ST7565
This commit is contained in:
Bob-the-Kuhn
Scott Lahteine
parent
97444391e0
commit
7342d5c07a
@ -39,7 +39,15 @@
|
|||||||
#define LCD_CONTRAST_MIN 60
|
#define LCD_CONTRAST_MIN 60
|
||||||
#define LCD_CONTRAST_MAX 140
|
#define LCD_CONTRAST_MAX 140
|
||||||
|
|
||||||
#elif ENABLED(MAKRPANEL) || ENABLED(MINIPANEL)
|
#elif ENABLED(MAKRPANEL)
|
||||||
|
|
||||||
|
#define DOGLCD
|
||||||
|
#define ULTIPANEL
|
||||||
|
#define NEWPANEL
|
||||||
|
#define DEFAULT_LCD_CONTRAST 17
|
||||||
|
#define U8GLIB_ST7565_64128N
|
||||||
|
|
||||||
|
#elif ENABLED(MINIPANEL)
|
||||||
|
|
||||||
#define DOGLCD
|
#define DOGLCD
|
||||||
#define ULTIPANEL
|
#define ULTIPANEL
|
||||||
@ -76,8 +84,12 @@
|
|||||||
#define LCD_CONTRAST_MIN 75
|
#define LCD_CONTRAST_MIN 75
|
||||||
#define LCD_CONTRAST_MAX 115
|
#define LCD_CONTRAST_MAX 115
|
||||||
#define DEFAULT_LCD_CONTRAST 95
|
#define DEFAULT_LCD_CONTRAST 95
|
||||||
|
#define U8GLIB_ST7565_64128N
|
||||||
#elif ENABLED(VIKI2)
|
#elif ENABLED(VIKI2)
|
||||||
#define DEFAULT_LCD_CONTRAST 40
|
#define LCD_CONTRAST_MIN 0
|
||||||
|
#define LCD_CONTRAST_MAX 255
|
||||||
|
#define DEFAULT_LCD_CONTRAST 140
|
||||||
|
#define U8GLIB_ST7565_64128N
|
||||||
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
||||||
#define LCD_CONTRAST_MIN 90
|
#define LCD_CONTRAST_MIN 90
|
||||||
#define LCD_CONTRAST_MAX 130
|
#define LCD_CONTRAST_MAX 130
|
||||||
|
|||||||
@ -232,6 +232,28 @@
|
|||||||
|
|
||||||
#define BEEPER_PIN 37 // not 5V tolerant
|
#define BEEPER_PIN 37 // not 5V tolerant
|
||||||
|
|
||||||
|
//#define BTN_EN1 31 // J3-2 & AUX-4
|
||||||
|
#define BTN_EN2 33 // J3-4 & AUX-4
|
||||||
|
#define BTN_ENC 35 // J3-3 & AUX-4
|
||||||
|
|
||||||
|
#define SD_DETECT_PIN 49 // not 5V tolerant J3-1 & AUX-3
|
||||||
|
#define KILL_PIN 41 // J5-4 & AUX-4
|
||||||
|
#define LCD_PINS_RS 16 // J3-7 & AUX-4
|
||||||
|
#define LCD_SDSS 16 // J3-7 & AUX-4
|
||||||
|
#define LCD_BACKLIGHT_PIN 16 // J3-7 & AUX-4 - only used on DOGLCD controllers
|
||||||
|
#define LCD_PINS_ENABLE 51 // (MOSI) J3-10 & AUX-3
|
||||||
|
#define LCD_PINS_D4 52 // (SCK) J3-9 & AUX-3
|
||||||
|
|
||||||
|
#define LCD_PINS_D5 59 // J3-8 & AUX-2
|
||||||
|
#define DOGLCD_A0 59 // J3-8 & AUX-2
|
||||||
|
#define LCD_PINS_D6 63 // J5-3 & AUX-2
|
||||||
|
#define DOGLCD_CS 63 // J5-3 & AUX-2
|
||||||
|
#define LCD_PINS_D7 6 // (SERVO1) J5-1 & SERVO connector
|
||||||
|
|
||||||
|
#define LCD_PINS_D5 71 // ENET_MDIO
|
||||||
|
#define LCD_PINS_D6 73 // ENET_RX_ER
|
||||||
|
#define LCD_PINS_D7 75 // ENET_RXD1
|
||||||
|
|
||||||
#if ENABLED(NEWPANEL)
|
#if ENABLED(NEWPANEL)
|
||||||
#if ENABLED(REPRAPWORLD_KEYPAD)
|
#if ENABLED(REPRAPWORLD_KEYPAD)
|
||||||
#define SHIFT_OUT 51 // (MOSI) J3-10 & AUX-3
|
#define SHIFT_OUT 51 // (MOSI) J3-10 & AUX-3
|
||||||
@ -245,7 +267,7 @@
|
|||||||
//#define SHIFT_EN 41 // J5-4 & AUX-4
|
//#define SHIFT_EN 41 // J5-4 & AUX-4
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && ENABLED(SDSUPPORT)
|
#if ENABLED(SDSUPPORT)
|
||||||
#define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM
