CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

HAL support for 8s watchdog

Browse Source
This commit is contained in:
Scott Lahteine 2020-11-04 15:08:31 -06:00 committed by Scott Lahteine
parent bbfac75f19
commit 67d58ccb98
14 changed files with 82 additions and 73 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/HAL/DUE/watchdog.cpp
View File

@ -36,7 +36,7 @@ void watchdogSetup() {
#if ENABLED(USE_WATCHDOG)
// 4 seconds timeout
uint32_t timeout = 4000;
uint32_t timeout = TERN(WATCHDOG_DURATION_8S, 8000, 4000);
// Calculate timeout value in WDT counter ticks: This assumes
// the slow clock is running at 32.768 kHz watchdog

2
Marlin/src/HAL/ESP32/watchdog.cpp
View File

@ -25,6 +25,8 @@
#if ENABLED(USE_WATCHDOG)
#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
#include "watchdog.h"
void watchdogSetup() {

2
Marlin/src/HAL/LINUX/watchdog.cpp
View File

@ -27,6 +27,8 @@
#include "watchdog.h"
#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
void watchdog_init() {}
void HAL_watchdog_refresh() {}

2
Marlin/src/HAL/LINUX/watchdog.h
View File

@ -21,7 +21,5 @@
*/
#pragma once
#define WDT_TIMEOUT 4000000 // 4 second timeout
void watchdog_init();
void HAL_watchdog_refresh();

4
Marlin/src/HAL/LPC1768/watchdog.cpp
View File

@ -28,6 +28,8 @@
#include <lpc17xx_wdt.h>
#include "watchdog.h"
#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
void watchdog_init() {
#if ENABLED(WATCHDOG_RESET_MANUAL)
// We enable the watchdog timer, but only for the interrupt.
@ -52,7 +54,7 @@ void watchdog_init() {
#else
WDT_Init(WDT_CLKSRC_IRC, WDT_MODE_RESET);
#endif
WDT_Start(WDT_TIMEOUT);
WDT_Start(WDT_TIMEOUT_US);
}
void HAL_watchdog_refresh() {

2
Marlin/src/HAL/LPC1768/watchdog.h
View File

@ -21,8 +21,6 @@
*/
#pragma once
#define WDT_TIMEOUT 4000000 // 4 second timeout
void watchdog_init();
void HAL_watchdog_refresh();

10
Marlin/src/HAL/SAMD51/watchdog.cpp
View File

@ -24,9 +24,11 @@
#if ENABLED(USE_WATCHDOG)
#include "watchdog.h"
#include "watchdog.h"
void watchdog_init() {
#define WDT_TIMEOUT_REG TERN(WATCHDOG_DURATION_8S, WDT_CONFIG_PER_CYC8192, WDT_CONFIG_PER_CYC4096) // 4 or 8 second timeout
void watchdog_init() {
// The low-power oscillator used by the WDT runs at 32,768 Hz with
// a 1:32 prescale, thus 1024 Hz, though probably not super precise.
@ -39,13 +41,13 @@
SYNC(WDT->SYNCBUSY.bit.ENABLE);
WDT->INTENCLR.reg = WDT_INTENCLR_EW; // Disable early warning interrupt
WDT->CONFIG.reg = WDT_CONFIG_PER_CYC4096; // Set at least 4s period for chip reset
WDT->CONFIG.reg = WDT_TIMEOUT_REG; // Set a 4s or 8s period for chip reset
HAL_watchdog_refresh();
WDT->CTRLA.reg = WDT_CTRLA_ENABLE; // Start watchdog now in normal mode
SYNC(WDT->SYNCBUSY.bit.ENABLE);
}
}
#endif // USE_WATCHDOG

19
Marlin/src/HAL/STM32/watchdog.cpp
View File

@ -25,23 +25,26 @@
#if ENABLED(USE_WATCHDOG)
#include "../../inc/MarlinConfig.h"
#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
#include "watchdog.h"
#include <IWatchdog.h>
#include "../../inc/MarlinConfig.h"
void watchdog_init() {
#include "watchdog.h"
#include <IWatchdog.h>
void watchdog_init() {
#if DISABLED(DISABLE_WATCHDOG_INIT)
IWatchdog.begin(4000000); // 4 sec timeout
IWatchdog.begin(WDT_TIMEOUT_US);
#endif
}
}
void HAL_watchdog_refresh() {
void HAL_watchdog_refresh() {
IWatchdog.reload();
#if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
TOGGLE(LED_PIN); // heartbeat indicator
#endif
}
}
#endif // USE_WATCHDOG
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

