Improve STEVAL_3DP001V1 and future STEVAL_* support (#16404)

This commit is contained in:
Bob Kuhn 2020-01-01 20:52:56 -06:00 committed by Scott Lahteine
parent 23bdc1556d
commit 747b2b9bf4
13 changed files with 1803 additions and 192 deletions

View File

@ -303,7 +303,7 @@
#define BOARD_RUMBA32 4203 // RUMBA32 STM32F4-based controller #define BOARD_RUMBA32 4203 // RUMBA32 STM32F4-based controller
#define BOARD_BLACK_STM32F407VE 4204 // BLACK_STM32F407VE #define BOARD_BLACK_STM32F407VE 4204 // BLACK_STM32F407VE
#define BOARD_BLACK_STM32F407ZE 4205 // BLACK_STM32F407ZE #define BOARD_BLACK_STM32F407ZE 4205 // BLACK_STM32F407ZE
#define BOARD_STEVAL 4206 // STEVAL-3DP001V1 3D PRINTER BOARD #define BOARD_STEVAL_3DP001V1 4206 // STEVAL-3DP001V1 3D PRINTER BOARD
#define BOARD_BIGTREE_SKR_PRO_V1_1 4207 // BigTreeTech SKR Pro v1.1 (STM32F407ZG) #define BOARD_BIGTREE_SKR_PRO_V1_1 4207 // BigTreeTech SKR Pro v1.1 (STM32F407ZG)
#define BOARD_BIGTREE_BTT002_V1_0 4208 // BigTreeTech BTT002 v1.0 (STM32F407VE) #define BOARD_BIGTREE_BTT002_V1_0 4208 // BigTreeTech BTT002 v1.0 (STM32F407VE)
#define BOARD_LERDGE_K 4209 // Lerdge K (STM32F407ZG) #define BOARD_LERDGE_K 4209 // Lerdge K (STM32F407ZG)

View File

@ -426,44 +426,6 @@
#error "HOME_USING_SPREADCYCLE is now obsolete. Please remove it from Configuration_adv.h." #error "HOME_USING_SPREADCYCLE is now obsolete. Please remove it from Configuration_adv.h."
#endif #endif
#define BOARD_MKS_13 -1000
#define BOARD_TRIGORILLA -1001
#define BOARD_RURAMPS4D -1002
#define BOARD_FORMBOT_TREX2 -1003
#define BOARD_BIQU_SKR_V1_1 -1004
#define BOARD_STM32F1R -1005
#define BOARD_STM32F103R -1006
#define BOARD_ESP32 -1007
#define BOARD_BIGTREE_SKR_MINI_E3 -1008
#if MB(MKS_13)
#error "BOARD_MKS_13 has been renamed BOARD_MKS_GEN_13. Please update your configuration."
#elif MB(TRIGORILLA)
#error "BOARD_TRIGORILLA has been renamed BOARD_TRIGORILLA_13. Please update your configuration."
#elif MB(RURAMPS4D)
#error "BOARD_RURAMPS4D has been renamed BOARD_RURAMPS4D_11. Please update your configuration."
#elif MB(FORMBOT_TREX2)
#error "FORMBOT_TREX2 has been renamed BOARD_FORMBOT_TREX2PLUS. Please update your configuration."
#elif MB(BIQU_SKR_V1_1)
#error "BOARD_BIQU_SKR_V1_1 has been renamed BOARD_BIGTREE_SKR_V1_1. Please update your configuration."
#elif MB(STM32F1R)
#error "BOARD_STM32F1R has been renamed BOARD_STM32F103RE. Please update your configuration."
#elif MB(STM32F103R)
#error "BOARD_STM32F103R has been renamed BOARD_STM32F103RE. Please update your configuration."
#elif MOTHERBOARD == BOARD_ESP32
#error "BOARD_ESP32 has been renamed BOARD_ESPRESSIF_ESP32. Please update your configuration."
#elif MOTHERBOARD == BOARD_BIGTREE_SKR_MINI_E3
#error "BOARD_BIGTREE_SKR_MINI_E3 has been renamed BOARD_BTT_SKR_MINI_E3_V1_0. Please update your configuration."
#endif
#undef BOARD_MKS_13
#undef BOARD_TRIGORILLA
#undef BOARD_RURAMPS4D
#undef BOARD_FORMBOT_TREX2
#undef BOARD_BIQU_SKR_V1_1
#undef BOARD_STM32F1R
#undef BOARD_STM32F103R
#undef BOARD_ESP32
#undef BOARD_BIGTREE_SKR_MINI_E3
/** /**
* Marlin release, version and default string * Marlin release, version and default string
*/ */