|
#define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM
|
||||||
// When going up/down directory levels the SD card is
|
// When going up/down directory levels the SD card is
|
||||||
// accessed but the garbage/lines are removed when the
|
// accessed but the garbage/lines are removed when the
|
||||||
@ -263,38 +285,43 @@
|
|||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
||||||
|
// #define LCD_SCREEN_ROT_180
|
||||||
|
|
||||||
|
#define SOFTWARE_SPI // temp to see if it fixes the "not found" error
|
||||||
|
|
||||||
|
#undef BEEPER_PIN
|
||||||
|
#define BEEPER_PIN 37 // may change if cable changes
|
||||||
|
|
||||||
#define BTN_EN1 31 // J3-2 & AUX-4
|
#define BTN_EN1 31 // J3-2 & AUX-4
|
||||||
#define BTN_EN2 33 // J3-4 & AUX-4
|
#define BTN_EN2 33 // J3-4 & AUX-4
|
||||||
#define BTN_ENC 35 // J3-3 & AUX-4
|
#define BTN_ENC 35 // J3-3 & AUX-4
|
||||||
|
|
||||||
#define SD_DETECT_PIN 49 // not 5V tolerant J3-1 & AUX-3
|
#define SD_DETECT_PIN 49 // not 5V tolerant J3-1 & AUX-3
|
||||||
#define KILL_PIN 41 // J5-4 & AUX-4
|
#define KILL_PIN 41 // J5-4 & AUX-4
|
||||||
#define LCD_PINS_RS 16 // J3-7 & AUX-4
|
|
||||||
#define LCD_SDSS 16 // J3-7 & AUX-4
|
|
||||||
#define LCD_BACKLIGHT_PIN 16 // J3-7 & AUX-4 - only used on DOGLCD controllers
|
|
||||||
#define LCD_PINS_ENABLE 51 // (MOSI) J3-10 & AUX-3
|
|
||||||
#define LCD_PINS_D4 52 // (SCK) J3-9 & AUX-3
|
|
||||||
|
|
||||||
#define LCD_PINS_D5 71 // ENET_MDIO
|
#undef DOGLCD_CS
|
||||||
|
#define DOGLCD_CS 16
|
||||||
|
#undef LCD_BACKLIGHT_PIN //16 // J3-7 & AUX-4 - only used on DOGLCD controllers
|
||||||
|
#undef LCD_PINS_ENABLE //51 // (MOSI) J3-10 & AUX-3
|
||||||
|
#undef LCD_PINS_D4 //52 // (SCK) J3-9 & AUX-3
|
||||||
|
|
||||||
|
#undef LCD_PINS_D5 //59 // J3-8 & AUX-2
|
||||||
#define DOGLCD_A0 59 // J3-8 & AUX-2
|
#define DOGLCD_A0 59 // J3-8 & AUX-2
|
||||||
#define LCD_PINS_D6 73 // ENET_RX_ER
|
#undef LCD_PINS_D6 //63 // J5-3 & AUX-2
|
||||||
#define DOGLCD_CS 63 // J5-3 & AUX-2
|
#undef LCD_PINS_D7 //6 // (SERVO1) J5-1 & SERVO connector
|
||||||
#define LCD_PINS_D7 75 // ENET_RXD1
|
#define DOGLCD_SCK SCK_PIN
|
||||||
|
#define DOGLCD_MOSI MOSI_PIN
|
||||||
|
|
||||||
|
#define STAT_LED_BLUE_PIN 63 // may change if cable changes
|
||||||
//#define MISO 50 // system defined J3-10 & AUX-3
|
#define STAT_LED_RED_PIN 6 // may change if cable changes
|
||||||
//#define MOSI 51 // system defined J3-10 & AUX-3
|
#endif
|
||||||
//#define SCK 52 // system defined J3-9 & AUX-3
|
//#define MISO_PIN 50 // system defined J3-10 & AUX-3
|
||||||
|
//#define MOSI_PIN 51 // system defined J3-10 & AUX-3
|
||||||
|
//#define SCK_PIN 52 // system defined J3-9 & AUX-3
|
||||||
//#define SS_PIN 53 // system defined J3-5 & AUX-3 - sometimes called SDSS
|
//#define SS_PIN 53 // system defined J3-5 & AUX-3 - sometimes called SDSS
|
||||||
|
|
||||||
|
|
||||||
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
|
||||||
#define LCD_SCREEN_ROT_180
|
|
||||||
|
|
||||||
#define STAT_LED_RED_PIN 20 // I2C connector
|
