Merge branch 'Development' of github.com:MarlinFirmware/Marlin into LogoLCD
Conflicts: Marlin/dogm_lcd_implementation.h
This commit is contained in:
commit
69dc411ae0
@ -297,7 +297,7 @@
|
|||||||
// using:
|
// using:
|
||||||
//#define MENU_ADDAUTOSTART
|
//#define MENU_ADDAUTOSTART
|
||||||
|
|
||||||
// Show a progress bar on the LCD when printing from SD?
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
//#define LCD_PROGRESS_BAR
|
//#define LCD_PROGRESS_BAR
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
#ifdef LCD_PROGRESS_BAR
|
||||||
@ -309,6 +309,12 @@
|
|||||||
#define PROGRESS_MSG_EXPIRE 0
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
//#define PROGRESS_MSG_ONCE
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#ifdef DOGLCD
|
||||||
|
#warning LCD_PROGRESS_BAR does not apply to graphical displays at this time.
|
||||||
|
#endif
|
||||||
|
#ifdef FILAMENT_LCD_DISPLAY
|
||||||
|
#error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both.
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
|
@ -1281,28 +1281,32 @@ void refresh_cmd_timeout(void)
|
|||||||
feedrate=retract_feedrate*60;
|
feedrate=retract_feedrate*60;
|
||||||
retracted[active_extruder]=true;
|
retracted[active_extruder]=true;
|
||||||
prepare_move();
|
prepare_move();
|
||||||
current_position[Z_AXIS]-=retract_zlift;
|
if(retract_zlift > 0.01) {
|
||||||
|
current_position[Z_AXIS]-=retract_zlift;
|
||||||
#ifdef DELTA
|
#ifdef DELTA
|
||||||
calculate_delta(current_position); // change cartesian kinematic to delta kinematic;
|
calculate_delta(current_position); // change cartesian kinematic to delta kinematic;
|
||||||
plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
|
plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
|
||||||
#else
|
#else
|
||||||
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
||||||
#endif
|
#endif
|
||||||
prepare_move();
|
prepare_move();
|
||||||
|
}
|
||||||
feedrate = oldFeedrate;
|
feedrate = oldFeedrate;
|
||||||
} else if(!retracting && retracted[active_extruder]) {
|
} else if(!retracting && retracted[active_extruder]) {
|
||||||
destination[X_AXIS]=current_position[X_AXIS];
|
destination[X_AXIS]=current_position[X_AXIS];
|
||||||
destination[Y_AXIS]=current_position[Y_AXIS];
|
destination[Y_AXIS]=current_position[Y_AXIS];
|
||||||
destination[Z_AXIS]=current_position[Z_AXIS];
|
destination[Z_AXIS]=current_position[Z_AXIS];
|
||||||
destination[E_AXIS]=current_position[E_AXIS];
|
destination[E_AXIS]=current_position[E_AXIS];
|
||||||
current_position[Z_AXIS]+=retract_zlift;
|
if(retract_zlift > 0.01) {
|
||||||
|
current_position[Z_AXIS]+=retract_zlift;
|
||||||
#ifdef DELTA
|
#ifdef DELTA
|
||||||
calculate_delta(current_position); // change cartesian kinematic to delta kinematic;
|
calculate_delta(current_position); // change cartesian kinematic to delta kinematic;
|
||||||
plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
|
plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
|
||||||
#else
|
#else
|
||||||
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
||||||
#endif
|
#endif
|
||||||
//prepare_move();
|
//prepare_move();
|
||||||
|
}
|
||||||
if (swapretract) {
|
if (swapretract) {
|
||||||
current_position[E_AXIS]-=(retract_length_swap+retract_recover_length_swap)/volumetric_multiplier[active_extruder];
