BigTreeTech SKR E3 DIP (#14638)

This commit is contained in:
Msq001 2019-07-18 18:43:49 +08:00 committed by Scott Lahteine
parent d472934a70
commit 6920b7fe91
4 changed files with 191 additions and 5 deletions

View File

@ -261,10 +261,11 @@
#define BOARD_MKS_ROBIN_NANO 4007 // MKS Robin Nano (STM32F103VET6)
#define BOARD_BIGTREE_SKR_MINI_V1_1 4008 // BigTreeTech SKR Mini v1.1 (STM32F103RC)
#define BOARD_BIGTREE_SKR_MINI_E3 4009 // BigTreeTech SKR Mini E3 (STM32F103RC)
#define BOARD_JGAURORA_A5S_A1 4010 // JGAurora A5S A1 (STM32F103ZET6)
#define BOARD_FYSETC_AIO_II 4011 // FYSETC AIO_II
#define BOARD_FYSETC_CHEETAH 4012 // FYSETC CHEETAH
#define BOARD_LONGER3D_LK 4013 // Alfawise U20/U20+/U30 (Longer3D LK1/2) / STM32F103VET6
#define BOARD_BIGTREE_SKR_E3_DIP 4010 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC)
#define BOARD_JGAURORA_A5S_A1 4011 // JGAurora A5S A1 (STM32F103ZET6)
#define BOARD_FYSETC_AIO_II 4012 // FYSETC AIO_II
#define BOARD_FYSETC_CHEETAH 4013 // FYSETC Cheetah
#define BOARD_LONGER3D_LK 4014 // Alfawise U20/U20+/U30 (Longer3D LK1/2) / STM32F103VET6
//
// ARM Cortex-M4F

View File

@ -444,6 +444,8 @@
#include "stm32/pins_BIGTREE_SKR_MINI_V1_1.h" // STM32F1 env:BIGTREE_SKR_MINI
#elif MB(BIGTREE_SKR_MINI_E3)
#include "stm32/pins_BIGTREE_SKR_MINI_E3.h" // STM32F1 env:BIGTREE_SKR_MINI
#elif MB(BIGTREE_SKR_E3_DIP)
#include "stm32/pins_BIGTREE_SKR_E3_DIP.h" // STM32F1 env:BIGTREE_SKR_MINI
#elif MB(MALYAN_M200)
#include "stm32/pins_MALYAN_M200.h" // STM32F1 env:malyanm200
#elif MB(CHITU3D)

View File

@ -0,0 +1,183 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#ifndef TARGET_STM32F1
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif
#define BOARD_NAME "BIGTREE SKR E3 DIP V1.0"
// Release PB3/PB4 (TMC_SW Pins) from JTAG pins
#define DISABLE_JTAG
// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
//
// Servos
//
#define SERVO0_PIN PA1
//
// Limit Switches
//
#define X_STOP_PIN PC1
#define Y_STOP_PIN PC0
#define Z_STOP_PIN PC15
//
// Z Probe must be this pin
//
#define Z_MIN_PROBE_PIN PC14
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PC2
#endif
//
// Steppers
//
#define X_ENABLE_PIN PC7
#define X_STEP_PIN PC6
#define X_DIR_PIN PB15
#ifndef X_CS_PIN
#define X_CS_PIN PC10
#endif
#define Y_ENABLE_PIN PB14
#define Y_STEP_PIN PB13
#define Y_DIR_PIN PB12
#ifndef Y_CS_PIN
#define Y_CS_PIN PC11
#endif
#define Z_ENABLE_PIN PB11
#define Z_STEP_PIN PB10
#define Z_DIR_PIN PB2
#ifndef Z_CS_PIN
#define Z_CS_PIN PC12
#endif
#define E0_ENABLE_PIN PB1
#define E0_STEP_PIN PB0
#define E0_DIR_PIN PC5
#ifndef E0_CS_PIN
#define E0_CS_PIN PD2
#endif
//
// Software SPI pins for TMC2130 stepper drivers
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PB5
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PB4
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PB3
#endif
#endif
#if HAS_TMC220x
/**
* TMC2208/TMC2209 stepper drivers
*
* Hardware serial communication ports.
* If undefined software serial is used according to the pins below
*/
//#define X_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
//
// Software serial
//
#define X_SERIAL_TX_PIN PC10
#define X_SERIAL_RX_PIN PC10
#define Y_SERIAL_TX_PIN PC11
#define Y_SERIAL_RX_PIN PC11
#define Z_SERIAL_TX_PIN PC12
#define Z_SERIAL_RX_PIN PC12
#define E0_SERIAL_TX_PIN PD2
#define E0_SERIAL_RX_PIN PD2
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PA0 // Analog Input
#define TEMP_BED_PIN PC3 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN PC8 // EXTRUDER
#define HEATER_BED_PIN PC9 // BED
#define FAN_PIN PA8
//
// USB connect control
//
#define USB_CONNECT PC13
#define USB_CONNECT_INVERTING false
#define SD_DETECT_PIN PC4
/**
* _____
* 5V | · · | GND
* (LCD_EN) PB7 | · · | PB8 (LCD_RS)
* (LCD_D4) PB9 | · · | PA10 (BTN_EN2)
* RESET | · · | PA9 (BTN_EN1)
* (BTN_ENC) PB6 | · · | PA15 (BEEPER)
* -----
* EXP1
*/
#if HAS_SPI_LCD
#define BEEPER_PIN PA15
#define BTN_ENC PB6
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS PB8
#define BTN_EN1 PA9
#define BTN_EN2 PA10
#define LCD_PINS_ENABLE PB7
#define LCD_PINS_D4 PB9
#else
#error "Only CR10_STOCKDISPLAY is currently supported on the BIGTREE_SKR_E3_DIP."
#endif
#endif // HAS_SPI_LCD

View File

@ -303,7 +303,7 @@ debug_tool = stlink
upload_protocol = serial
#
# BIGTREE_SKR_MINI
# BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
#
[env:BIGTREE_SKR_MINI]
platform = ststm32