diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 70c5929bd..630b6f188 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -764,8 +764,7 @@ void enqueue_and_echo_command_now(const char* cmd) { bool enqueue_and_echo_command(const char* cmd, bool say_ok/*=false*/) { if (_enqueuecommand(cmd, say_ok)) { SERIAL_ECHO_START; - SERIAL_ECHOPGM(MSG_Enqueueing); - SERIAL_ECHO(cmd); + SERIAL_ECHOPAIR(MSG_Enqueueing, cmd); SERIAL_ECHOLNPGM("\""); return true; } @@ -1354,8 +1353,8 @@ static void set_axis_is_at_home(AxisEnum axis) { float homeposition[XYZ]; LOOP_XYZ(i) homeposition[i] = LOGICAL_POSITION(base_home_pos(i), i); - // SERIAL_ECHOPGM("homeposition[x]= "); SERIAL_ECHO(homeposition[0]); - // SERIAL_ECHOPGM("homeposition[y]= "); SERIAL_ECHOLN(homeposition[1]); + // SERIAL_ECHOPAIR("homeposition X:", homeposition[X_AXIS]); + // SERIAL_ECHOLNPAIR(" Y:", homeposition[Y_AXIS]); /** * Works out real Homeposition angles using inverse kinematics, @@ -1364,8 +1363,8 @@ static void set_axis_is_at_home(AxisEnum axis) { inverse_kinematics(homeposition); forward_kinematics_SCARA(delta[A_AXIS], delta[B_AXIS]); - // SERIAL_ECHOPAIR("Delta X=", cartes[X_AXIS]); - // SERIAL_ECHOPGM(" Delta Y="); SERIAL_ECHOLN(cartes[Y_AXIS]); + // SERIAL_ECHOPAIR("Cartesian X:", cartes[X_AXIS]); + // SERIAL_ECHOLNPAIR(" Y:", cartes[Y_AXIS]); current_position[axis] = LOGICAL_POSITION(cartes[axis], axis); @@ -2019,17 +2018,11 @@ static void clean_up_after_endstop_or_probe_move() { feedrate_mm_s = XY_PROBE_FEEDRATE_MM_S; do_blocking_move_to_xy(x - (X_PROBE_OFFSET_FROM_EXTRUDER), y - (Y_PROBE_OFFSET_FROM_EXTRUDER)); - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> "); - #endif if (DEPLOY_PROBE()) return NAN; float measured_z = run_z_probe(); if (stow) { - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> "); - #endif if (STOW_PROBE()) return NAN; } else { @@ -2203,12 +2196,7 @@ static void homeaxis(AxisEnum axis) { // Homing Z towards the bed? Deploy the Z probe or endstop. #if HOMING_Z_WITH_PROBE - if (axis == Z_AXIS) { - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> "); - #endif - if (DEPLOY_PROBE()) return; - } + if (axis == Z_AXIS && DEPLOY_PROBE()) return; #endif // Set a flag for Z motor locking @@ -2286,12 +2274,7 @@ static void homeaxis(AxisEnum axis) { // Put away the Z probe #if HOMING_Z_WITH_PROBE - if (axis == Z_AXIS) { - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> "); - #endif - if (STOW_PROBE()) return; - } + if (axis == Z_AXIS && STOW_PROBE()) return; #endif #if ENABLED(DEBUG_LEVELING_FEATURE) @@ -2416,8 +2399,7 @@ void gcode_get_destination() { void unknown_command_error() { SERIAL_ECHO_START; - SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND); - SERIAL_ECHO(current_command); + SERIAL_ECHOPAIR(MSG_UNKNOWN_COMMAND, current_command); SERIAL_ECHOLNPGM("\""); } @@ -3713,10 +3695,7 @@ inline void gcode_G28() { #ifdef Z_PROBE_END_SCRIPT #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPGM("Z Probe End Script: "); - SERIAL_ECHOLNPGM(Z_PROBE_END_SCRIPT); - } + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("Z Probe