|
current_position[E_AXIS]-=(retract_length_swap+retract_recover_length_swap)/volumetric_multiplier[active_extruder];
|
||||||
} else {
|
} else {
|
||||||
|
@ -1,19 +1,20 @@
|
|||||||
/**
|
/**
|
||||||
*dogm_lcd_implementation.h
|
* dogm_lcd_implementation.h
|
||||||
*
|
*
|
||||||
*Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
|
* Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
|
||||||
*Demonstrator: http://www.reprap.org/wiki/STB_Electronics
|
* Demonstrator: http://www.reprap.org/wiki/STB_Electronics
|
||||||
*License: http://opensource.org/licenses/BSD-3-Clause
|
* License: http://opensource.org/licenses/BSD-3-Clause
|
||||||
*
|
*
|
||||||
*With the use of:
|
* With the use of:
|
||||||
*u8glib by Oliver Kraus
|
* u8glib by Oliver Kraus
|
||||||
*http://code.google.com/p/u8glib/
|
* http://code.google.com/p/u8glib/
|
||||||
*License: http://opensource.org/licenses/BSD-3-Clause
|
* License: http://opensource.org/licenses/BSD-3-Clause
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
#ifndef DOGM_LCD_IMPLEMENTATION_H
|
||||||
|
#define DOGM_LCD_IMPLEMENTATION_H
|
||||||
|
|
||||||
#ifndef ULTRA_LCD_IMPLEMENTATION_DOGM_H
|
#define MARLIN_VERSION "1.0.2"
|
||||||
#define ULTRA_LCD_IMPLEMENTATION_DOGM_H
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
|
* Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
|
||||||
@ -51,12 +52,12 @@
|
|||||||
*/
|
*/
|
||||||
|
|
||||||
// DOGM parameters (size in pixels)
|
// DOGM parameters (size in pixels)
|
||||||
#define DOG_CHAR_WIDTH 6
|
#define DOG_CHAR_WIDTH 6
|
||||||
#define DOG_CHAR_HEIGHT 12
|
#define DOG_CHAR_HEIGHT 12
|
||||||
#define DOG_CHAR_WIDTH_LARGE 9
|
#define DOG_CHAR_WIDTH_LARGE 9
|
||||||
#define DOG_CHAR_HEIGHT_LARGE 18
|
#define DOG_CHAR_HEIGHT_LARGE 18
|
||||||
|
|
||||||
#define START_ROW 0
|
#define START_ROW 0
|
||||||
|
|
||||||
/* Custom characters defined in font font_6x10_marlin.c */
|
/* Custom characters defined in font font_6x10_marlin.c */
|
||||||
#define LCD_STR_DEGREE "\xB0"
|
#define LCD_STR_DEGREE "\xB0"
|
||||||
@ -69,7 +70,7 @@
|
|||||||
#define LCD_STR_BEDTEMP "\xFE"
|
#define LCD_STR_BEDTEMP "\xFE"
|
||||||
#define LCD_STR_THERMOMETER "\xFF"
|
#define LCD_STR_THERMOMETER "\xFF"
|
||||||
|
|
||||||
#define FONT_STATUSMENU u8g_font_6x9
|
#define FONT_STATUSMENU u8g_font_6x9
|
||||||
|
|
||||||
int lcd_contrast;
|
int lcd_contrast;
|
||||||
|
|
||||||
@ -82,7 +83,7 @@ U8GLIB_ST7920_128X64_RRD u8g(0);
|
|||||||
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
|
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
|
||||||
#else
|
#else
|
||||||
// for regular DOGM128 display with HW-SPI
|
// for regular DOGM128 display with HW-SPI
|
||||||
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
|
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
static void lcd_implementation_init()
|
static void lcd_implementation_init()
|
||||||
@ -134,28 +135,12 @@ static void lcd_implementation_init()
|
|||||||
} while(u8g.nextPage());
|
} while(u8g.nextPage());
|
||||||
}
|
}
|
||||||
|
|
||||||
static void lcd_implementation_clear()
|
static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
|
||||||
{
|
|
||||||
// NO NEED TO IMPLEMENT LIKE SO. Picture loop automatically clears the display.