View File

@ -523,8 +523,8 @@
#include "stm32/pins_RUMBA32.h" // STM32F4 env:RUMBA32 #include "stm32/pins_RUMBA32.h" // STM32F4 env:RUMBA32
#elif MB(BLACK_STM32F407VE) #elif MB(BLACK_STM32F407VE)
#include "stm32/pins_BLACK_STM32F407VE.h" // STM32F4 env:STM32F407VE_black #include "stm32/pins_BLACK_STM32F407VE.h" // STM32F4 env:STM32F407VE_black
#elif MB(STEVAL) #elif MB(STEVAL_3DP001V1)
#include "stm32/pins_STEVAL.h" // STM32F4 env:STM32F4 #include "stm32/pins_STEVAL_3DP001V1.h" // STM32F4 env:STM32F401VE_STEVAL
#elif MB(BIGTREE_SKR_PRO_V1_1) #elif MB(BIGTREE_SKR_PRO_V1_1)
#include "stm32/pins_BTT_SKR_PRO_V1_1.h" // STM32F4 env:BIGTREE_SKR_PRO #include "stm32/pins_BTT_SKR_PRO_V1_1.h" // STM32F4 env:BIGTREE_SKR_PRO
#elif MB(BIGTREE_BTT002_V1_0) #elif MB(BIGTREE_BTT002_V1_0)
@ -571,7 +571,57 @@
#include "linux/pins_RAMPS_LINUX.h" // Linux env:linux_native #include "linux/pins_RAMPS_LINUX.h" // Linux env:linux_native
#else #else
#error "Unknown MOTHERBOARD value set in Configuration.h"
//
// Obsolete or unknown board
//
#define BOARD_MKS_13 -1000
#define BOARD_TRIGORILLA -1001
#define BOARD_RURAMPS4D -1002
#define BOARD_FORMBOT_TREX2 -1003
#define BOARD_BIQU_SKR_V1_1 -1004
#define BOARD_STM32F1R -1005
#define BOARD_STM32F103R -1006
#define BOARD_ESP32 -1007
#define BOARD_BIGTREE_SKR_MINI_E3 -1008
#define BOARD_STEVAL -1009
#if MB(MKS_13)
#error "BOARD_MKS_13 has been renamed BOARD_MKS_GEN_13. Please update your configuration."
#elif MB(TRIGORILLA)
#error "BOARD_TRIGORILLA has been renamed BOARD_TRIGORILLA_13. Please update your configuration."
#elif MB(RURAMPS4D)
#error "BOARD_RURAMPS4D has been renamed BOARD_RURAMPS4D_11. Please update your configuration."
#elif MB(FORMBOT_TREX2)
#error "FORMBOT_TREX2 has been renamed BOARD_FORMBOT_TREX2PLUS. Please update your configuration."
#elif MB(BIQU_SKR_V1_1)
#error "BOARD_BIQU_SKR_V1_1 has been renamed BOARD_BIGTREE_SKR_V1_1. Please update your configuration."
#elif MB(STM32F1R)
#error "BOARD_STM32F1R has been renamed BOARD_STM32F103RE. Please update your configuration."
#elif MB(STM32F103R)
#error "BOARD_STM32F103R has been renamed BOARD_STM32F103RE. Please update your configuration."
#elif MOTHERBOARD == BOARD_ESP32
#error "BOARD_ESP32 has been renamed BOARD_ESPRESSIF_ESP32. Please update your configuration."
#elif MB(BIGTREE_SKR_MINI_E3)
#error "BOARD_BIGTREE_SKR_MINI_E3 has been renamed BOARD_BTT_SKR_MINI_E3_V1_0. Please update your configuration."
#elif MB(STEVAL)
#error "BOARD_STEVAL has been renamed BOARD_STEVAL_3DP001V1. Please update your configuration."
#else
#error "Unknown MOTHERBOARD value set in Configuration.h"
#endif
#undef BOARD_MKS_13
#undef BOARD_TRIGORILLA
#undef BOARD_RURAMPS4D
#undef BOARD_FORMBOT_TREX2
#undef BOARD_BIQU_SKR_V1_1
#undef BOARD_STM32F1R
#undef BOARD_STM32F103R
#undef BOARD_ESP32
#undef BOARD_BIGTREE_SKR_MINI_E3
#undef BOARD_STEVAL
#endif #endif
// Define certain undefined pins // Define certain undefined pins

View File

@ -1,150 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#ifndef STM32F4
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#endif
#ifndef MACHINE_NAME
#define MACHINE_NAME "STEVAL-3DP001V1"
#endif
#undef TEMP_TIMER
#define TEMP_TIMER 9 // the Marlin default of timer 7 doesn't exist on the STM32MF401 series
//
// Limit Switches
//
#define X_MIN_PIN 38 // PD8 X_STOP
#define X_MAX_PIN -1
#define Y_MIN_PIN 39 // PD9 Y_STOP
#define Y_MAX_PIN -1
#define Z_MIN_PIN 40 // PD10 Z_STOP
#define Z_MAX_PIN -1
//
// Z Probe (when not Z_MIN_PIN)
//
// #ifndef Z_MIN_PROBE_PIN
// #define Z_MIN_PROBE_PIN 11 // PA4
// #endif
#define SCK_PIN 16 // PB13 SPI_S
#define MISO_PIN 17 // PB14 SPI_M
#define MOSI_PIN 18 // PB15 SPI_M
//
// Steppers
//
#define X_STEP_PIN 60 // PE14 X_PWM
#define X_DIR_PIN 61 // PE15 X_DIR
#define X_ENABLE_PIN 59 // PE13 X_RES
#define X_CS_PIN 11 // PA4 SPI_CS
#define Y_STEP_PIN 62 // PB10 Y_PWM
#define Y_DIR_PIN 63 // PE9 Y_DIR
#define Y_ENABLE_PIN 64 // PE10 Y_RES
#define Y_CS_PIN 11 // PA4 SPI_CS
#define Z_STEP_PIN 66 // PC6 Z_PWM
#define Z_DIR_PIN 67 // PC0 Z_DIR
#define Z_ENABLE_PIN 65 // PC15 Z_RES
#define Z_CS_PIN 11 // PA4 SPI_CS
#define E0_STEP_PIN 70 // PD12 E1_PW
#define E0_DIR_PIN 68 // PC13 E1_DIR
#define E0_ENABLE_PIN 69 // PC14 E1_RE
#define E0_CS_PIN 11 // PA4 SPI_CS
#define E1_STEP_PIN 72 // PE5 E2_PWM
#define E1_DIR_PIN 73 // PE6 E2_DIR
#define E1_ENABLE_PIN 71 // PE4 E2_RESE
#define E1_CS_PIN 11 // PA4 SPI_CS
#define E2_STEP_PIN 76 // PB8 E3_PWM
#define E2_DIR_PIN 74 // PE2 E3_DIR
#define E2_ENABLE_PIN 75 // PE3 E3_RESE
#define E2_CS_PIN 11 // PA4 SPI_CS
//
// Temperature Sensors
//
#define TEMP_0_PIN 52 // PA0 E1_THER
#define TEMP_1_PIN 53 // PA1 E2_THER
#define TEMP_BED_PIN 50 // PC2 BED_THE
//
// Heaters / Fans
//
#define HEATER_0_PIN 52 // PA0 E1_THER
#define HEATER_1_PIN 53 // PA1 E2_THER
#define HEATER_BED_PIN 50 // PC2 BED_THE
#define FAN_PIN 56 // PC4 E1_FAN PWM pin, Part cooling fan
#define FAN1_PIN 57 // PC5 E2_FAN PWM pin, Extruder fan
#define FAN2_PIN 58 // PE8 E3_FAN PWM pin, Controller fan
//
// Misc functions
//
#define SDSS 11 // PA4 SPI_CS
#define LED_PIN -1 // Heart beat
#define PS_ON_PIN -1
#define KILL_PIN -1
#define PWR_LOSS -1 // Power loss / nAC_FAULT
//
// LCD / Controller
//
//#define SD_DETECT_PIN 24 // PA15 SD_CA
//#define BEEPER_PIN 23 // PC9 SDIO_D1
//#define LCD_PINS_RS 63 // PE9 Y_DIR
//#define LCD_PINS_ENABLE 58 // PE8 E3_FAN
//#define LCD_PINS_D4 15 // PB12 SPI_C
//#define LCD_PINS_D5 16 // PB13 SPI_S
//#define LCD_PINS_D6 17 // PB14 SPI_M
//#define LCD_PINS_D7 18 // PB15 SPI_M
//#define BTN_EN1 56 // PC4 E1_FAN
//#define BTN_EN2 57 // PC5 E2_FAN
//#define BTN_ENC 51 // PC3 BED_THE
//
// Filament runout detection
//
//#define FIL_RUNOUT_PIN 55 // PA3 BED_THE
//
// Extension pins
//
//#define EXT0_PIN 48 // PB0 E2_HEAT
//#define EXT1_PIN 49 // PB1 E3_HEAT
//#define EXT2_PIN // PB2
//#define EXT3_PIN 38 // PD8 X_STOP
//#define EXT4_PIN 39 // PD9 Y_STOP
//#define EXT5_PIN 40 // PD10 Z_STOP
//#define EXT6_PIN 41 // PD11
//#define EXT7_PIN 70 // PD12 E1_PW
//#define EXT8_PIN 62 // PB10 Y_PWM
//#define EXT9_PIN // PB11