|
||||||
#define STAT_LED_BLUE_PIN 21 // I2C connector
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(MINIPANEL)
|
#if ENABLED(MINIPANEL)
|
||||||
// GLCD features
|
// GLCD features
|
||||||
//#define LCD_CONTRAST 190
|
//#define LCD_CONTRAST 190
|
||||||
|
|||||||
@ -44,6 +44,7 @@
|
|||||||
*/
|
*/
|
||||||
#include "ultralcd.h"
|
#include "ultralcd.h"
|
||||||
#include "ultralcd_st7920_u8glib_rrd.h"
|
#include "ultralcd_st7920_u8glib_rrd.h"
|
||||||
|
#include "ultralcd_st7565_u8glib_VIKI.h"
|
||||||
#include "dogm_bitmaps.h"
|
#include "dogm_bitmaps.h"
|
||||||
#include "utility.h"
|
#include "utility.h"
|
||||||
#include "duration_t.h"
|
#include "duration_t.h"
|
||||||
@ -171,10 +172,13 @@
|
|||||||
// Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
|
// Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
|
||||||
//U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
|
//U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
|
||||||
U8GLIB_LM6059_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
|
U8GLIB_LM6059_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
|
||||||
#elif ENABLED(MAKRPANEL) || ENABLED(VIKI2) || ENABLED(miniVIKI)
|
#elif ENABLED(U8GLIB_ST7565_64128N)
|
||||||
// The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller as well
|
// The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller
|
||||||
|
// U8GLIB_ST7565_64128n_2x_VIKI u8g(0); // using SW-SPI DOGLCD_MOSI != -1 && DOGLCD_SCK
|
||||||
|
U8GLIB_ST7565_64128n_2x_VIKI u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // using SW-SPI
|
||||||
//U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
|
//U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
|
||||||
U8GLIB_NHD_C12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
|
//U8GLIB_NHD_C12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes HWSPI
|
||||||
|
|
||||||
#elif ENABLED(U8GLIB_SSD1306)
|
#elif ENABLED(U8GLIB_SSD1306)
|
||||||
// Generic support for SSD1306 OLED I2C LCDs
|
// Generic support for SSD1306 OLED I2C LCDs
|
||||||
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 8 stripes
|
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 8 stripes
|
||||||
|
|||||||
248
Marlin/ultralcd_st7565_u8glib_VIKI.h
Normal file
248
Marlin/ultralcd_st7565_u8glib_VIKI.h
Normal file
@ -0,0 +1,248 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef ULCDST7565_H
|
||||||
|
#define ULCDST7565_H
|
||||||
|
|
||||||
|
#include "Marlin.h"
|
||||||
|
|
||||||
|
#if ENABLED(U8GLIB_ST7565_64128N)
|
||||||
|
|
||||||
|
|
||||||
|
#define ST7565_CLK_PIN DOGLCD_SCK
|
||||||
|
#define ST7565_DAT_PIN DOGLCD_MOSI
|
||||||
|
#define ST7565_CS_PIN DOGLCD_CS
|
||||||
|
#define ST7565_A0_PIN DOGLCD_A0
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#include <U8glib.h>
|
||||||
|
|
||||||
|
#define WIDTH 128
|
||||||
|
#define HEIGHT 64
|
||||||
|
#define PAGE_HEIGHT 8
|
||||||
|
|
||||||
|
//set optimization so ARDUINO optimizes this file
|
||||||
|
#pragma GCC optimize (3)
|
||||||
|
|
||||||
|
// If you want you can define your own set of delays in Configuration.h