End Script: ", Z_PROBE_END_SCRIPT); #endif enqueue_and_echo_commands_P(PSTR(Z_PROBE_END_SCRIPT)); stepper.synchronize(); @@ -4002,8 +3981,7 @@ inline void gcode_M31() { lcd_setstatus(buffer); SERIAL_ECHO_START; - SERIAL_ECHOPGM("Print time: "); - SERIAL_ECHOLN(buffer); + SERIAL_ECHOLNPAIR("Print time: ", buffer); thermalManager.autotempShutdown(); } @@ -5358,8 +5336,7 @@ inline void gcode_M206() { endstop_adj[i] = code_value_axis_units(i); #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPGM("endstop_adj["); - SERIAL_ECHO(axis_codes[i]); + SERIAL_ECHOPAIR("endstop_adj[", axis_codes[i]); SERIAL_ECHOLNPAIR("] = ", endstop_adj[i]); } #endif @@ -5442,16 +5419,17 @@ inline void gcode_M211() { if (code_seen('S')) soft_endstops_enabled = code_value_bool(); #endif #if ENABLED(min_software_endstops) || ENABLED(max_software_endstops) - SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS ": "); + SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS); serialprintPGM(soft_endstops_enabled ? PSTR(MSG_ON) : PSTR(MSG_OFF)); #else - SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS ": " MSG_OFF); + SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS); + SERIAL_ECHOPGM(MSG_OFF); #endif - SERIAL_ECHOPGM(" " MSG_SOFT_MIN ": "); + SERIAL_ECHOPGM(MSG_SOFT_MIN); SERIAL_ECHOPAIR( MSG_X, soft_endstop_min[X_AXIS]); SERIAL_ECHOPAIR(" " MSG_Y, soft_endstop_min[Y_AXIS]); SERIAL_ECHOPAIR(" " MSG_Z, soft_endstop_min[Z_AXIS]); - SERIAL_ECHOPGM(" " MSG_SOFT_MAX ": "); + SERIAL_ECHOPGM(MSG_SOFT_MAX); SERIAL_ECHOPAIR( MSG_X, soft_endstop_max[X_AXIS]); SERIAL_ECHOPAIR(" " MSG_Y, soft_endstop_max[Y_AXIS]); SERIAL_ECHOLNPAIR(" " MSG_Z, soft_endstop_max[Z_AXIS]); @@ -5569,17 +5547,14 @@ inline void gcode_M226() { MOVE_SERVO(servo_index, code_value_int()); else { SERIAL_ECHO_START; - SERIAL_ECHOPGM(" Servo "); - SERIAL_ECHO(servo_index); - SERIAL_ECHOPGM(": "); - SERIAL_ECHOLN(servo[servo_index].read()); + SERIAL_ECHOPAIR(" Servo ", servo_index); + SERIAL_ECHOLNPAIR(": ", servo[servo_index].read()); } } else { SERIAL_ERROR_START; - SERIAL_ERROR("Servo "); - SERIAL_ERROR(servo_index); - SERIAL_ERRORLN(" out of range"); + SERIAL_ECHOPAIR("Servo ", servo_index); + SERIAL_ECHOLNPGM(" out of range"); } } @@ -5635,19 +5610,14 @@ inline void gcode_M226() { thermalManager.updatePID(); SERIAL_ECHO_START; #if ENABLED(PID_PARAMS_PER_HOTEND) - SERIAL_ECHOPGM(" e:"); // specify extruder in serial output - SERIAL_ECHO(e); + SERIAL_ECHOPAIR(" e:", e); // specify extruder in serial output #endif // PID_PARAMS_PER_HOTEND - SERIAL_ECHOPGM(" p:"); - SERIAL_ECHO(PID_PARAM(Kp, e)); - SERIAL_ECHOPGM(" i:"); - SERIAL_ECHO(unscalePID_i(PID_PARAM(Ki, e))); - SERIAL_ECHOPGM(" d:"); - SERIAL_ECHO(unscalePID_d(PID_PARAM(Kd, e))); + SERIAL_ECHOPAIR(" p:", PID_PARAM(Kp, e)); + SERIAL_ECHOPAIR(" i:", unscalePID_i(PID_PARAM(Ki, e))); + SERIAL_ECHOPAIR(" d:", unscalePID_d(PID_PARAM(Kd, e))); #if ENABLED(PID_EXTRUSION_SCALING) - SERIAL_ECHOPGM(" c:"); //Kc does not have scaling applied above, or in resetting defaults - SERIAL_ECHO(PID_PARAM(Kc, e)); + SERIAL_ECHOPAIR(" c:", PID_PARAM(Kc, e)); #endif