View File

@ -0,0 +1,349 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// This pin map came from https://github.com/stm32duino/Arduino_Core_STM32/blob/master/variants/ST3DP001_EVAL/variant.cpp
/**
* HOW TO COMPILE
*
* PlatformIO - use the environment STM32F401VE_STEVAL. The AUTO BUILD script will automatically use that environment.
*
* Arduino - this has been tested under 1.8.10
* Install library per https://github.com/stm32duino/Arduino_Core_STM32
* Make the following selections under the TOOL menu in the Arduino IDE
* Board: "3D printer boards"
* Board part number: "STEVAL-3DP001V1"
* U(S)ART support: "Enabled (generic "Serial")"
* USB support (if available): "CDC (no generic "Serial")"
* Optimize: "Smallest (-Os default)"
* C Runtime Library: "newlib Nano (default)"
*/
#pragma once
#ifndef STM32F4
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#endif
#ifndef MACHINE_NAME
#define MACHINE_NAME "STEVAL-3DP001V1"
#endif
#undef TEMP_TIMER
#define TEMP_TIMER 9 // the Marlin default of timer 7 doesn't exist on the STM32MF401 series
//
// Limit Switches
//
#define X_MIN_PIN 39 // PD8 X_STOP
//#define X_MAX_PIN 44 // PD0 W_STOP
#define Y_MIN_PIN 40 // PD9 Y_STOP
//#define Y_MAX_PIN 43 // PA8 V_STOP
#define Z_MIN_PIN 41 // PD10 Z_STOP
//#define Z_MAX_PIN 42 // PD11 U_STOP
//
// Z Probe (when not Z_MIN_PIN)
//
// #ifndef Z_MIN_PROBE_PIN
// #define Z_MIN_PROBE_PIN 16 // PA4
// #endif
#define SCK_PIN 13 // PB13 SPI_S
#define MISO_PIN 12 // PB14 SPI_M
#define MOSI_PIN 11 // PB15 SPI_M
#define L6470_CHAIN_SCK_PIN 17 // PA5
#define L6470_CHAIN_MISO_PIN 18 // PA6
#define L6470_CHAIN_MOSI_PIN 19 // PA7
#define L6470_CHAIN_SS_PIN 16 // PA4
//#define SCK_PIN L6470_CHAIN_SCK_PIN
//#define MISO_PIN L6470_CHAIN_MISO_PIN
//#define MOSI_PIN L6470_CHAIN_MOSI_PIN
//
// Steppers
//
#define X_STEP_PIN 61 // PE14 X_PWM
#define X_DIR_PIN 62 // PE15 X_DIR
#define X_ENABLE_PIN 60 // PE13 X_RES
#define X_CS_PIN 16 // PA4 SPI_CS
#define Y_STEP_PIN 64 // PB10 Y_PWM
#define Y_DIR_PIN 65 // PE9 Y_DIR
#define Y_ENABLE_PIN 63 // PE10 Y_RES
#define Y_CS_PIN 16 // PA4 SPI_CS
#define Z_STEP_PIN 67 // PC6 Z_PWM
#define Z_DIR_PIN 68 // PC0 Z_DIR
#define Z_ENABLE_PIN 66 // PC15 Z_RES
#define Z_CS_PIN 16 // PA4 SPI_CS
#define E0_STEP_PIN 71 // PD12 E1_PW
#define E0_DIR_PIN 70 // PC13 E1_DIR
#define E0_ENABLE_PIN 69 // PC14 E1_RE
#define E0_CS_PIN 16 // PA4 SPI_CS
#define E1_STEP_PIN 73 // PE5 E2_PWM
#define E1_DIR_PIN 74 // PE6 E2_DIR
#define E1_ENABLE_PIN 72 // PE4 E2_RESE
#define E1_CS_PIN 16 // PA4 SPI_CS
#define E2_STEP_PIN 77 // PB8 E3_PWM
#define E2_DIR_PIN 76 // PE2 E3_DIR
#define E2_ENABLE_PIN 75 // PE3 E3_RESE
#define E2_CS_PIN 16 // PA4 SPI_CS
// needed to pass a sanity check
#define X2_CS_PIN 16 // PA4 SPI_CS
#define Y2_CS_PIN 16 // PA4 SPI_CS
#define Z2_CS_PIN 16 // PA4 SPI_CS
#define Z3_CS_PIN 16 // PA4 SPI_CS
#define E3_CS_PIN 16 // PA4 SPI_CS
#define E4_CS_PIN 16 // PA4 SPI_CS
#define E5_CS_PIN 16 // PA4 SPI_CS
/**
* macro to reset/enable L6474 chips
*
* IMPORTANT - to disable (bypass) a L6474, install the corresponding
* resistor (R11 - R17) and change the "V" to zero for the
* corresponding pin.
*/
#define ENABLE_RESET_L64XX_CHIPS(V) do{OUT_WRITE(X_ENABLE_PIN, V);\
OUT_WRITE(Y_ENABLE_PIN, V);\
OUT_WRITE(Z_ENABLE_PIN, V);\
OUT_WRITE(E0_ENABLE_PIN,V);\
OUT_WRITE(E1_ENABLE_PIN,V);\
OUT_WRITE(E2_ENABLE_PIN,V);\
}while(0)
//
// Temperature Sensors
//
#define TEMP_0_PIN 54 // PA0 E1_THERMISTOR
#define TEMP_1_PIN 55 // PA1 E2_THERMISTOR
#define TEMP_2_PIN 56 // PA2 E3_THERMISTOR
#define TEMP_BED_PIN 51 // PC2 BED_THERMISTOR_1
#define TEMP_BED_1_PIN 52 // PC3 BED_THERMISTOR_2
#define TEMP_BED_2_PIN 53 // PA3 BED_THERMISTOR_3
//
// Heaters / Fans
//
#define HEATER_0_PIN 48 // PC7 E1_HEAT_PWM
#define HEATER_1_PIN 49 // PB0 E2_HEAT_PWM
#define HEATER_2_PIN 50 // PB1 E3_HEAT_PWM
#define HEATER_BED_PIN 46 // PD14 BED_HEAT_1 FET
#define HEATER_BED_1_PIN 45 // PD13 BED_HEAT_2 FET
#define HEATER_BED_2_PIN 47 // PD15 BED_HEAT_3 FET
#define FAN_PIN 57 // PC4 E1_FAN PWM pin, Part cooling fan FET
#define FAN1_PIN 58 // PC5 E2_FAN PWM pin, Extruder fan FET
#define ORIG_E0_AUTO_FAN_PIN FAN1_PIN
#define FAN2_PIN 59 // PE8 E3_FAN PWM pin, Controller fan FET
//
// Misc functions
//
#define SDSS 16 // PA4 SPI_CS
#define LED_PIN -1 // 9 // PE1 green LED Heart beat
#define PS_ON_PIN -1
#define KILL_PIN -1
#define PWR_LOSS -1 // Power loss / nAC_FAULT
//
// LCD / Controller
//
//#define SD_DETECT_PIN 66 // PA15 SD_CA
//#define BEEPER_PIN 24 // PC9 SDIO_D1
//#define LCD_PINS_RS 65 // PE9 Y_DIR
//#define LCD_PINS_ENABLE 59 // PE8 E3_FAN
//#define LCD_PINS_D4 10 // PB12 SPI_C
//#define LCD_PINS_D5 13 // PB13 SPI_S
//#define LCD_PINS_D6 12 // PB14 SPI_M
