Translatable Strings for ubl_G29 (#6990)

This commit is contained in:
Tannoo 2017-06-08 09:09:39 -06:00 committed by Roxy-3D
parent abb6b8ad54
commit 731c8e6372
2 changed files with 44 additions and 11 deletions

View File

@ -156,11 +156,17 @@
#ifndef MSG_LEVEL_BED #ifndef MSG_LEVEL_BED
#define MSG_LEVEL_BED _UxGT("Level bed") #define MSG_LEVEL_BED _UxGT("Level bed")
#endif #endif
#ifndef MSG_EDITING_STOPPED
#define MSG_EDITING_STOPPED _UxGT("Mesh Editing Stopped")
#endif
#ifndef MSG_USER_MENU #ifndef MSG_USER_MENU
#define MSG_USER_MENU _UxGT("Custom Commands") #define MSG_USER_MENU _UxGT("Custom Commands")
#endif #endif
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
#ifndef MSG_UBL_DOING_G29
#define MSG_UBL_DOING_G29 _UxGT("Doing G29 UBL!")
#endif
#ifndef MSG_UBL_UNHOMED #ifndef MSG_UBL_UNHOMED
#define MSG_UBL_UNHOMED _UxGT("Home XYZ first") #define MSG_UBL_UNHOMED _UxGT("Home XYZ first")
#endif #endif
@ -173,6 +179,18 @@
#ifndef MSG_UBL_MANUAL_MESH #ifndef MSG_UBL_MANUAL_MESH
#define MSG_UBL_MANUAL_MESH _UxGT("Manually Build Mesh") #define MSG_UBL_MANUAL_MESH _UxGT("Manually Build Mesh")
#endif #endif
#ifndef MSG_UBL_BC_INSERT
#define MSG_UBL_BC_INSERT _UxGT("Place shim & measure")
#endif
#ifndef MSG_UBL_BC_INSERT2
#define MSG_UBL_BC_INSERT2 _UxGT("Measure")
#endif
#ifndef MSG_UBL_BC_REMOVE
#define MSG_UBL_BC_REMOVE _UxGT("Remove & measure bed")
#endif
#ifndef MSG_UBL_MOVING_TO_NEXT
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next")
#endif
#ifndef MSG_UBL_ACTIVATE_MESH #ifndef MSG_UBL_ACTIVATE_MESH
#define MSG_UBL_ACTIVATE_MESH _UxGT("Activate UBL") #define MSG_UBL_ACTIVATE_MESH _UxGT("Activate UBL")
#endif #endif
@ -194,6 +212,12 @@
#ifndef MSG_UBL_EDIT_CUSTOM_MESH #ifndef MSG_UBL_EDIT_CUSTOM_MESH
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh")
#endif #endif
#ifndef MSG_UBL_FINE_TUNE_MESH
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh")
#endif
#ifndef MSG_UBL_DONE_EDITING_MESH
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh")
#endif
#ifndef MSG_UBL_BUILD_CUSTOM_MESH #ifndef MSG_UBL_BUILD_CUSTOM_MESH
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh") #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh")
#endif #endif
@ -299,6 +323,15 @@
#ifndef MSG_UBL_SAVE_MESH #ifndef MSG_UBL_SAVE_MESH
#define MSG_UBL_SAVE_MESH _UxGT("Save Bed Mesh") #define MSG_UBL_SAVE_MESH _UxGT("Save Bed Mesh")
#endif #endif
#ifndef MSG_UBL_SAVE_ERROR
#define MSG_UBL_SAVE_ERROR _UxGT("save_UBL_active() error")
#endif
#ifndef MSG_UBL_RESTORE_ERROR
#define MSG_UBL_RESTORE_ERROR _UxGT("restore_UBL_active() error")
#endif
#ifndef MSG_UBL_Z_OFFSET_STOPPED
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Stopped")
#endif
#endif // AUTO_BED_LEVELING_UBL #endif // AUTO_BED_LEVELING_UBL
#ifndef MSG_MOVING #ifndef MSG_MOVING

