From 6bdebede27061868def31428f54840f3696999e0 Mon Sep 17 00:00:00 2001 From: Edward Patel Date: Wed, 1 Apr 2015 21:32:28 +0200 Subject: [PATCH] Added description in the documentation for the new parts. --- Documentation/MeshBedLeveling.md | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/MeshBedLeveling.md b/Documentation/MeshBedLeveling.md index 21eabb6b0..7981a896c 100644 --- a/Documentation/MeshBedLeveling.md +++ b/Documentation/MeshBedLeveling.md @@ -28,6 +28,10 @@ In `Configuration.h` there are two options that can be enabled. There are also some values that can be set. +The following will set the step distance used when manually turning the display encoder. Default is 0.025 + +`MBL_Z_STEP` + Following four define the area to cover. Default 10mm from max bed size `MESH_MIN_X`
@@ -55,14 +59,14 @@ When selecting this option the printer will first do a homing, and then travel t If the EEPROM has been enable it can be good to issue a `M500` to get these points saved. -Issuing a `G29` will return the state of the mesh leveling. +Issuing a `G29` will return the state of the mesh leveling and report the probed points. Probing the bed with G-codes ---------------------------- Probing the bed by G-codes follows the sequence much like doing it with the display. -`G29` or `G29 S0` will return the state bed leveling. +`G29` or `G29 S0` will return the state of the bed leveling and report the probed points. Where X=1 Y=1 is the top-left value and X=MESH_NUM_X_POINTS Y=MESH_NUM_Y_POINTS is bottom-right value. X per column and Y per row. `G29 S1` will initiate the bed leveling, homing and traveling to the first point to probe. @@ -70,6 +74,8 @@ Then use your preferred Printer controller program, i.e. Printrun, to lower the `G29 S2` will store the point and travel to the next point until last point has been probed. +`G29 S3 Xn Yn Zn.nn` will modify a single probed point. This can be used to tweak a badly probed point. Specify probe point where `Xn` and `Yn`, where `n` in `Xn` is between 1 and `MESH_NUM_X_POINTS`. Likewise for `Yn`. `Zn.nn` is the new Z value in that probed point. + Note ----