|
||||||
|
//#define ST7565_DELAY_1 DELAY_0_NOP
|
||||||
|
//#define ST7565_DELAY_2 DELAY_0_NOP
|
||||||
|
//#define ST7565_DELAY_3 DELAY_0_NOP
|
||||||
|
|
||||||
|
/*
|
||||||
|
#define ST7565_DELAY_1 u8g_10MicroDelay()
|
||||||
|
#define ST7565_DELAY_2 u8g_10MicroDelay()
|
||||||
|
#define ST7565_DELAY_3 u8g_10MicroDelay()
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if F_CPU >= 20000000
|
||||||
|
#define CPU_ST7565_DELAY_1 DELAY_0_NOP
|
||||||
|
#define CPU_ST7565_DELAY_2 DELAY_0_NOP
|
||||||
|
#define CPU_ST7565_DELAY_3 DELAY_1_NOP
|
||||||
|
#elif (MOTHERBOARD == BOARD_3DRAG) || (MOTHERBOARD == BOARD_K8200) || (MOTHERBOARD == BOARD_K8400)
|
||||||
|
#define CPU_ST7565_DELAY_1 DELAY_0_NOP
|
||||||
|
#define CPU_ST7565_DELAY_2 DELAY_3_NOP
|
||||||
|
#define CPU_ST7565_DELAY_3 DELAY_0_NOP
|
||||||
|
#elif (MOTHERBOARD == BOARD_MINIRAMBO)
|
||||||
|
#define CPU_ST7565_DELAY_1 DELAY_0_NOP
|
||||||
|
#define CPU_ST7565_DELAY_2 DELAY_4_NOP
|
||||||
|
#define CPU_ST7565_DELAY_3 DELAY_0_NOP
|
||||||
|
#elif (MOTHERBOARD == BOARD_RAMBO)
|
||||||
|
#define CPU_ST7565_DELAY_1 DELAY_0_NOP
|
||||||
|
#define CPU_ST7565_DELAY_2 DELAY_0_NOP
|
||||||
|
#define CPU_ST7565_DELAY_3 DELAY_0_NOP
|
||||||
|
#elif F_CPU == 16000000
|
||||||
|
#define CPU_ST7565_DELAY_1 DELAY_0_NOP
|
||||||
|
#define CPU_ST7565_DELAY_2 DELAY_0_NOP
|
||||||
|
#define CPU_ST7565_DELAY_3 DELAY_1_NOP
|
||||||
|
#else
|
||||||
|
#error "No valid condition for delays in 'ultralcd_st7565_u8glib_VIKI.h'"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef ST7565_DELAY_1
|
||||||
|
#define ST7565_DELAY_1 CPU_ST7565_DELAY_1
|
||||||
|
#endif
|
||||||
|
#ifndef ST7565_DELAY_2
|
||||||
|
#define ST7565_DELAY_2 CPU_ST7565_DELAY_2
|
||||||
|
#endif
|
||||||
|
#ifndef ST7565_DELAY_3
|
||||||
|
#define ST7565_DELAY_3 CPU_ST7565_DELAY_3
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define ST7565_SND_BIT \
|
||||||
|
WRITE(ST7565_CLK_PIN, LOW); ST7565_DELAY_1; \
|
||||||
|
WRITE(ST7565_DAT_PIN, val & 0x80); ST7565_DELAY_2; \
|
||||||
|
WRITE(ST7565_CLK_PIN, HIGH); ST7565_DELAY_3; \
|
||||||
|
WRITE(ST7565_CLK_PIN, LOW);\
|
||||||
|
val <<= 1
|
||||||
|
|
||||||
|
static void ST7565_SWSPI_SND_8BIT(uint8_t val) {
|
||||||
|
ST7565_SND_BIT; // 1
|
||||||
|
ST7565_SND_BIT; // 2
|
||||||
|
ST7565_SND_BIT; // 3
|
||||||
|
ST7565_SND_BIT; // 4
|
||||||
|
ST7565_SND_BIT; // 5
|
||||||
|
ST7565_SND_BIT; // 6
|
||||||
|
ST7565_SND_BIT; // 7
|
||||||
|
ST7565_SND_BIT; // 8
|
||||||
|
}
|
||||||
|
|
||||||
|
#if defined(DOGM_SPI_DELAY_US) && DOGM_SPI_DELAY_US > 0
|
||||||
|
#define U8G_DELAY delayMicroseconds(DOGM_SPI_DELAY_US)
|
||||||
|
#else
|
||||||
|
#define U8G_DELAY u8g_10MicroDelay()
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define ST7565_CS() { WRITE(ST7565_CS_PIN,1); U8G_DELAY; }
|
||||||
|
#define ST7565_NCS() { WRITE(ST7565_CS_PIN,0); }
|
||||||
|
#define ST7565_A0() { WRITE(ST7565_A0_PIN,1); U8G_DELAY; }
|
||||||
|
#define ST7565_NA0() { WRITE(ST7565_A0_PIN,0); }
|
||||||
|