|
|
||||||
//
|
|
||||||
// Check this article: http://arduino.cc/forum/index.php?topic=91395.25;wap2
|
|
||||||
//
|
|
||||||
// u8g.firstPage();
|
|
||||||
// do {
|
|
||||||
// u8g.setColorIndex(0);
|
|
||||||
// u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
|
|
||||||
// u8g.setColorIndex(1);
|
|
||||||
// } while( u8g.nextPage() );
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
|
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
|
||||||
static void lcd_printPGM(const char* str)
|
static void lcd_printPGM(const char* str) {
|
||||||
{
|
char c;
|
||||||
char c;
|
while ((c = pgm_read_byte(str++))) u8g.print(c);
|
||||||
while((c = pgm_read_byte(str++)) != '\0')
|
|
||||||
{
|
|
||||||
u8g.print(c);
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static void _draw_heater_status(int x, int heater) {
|
static void _draw_heater_status(int x, int heater) {
|
||||||
@ -178,49 +163,44 @@ static void _draw_heater_status(int x, int heater) {
|
|||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
static void lcd_implementation_status_screen()
|
static void lcd_implementation_status_screen() {
|
||||||
{
|
|
||||||
|
|
||||||
static unsigned char fan_rot = 0;
|
static unsigned char fan_rot = 0;
|
||||||
|
|
||||||
u8g.setColorIndex(1); // black on white
|
u8g.setColorIndex(1); // black on white
|
||||||
|
|
||||||
|
// Symbols menu graphics, animated fan
|
||||||
|
u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp);
|
||||||
|
|
||||||
// Symbols menu graphics, animated fan
|
#ifdef SDSUPPORT
|
||||||
u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp);
|
// SD Card Symbol
|
||||||
|
u8g.drawBox(42,42,8,7);
|
||||||
|
u8g.drawBox(50,44,2,5);
|
||||||
|
u8g.drawFrame(42,49,10,4);
|
||||||
|
u8g.drawPixel(50,43);
|
||||||
|
|
||||||
|
// Progress bar frame
|
||||||
|
u8g.drawFrame(54,49,73,4);
|
||||||
|
|
||||||
|
// SD Card Progress bar and clock
|
||||||
|
u8g.setFont(FONT_STATUSMENU);
|
||||||
|
|
||||||
#ifdef SDSUPPORT
|
if (IS_SD_PRINTING) {
|
||||||
//SD Card Symbol
|
// Progress bar solid part
|
||||||
u8g.drawBox(42,42,8,7);
|
u8g.drawBox(55, 50, (unsigned int)(71.f * card.percentDone() / 100.f), 2);
|
||||||
u8g.drawBox(50,44,2,5);
|
}
|
||||||
u8g.drawFrame(42,49,10,4);
|
|
||||||
u8g.drawPixel(50,43);
|
u8g.setPrintPos(80,47);
|
||||||
// Progress bar
|
if (starttime != 0) {
|
||||||
u8g.drawFrame(54,49,73,4);
|
uint16_t time = millis()/60000 - starttime/60000;
|
||||||
|
u8g.print(itostr2(time/60));
|
||||||
// SD Card Progress bar and clock
|
u8g.print(':');
|
||||||
u8g.setFont(FONT_STATUSMENU);
|
u8g.print(itostr2(time%60));
|
||||||
|
}
|
||||||
if (IS_SD_PRINTING)
|
|
||||||
{
|
|
||||||
// Progress bar
|
|
||||||
u8g.drawBox(55,50, (unsigned int)( (71 * card.percentDone())/100) ,2);
|
|
||||||
}
|
|
||||||
else {
|
else {
|
||||||
// do nothing
|
lcd_printPGM(PSTR("--:--"));
|
||||||
}
|
}
|
||||||
|
#endif
|
||||||
u8g.setPrintPos(80,47);
|
|
||||||
if(starttime != 0)
|
|
||||||
{
|
|
||||||
uint16_t time = millis()/60000 - starttime/60000;
|
|
||||||
|
|
||||||
u8g.print(itostr2(time/60));
|
|
||||||
u8g.print(':');
|
|
||||||
u8g.print(itostr2(time%60));
|
|
||||||
}else{
|
|
||||||
lcd_printPGM(PSTR("--:--"));
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Extruders
|
// Extruders
|
||||||
_draw_heater_status(6, 0);
|
