BLTouch v3 / 3DTouch Interoperability & performance (#13814)

This commit is contained in:
InsanityAutomation 2019-05-07 22:25:54 -04:00 committed by Scott Lahteine
parent 40aff7e1f2
commit 6811e2921b
107 changed files with 383 additions and 629 deletions

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -35,15 +35,32 @@ void stop();
#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE) #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
#include "../core/debug_out.h" #include "../core/debug_out.h"
void BLTouch::command(const BLTCommand cmd) { bool BLTouch::command(const BLTCommand cmd, const millis_t &ms) {
//SERIAL_ECHOLNPAIR("BLTouch Command :", cmd); if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("BLTouch Command :", cmd);
MOVE_SERVO(Z_PROBE_SERVO_NR, cmd); MOVE_SERVO(Z_PROBE_SERVO_NR, cmd);
safe_delay(BLTOUCH_DELAY); safe_delay(MAX(ms, BLTOUCH_DELAY)); // BLTOUCH_DELAY is also the *minimum* delay
return triggered();
} }
void BLTouch::init() { void BLTouch::init() {
reset(); // Clear all BLTouch error conditions // This is called by marlin.cpp on initialization
stow(); // SET_5V_MODE (if enabled). OD_MODE is the default on power on.
// This mode will stay active until manual SET_OD_MODE or power cycle
#if ENABLED(BLTOUCH_FORCE_5V_MODE)
_set_5V_mode(); // Set 5V mode if explicitely demanded (V3 upwards)
#endif
clear();
// There really should be no alarm outstanding now, and no triggered condition. But if there is,
// there is no need to worry people here on init right at the start of the printer.
}
void BLTouch::clear() {
_reset(); // RESET or RESET_SW will clear an alarm condition but...
// ...it will not clear a triggered condition in SW mode when the pin is currently up
// ANTClabs <-- CODE ERROR
_stow(); // STOW will pull up the pin and clear any triggered condition unless it fails, don't care
_deploy(); // DEPLOY to test the probe. Could fail, don't care
_stow(); // STOW to be ready for meaningful work. Could fail, don't care
} }
bool BLTouch::triggered() { bool BLTouch::triggered() {
@ -56,41 +73,92 @@ bool BLTouch::triggered() {
); );
} }
bool BLTouch::set_deployed(const bool in_deploy) { bool BLTouch::deploy_proc() {
if (in_deploy && triggered()) { // If BLTouch says it's triggered // Do a DEPLOY
reset(); // try to reset it. if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch DEPLOY requested");
_deploy(); _stow(); // Deploy and stow to clear the "triggered" condition.
safe_delay(1500); // Wait for internal self-test to complete. // Attempt to DEPLOY, wait for DEPLOY_DELAY or ALARM
// (Measured completion time was 0.65 seconds if (_deploy_query_alarm()) {
// after reset, deploy, and stow sequence) // The deploy might have failed or the probe is already triggered (nozzle too low?)
if (triggered()) { // If it still claims to be triggered... if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch ALARM or TRIGGER after DEPLOY, recovering");
SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH);
stop(); // punt! clear(); // Get the probe into start condition
return true;
// Last attempt to DEPLOY
if (_deploy_query_alarm()) {
// The deploy might have failed or the probe is actually triggered (nozzle too low?) again
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch Recovery Failed");
SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH); // Tell the user something is wrong, needs action
stop(); // but it's not too bad, no need to kill, allow restart
return true; // Tell our caller we goofed in case he cares to know
} }
} }
#if ENABLED(BLTOUCH_V3) // Now the probe is ready to issue a 10ms pulse when the pin goes up.
#if EITHER(BLTOUCH_FORCE_5V_MODE, ENDSTOPPULLUPS) \ // The trigger STOW (see motion.cpp for example) will pull up the probes pin as soon as the pulse
|| ALL(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, ENDSTOPPULLUP_ZMIN) \ // is registered.
|| (USES_Z_MIN_PROBE_ENDSTOP && ENABLED(ENDSTOPPULLUP_ZMIN_PROBE))
set_5V_mode(); // Assume 5V DC logic level if endstop pullup resistors are enabled
#elif true || ENABLED(BLTOUCH_FORCE_OPEN_DRAIN_MODE)
set_OD_mode();
#endif
#endif
if (in_deploy) { if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("bltouch.deploy_proc() end");
_deploy();
#if ENABLED(BLTOUCH_V3) return false; // report success to caller
set_SW_mode(); }
#endif
bool BLTouch::stow_proc() {
// Do a STOW
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch STOW requested");
// A STOW will clear a triggered condition in the probe (10ms pulse).
// At the moment that we come in here, we might (pulse) or will (SW mode) see the trigger on the pin.
// So even though we know a STOW will be ignored if an ALARM condition is active, we will STOW.
// Note: If the probe is deployed AND in an ALARM condition, this STOW will not pull up the pin
// and the ALARM condition will still be there. --> ANTClabs should change this behaviour maybe
// Attempt to STOW, wait for STOW_DELAY or ALARM
if (_stow_query_alarm()) {
// The stow might have failed
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch ALARM or TRIGGER after STOW, recovering");
_reset(); // This RESET will then also pull up the pin. If it doesn't
// work and the pin is still down, there will no longer be
// an ALARM condition though.
// But one more STOW will catch that
// Last attempt to STOW
if (_stow_query_alarm()) { // so if there is now STILL an ALARM condition:
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch Recovery Failed");
SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH); // Tell the user something is wrong, needs action
stop(); // but it's not too bad, no need to kill, allow restart
return true; // Tell our caller we goofed in case he cares to know
}
} }
else _stow();
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("bltouch.set_deployed(", in_deploy, ")"); if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("bltouch.stow_proc() end");
return false; return false; // report success to caller
}
bool BLTouch::status_proc() {
/**
* Return a TRUE for "YES, it is DEPLOYED"
* This function will ensure switch state is reset after execution
* This may change pin position in some scenarios, specifically
* if the pin has been triggered but not yet stowed.
*/
if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch STATUS requested");
_set_SW_mode();
const bool tr = triggered(); // If triggered in SW mode, the pin is up, it is STOWED
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("BLTouch is ", (int)tr);
_reset(); // turn off the SW Mode
if (tr) _stow(); else _deploy(); // and reset any triggered signal, restore state
return !tr;
} }
#endif // BLTOUCH #endif // BLTOUCH