//#define LCD_PINS_D7 11 // PB15 SPI_M
//#define BTN_EN1 57 // PC4 E1_FAN
//#define BTN_EN2 58 // PC5 E2_FAN
//#define BTN_ENC 52 // PC3 BED_THE
//
// Filament runout detection
//
//#define FIL_RUNOUT_PIN 53 // PA3 BED_THE
//
// Extension pins
//
//#define EXT0_PIN 49 // PB0 E2_HEAT
//#define EXT1_PIN 50 // PB1 E3_HEAT
//#define EXT2_PIN // PB2 not used (tied to ground)
//#define EXT3_PIN 39 // PD8 X_STOP
//#define EXT4_PIN 40 // PD9 Y_STOP
//#define EXT5_PIN 41 // PD10 Z_STOP
//#define EXT6_PIN 42 // PD11
//#define EXT7_PIN 71 // PD12 E1_PW
//#define EXT8_PIN 64 // PB10 Y_PWM
// WIFI
// #define 2 // PD3 //CTS
// #define 3 // PD4 //RTS
// #define 4 // PD5 //TX
// #define 5 // PD6 //RX
// #define 6 // PB5 //WIFI_WAKEUP
// #define 7 // PE11 //WIFI_RESET
// #define 8 // PE12 //WIFI_BOOT
// I2C USER
// #define 14 // PB7 //SDA
// #define 15 // PB6 //SCL
// JTAG
// 20 // PA13 //JTAG_TMS/SWDIO
// 21 // PA14 //JTAG_TCK/SWCLK
// 22 // PB3 //JTAG_TDO/SWO
// SDCARD
// #define 23 // PC8 //SDIO_D0
// #define 24 // PC9 //SDIO_D1
// #define 25 // PA15 //SD_CARD_DETECT
// #define 26 // PC10 //SDIO_D2
// #define 27 // PC11 //SDIO_D3
// #define 28 // PC12 //SDIO_CK
// #define 29 // PD2 //SDIO_CMD
// OTG
// #define 30 // PA11 //OTG_DM
// #define 31 // PA12 //OTG_DP
// USER_PINS
// #define 34 // PD7 //USER3
// #define 35 // PB9 //USER1
#define temp_bob_pin 36 // PE0 //USER2
// #define 37 // PB4 //USER4
// USERKET
// #define 38 // PE7 //USER_BUTTON
// #define 0 // PA9 //TX
// #define 1 // PA10 //RX
// IR/PROBE
// #define 32 // PD1 //IR_OUT
// #define 33 // PC1 //IR_ON
/**
* logical pin vs. port/pin cross reference
*
* PA0 54 // E1_THERMISTOR PA9 0 //TX
* PA1 55 // E2_THERMISTOR PA10 1 //RX
* PA2 56 // E3_THERMISTOR PD3 2 // CTS
* PA3 53 // BED_THERMISTOR_3 PD4 3 // RTS
* PA4 16 // SPI_CS PD5 4 // TX
* PA5 17 // SPI_SCK PD6 5 // RX
* PA6 18 // SPI_MISO PB5 6 // WIFI_WAKEUP
* PA7 19 // SPI_MOSI PE11 7 // WIFI_RESET
* PA8 43 // V_STOP PE12 8 // WIFI_BOOT
* PA9 0 //TX PE1 9 // STATUS_LED
* PA10 1 //RX PB12 10 // SPI_CS
* PA11 30 //OTG_DM PB15 11 // SPI_MOSI
* PA12 31 //OTG_DP PB14 12 // SPI_MISO
* PA13 20 // JTAG_TMS/SWDIO PB13 13 // SPI_SCK
* PA14 21 // JTAG_TCK/SWCLK PB7 14 // SDA
* PA15 25 // SD_CARD_DETECT PB6 15 // SCL
* PB0 49 // E2_HEAT_PWM PA4 16 // SPI_CS
* PB1 50 // E3_HEAT_PWM PA5 17 // SPI_SCK
* PB3 22 // JTAG_TDO/SWO PA6 18 // SPI_MISO
* PB4 37 // USER4 PA7 19 // SPI_MOSI
* PB5 6 // WIFI_WAKEUP PA13 20 // JTAG_TMS/SWDIO
* PB6 15 // SCL PA14 21 // JTAG_TCK/SWCLK
* PB7 14 // SDA PB3 22 // JTAG_TDO/SWO
* PB8 77 // E3_PWM PC8 23 // SDIO_D0
* PB9 35 // USER1 PC9 24 // SDIO_D1
* PB10 64 // Y_PWM PA15 25 // SD_CARD_DETECT
* PB12 10 // SPI_CS PC10 26 // SDIO_D2
* PB13 13 // SPI_SCK PC11 27 // SDIO_D3
* PB14 12 // SPI_MISO PC12 28 // SDIO_CK
* PB15 11 // SPI_MOSI PD2 29 // SDIO_CMD
* PC0 68 // Z_DIR PA11 30 //OTG_DM
* PC1 33 //IR_ON PA12 31 //OTG_DP
* PC2 51 // BED_THERMISTOR_1 PD1 32 //IR_OUT
* PC3 52 // BED_THERMISTOR_2 PC1 33 //IR_ON
* PC4 57 // E1_FAN PD7 34 // USER3
* PC5 58 // E2_FAN PB9 35 // USER1
* PC6 67 // Z_PWM PE0 36 // USER2
* PC7 48 // E1_HEAT_PWM PB4 37 // USER4
* PC8 23 // SDIO_D0 PE7 38 // USER_BUTTON
* PC9 24 // SDIO_D1 PD8 39 // X_STOP
* PC10 26 // SDIO_D2 PD9 40 // Y_STOP
* PC11 27 // SDIO_D3 PD10 41 // Z_STOP
* PC12 28 // SDIO_CK PD11 42 // U_STOP
* PC13 70 // E1_DIR PA8 43 // V_STOP
* PC14 69 // E1_RESET PD0 44 // W_STOP
* PC15 66 // Z_RESET PD13 45 // BED_HEAT_2
* PD0 44 // W_STOP PD14 46 // BED_HEAT_1
* PD1 32 //IR_OUT PD15 47 // BED_HEAT_3
* PD2 29 // SDIO_CMD PC7 48 // E1_HEAT_PWM
* PD3 2 // CTS PB0 49 // E2_HEAT_PWM
* PD4 3 // RTS PB1 50 // E3_HEAT_PWM
* PD5 4 // TX PC2 51 // BED_THERMISTOR_1
* PD6 5 // RX PC3 52 // BED_THERMISTOR_2
* PD7 34 // USER3 PA3 53 // BED_THERMISTOR_3
* PD8 39 // X_STOP PA0 54 // E1_THERMISTOR
* PD9 40 // Y_STOP PA1 55 // E2_THERMISTOR
* PD10 41 // Z_STOP PA2 56 // E3_THERMISTOR
* PD11 42 // U_STOP PC4 57 // E1_FAN
* PD12 71 // E1_PWM PC5 58 // E2_FAN
* PD13 45 // BED_HEAT_2 PE8 59 // E3_FAN
* PD14 46 // BED_HEAT_1 PE13 60 // X_RESET
* PD15 47 // BED_HEAT_3 PE14 61 // X_PWM
* PE0 36 // USER2 PE15 62 // X_DIR
* PE1 9 // STATUS_LED PE10 63 // Y_RESET
* PE2 76 // E3_DIR PB10 64 // Y_PWM
* PE3 75 // E3_RESET PE9 65 // Y_DIR
* PE4 72 // E2_RESET PC15 66 // Z_RESET
* PE5 73 // E2_PWM PC6 67 // Z_PWM
* PE6 74 // E2_DIR PC0 68 // Z_DIR
* PE7 38 // USER_BUTTON PC14 69 // E1_RESET
* PE8 59 // E3_FAN PC13 70 // E1_DIR
* PE9 65 // Y_DIR PD12 71 // E1_PWM
* PE10 63 // Y_RESET PE4 72 // E2_RESET
* PE11 7 // WIFI_RESET PE5 73 // E2_PWM
* PE12 8 // WIFI_BOOT PE6 74 // E2_DIR
* PE13 60 // X_RESET PE3 75 // E3_RESET
* PE14 61 // X_PWM PE2 76 // E3_DIR
* PE15 62 // X_DIR PB8 77 // E3_PWM
*/

