Creality3D CR-20 configurations (#14262)

config/examples/Creality/CR-20 Pro/_Statusscreen.h

@@ -0,0 +1,72 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_WIDTH       32
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B00001111,B01111100,B00111000,B01110000,
+  B00010001,B00100010,B01000100,B10001000,
+  B00100000,B00100010,B01000100,B10001000,
+  B00100000,B00111100,B00000100,B10001000,
+  B00100000,B00101000,B00001000,B10001000,
+  B00100000,B00100100,B00010000,B10001000,
+  B00100000,B00100100,B00100000,B10001000,
+  B00010001,B00100010,B01000000,B10001000,
+  B00001110,B01110011,B01111100,B01110000,
+  B00000000,B00000000,B00000000,B00000000,
+  B00000111,B11000000,B00000000,B00000000,
+  B00000010,B00100000,B00000000,B00000000,
+  B00000010,B00100000,B00000000,B00000000,
+  B00000010,B00100110,B11000111,B00000000,
+  B00000011,B11000011,B00001000,B10000000,
+  B00000010,B00000010,B00001000,B10000000,
+  B00000010,B00000010,B00001000,B10000000,
+  B00000010,B00000010,B00001000,B10000000,
+  B00000111,B00000111,B10000111,B00000000
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#define STATUS_HEATERS_XSPACE   20
+#if HOTENDS < 2
+  #define STATUS_HEATERS_X      48
+  #define STATUS_BED_X          72
+#else
+  #define STATUS_HEATERS_X      40
+  #define STATUS_BED_X          80
+#endif

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -1795,7 +1795,7 @@
    * Define you own with
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers for error conditions,

config/examples/Creality/Ender-5/Configuration_adv.h

@@ -1795,7 +1795,7 @@
    * Define you own with
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers for error conditions,

config/examples/Tevo/Tarantula Pro/Configuration_adv.h

@@ -1791,7 +1791,7 @@
    * Define you own with
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers for error conditions,