#define ST7565_WRITE_BYTE(a) { ST7565_SWSPI_SND_8BIT((uint8_t)a); U8G_DELAY; }
|
||||||
|
#define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) {ST7565_SWSPI_SND_8BIT( *ptr++);} DELAY_10US; }
|
||||||
|
|
||||||
|
|
||||||
|
uint8_t u8g_dev_st7565_64128n_2x_VIKI_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
|
||||||
|
switch (msg) {
|
||||||
|
case U8G_DEV_MSG_INIT:
|
||||||
|
{ OUT_WRITE(ST7565_CS_PIN, LOW);
|
||||||
|
OUT_WRITE(ST7565_DAT_PIN, LOW);
|
||||||
|
OUT_WRITE(ST7565_CLK_PIN, LOW);
|
||||||
|
OUT_WRITE(ST7565_A0_PIN, LOW);
|
||||||
|
|
||||||
|
ST7565_CS(); /* disable chip */
|
||||||
|
ST7565_NA0(); /* instruction mode */
|
||||||
|
ST7565_NCS(); /* enable chip */
|
||||||
|
|
||||||
|
|
||||||
|
ST7565_WRITE_BYTE(0x0A2); /* 0x0a2: LCD bias 1/9 (according to Displaytech 64128N datasheet) */
|
||||||
|
ST7565_WRITE_BYTE(0x0A0); /* Normal ADC Select (according to Displaytech 64128N datasheet) */
|
||||||
|
|
||||||
|
ST7565_WRITE_BYTE(0x0c8); /* common output mode: set scan direction normal operation/SHL Select; 0x0c0 --> SHL = 0; normal; 0x0c8 --> SHL = 1 */
|
||||||
|
ST7565_WRITE_BYTE(0x040); /* Display start line for Displaytech 64128N */
|
||||||
|
|
||||||
|
ST7565_WRITE_BYTE(0x028 | 0x04); /* power control: turn on voltage converter */
|
||||||
|
// U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */
|
||||||
|
|
||||||
|
ST7565_WRITE_BYTE(0x028 | 0x06); /* power control: turn on voltage regulator */
|
||||||
|
// U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */
|
||||||
|
|
||||||
|
ST7565_WRITE_BYTE(0x028 | 0x07); /* power control: turn on voltage follower */
|
||||||
|
// U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */
|
||||||
|
|
||||||
|
ST7565_WRITE_BYTE(0x010); /* Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N */
|
||||||
|
|
||||||
|
ST7565_WRITE_BYTE(0x0a6); /* display normal, bit val 0: LCD pixel off. */
|
||||||
|
|
||||||
|
ST7565_WRITE_BYTE(0x081); /* set contrast */
|
||||||
|
ST7565_WRITE_BYTE(0x01e); /* Contrast value. Setting for controlling brightness of Displaytech 64128N */
|
||||||
|
|
||||||
|
|
||||||
|
ST7565_WRITE_BYTE(0x0af); /* display on */
|
||||||
|
|
||||||
|
U8G_ESC_DLY(100); /* delay 100 ms */
|
||||||
|
ST7565_WRITE_BYTE(0x0a5); /* display all points; ST7565 */
|
||||||
|
U8G_ESC_DLY(100); /* delay 100 ms */
|
||||||
|
U8G_ESC_DLY(100); /* delay 100 ms */
|
||||||
|
ST7565_WRITE_BYTE(0x0a4); /* normal display */
|
||||||
|
ST7565_CS(); /* disable chip */
|
||||||
|
} /* end of sequence */
|
||||||
|
break;
|
||||||
|
case U8G_DEV_MSG_STOP:
|
||||||
|
break;
|
||||||
|
case U8G_DEV_MSG_PAGE_NEXT:
|
||||||
|
{ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
|
||||||
|
ST7565_CS(); /* disable chip */
|
||||||
|
ST7565_NA0(); /* instruction mode */
|
||||||
|
ST7565_NCS(); /* enable chip */
|
||||||
|
ST7565_WRITE_BYTE(0x010); /* set upper 4 bit of the col adr to 0x10 */
|
||||||
|
ST7565_WRITE_BYTE(0x000); /* set lower 4 bit of the col adr to 0x00. Changed for DisplayTech 64128N */
|
||||||
|
/* end of sequence */
|
||||||