View File

@ -0,0 +1,65 @@
{
"build": {
"core": "stm32",
"cpu": "cortex-m4",
"extra_flags": "-DSTM32F401xx",
"f_cpu": "84000000L",
"hwids": [
[
"0x1EAF",
"0x0003"
],
[
"0x0483",
"0x3748"
]
],
"ldscript": "stm32f401xe.ld",
"mcu": "stm32f401vet6",
"variant": "STEVAL_F401VE"
},
"debug": {
"jlink_device": "STM32F401VE",
"openocd_target": "stm32f4x",
"svd_path": "STM32F40x.svd",
"tools": {
"stlink": {
"server": {
"arguments": [
"-f",
"scripts/interface/stlink.cfg",
"-c",
"transport select hla_swd",
"-f",
"scripts/target/stm32f4x.cfg",
"-c",
"reset_config none"
],
"executable": "bin/openocd",
"package": "tool-openocd"
}
}
}
},
"frameworks": [
"arduino",
"stm32cube"
],
"name": "STM32F401VE (96k RAM. 512k Flash)",
"upload": {
"disable_flushing": false,
"maximum_ram_size": 98304,
"maximum_size": 514288,
"protocol": "stlink",
"protocols": [
"stlink",
"dfu",
"jlink"
],
"require_upload_port": true,
"use_1200bps_touch": false,
"wait_for_upload_port": false
},
"url": "https://www.st.com/en/evaluation-tools/steval-3dp001v1.html",
"vendor": "Generic"
}

View File

@ -0,0 +1,11 @@
import os
Import("env")
custom_ld_script = os.path.abspath("buildroot/share/PlatformIO/variants/STEVAL_F401VE/ldscript.ld")
for i, flag in enumerate(env["LINKFLAGS"]):
if "-Wl,-T" in flag:
env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script
elif flag == "-T":
env["LINKFLAGS"][i + 1] = custom_ld_script