View File

@ -26,37 +26,75 @@
// BLTouch commands are sent as servo angles // BLTouch commands are sent as servo angles
typedef unsigned char BLTCommand; typedef unsigned char BLTCommand;
#define BLTOUCH_DEPLOY 10 #define BLTOUCH_DEPLOY 10
#define BLTOUCH_SW_MODE 60 #define BLTOUCH_SW_MODE 60
#define BLTOUCH_STOW 90 #define BLTOUCH_STOW 90
#define BLTOUCH_SELFTEST 120 #define BLTOUCH_SELFTEST 120
#define BLTOUCH_5V_MODE 140 #define BLTOUCH_5V_MODE 140
#define BLTOUCH_OD_MODE 150 #define BLTOUCH_OD_MODE 150
#define BLTOUCH_RESET 160 #define BLTOUCH_RESET 160
/**
* The following commands may require different delays.
*
* ANTClabs recommends 2000ms for 5V/OD commands. However it is
* not common for other commands to immediately follow these,
* and testing has shown that these complete in 500ms reliably.
*
* AntClabs recommends 750ms for Deploy/Stow, otherwise you will
* not catch an alarm state until the following move command.
*/
#ifndef BLTOUCH_SET5V_DELAY
#define BLTOUCH_SET5V_DELAY BLTOUCH_DELAY
#endif
#ifndef BLTOUCH_SETOD_DELAY
#define BLTOUCH_SETOD_DELAY BLTOUCH_DELAY
#endif
#ifndef BLTOUCH_DEPLOY_DELAY
#define BLTOUCH_DEPLOY_DELAY 750
#endif
#ifndef BLTOUCH_STOW_DELAY
#define BLTOUCH_STOW_DELAY 750
#endif
#ifndef BLTOUCH_RESET_DELAY
#define BLTOUCH_RESET_DELAY BLTOUCH_DELAY
#endif
class BLTouch { class BLTouch {
public: public:
static void init(); static bool triggered(); // used by menu_advanced.cpp
static void command(const BLTCommand cmd); static void init(); // used by main.cpp
static bool triggered();
FORCE_INLINE static void reset() { command(BLTOUCH_RESET); } // DEPLOY and STOW are wrapped for error handling - these are used by homing and by probing
FORCE_INLINE static void selftest() { command(BLTOUCH_SELFTEST); } FORCE_INLINE static bool deploy() { return deploy_proc(); }
FORCE_INLINE static bool stow() { return stow_proc(); }
FORCE_INLINE static bool status() { return status_proc(); }
FORCE_INLINE static void set_5V_mode() { command(BLTOUCH_5V_MODE); } // Native BLTouch commands ("Underscore"...), used in lcd menus and internally
FORCE_INLINE static void set_OD_mode() { command(BLTOUCH_OD_MODE); } FORCE_INLINE static void _reset() { command(BLTOUCH_RESET, BLTOUCH_RESET_DELAY); }
FORCE_INLINE static void set_SW_mode() { command(BLTOUCH_SW_MODE); }
FORCE_INLINE static bool deploy() { return set_deployed(true); } FORCE_INLINE static void _selftest() { command(BLTOUCH_SELFTEST, BLTOUCH_DELAY); }
FORCE_INLINE static bool stow() { return set_deployed(false); }
FORCE_INLINE static void _deploy() { command(BLTOUCH_DEPLOY); } FORCE_INLINE static void _set_SW_mode() { command(BLTOUCH_SW_MODE, BLTOUCH_DELAY); }
FORCE_INLINE static void _stow() { command(BLTOUCH_STOW); } FORCE_INLINE static void _set_5V_mode() { command(BLTOUCH_5V_MODE, BLTOUCH_SET5V_DELAY); }
FORCE_INLINE static void _set_OD_mode() { command(BLTOUCH_OD_MODE, BLTOUCH_SETOD_DELAY); }
FORCE_INLINE static void _deploy() { command(BLTOUCH_DEPLOY, BLTOUCH_DEPLOY_DELAY); }
FORCE_INLINE static void _stow() { command(BLTOUCH_STOW, BLTOUCH_STOW_DELAY); }
private: private:
static bool set_deployed(const bool deploy); FORCE_INLINE static bool _deploy_query_alarm() { return command(BLTOUCH_DEPLOY, BLTOUCH_DEPLOY_DELAY); }
FORCE_INLINE static bool _stow_query_alarm() { return command(BLTOUCH_STOW, BLTOUCH_STOW_DELAY); }
static void clear();
static bool command(const BLTCommand cmd, const millis_t &ms);
static bool deploy_proc();
static bool stow_proc();
static bool status_proc();
}; };
// Deploy/stow angles for use by servo.cpp / servo.h
#define BLTOUCH_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW } #define BLTOUCH_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
extern BLTouch bltouch; extern BLTouch bltouch;