7
Marlin/src/HAL/STM32F1/watchdog.cpp
View File

@ -33,6 +33,13 @@
#include <libmaple/iwdg.h>
#include "watchdog.h"
/**
* The watchdog clock is 40Khz. We need a 4 seconds interval, so use a /256 preescaler and
* 625 reload value (counts down to 0)
* use 1250 for 8 seconds
*/
#define STM32F1_WD_RELOAD TERN(WATCHDOG_DURATION_8S, 1250, 625) // 4 or 8 second timeout
void HAL_watchdog_refresh() {
#if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
TOGGLE(LED_PIN); // heartbeat indicator

7
Marlin/src/HAL/STM32F1/watchdog.h
View File

@ -27,13 +27,6 @@
#include <libmaple/iwdg.h>
/**
* The watchdog clock is 40Khz. We need a 4 seconds interval, so use a /256 preescaler and
* 625 reload value (counts down to 0)
* use 1250 for 8 seconds
*/
#define STM32F1_WD_RELOAD 625
// Arduino STM32F1 core now has watchdog support
// Initialize watchdog with a 4 second countdown time

18
Marlin/src/HAL/STM32_F4_F7/watchdog.cpp
View File

@ -25,14 +25,16 @@
#if ENABLED(USE_WATCHDOG)
#include "watchdog.h"
#include "watchdog.h"
IWDG_HandleTypeDef hiwdg;
#define WDT_TIMEOUT_COUNT TERN(WATCHDOG_DURATION_8S, 8192, 4096) // 4 or 8 second timeout
void watchdog_init() {
IWDG_HandleTypeDef hiwdg;
void watchdog_init() {
hiwdg.Instance = IWDG;
hiwdg.Init.Prescaler = IWDG_PRESCALER_32; //32kHz LSI clock and 32x prescalar = 1024Hz IWDG clock
hiwdg.Init.Reload = 4095; //4095 counts = 4 seconds at 1024Hz
hiwdg.Init.Prescaler = IWDG_PRESCALER_32; // 32kHz LSI clock and 32x prescalar = 1024Hz IWDG clock
hiwdg.Init.Reload = WDT_TIMEOUT_COUNT - 1;
if (HAL_IWDG_Init(&hiwdg) != HAL_OK) {
//Error_Handler();
}
@ -41,15 +43,15 @@
TOGGLE(LED_PIN); // heartbeat indicator
#endif
}
}
}
void HAL_watchdog_refresh() {
void HAL_watchdog_refresh() {
/* Refresh IWDG: reload counter */
if (HAL_IWDG_Refresh(&hiwdg) != HAL_OK) {
/* Refresh Error */
//Error_Handler();
}
}
}
#endif // USE_WATCHDOG
#endif // STM32GENERIC && (STM32F4 || STM32F7)

4
Marlin/src/HAL/TEENSY31_32/watchdog.cpp
View File

@ -27,9 +27,11 @@
#include "watchdog.h"
#define WDT_TIMEOUT_MS TERN(WATCHDOG_DURATION_8S, 8000, 4000) // 4 or 8 second timeout
void watchdog_init() {
WDOG_TOVALH = 0;
WDOG_TOVALL = 4000;
WDOG_TOVALL = WDT_TIMEOUT_MS;
WDOG_STCTRLH = WDOG_STCTRLH_WDOGEN;
}

4
Marlin/src/HAL/TEENSY35_36/watchdog.cpp
View File

@ -27,9 +27,11 @@
#include "watchdog.h"
#define WDT_TIMEOUT_MS TERN(WATCHDOG_DURATION_8S, 8000, 4000) // 4 or 8 second timeout
void watchdog_init() {
WDOG_TOVALH = 0;
WDOG_TOVALL = 4000;
WDOG_TOVALL = WDT_TIMEOUT_MS;
WDOG_STCTRLH = WDOG_STCTRLH_WDOGEN;
}

10
Marlin/src/HAL/TEENSY40_41/watchdog.cpp
View File

@ -19,31 +19,27 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __IMXRT1062__
/**
* HAL Watchdog for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A)
*/
#ifdef __IMXRT1062__
#include "../../inc/MarlinConfig.h"
#if ENABLED(USE_WATCHDOG)
#include "watchdog.h"
// 4 seconds timeout
#define WDTO 4 //seconds
#define WDT_TIMEOUT TERN(WATCHDOG_DURATION_8S, 8, 4) // 4 or 8 second timeout
uint8_t timeoutval = (WDTO - 0.5f) / 0.5f;
constexpr uint8_t timeoutval = (WDT_TIMEOUT - 0.5f) / 0.5f;
void watchdog_init() {
CCM_CCGR3 |= CCM_CCGR3_WDOG1(3); // enable WDOG1 clocks
WDOG1_WMCR = 0; // disable power down PDE
WDOG1_WCR |= WDOG_WCR_SRS | WDOG_WCR_WT(timeoutval);
WDOG1_WCR |= WDOG_WCR_WDE | WDOG_WCR_WDT | WDOG_WCR_SRE;
}
void HAL_watchdog_refresh() {