View File

@ -0,0 +1,274 @@
/*
*******************************************************************************
* Copyright (c) 2019, STMicroelectronics
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
*******************************************************************************
* Automatically generated from STM32F401V(D-E)Tx.xml
*/
#include "Arduino.h"
#include "PeripheralPins.h"
/* =====
* Note: Commented lines are alternative possibilities which are not used per default.
* If you change them, you will have to know what you do
* =====
*/
//*** ADC ***
#ifdef HAL_ADC_MODULE_ENABLED
WEAK const PinMap PinMap_ADC[] = {
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
// {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
// {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
// {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
// {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
// {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
// {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
// {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
// {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
{NC, NP, 0}
};
#endif
//*** No DAC ***
//*** I2C ***
#ifdef HAL_I2C_MODULE_ENABLED
WEAK const PinMap PinMap_I2C_SDA[] = {
// {PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
// {PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
// {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
// {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
{NC, NP, 0}
};
#endif
#ifdef HAL_I2C_MODULE_ENABLED
WEAK const PinMap PinMap_I2C_SCL[] = {
// {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
// {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
// {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{NC, NP, 0}
};
#endif
//*** PWM ***
#ifdef HAL_TIM_MODULE_ENABLED
WEAK const PinMap PinMap_PWM[] = {
// {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
// {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
// {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
// {PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
// {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
// {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
// {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
// {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
// {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
// {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
// {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
// {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
// {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
// {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
// {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
// {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
// {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
// {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
// {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
// {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
// {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
// {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
// {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
// {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
// {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
// {PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
// {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
// {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
// {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
// {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
// {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
// {PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
// {PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
// {PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
// {PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
// {PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
// {PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
// {PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
{NC, NP, 0}
};
#endif
//*** SERIAL ***
#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_TX[] = {
// {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PA_11, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
// {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{NC, NP, 0}
};
#endif
#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_RX[] = {
// {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PA_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
// {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{NC, NP, 0}
};
#endif
#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_RTS[] = {
// {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
// {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{NC, NP, 0}
};
#endif
#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_CTS[] = {
// {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
// {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{NC, NP, 0}
};
#endif
//*** SPI ***
#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_MOSI[] = {
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PD_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PE_6, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
// {PE_14, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
{NC, NP, 0}
};
#endif
#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_MISO[] = {
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PE_5, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
// {PE_13, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
{NC, NP, 0}
};
#endif
#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_SCLK[] = {
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PE_2, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
// {PE_12, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
{NC, NP, 0}
};
#endif
#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_SSEL[] = {
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PE_4, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
// {PE_11, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
{NC, NP, 0}
};
#endif
//*** No CAN ***
//*** No ETHERNET ***
//*** No QUADSPI ***
//*** USB ***
#ifdef HAL_PCD_MODULE_ENABLED
WEAK const PinMap PinMap_USB_OTG_FS[] = {
// {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
// {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
// {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
{NC, NP, 0}
};
#endif
//*** No USB_OTG_HS ***
//*** SD ***
#ifdef HAL_SD_MODULE_ENABLED
WEAK const PinMap PinMap_SD[] = {
// {PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
// {PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
// {PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
// {PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
{NC, NP, 0}
};
#endif

View File

@ -0,0 +1,33 @@
/* SYS_WKUP */
#ifdef PWR_WAKEUP_PIN1
SYS_WKUP1 = PA_0,
#endif
#ifdef PWR_WAKEUP_PIN2
SYS_WKUP2 = NC,
#endif
#ifdef PWR_WAKEUP_PIN3
SYS_WKUP3 = NC,
#endif
#ifdef PWR_WAKEUP_PIN4
SYS_WKUP4 = NC,
#endif
#ifdef PWR_WAKEUP_PIN5
SYS_WKUP5 = NC,
#endif
#ifdef PWR_WAKEUP_PIN6
SYS_WKUP6 = NC,
#endif
#ifdef PWR_WAKEUP_PIN7
SYS_WKUP7 = NC,
#endif
#ifdef PWR_WAKEUP_PIN8
SYS_WKUP8 = NC,
#endif
/* USB */
#ifdef USBCON
USB_OTG_FS_SOF = PA_8,
USB_OTG_FS_VBUS = PA_9,
USB_OTG_FS_ID = PA_10,
USB_OTG_FS_DM = PA_11,
USB_OTG_FS_DP = PA_12,
#endif

