ -45,7 +45,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE
BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \
FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE \
SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
exec_test $1 $2 "RAMPS | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..."
@ -66,7 +66,7 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING BOOT_MARLIN_LOGO_SMALL \
SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT SCROLL_LONG_FILENAMES CANCEL_OBJECTS \
EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_USER_MENUS \
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE QUICK_HOME \
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \
LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..."