From 7361fbfe28cb3d739a5a92a6796821811745fcab Mon Sep 17 00:00:00 2001 From: Michael Telatynski <7t3chguy@googlemail.com> Date: Fri, 12 Feb 2021 00:32:31 +0000 Subject: [PATCH] Improve probe preheat behavior (#21033) Co-authored-by: InsanityAutomation Co-authored-by: Scott Lahteine --- Marlin/src/inc/Conditionals_LCD.h | 16 --------- Marlin/src/module/probe.cpp | 59 +++++++++++++++++++++++-------- 2 files changed, 45 insertions(+), 30 deletions(-) diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 712ed39cf..17f427a8d 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -818,22 +818,6 @@ #define TOTAL_PROBING MULTIPLE_PROBING #endif #endif - #if ENABLED(PREHEAT_BEFORE_PROBING) - #ifndef PROBING_NOZZLE_TEMP - #define PROBING_NOZZLE_TEMP 0 - #endif - #ifndef PROBING_BED_TEMP - #define PROBING_BED_TEMP 0 - #endif - #endif - #if ENABLED(PREHEAT_BEFORE_LEVELING) - #ifndef LEVELING_NOZZLE_TEMP - #define LEVELING_NOZZLE_TEMP 0 - #endif - #ifndef LEVELING_BED_TEMP - #define LEVELING_BED_TEMP 0 - #endif - #endif #else // Clear probe pin settings when no probe is selected #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index 925538ef8..8cda039db 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -327,30 +327,61 @@ FORCE_INLINE void probe_specific_action(const bool deploy) { #if EITHER(PREHEAT_BEFORE_PROBING, PREHEAT_BEFORE_LEVELING) + #if ENABLED(PREHEAT_BEFORE_PROBING) + #ifndef PROBING_NOZZLE_TEMP + #define PROBING_NOZZLE_TEMP 0 + #endif + #ifndef PROBING_BED_TEMP + #define PROBING_BED_TEMP 0 + #endif + #endif + #if ENABLED(PREHEAT_BEFORE_LEVELING) + #ifndef LEVELING_NOZZLE_TEMP + #define LEVELING_NOZZLE_TEMP 0 + #endif + #ifndef LEVELING_BED_TEMP + #define LEVELING_BED_TEMP 0 + #endif + #endif + /** - * Do preheating as required before leveling or probing + * Do preheating as required before leveling or probing. + * - If a preheat input is higher than the current target, raise the target temperature. + * - If a preheat input is higher than the current temperature, wait for stabilization. */ void Probe::preheat_for_probing(const uint16_t hotend_temp, const uint16_t bed_temp) { - #if PROBING_NOZZLE_TEMP || LEVELING_NOZZLE_TEMP + #if HAS_HOTEND && (PROBING_NOZZLE_TEMP || LEVELING_NOZZLE_TEMP) #define WAIT_FOR_NOZZLE_HEAT #endif - #if PROBING_BED_TEMP || LEVELING_BED_TEMP + #if HAS_HEATED_BED && (PROBING_BED_TEMP || LEVELING_BED_TEMP) #define WAIT_FOR_BED_HEAT #endif - const uint16_t hotendPreheat = TERN0(WAIT_FOR_NOZZLE_HEAT, thermalManager.degHotend(0) < hotend_temp) ? hotend_temp : 0, - bedPreheat = TERN0(WAIT_FOR_BED_HEAT, thermalManager.degBed() < bed_temp) ? bed_temp : 0; + DEBUG_ECHOPGM("Preheating "); - if (hotendPreheat) { - DEBUG_ECHOPAIR("hotend (", hotendPreheat, ") "); - if (bedPreheat) DEBUG_ECHOPGM("and "); - } - if (bedPreheat) DEBUG_ECHOPAIR("bed (", bedPreheat, ") "); + + #if ENABLED(WAIT_FOR_NOZZLE_HEAT) + const uint16_t hotendPreheat = hotend_temp > thermalManager.degTargetHotend(0) ? hotend_temp : 0; + if (hotendPreheat) { + DEBUG_ECHOPAIR("hotend (", hotendPreheat, ")"); + thermalManager.setTargetHotend(hotendPreheat, 0); + } + #elif ENABLED(WAIT_FOR_BED_HEAT) + constexpr uint16_t hotendPreheat = 0; + #endif + + #if ENABLED(WAIT_FOR_BED_HEAT) + const uint16_t bedPreheat = bed_temp > thermalManager.degTargetBed() ? bed_temp : 0; + if (bedPreheat) { + if (hotendPreheat) DEBUG_ECHOPGM(" and "); + DEBUG_ECHOPAIR("bed (", bedPreheat, ")"); + thermalManager.setTargetBed(bedPreheat); + } + #endif + DEBUG_EOL(); - TERN_(WAIT_FOR_NOZZLE_HEAT, if (hotendPreheat) thermalManager.setTargetHotend(hotendPreheat, 0)); - TERN_(WAIT_FOR_BED_HEAT, if (bedPreheat) thermalManager.setTargetBed(bedPreheat)); - TERN_(WAIT_FOR_NOZZLE_HEAT, if (hotendPreheat) thermalManager.wait_for_hotend(0)); - TERN_(WAIT_FOR_BED_HEAT, if (bedPreheat) thermalManager.wait_for_bed_heating()); + TERN_(WAIT_FOR_NOZZLE_HEAT, if (hotend_temp > thermalManager.degHotend(0) + (TEMP_WINDOW)) thermalManager.wait_for_hotend(0)); + TERN_(WAIT_FOR_BED_HEAT, if (bed_temp > thermalManager.degBed() + (TEMP_BED_WINDOW)) thermalManager.wait_for_bed_heating()); } #endif