View File

@ -0,0 +1,496 @@
/**
******************************************************************************
* @file stm32f4xx_hal_conf.h
* @brief HAL configuration file.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_CONF_CUSTOM
#define __STM32F4xx_HAL_CONF_CUSTOM
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
/* #define HAL_CAN_MODULE_ENABLED */
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
#define HAL_CRC_MODULE_ENABLED
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
//#define HAL_DAC_MODULE_ENABLED
/* #define HAL_DCMI_MODULE_ENABLED */
#define HAL_DMA_MODULE_ENABLED
/* #define HAL_DMA2D_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */
#define HAL_FLASH_MODULE_ENABLED
/* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_PCCARD_MODULE_ENABLED */
/* #define HAL_SRAM_MODULE_ENABLED */
/* #define HAL_SDRAM_MODULE_ENABLED */
/* #define HAL_HASH_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
/* #define HAL_EXTI_MODULE_ENABLED */
#define HAL_I2C_MODULE_ENABLED
/* #define HAL_SMBUS_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */
/* #define HAL_IWDG_MODULE_ENABLED */
/* #define HAL_LTDC_MODULE_ENABLED */
/* #define HAL_DSI_MODULE_ENABLED */
#define HAL_PWR_MODULE_ENABLED
/* #define HAL_QSPI_MODULE_ENABLED */
#define HAL_RCC_MODULE_ENABLED
/* #define HAL_RNG_MODULE_ENABLED */
#define HAL_RTC_MODULE_ENABLED
/* #define HAL_SAI_MODULE_ENABLED */
#define HAL_SD_MODULE_ENABLED
#define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED
/* #define HAL_UART_MODULE_ENABLED */
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
#define HAL_CORTEX_MODULE_ENABLED
#ifndef HAL_PCD_MODULE_ENABLED
#define HAL_PCD_MODULE_ENABLED //Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
#endif
/* #define HAL_HCD_MODULE_ENABLED */
/* #define HAL_FMPI2C_MODULE_ENABLED */
/* #define HAL_SPDIFRX_MODULE_ENABLED */
/* #define HAL_DFSDM_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
/* #define HAL_MMC_MODULE_ENABLED */
/* ########################## HSE/HSI Values adaptation ##################### */
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#ifndef HSE_VALUE
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#ifndef HSE_STARTUP_TIMEOUT
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#ifndef HSI_VALUE
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#ifndef LSI_VALUE
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature. */
/**
* @brief External Low Speed oscillator (LSE) value.
*/
#ifndef LSE_VALUE
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
#endif /* LSE_VALUE */
#ifndef LSE_STARTUP_TIMEOUT
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
* @brief External clock source for I2S peripheral
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#ifndef EXTERNAL_CLOCK_VALUE
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#if !defined (VDD_VALUE)
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
#endif
#if !defined (TICK_INT_PRIORITY)
#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */
#endif
#if !defined (USE_RTOS)
#define USE_RTOS 0U
#endif
#if !defined (PREFETCH_ENABLE)
#define PREFETCH_ENABLE 1U
#endif
#if !defined (INSTRUCTION_CACHE_ENABLE)
#define INSTRUCTION_CACHE_ENABLE 1U
#endif
#if !defined (DATA_CACHE_ENABLE)
#define DATA_CACHE_ENABLE 1U
#endif
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
/* ################## Ethernet peripheral configuration ##################### */
/* Section 1 : Ethernet peripheral configuration */
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
#define MAC_ADDR0 2U
#define MAC_ADDR1 0U
#define MAC_ADDR2 0U
#define MAC_ADDR3 0U
#define MAC_ADDR4 0U
#define MAC_ADDR5 0U
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
/* Section 2: PHY configuration section */
/* DP83848_PHY_ADDRESS Address*/
#define DP83848_PHY_ADDRESS 0x01U
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY 0x000000FFU
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY 0x00000FFFU
#define PHY_READ_TO 0x0000FFFFU
#define PHY_WRITE_TO 0x0000FFFFU
/* Section 3: Common PHY Registers */
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#ifndef USE_SPI_CRC
#define USE_SPI_CRC 0U
#endif
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32f4xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f4xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32f4xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f4xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f4xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32f4xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CAN_MODULE_ENABLED
#include "stm32f4xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
#include "stm32f4xx_hal_can_legacy.h"
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32f4xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32f4xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_DMA2D_MODULE_ENABLED
#include "stm32f4xx_hal_dma2d.h"
#endif /* HAL_DMA2D_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32f4xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_DCMI_MODULE_ENABLED
#include "stm32f4xx_hal_dcmi.h"
#endif /* HAL_DCMI_MODULE_ENABLED */
#ifdef HAL_ETH_MODULE_ENABLED
#include "stm32f4xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f4xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32f4xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
#include "stm32f4xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_PCCARD_MODULE_ENABLED
#include "stm32f4xx_hal_pccard.h"
#endif /* HAL_PCCARD_MODULE_ENABLED */
#ifdef HAL_SDRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sdram.h"
#endif /* HAL_SDRAM_MODULE_ENABLED */
#ifdef HAL_HASH_MODULE_ENABLED
#include "stm32f4xx_hal_hash.h"
#endif /* HAL_HASH_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32f4xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_SMBUS_MODULE_ENABLED
#include "stm32f4xx_hal_smbus.h"
#endif /* HAL_SMBUS_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32f4xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32f4xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LTDC_MODULE_ENABLED
#include "stm32f4xx_hal_ltdc.h"
#endif /* HAL_LTDC_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32f4xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32f4xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32f4xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SAI_MODULE_ENABLED
#include "stm32f4xx_hal_sai.h"
#endif /* HAL_SAI_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
#include "stm32f4xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32f4xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32f4xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32f4xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32f4xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32f4xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32f4xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32f4xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32f4xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f4xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_DSI_MODULE_ENABLED
#include "stm32f4xx_hal_dsi.h"
#endif /* HAL_DSI_MODULE_ENABLED */
#ifdef HAL_QSPI_MODULE_ENABLED
#include "stm32f4xx_hal_qspi.h"
#endif /* HAL_QSPI_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32f4xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_FMPI2C_MODULE_ENABLED
#include "stm32f4xx_hal_fmpi2c.h"
#endif /* HAL_FMPI2C_MODULE_ENABLED */
#ifdef HAL_SPDIFRX_MODULE_ENABLED
#include "stm32f4xx_hal_spdifrx.h"
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
#ifdef HAL_DFSDM_MODULE_ENABLED
#include "stm32f4xx_hal_dfsdm.h"
#endif /* HAL_DFSDM_MODULE_ENABLED */
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32f4xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32f4xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t *file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_CONF_CUSTOM_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,187 @@
/*
*****************************************************************************
**
** File : ldscript.ld
**
** Abstract : Linker script for STM32F401RETx Device with
** 512KByte FLASH, 96KByte RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
**
** Distribution: The file is distributed as is, without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** <h2><center>&copy; COPYRIGHT(c) 2014 Ac6</center></h2>
**
** Redistribution and use in source and binary forms, with or without modification,
** are permitted provided that the following conditions are met:
** 1. Redistributions of source code must retain the above copyright notice,
** this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright notice,
** this list of conditions and the following disclaimer in the documentation
** and/or other materials provided with the distribution.
** 3. Neither the name of Ac6 nor the names of its contributors
** may be used to endorse or promote products derived from this software
** without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
*****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20018000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(4);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(4);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