_draw_heater_status(6, 0);
|
||||||
@ -234,107 +214,101 @@ static void lcd_implementation_status_screen()
|
|||||||
// Heatbed
|
// Heatbed
|
||||||
_draw_heater_status(81, -1);
|
_draw_heater_status(81, -1);
|
||||||
|
|
||||||
// Fan
|
// Fan
|
||||||
u8g.setFont(FONT_STATUSMENU);
|
u8g.setFont(FONT_STATUSMENU);
|
||||||
u8g.setPrintPos(104,27);
|
u8g.setPrintPos(104,27);
|
||||||
#if defined(FAN_PIN) && FAN_PIN > -1
|
#if defined(FAN_PIN) && FAN_PIN > -1
|
||||||
u8g.print(itostr3(int((fanSpeed*100)/256 + 1)));
|
u8g.print(itostr3(int((fanSpeed*100)/256 + 1)));
|
||||||
u8g.print("%");
|
u8g.print("%");
|
||||||
#else
|
#else
|
||||||
u8g.print("---");
|
u8g.print("---");
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
||||||
// X, Y, Z-Coordinates
|
|
||||||
u8g.setFont(FONT_STATUSMENU);
|
|
||||||
u8g.drawBox(0,29,128,10);
|
|
||||||
u8g.setColorIndex(0); // white on black
|
|
||||||
u8g.setPrintPos(2,37);
|
|
||||||
u8g.print("X");
|
|
||||||
u8g.drawPixel(8,33);
|
|
||||||
u8g.drawPixel(8,35);
|
|
||||||
u8g.setPrintPos(10,37);
|
|
||||||
u8g.print(ftostr31ns(current_position[X_AXIS]));
|
|
||||||
u8g.setPrintPos(43,37);
|
|
||||||
lcd_printPGM(PSTR("Y"));
|
|
||||||
u8g.drawPixel(49,33);
|
|
||||||
u8g.drawPixel(49,35);
|
|
||||||
u8g.setPrintPos(51,37);
|
|
||||||
u8g.print(ftostr31ns(current_position[Y_AXIS]));
|
|
||||||
u8g.setPrintPos(83,37);
|
|
||||||
u8g.print("Z");
|
|
||||||
u8g.drawPixel(89,33);
|
|
||||||
u8g.drawPixel(89,35);
|
|
||||||
u8g.setPrintPos(91,37);
|
|
||||||
u8g.print(ftostr31(current_position[Z_AXIS]));
|
|
||||||
u8g.setColorIndex(1); // black on white
|
|
||||||
|
|
||||||
// Feedrate
|
|
||||||
u8g.setFont(u8g_font_6x10_marlin);
|
|
||||||
u8g.setPrintPos(3,49);
|
|
||||||
u8g.print(LCD_STR_FEEDRATE[0]);
|
|
||||||
u8g.setFont(FONT_STATUSMENU);
|
|
||||||
u8g.setPrintPos(12,48);
|
|
||||||
u8g.print(itostr3(feedmultiply));
|
|
||||||
u8g.print('%');
|
|
||||||
|
|
||||||
// Status line
|
// X, Y, Z-Coordinates
|
||||||
u8g.setFont(FONT_STATUSMENU);
|
u8g.setFont(FONT_STATUSMENU);
|
||||||
u8g.setPrintPos(0,61);
|
u8g.drawBox(0,29,128,10);
|
||||||
#ifndef FILAMENT_LCD_DISPLAY
|
u8g.setColorIndex(0); // white on black
|
||||||
u8g.print(lcd_status_message);
|
u8g.setPrintPos(2,37);
|
||||||
#else
|
u8g.print("X");
|
||||||
if(message_millis+5000>millis()){ //Display both Status message line and Filament display on the last line
|
u8g.drawPixel(8,33);
|
||||||
u8g.print(lcd_status_message);
|
u8g.drawPixel(8,35);
|
||||||
}
|
u8g.setPrintPos(10,37);
|
||||||
else
|
u8g.print(ftostr31ns(current_position[X_AXIS]));
|
||||||
{
|
u8g.setPrintPos(43,37);
|
||||||
lcd_printPGM(PSTR("dia:"));
|
lcd_printPGM(PSTR("Y"));
|
||||||
u8g.print(ftostr12ns(filament_width_meas));
|
u8g.drawPixel(49,33);
|
||||||
lcd_printPGM(PSTR(" factor:"));
|
u8g.drawPixel(49,35);
|
||||||
u8g.print(itostr3(extrudemultiply));
|
u8g.setPrintPos(51,37);
|
||||||
u8g.print('%');
|
u8g.print(ftostr31ns(current_position[Y_AXIS]));
|
||||||
}
|
u8g.setPrintPos(83,37);
|
||||||
#endif
|
u8g.print("Z");
|
||||||
|
u8g.drawPixel(89,33);
|
||||||
|
u8g.drawPixel(89,35);
|
||||||
|
u8g.setPrintPos(91,37);
|
||||||
|
u8g.print(ftostr31(current_position[Z_AXIS]));
|
||||||
|
u8g.setColorIndex(1); // black on white
|
||||||
|
|
||||||
|
// Feedrate
|
||||||
|
u8g.setFont(u8g_font_6x10_marlin);
|
||||||
|