View File

@ -112,8 +112,7 @@ void GcodeSuite::G34() {
#endif #endif
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
bltouch.reset(); bltouch.init();
bltouch.stow();
#endif #endif
// Always home with tool 0 active // Always home with tool 0 active

View File

@ -465,9 +465,6 @@
#undef SERVO_DELAY #undef SERVO_DELAY
#define SERVO_DELAY { 50 } #define SERVO_DELAY { 50 }
#endif #endif
#ifndef BLTOUCH_DELAY
#define BLTOUCH_DELAY 375
#endif
// Always disable probe pin inverting for BLTouch // Always disable probe pin inverting for BLTouch
#undef Z_MIN_PROBE_ENDSTOP_INVERTING #undef Z_MIN_PROBE_ENDSTOP_INVERTING

View File

@ -1578,6 +1578,9 @@
#ifndef Z_CLEARANCE_MULTI_PROBE #ifndef Z_CLEARANCE_MULTI_PROBE
#define Z_CLEARANCE_MULTI_PROBE Z_CLEARANCE_BETWEEN_PROBES #define Z_CLEARANCE_MULTI_PROBE Z_CLEARANCE_BETWEEN_PROBES
#endif #endif
#if ENABLED(BLTOUCH) && !defined(BLTOUCH_DELAY)
#define BLTOUCH_DELAY 500
#endif
#endif #endif
#ifndef __SAM3X8E__ //todo: hal: broken hal encapsulation #ifndef __SAM3X8E__ //todo: hal: broken hal encapsulation