View File

@ -0,0 +1,315 @@
/*
*******************************************************************************
* Copyright (c) 2017, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef _VARIANT_ARDUINO_STM32_
#define _VARIANT_ARDUINO_STM32_
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
/*----------------------------------------------------------------------------
* Pins
*----------------------------------------------------------------------------*/
#if defined(ARDUINO_STEVAL)
/*----------------------------------------------------------------------------
* Pins
*----------------------------------------------------------------------------*/
// USART1_MAIN
#define PA9 0 //TX
#define PA10 1 //RX
// WIFI
#define PD3 2 // CTS
#define PD4 3 // RTS
#define PD5 4 // TX
#define PD6 5 // RX
#define PB5 6 // WIFI_WAKEUP
#define PE11 7 // WIFI_RESET
#define PE12 8 // WIFI_BOOT
// STATUS_LED
#define PE1 9 // STATUS_LED
// SPI USER
#define PB12 10 // SPI_CS
#define PB15 11 // SPI_MOSI
#define PB14 12 // SPI_MISO
#define PB13 13 // SPI_SCK
// I2C USER
#define PB7 14 // SDA
#define PB6 15 // SCL
// SPI
#define PA4 16 // SPI_CS
#define PA5 17 // SPI_SCK
#define PA6 18 // SPI_MISO
#define PA7 19 // SPI_MOSI
// JTAG
#define PA13 20 // JTAG_TMS/SWDIO
#define PA14 21 // JTAG_TCK/SWCLK
#define PB3 22 // JTAG_TDO/SWO
// SDCARD
#define PC8 23 // SDIO_D0
#define PC9 24 // SDIO_D1
#define PA15 25 // SD_CARD_DETECT
#define PC10 26 // SDIO_D2
#define PC11 27 // SDIO_D3
#define PC12 28 // SDIO_CK
#define PD2 29 // SDIO_CMD
// OTG
#define PA11 30 //OTG_DM
#define PA12 31 //OTG_DP
// IR/PROBE
#define PD1 32 //IR_OUT
#define PC1 33 //IR_ON
// USER_PINS
#define PD7 34 // USER3
#define PB9 35 // USER1
#define PE0 36 // USER2
#define PB4 37 // USER4
// USERKET
#define PE7 38 // USER_BUTTON
// ENDSTOPS
#define PD8 39 // X_STOP
#define PD9 40 // Y_STOP
#define PD10 41 // Z_STOP
#define PD11 42 // U_STOP
#define PA8 43 // V_STOP
#define PD0 44 // W_STOP
// HEATERS
#define PD13 45 // BED_HEAT_2
#define PD14 46 // BED_HEAT_1
#define PD15 47 // BED_HEAT_3
#define PC7 48 // E1_HEAT_PWM
#define PB0 49 // E2_HEAT_PWM
#define PB1 50 // E3_HEAT_PWM
// THERMISTOR
#define PC2 51 // BED_THERMISTOR_1
#define PC3 52 // BED_THERMISTOR_2
#define PA3 53 // BED_THERMISTOR_3
#define PA0 54 // E1_THERMISTOR
#define PA1 55 // E2_THERMISTOR
#define PA2 56 // E3_THERMISTOR
// FANS
#define PC4 57 // E1_FAN
#define PC5 58 // E2_FAN
#define PE8 59 // E3_FAN
// X_MOTOR
#define PE13 60 // X_RESET
#define PE14 61 // X_PWM
#define PE15 62 // X_DIR
// Y_MOTOR
#define PE10 63 // Y_RESET
#define PB10 64 // Y_PWM
#define PE9 65 // Y_DIR
// Z_MOTOR
#define PC15 66 // Z_RESET
#define PC6 67 // Z_PWM
#define PC0 68 // Z_DIR
// E1_MOTOR
#define PC14 69 // E1_RESET
#define PC13 70 // E1_DIR
#define PD12 71 // E1_PWM
// E2_MOTOR
#define PE4 72 // E2_RESET
#define PE5 73 // E2_PWM
#define PE6 74 // E2_DIR
// E3_MOTOR
#define PE3 75 // E3_RESET
#define PE2 76 // E3_DIR
#define PB8 77 // E3_PWM
// This must be a literal
#define NUM_DIGITAL_PINS 78
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
#define NUM_ANALOG_INPUTS 6
#define NUM_ANALOG_FIRST 51
// On-board LED pin number
#define LED_BUILTIN PE1
#define LED_GREEN LED_BUILTIN
// On-board user button
#define USER_BTN PE7
// UART Definitions
#define SERIAL_UART_INSTANCE 1 //Connected to ST-Link
// Default pin used for 'Serial' instance (ex: ST-Link)
// Mandatory for Firmata
#define PIN_SERIAL_RX PA10
#define PIN_SERIAL_TX PA9
/* SD detect signal */
/*
* By default, R67 is not provided, so SD card detect is not used.
* Note: SD CD (pin 16 of expansion connector J23) can be connected
* to GND in order to be able to use SD_DETECT_PIN
*/
/*#define SD_DETECT_PIN PA15*/
/* HAL configuration */
#define HSE_VALUE 25000000U
/* Extra HAL modules */
#define HAL_SD_MODULE_ENABLED
#endif
#ifdef __cplusplus
} // extern "C"
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#ifdef __cplusplus
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_HARDWARE Serial1
#endif
#endif // _VARIANT_ARDUINO_STM32_
// PA0 54 // E1_THERMISTOR
// PA1 55 // E2_THERMISTOR
// PA2 56 // E3_THERMISTOR
// PA3 53 // BED_THERMISTOR_3
// PA4 16 // SPI_CS
// PA5 17 // SPI_SCK
// PA6 18 // SPI_MISO
// PA7 19 // SPI_MOSI
// PA8 43 // V_STOP
// PA9 0 //TX
// PA10 1 //RX
// PA11 30 //OTG_DM
// PA12 31 //OTG_DP
// PA13 20 // JTAG_TMS/SWDIO
// PA14 21 // JTAG_TCK/SWCLK
// PA15 25 // SD_CARD_DETECT
// PB0 49 // E2_HEAT_PWM
// PB1 50 // E3_HEAT_PWM
// PB3 22 // JTAG_TDO/SWO
// PB4 37 // USER4
// PB5 6 // WIFI_WAKEUP
// PB6 15 // SCL
// PB7 14 // SDA
// PB8 77 // E3_PWM
// PB9 35 // USER1
// PB10 64 // Y_PWM
// PB12 10 // SPI_CS
// PB13 13 // SPI_SCK
// PB14 12 // SPI_MISO
// PB15 11 // SPI_MOSI
// PC0 68 // Z_DIR
// PC1 33 //IR_ON
// PC2 51 // BED_THERMISTOR_1
// PC3 52 // BED_THERMISTOR_2
// PC4 57 // E1_FAN
// PC5 58 // E2_FAN
// PC6 67 // Z_PWM
// PC7 48 // E1_HEAT_PWM
// PC8 23 // SDIO_D0
// PC9 24 // SDIO_D1
// PC10 26 // SDIO_D2
// PC11 27 // SDIO_D3
// PC12 28 // SDIO_CK
// PC13 70 // E1_DIR
// PC14 69 // E1_RESET
// PC15 66 // Z_RESET
// PD0 44 // W_STOP
// PD1 32 //IR_OUT
// PD2 29 // SDIO_CMD
// PD3 2 // CTS
// PD4 3 // RTS
// PD5 4 // TX
// PD6 5 // RX
// PD7 34 // USER3
// PD8 39 // X_STOP
// PD9 40 // Y_STOP
// PD10 41 // Z_STOP
// PD11 42 // U_STOP
// PD12 71 // E1_PWM
// PD13 45 // BED_HEAT_2
// PD14 46 // BED_HEAT_1
// PD15 47 // BED_HEAT_3
// PE0 36 // USER2
// PE1 9 // STATUS_LED
// PE2 76 // E3_DIR
// PE3 75 // E3_RESET
// PE4 72 // E2_RESET
// PE5 73 // E2_PWM
// PE6 74 // E2_DIR
// PE7 38 // USER_BUTTON
// PE8 59 // E3_FAN
// PE9 65 // Y_DIR
// PE10 63 // Y_RESET
// PE11 7 // WIFI_RESET
// PE12 8 // WIFI_BOOT
// PE13 60 // X_RESET
// PE14 61 // X_PWM
// PE15 62 // X_DIR

View File

@ -581,6 +581,25 @@ src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_ignore = Adafruit NeoPixel lib_ignore = Adafruit NeoPixel
monitor_speed = 250000 monitor_speed = 250000
#
# STM32F401VE
# 'STEVAL-3DP001)' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
#
[env:STM32F401VE_STEVAL]
platform = ststm32
board = STEVAL_STM32F401VE
platform_packages = framework-arduinoststm32@>=3.10700.191028
build_flags = ${common.build_flags}
-DTARGET_STM32F4 -DARDUINO_STEVAL -DSTM32F401xE
-DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STEVAL_F401VE\"
-DDISABLE_GENERIC_SERIALUSB
-IMarlin/src/HAL/HAL_STM32
build_unflags = -std=gnu++11
extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/STEVAL__F401XX.py
lib_ignore = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster, SoftwareSerial
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
monitor_speed = 250000
# #
# FLYF407ZG # FLYF407ZG