u8g.setPrintPos(3,49);
|
||||||
|
u8g.print(LCD_STR_FEEDRATE[0]);
|
||||||
|
u8g.setFont(FONT_STATUSMENU);
|
||||||
|
u8g.setPrintPos(12,48);
|
||||||
|
u8g.print(itostr3(feedmultiply));
|
||||||
|
u8g.print('%');
|
||||||
|
|
||||||
|
// Status line
|
||||||
|
u8g.setFont(FONT_STATUSMENU);
|
||||||
|
u8g.setPrintPos(0,61);
|
||||||
|
#ifndef FILAMENT_LCD_DISPLAY
|
||||||
|
u8g.print(lcd_status_message);
|
||||||
|
#else
|
||||||
|
if (millis() < message_millis + 5000) { //Display both Status message line and Filament display on the last line
|
||||||
|
u8g.print(lcd_status_message);
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
lcd_printPGM(PSTR("dia:"));
|
||||||
|
u8g.print(ftostr12ns(filament_width_meas));
|
||||||
|
lcd_printPGM(PSTR(" factor:"));
|
||||||
|
u8g.print(itostr3(extrudemultiply));
|
||||||
|
u8g.print('%');
|
||||||
|
}
|
||||||
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
|
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) {
|
||||||
{
|
char c;
|
||||||
char c;
|
|
||||||
|
uint8_t n = LCD_WIDTH - 1 - 2;
|
||||||
uint8_t n = LCD_WIDTH - 1 - 2;
|
|
||||||
|
if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] )) {
|
||||||
if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] ))
|
u8g.setColorIndex(1); // black on white
|
||||||
{
|
u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
|
||||||
u8g.setColorIndex(1); // black on white
|
u8g.setColorIndex(0); // following text must be white on black
|
||||||
u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
|
}
|
||||||
u8g.setColorIndex(0); // following text must be white on black
|
else {
|
||||||
} else u8g.setColorIndex(1); // unmarked text is black on white
|
u8g.setColorIndex(1); // unmarked text is black on white
|
||||||
|
}
|
||||||
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
|
|
||||||
u8g.print(pre_char == '>' ? ' ' : pre_char); // Row selector is obsolete
|
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
|
||||||
|
u8g.print(pre_char == '>' ? ' ' : pre_char); // Row selector is obsolete
|
||||||
|
|
||||||
|
while((c = pgm_read_byte(pstr))) {
|
||||||
while( (c = pgm_read_byte(pstr)) != '\0' )
|
u8g.print(c);
|
||||||
{
|
pstr++;
|
||||||
u8g.print(c);
|
n--;
|
||||||
pstr++;
|
}
|
||||||
n--;
|
while(n--) u8g.print(' ');
|
||||||
}
|
|
||||||
while(n--){
|
u8g.print(post_char);
|
||||||
u8g.print(' ');
|
u8g.print(' ');
|
||||||
}
|
u8g.setColorIndex(1); // restore settings to black on white
|
||||||
|
|
||||||
u8g.print(post_char);
|
|
||||||
u8g.print(' ');
|
|
||||||
u8g.setColorIndex(1); // restore settings to black on white
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, const char* data, bool pgm) {
|
static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, const char* data, bool pgm) {
|
||||||
char c;
|
char c;
|
||||||
uint8_t n = LCD_WIDTH - 1 - 2 - (pgm ? strlen_P(data) : strlen(data));
|
uint8_t n = LCD_WIDTH - 1 - 2 - (pgm ? strlen_P(data) : strlen(data));
|
||||||
|
|
||||||
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
|
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
|
||||||
u8g.print(pre_char);
|
u8g.print(pre_char);
|
||||||
|
|
||||||
@ -393,14 +367,13 @@ static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char p
|
|||||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||||
|
|
||||||