View File

@ -210,6 +210,10 @@
#error "UBL_MESH_EDITING is now G26_MESH_VALIDATION. Please update your configuration." #error "UBL_MESH_EDITING is now G26_MESH_VALIDATION. Please update your configuration."
#elif defined(BLTOUCH_HEATERS_OFF) #elif defined(BLTOUCH_HEATERS_OFF)
#error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF. Please update your configuration." #error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF. Please update your configuration."
#elif defined(BLTOUCH_V3)
#error "BLTOUCH_V3 is obsolete. Please update your configuration."
#elif defined(BLTOUCH_FORCE_OPEN_DRAIN_MODE)
#error "BLTOUCH_FORCE_OPEN_DRAIN_MODE is obsolete. Please update your configuration."
#elif defined(BEEPER) #elif defined(BEEPER)
#error "BEEPER is now BEEPER_PIN. Please update your pins definitions." #error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
#elif defined(SDCARDDETECT) #elif defined(SDCARDDETECT)
@ -1018,6 +1022,14 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif #endif
#endif #endif
#if ENABLED(BLTOUCH)
#if BLTOUCH_DELAY < 200
#error "BLTOUCH_DELAY less than 200 is unsafe and is not supported."
#elif DISABLED(BLTOUCH_FORCE_5V_MODE) && NONE(ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN, ENDSTOPPULLUP_ZMIN_PROBE)
#error "BLTOUCH without BLTOUCH_FORCE_5V_MODE requires ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN or ENDSTOPPULLUP_ZMIN_PROBE."
#endif
#endif
#if ENABLED(RACK_AND_PINION_PROBE) && !(defined(Z_PROBE_DEPLOY_X) && defined(Z_PROBE_RETRACT_X)) #if ENABLED(RACK_AND_PINION_PROBE) && !(defined(Z_PROBE_DEPLOY_X) && defined(Z_PROBE_RETRACT_X))
#error "RACK_AND_PINION_PROBE requires Z_PROBE_DEPLOY_X and Z_PROBE_RETRACT_X." #error "RACK_AND_PINION_PROBE requires Z_PROBE_DEPLOY_X and Z_PROBE_RETRACT_X."
#endif #endif

View File

@ -904,7 +904,7 @@
#define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch") #define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch")
#endif #endif
#ifndef MSG_BLTOUCH_SW_MODE #ifndef MSG_BLTOUCH_SW_MODE
#define MSG_BLTOUCH_SW_MODE _UxGT("SW Deploy BLTouch") #define MSG_BLTOUCH_SW_MODE _UxGT("BLTouch SW Mode")
#endif #endif
#ifndef MSG_BLTOUCH_5V_MODE #ifndef MSG_BLTOUCH_5V_MODE
#define MSG_BLTOUCH_5V_MODE _UxGT("BLTouch 5V Mode") #define MSG_BLTOUCH_5V_MODE _UxGT("BLTouch 5V Mode")

View File

@ -174,15 +174,13 @@ static void lcd_factory_settings() {
void menu_bltouch() { void menu_bltouch() {
START_MENU(); START_MENU();
MENU_BACK(MSG_MAIN); MENU_BACK(MSG_MAIN);
MENU_ITEM(function, MSG_BLTOUCH_RESET, bltouch.reset); MENU_ITEM(function, MSG_BLTOUCH_RESET, bltouch._reset);
MENU_ITEM(function, MSG_BLTOUCH_SELFTEST, bltouch.selftest); MENU_ITEM(function, MSG_BLTOUCH_SELFTEST, bltouch._selftest);
MENU_ITEM(function, MSG_BLTOUCH_DEPLOY, bltouch._deploy); MENU_ITEM(function, MSG_BLTOUCH_DEPLOY, bltouch._deploy);
MENU_ITEM(function, MSG_BLTOUCH_STOW, bltouch._stow); MENU_ITEM(function, MSG_BLTOUCH_STOW, bltouch._stow);
#if ENABLED(BLTOUCH_V3) MENU_ITEM(function, MSG_BLTOUCH_SW_MODE, bltouch._set_SW_mode);
MENU_ITEM(function, MSG_BLTOUCH_SW_MODE, bltouch.set_SW_mode); MENU_ITEM(function, MSG_BLTOUCH_5V_MODE, bltouch._set_5V_mode);
MENU_ITEM(function, MSG_BLTOUCH_5V_MODE, bltouch.set_5V_mode); MENU_ITEM(function, MSG_BLTOUCH_OD_MODE, bltouch._set_OD_mode);
MENU_ITEM(function, MSG_BLTOUCH_OD_MODE, bltouch.set_OD_mode);
#endif
END_MENU(); END_MENU();
} }

View File

@ -40,6 +40,10 @@
#include "printcounter.h" // for print_job_timer #include "printcounter.h" // for print_job_timer
#endif #endif
#if ENABLED(BLTOUCH)
#include "../feature/bltouch.h"
#endif
Endstops endstops; Endstops endstops;
// private: // private:
@ -381,6 +385,9 @@ static void print_es_state(const bool is_hit, PGM_P const label=NULL) {
} }
void _O2 Endstops::M119() { void _O2 Endstops::M119() {
#if ENABLED(BLTOUCH)
bltouch._set_SW_mode();
#endif
SERIAL_ECHOLNPGM(MSG_M119_REPORT); SERIAL_ECHOLNPGM(MSG_M119_REPORT);
#define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, PSTR(MSG_##S)) #define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, PSTR(MSG_##S))
#if HAS_X_MIN #if HAS_X_MIN
@ -457,6 +464,10 @@ void _O2 Endstops::M119() {
} }
#endif #endif
#endif #endif
#if ENABLED(BLTOUCH)
bltouch._reset();
if (enabled_globally) bltouch._stow();
#endif
} // Endstops::M119 } // Endstops::M119
// The following routines are called from an ISR context. It could be the temperature ISR, the // The following routines are called from an ISR context. It could be the temperature ISR, the