|
ST7565_WRITE_BYTE(0x0b0 | (2*pb->p.page));; /* select current page (ST7565R) */
|
||||||
|
ST7565_A0(); /* data mode */
|
||||||
|
ST7560_WriteSequence( (uint8_t) pb->width, (uint8_t *)pb->buf);
|
||||||
|
ST7565_CS(); /* disable chip */
|
||||||
|
ST7565_NA0(); /* instruction mode */
|
||||||
|
ST7565_NCS(); /* enable chip */
|
||||||
|
ST7565_WRITE_BYTE(0x010); /* set upper 4 bit of the col adr to 0x10 */
|
||||||
|
ST7565_WRITE_BYTE(0x000); /* set lower 4 bit of the col adr to 0x00. Changed for DisplayTech 64128N */
|
||||||
|
/* end of sequence */
|
||||||
|
ST7565_WRITE_BYTE(0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
|
||||||
|
ST7565_A0(); /* data mode */
|
||||||
|
ST7560_WriteSequence( (uint8_t) pb->width, (uint8_t *)(pb->buf)+pb->width);
|
||||||
|
ST7565_CS(); /* disable chip */
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case U8G_DEV_MSG_CONTRAST:
|
||||||
|
ST7565_NCS();
|
||||||
|
ST7565_NA0(); /* instruction mode */
|
||||||
|
ST7565_WRITE_BYTE(0x081);
|
||||||
|
ST7565_WRITE_BYTE((*(uint8_t *)arg) >> 2);
|
||||||
|
ST7565_CS(); /* disable chip */
|
||||||
|
return 1;
|
||||||
|
case U8G_DEV_MSG_SLEEP_ON:
|
||||||
|
ST7565_NA0(); /* instruction mode */
|
||||||
|
ST7565_NCS(); /* enable chip */
|
||||||
|
ST7565_WRITE_BYTE(0x0ac); /* static indicator off */
|
||||||
|
ST7565_WRITE_BYTE(0x000); /* indicator register set (not sure if this is required) */
|
||||||
|
ST7565_WRITE_BYTE(0x0ae); /* display off */
|
||||||
|
ST7565_WRITE_BYTE(0x0a5); /* all points on */
|
||||||
|
ST7565_CS(); /* disable chip , bugfix 12 nov 2014 */
|
||||||
|
/* end of sequence */
|
||||||
|
return 1;
|
||||||
|
case U8G_DEV_MSG_SLEEP_OFF:
|
||||||
|
ST7565_NA0(); /* instruction mode */
|
||||||
|
ST7565_NCS(); /* enable chip */
|
||||||
|
ST7565_WRITE_BYTE(0x0a4); /* all points off */
|
||||||
|
ST7565_WRITE_BYTE(0x0af); /* display on */
|
||||||
|
U8G_ESC_DLY(50); /* delay 50 ms */
|
||||||
|
ST7565_CS(); /* disable chip , bugfix 12 nov 2014 */
|
||||||
|
/* end of sequence */
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t u8g_dev_st7565_64128n_2x_VIKI_buf[WIDTH*2] U8G_NOCOMMON ;
|
||||||
|
u8g_pb_t u8g_dev_st7565_64128n_2x_VIKI_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_st7565_64128n_2x_VIKI_buf};
|
||||||
|
u8g_dev_t u8g_dev_st7565_64128n_2x_VIKI_sw_spi = { u8g_dev_st7565_64128n_2x_VIKI_fn, &u8g_dev_st7565_64128n_2x_VIKI_pb, &u8g_com_null_fn};
|
||||||
|
|
||||||
|
|
||||||
|
class U8GLIB_ST7565_64128n_2x_VIKI : public U8GLIB {
|
||||||
|
public:
|
||||||
|
U8GLIB_ST7565_64128n_2x_VIKI(uint8_t dummy)
|
||||||
|
: U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi)
|
||||||
|
{ }
|
||||||
|
U8GLIB_ST7565_64128n_2x_VIKI(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
|
||||||
|
: U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi)
|
||||||
|
{ }
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#pragma GCC reset_options
|
||||||
|
|
||||||
|
#endif // U8GLIB_ST7565
|
||||||
|
#endif // ULCDST7565_H
|
||||||
Loading…
Reference in New Issue
Block a user