void lcd_implementation_drawedit(const char* pstr, char* value)
|
void lcd_implementation_drawedit(const char* pstr, char* value) {
|
||||||
{
|
u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
|
||||||
u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
|
u8g.setFont(u8g_font_9x18);
|
||||||
u8g.setFont(u8g_font_9x18);
|
lcd_printPGM(pstr);
|
||||||
lcd_printPGM(pstr);
|
u8g.print(':');
|
||||||
u8g.print(':');
|
u8g.setPrintPos((14 - strlen(value)) * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
|
||||||
u8g.setPrintPos((14 - strlen(value)) * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
|
u8g.print(value);
|
||||||
u8g.print(value);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, char * const longFilename, bool isDir, bool isSelected) {
|
static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, char * const longFilename, bool isDir, bool isSelected) {
|
||||||
@ -419,7 +392,7 @@ static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, ch
|
|||||||
}
|
}
|
||||||
|
|
||||||
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
|
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
|
||||||
u8g.print(' '); // Indent by 1 char
|
u8g.print(' '); // Indent by 1 char
|
||||||
|
|
||||||
if (isDir) u8g.print(LCD_STR_FOLDER[0]);
|
if (isDir) u8g.print(LCD_STR_FOLDER[0]);
|
||||||
|
|
||||||
@ -447,20 +420,16 @@ static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, ch
|
|||||||
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||||
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||||
|
|
||||||
static void lcd_implementation_quick_feedback()
|
static void lcd_implementation_quick_feedback() {
|
||||||
{
|
#if BEEPER > -1
|
||||||
|
|
||||||
#if BEEPER > -1
|
|
||||||
SET_OUTPUT(BEEPER);
|
SET_OUTPUT(BEEPER);
|
||||||
for(int8_t i=0;i<10;i++)
|
for(int8_t i=0; i<10; i++) {
|
||||||
{
|
WRITE(BEEPER,HIGH);
|
||||||
WRITE(BEEPER,HIGH);
|
delay(3);
|
||||||
delay(3);
|
WRITE(BEEPER,LOW);
|
||||||
WRITE(BEEPER,LOW);
|
delay(3);
|
||||||
delay(3);
|
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
#endif//ULTRA_LCD_IMPLEMENTATION_DOGM_H
|
|
||||||
|
|
||||||
|
|
||||||
|
#endif //__DOGM_LCD_IMPLEMENTATION_H
|
||||||
|
@ -195,7 +195,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
|
|||||||
if (feedback) lcd_quick_feedback();
|
if (feedback) lcd_quick_feedback();
|
||||||
|
|
||||||
// For LCD_PROGRESS_BAR re-initialize the custom characters
|
// For LCD_PROGRESS_BAR re-initialize the custom characters
|
||||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
|
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
|
||||||
lcd_set_custom_characters(menu == lcd_status_screen);
|
lcd_set_custom_characters(menu == lcd_status_screen);
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
@ -204,7 +204,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
|
|||||||
/* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */
|
/* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */
|
||||||
static void lcd_status_screen()
|
static void lcd_status_screen()
|
||||||
{
|
{
|
||||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
|
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
|
||||||
uint16_t mil = millis();
|
uint16_t mil = millis();
|
||||||
#ifndef PROGRESS_MSG_ONCE
|
#ifndef PROGRESS_MSG_ONCE
|
||||||
if (mil > progressBarTick + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) {