View File

@ -713,7 +713,7 @@
if (ELAPSED(millis(), nxt)) { if (ELAPSED(millis(), nxt)) {
SERIAL_PROTOCOLLNPGM("\nZ-Offset Adjustment Stopped."); SERIAL_PROTOCOLLNPGM("\nZ-Offset Adjustment Stopped.");
do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE); do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE);
LCD_MESSAGEPGM("Z-Offset Stopped"); // TODO: Make translatable string LCD_MESSAGEPGM(MSG_UBL_Z_OFFSET_STOPPED);
restore_ubl_active_state_and_leave(); restore_ubl_active_state_and_leave();
goto LEAVE; goto LEAVE;
} }
@ -971,7 +971,7 @@
stepper.synchronize(); stepper.synchronize();
SERIAL_PROTOCOLPGM("Place shim under nozzle"); SERIAL_PROTOCOLPGM("Place shim under nozzle");
LCD_MESSAGEPGM("Place shim & measure"); // TODO: Make translatable string LCD_MESSAGEPGM(MSG_UBL_BC_INSERT);
lcd_return_to_status(); lcd_return_to_status();
echo_and_take_a_measurement(); echo_and_take_a_measurement();
@ -980,7 +980,7 @@
stepper.synchronize(); stepper.synchronize();
SERIAL_PROTOCOLPGM("Remove shim"); SERIAL_PROTOCOLPGM("Remove shim");
LCD_MESSAGEPGM("Remove & measure bed"); // TODO: Make translatable string LCD_MESSAGEPGM(MSG_UBL_BC_REMOVE);
echo_and_take_a_measurement(); echo_and_take_a_measurement();
const float z2 = measure_point_with_encoder(); const float z2 = measure_point_with_encoder();
@ -1029,7 +1029,7 @@
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES); do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
LCD_MESSAGEPGM("Moving to next"); // TODO: Make translatable string LCD_MESSAGEPGM(MSG_UBL_MOVING_TO_NEXT);
do_blocking_move_to_xy(xProbe, yProbe); do_blocking_move_to_xy(xProbe, yProbe);
do_blocking_move_to_z(z_clearance); do_blocking_move_to_z(z_clearance);
@ -1039,7 +1039,7 @@
if (do_ubl_mesh_map) display_map(g29_map_type); // show user where we're probing if (do_ubl_mesh_map) display_map(g29_map_type); // show user where we're probing
serialprintPGM(parser.seen('B') ? PSTR("Place shim & measure") : PSTR("Measure")); // TODO: Make translatable strings serialprintPGM(parser.seen('B') ? PSTR(MSG_UBL_BC_INSERT) : PSTR(MSG_UBL_BC_INSERT2));
const float z_step = 0.01; // existing behavior: 0.01mm per click, occasionally step const float z_step = 0.01; // existing behavior: 0.01mm per click, occasionally step
//const float z_step = 1.0 / planner.axis_steps_per_mm[Z_AXIS]; // approx one step each click //const float z_step = 1.0 / planner.axis_steps_per_mm[Z_AXIS]; // approx one step each click
@ -1097,7 +1097,7 @@
bool err_flag = false; bool err_flag = false;
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
LCD_MESSAGEPGM("Doing G29 UBL!"); // TODO: Make translatable string LCD_MESSAGEPGM(MSG_UBL_DOING_G29);
lcd_quick_feedback(); lcd_quick_feedback();
#endif #endif
@ -1207,7 +1207,7 @@
SERIAL_ECHOLNPGM("save_ubl_active_state_and_disabled() called multiple times in a row."); SERIAL_ECHOLNPGM("save_ubl_active_state_and_disabled() called multiple times in a row.");
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
LCD_MESSAGEPGM("save_UBL_active() error"); // TODO: Make translatable string LCD_MESSAGEPGM(MSG_UBL_SAVE_ERROR);
lcd_quick_feedback(); lcd_quick_feedback();
#endif #endif
@ -1222,7 +1222,7 @@
SERIAL_ECHOLNPGM("restore_ubl_active_state_and_leave() called too many times."); SERIAL_ECHOLNPGM("restore_ubl_active_state_and_leave() called too many times.");
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
LCD_MESSAGEPGM("restore_UBL_active() error"); // TODO: Make translatable string LCD_MESSAGEPGM(MSG_UBL_RESTORE_ERROR);
lcd_quick_feedback(); lcd_quick_feedback();
#endif #endif
@ -1476,7 +1476,7 @@
memset(not_done, 0xFF, sizeof(not_done)); memset(not_done, 0xFF, sizeof(not_done));
LCD_MESSAGEPGM("Fine Tuning Mesh"); // TODO: Make translatable string LCD_MESSAGEPGM(MSG_UBL_FINE_TUNE_MESH);
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES); do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
do_blocking_move_to_xy(lx, ly); do_blocking_move_to_xy(lx, ly);
@ -1538,7 +1538,7 @@
lcd_return_to_status(); lcd_return_to_status();
//SERIAL_PROTOCOLLNPGM("\nFine Tuning of Mesh Stopped."); //SERIAL_PROTOCOLLNPGM("\nFine Tuning of Mesh Stopped.");
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES); do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
LCD_MESSAGEPGM("Mesh Editing Stopped"); // TODO: Make translatable string LCD_MESSAGEPGM(MSG_EDITING_STOPPED);
while (ubl_lcd_clicked()) idle(); while (ubl_lcd_clicked()) idle();
@ -1565,7 +1565,7 @@
do_blocking_move_to_xy(lx, ly); do_blocking_move_to_xy(lx, ly);
LCD_MESSAGEPGM("Done Editing Mesh"); // TODO: Make translatable string LCD_MESSAGEPGM(MSG_UBL_DONE_EDITING_MESH);
SERIAL_ECHOLNPGM("Done Editing Mesh"); SERIAL_ECHOLNPGM("Done Editing Mesh");
} }
#endif #endif