View File

@ -283,7 +283,7 @@ float zprobe_zoffset; // Initialized by settings.load()
#endif #endif
#if ENABLED(PROBING_STEPPERS_OFF) #if ENABLED(PROBING_STEPPERS_OFF)
disable_e_steppers(); disable_e_steppers();
#if DISABLED(DELTA) #if DISABLED(DELTA, HOME_AFTER_DEACTIVATE)
disable_X(); disable_Y(); disable_X(); disable_Y();
#endif #endif
#endif #endif

View File

@ -16,7 +16,7 @@ exec_test $1 $2 "RAMPS4DUE_EFB with S_CURVE_ACCELERATION, EEPROM_SETTINGS, GCODE
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_RADDS opt_set MOTHERBOARD BOARD_RADDS
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG BLTOUCH AUTO_BED_LEVELING_BILINEAR \ opt_enable USE_XMAX_PLUG USE_YMAX_PLUG BLTOUCH AUTO_BED_LEVELING_BILINEAR \
Z_TRIPLE_STEPPER_DRIVERS Z_TRIPLE_ENDSTOPS Z_STEPPER_AUTO_ALIGN Z_TRIPLE_STEPPER_DRIVERS Z_TRIPLE_ENDSTOPS Z_STEPPER_AUTO_ALIGN ENDSTOPPULLUPS
opt_add Z2_MAX_ENDSTOP_INVERTING false opt_add Z2_MAX_ENDSTOP_INVERTING false
opt_add Z3_MAX_ENDSTOP_INVERTING false opt_add Z3_MAX_ENDSTOP_INVERTING false
pins_set RAMPS X_MAX_PIN -1 pins_set RAMPS X_MAX_PIN -1

View File

@ -273,7 +273,7 @@ exec_test $1 $2 "Full-featured CR-10S config"
# #
# Delta Config (generic) + ABL bilinear + BLTOUCH # Delta Config (generic) + ABL bilinear + BLTOUCH
use_example_configs delta/generic use_example_configs delta/generic
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_V3 opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_FORCE_5V_MODE
exec_test $1 $2 "Delta Config (generic) + ABL bilinear + BLTOUCH" exec_test $1 $2 "Delta Config (generic) + ABL bilinear + BLTOUCH"
# #
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS # Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -834,18 +834,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -848,18 +848,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -839,18 +839,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -875,18 +875,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -841,18 +841,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -838,18 +838,14 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -829,18 +829,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -816,18 +816,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -829,18 +829,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -816,18 +816,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -827,18 +827,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -838,18 +838,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -829,18 +829,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -847,18 +847,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -838,18 +838,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -832,18 +832,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -832,18 +832,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -838,18 +838,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 #define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -837,18 +837,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -810,18 +810,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -810,18 +810,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -820,18 +820,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -834,18 +834,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -911,18 +911,14 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -857,18 +857,14 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif

View File

@ -844,18 +844,14 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -811,18 +811,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -811,18 +811,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -843,18 +843,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,7 +828,7 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -835,18 +835,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -848,18 +848,14 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -848,18 +848,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -832,18 +832,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -840,18 +840,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -848,18 +848,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -848,18 +848,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -827,18 +827,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -832,18 +832,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -832,18 +832,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -829,18 +829,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -836,18 +836,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -868,18 +868,14 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -826,18 +826,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -841,18 +841,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -830,18 +830,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -830,18 +830,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -859,18 +859,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -879,18 +879,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -849,18 +849,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -827,18 +827,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -839,18 +839,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -837,18 +837,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -857,18 +857,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -847,18 +847,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -838,18 +838,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -828,18 +828,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -964,18 +964,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -910,18 +910,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -910,18 +910,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -910,18 +910,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -900,18 +900,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -915,18 +915,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -900,18 +900,14 @@
*/ */
//#define BLTOUCH //#define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
/** /**
* BLTouch V3.0 and newer smart series * BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/ */
//#define BLTOUCH_V3 //#define BLTOUCH_FORCE_5V_MODE
#if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

View File

@ -904,7 +904,7 @@
*/ */
#define BLTOUCH #define BLTOUCH
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed #define BLTOUCH_DELAY 500 // (ms) Enable and increase if needed
#endif #endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)

Some files were not shown because too many files have changed in this diff Show More