|
if (mil > progressBarTick + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) {
|
||||||
@ -236,11 +236,12 @@ static void lcd_status_screen()
|
|||||||
lcd_status_update_delay--;
|
lcd_status_update_delay--;
|
||||||
else
|
else
|
||||||
lcdDrawUpdate = 1;
|
lcdDrawUpdate = 1;
|
||||||
if (lcdDrawUpdate)
|
|
||||||
{
|
if (lcdDrawUpdate) {
|
||||||
lcd_implementation_status_screen();
|
lcd_implementation_status_screen();
|
||||||
lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
|
lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
|
||||||
}
|
}
|
||||||
|
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
|
|
||||||
bool current_click = LCD_CLICKED;
|
bool current_click = LCD_CLICKED;
|
||||||
@ -265,7 +266,7 @@ static void lcd_status_screen()
|
|||||||
{
|
{
|
||||||
lcd_goto_menu(lcd_main_menu);
|
lcd_goto_menu(lcd_main_menu);
|
||||||
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
|
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
|
||||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
|
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
|
||||||
currentMenu == lcd_status_screen
|
currentMenu == lcd_status_screen
|
||||||
#endif
|
#endif
|
||||||
);
|
);
|
||||||
@ -1191,7 +1192,7 @@ void lcd_update()
|
|||||||
lcdDrawUpdate = 2;
|
lcdDrawUpdate = 2;
|
||||||
lcd_oldcardstatus = IS_SD_INSERTED;
|
lcd_oldcardstatus = IS_SD_INSERTED;
|
||||||
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
|
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
|
||||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
|
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
|
||||||
currentMenu == lcd_status_screen
|
currentMenu == lcd_status_screen
|
||||||
#endif
|
#endif
|
||||||
);
|
);
|
||||||
@ -1294,7 +1295,7 @@ void lcd_finishstatus() {
|
|||||||
}
|
}
|
||||||
}
|
}
|
||||||
lcd_status_message[LCD_WIDTH] = '\0';
|
lcd_status_message[LCD_WIDTH] = '\0';
|
||||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
|
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
|
||||||
#if PROGRESS_MSG_EXPIRE > 0
|
#if PROGRESS_MSG_EXPIRE > 0
|
||||||
messageTick =
|
messageTick =
|
||||||
#endif
|
#endif
|
||||||
|
@ -49,7 +49,7 @@
|
|||||||
#ifdef FILAMENT_LCD_DISPLAY
|
#ifdef FILAMENT_LCD_DISPLAY
|
||||||
extern unsigned long message_millis;
|
extern unsigned long message_millis;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
void lcd_buzz(long duration,uint16_t freq);
|
void lcd_buzz(long duration,uint16_t freq);
|
||||||
bool lcd_clicked();
|
bool lcd_clicked();
|
||||||
|
|
||||||
|
@ -30,9 +30,9 @@ What bugs are we working on: [Bug Fixing Round 2](https://github.com/MarlinFirmw
|
|||||||
|
|
||||||
## Contact
|
## Contact
|
||||||
|
|
||||||
__IRC:__ #marlin-firmware @freenode
|
__IRC:__ #marlin-firmware @freenode ([WebChat Client](https://webchat.freenode.net/?channels=marlin-firmware), [Archive](http://energymonitor-dk.dns4e.net/marlin-firmware-log/))
|
||||||
|
|
||||||
__Google Hangouts:__ https://plus.google.com/hangouts/_/event/cps5d0ru0iruhl6ebqbk9dpqpa4?authuser=0&hl=da
|
__Mailing List:__ marlin@lists.0l.de ([Subscribe](http://lists.0l.de/mailman/listinfo/marlin), [Archive](http://lists.0l.de/pipermail/marlin/))
|
||||||
|
|
||||||
## Credits
|
## Credits
|
||||||
|
|
||||||
|
Loading…
Reference in New Issue
Block a user