SERIAL_EOL; } @@ -5669,12 +5639,9 @@ inline void gcode_M226() { thermalManager.updatePID(); SERIAL_ECHO_START; - SERIAL_ECHOPGM(" p:"); - SERIAL_ECHO(thermalManager.bedKp); - SERIAL_ECHOPGM(" i:"); - SERIAL_ECHO(unscalePID_i(thermalManager.bedKi)); - SERIAL_ECHOPGM(" d:"); - SERIAL_ECHOLN(unscalePID_d(thermalManager.bedKd)); + SERIAL_ECHOPAIR(" p:", thermalManager.bedKp); + SERIAL_ECHOPAIR(" i:", unscalePID_i(thermalManager.bedKi)); + SERIAL_ECHOLNPAIR(" d:", unscalePID_d(thermalManager.bedKd)); } #endif // PIDTEMPBED @@ -6138,11 +6105,9 @@ inline void gcode_M503() { SERIAL_ECHO(zprobe_zoffset); } else { - SERIAL_ECHOPGM(MSG_Z_MIN); - SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MIN); + SERIAL_ECHOPAIR(MSG_Z_MIN, Z_PROBE_OFFSET_RANGE_MIN); SERIAL_CHAR(' '); - SERIAL_ECHOPGM(MSG_Z_MAX); - SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MAX); + SERIAL_ECHOPAIR(MSG_Z_MAX, Z_PROBE_OFFSET_RANGE_MAX); } } else { @@ -6863,8 +6828,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n #endif // HOTENDS <= 1 SERIAL_ECHO_START; - SERIAL_ECHOPGM(MSG_ACTIVE_EXTRUDER); - SERIAL_PROTOCOLLN((int)active_extruder); + SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, (int)active_extruder); #endif //!MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1 } @@ -7685,13 +7649,13 @@ void ok_to_send() { - sq(delta_tower3_y - cartesian[Y_AXIS]) ) + cartesian[Z_AXIS]; /** - SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]); - SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]); - SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]); + SERIAL_ECHOPAIR("cartesian x=", cartesian[X_AXIS]); + SERIAL_ECHOPAIR(" y=", cartesian[Y_AXIS]); + SERIAL_ECHOLNPAIR(" z=", cartesian[Z_AXIS]); - SERIAL_ECHOPGM("delta a="); SERIAL_ECHO(delta[A_AXIS]); - SERIAL_ECHOPGM(" b="); SERIAL_ECHO(delta[B_AXIS]); - SERIAL_ECHOPGM(" c="); SERIAL_ECHOLN(delta[C_AXIS]); + SERIAL_ECHOPAIR("delta a=", delta[A_AXIS]); + SERIAL_ECHOPAIR(" b=", delta[B_AXIS]); + SERIAL_ECHOLNPAIR(" c=", delta[C_AXIS]); */ } @@ -7806,19 +7770,19 @@ void ok_to_send() { delta[Z_AXIS] += offset; /** - SERIAL_ECHOPGM("grid_x="); SERIAL_ECHO(grid_x); - SERIAL_ECHOPGM(" grid_y="); SERIAL_ECHO(grid_y); - SERIAL_ECHOPGM(" floor_x="); SERIAL_ECHO(floor_x); - SERIAL_ECHOPGM(" floor_y="); SERIAL_ECHO(floor_y); - SERIAL_ECHOPGM(" ratio_x="); SERIAL_ECHO(ratio_x); - SERIAL_ECHOPGM(" ratio_y="); SERIAL_ECHO(ratio_y); - SERIAL_ECHOPGM(" z1="); SERIAL_ECHO(z1); - SERIAL_ECHOPGM(" z2="); SERIAL_ECHO(z2); - SERIAL_ECHOPGM(" z3="); SERIAL_ECHO(z3); - SERIAL_ECHOPGM(" z4="); SERIAL_ECHO(z4); - SERIAL_ECHOPGM(" left="); SERIAL_ECHO(left); - SERIAL_ECHOPGM(" right="); SERIAL_ECHO(right); - SERIAL_ECHOPGM(" offset="); SERIAL_ECHOLN(offset); + SERIAL_ECHOPAIR("grid_x=", grid_x); + SERIAL_ECHOPAIR(" grid_y=", grid_y); + SERIAL_ECHOPAIR(" floor_x=", floor_x); + SERIAL_ECHOPAIR(" floor_y=", floor_y); + SERIAL_ECHOPAIR(" ratio_x=", ratio_x); + SERIAL_ECHOPAIR(" ratio_y=", ratio_y); + SERIAL_ECHOPAIR(" z1=", z1); + SERIAL_ECHOPAIR(" z2=", z2); + SERIAL_ECHOPAIR(" z3=", z3); + SERIAL_ECHOPAIR(" z4=", z4); + SERIAL_ECHOPAIR(" left=", left); + SERIAL_ECHOPAIR(" right=", right); + SERIAL_ECHOLNPAIR(" offset=", offset); */ } #endif // AUTO_BED_LEVELING_NONLINEAR @@ -7910,9 +7874,9 @@ void mesh_line_to_destination(float fr_mm_s, uint8_t x_splits = 0xff, uint8_t y_ int steps = max(1, int(delta_segments_per_second * seconds)); float inv_steps = 1.0/steps; - // SERIAL_ECHOPGM("mm="); SERIAL_ECHO(cartesian_mm); - // SERIAL_ECHOPGM(" seconds="); SERIAL_ECHO(seconds); - // SERIAL_ECHOPGM(" steps="); SERIAL_ECHOLN(steps); + // SERIAL_ECHOPAIR("mm=", cartesian_mm); + // SERIAL_ECHOPAIR(" seconds=", seconds); + // SERIAL_ECHOLNPAIR(" steps=", steps); for (int s = 1; s <= steps; s++) { @@ -8263,24 +8227,24 @@ void prepare_move_to_destination() { float a_sin, a_cos, b_sin, b_cos; - //SERIAL_ECHOPGM("f_delta x="); SERIAL_ECHO(a); - //SERIAL_ECHOPGM(" y="); SERIAL_ECHO(b); - a_sin = sin(RADIANS(a)) * L1; a_cos = cos(RADIANS(a)) * L1; b_sin = sin(RADIANS(b)) * L2; b_cos = cos(RADIANS(b)) * L2; - //SERIAL_ECHOPGM(" a_sin="); SERIAL_ECHO(a_sin); - //SERIAL_ECHOPGM(" a_cos="); SERIAL_ECHO(a_cos); - //SERIAL_ECHOPGM(" b_sin="); SERIAL_ECHO(b_sin); - //SERIAL_ECHOPGM(" b_cos="); SERIAL_ECHOLN(b_cos); - cartes[X_AXIS] = a_cos + b_cos + SCARA_OFFSET_X; //theta cartes[Y_AXIS] = a_sin + b_sin + SCARA_OFFSET_Y; //theta+phi - //SERIAL_ECHOPGM(" cartes[X_AXIS]="); SERIAL_ECHO(cartes[X_AXIS]); - //SERIAL_ECHOPGM(" cartes[Y_AXIS]="); SERIAL_ECHOLN(cartes[Y_AXIS]); + /* + SERIAL_ECHOPAIR("f_delta x=", a); + SERIAL_ECHOPAIR(" y=", b); + SERIAL_ECHOPAIR(" a_sin=", a_sin); + SERIAL_ECHOPAIR(" a_cos=", a_cos); + SERIAL_ECHOPAIR(" b_sin=", b_sin); + SERIAL_ECHOLNPAIR(" b_cos=", b_cos); + SERIAL_ECHOPAIR(" cartes[X_AXIS]=", cartes[X_AXIS]); + SERIAL_ECHOLNPAIR(" cartes[Y_AXIS]=", cartes[Y_AXIS]); + //*/ } void inverse_kinematics(const float cartesian[XYZ]) { @@ -8771,25 +8735,21 @@ void setup() { MCUSR = 0; SERIAL_ECHOPGM(MSG_MARLIN); - SERIAL_ECHOLNPGM(" " SHORT_BUILD_VERSION); + SERIAL_CHAR(' '); + SERIAL_ECHOLNPGM(SHORT_BUILD_VERSION); + SERIAL_EOL; - #ifdef STRING_DISTRIBUTION_DATE - #ifdef STRING_CONFIG_H_AUTHOR - SERIAL_ECHO_START; - SERIAL_ECHOPGM(MSG_CONFIGURATION_VER); - SERIAL_ECHOPGM(STRING_DISTRIBUTION_DATE); - SERIAL_ECHOPGM(MSG_AUTHOR); - SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR); - SERIAL_ECHOPGM("Compiled: "); - SERIAL_ECHOLNPGM(__DATE__); - #endif // STRING_CONFIG_H_AUTHOR - #endif // STRING_DISTRIBUTION_DATE + #if defined(STRING_DISTRIBUTION_DATE) && defined(STRING_CONFIG_H_AUTHOR) + SERIAL_ECHO_START; + SERIAL_ECHOPGM(MSG_CONFIGURATION_VER); + SERIAL_ECHOPGM(STRING_DISTRIBUTION_DATE); + SERIAL_ECHOLNPGM(MSG_AUTHOR STRING_CONFIG_H_AUTHOR); + SERIAL_ECHOLNPGM("Compiled: " __DATE__); + #endif SERIAL_ECHO_START; - SERIAL_ECHOPGM(MSG_FREE_MEMORY); - SERIAL_ECHO(freeMemory()); - SERIAL_ECHOPGM(MSG_PLANNER_BUFFER_BYTES); - SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE); + SERIAL_ECHOPAIR(MSG_FREE_MEMORY, freeMemory()); + SERIAL_ECHOLNPAIR(MSG_PLANNER_BUFFER_BYTES, (int)sizeof(block_t)*BLOCK_BUFFER_SIZE); // Send "ok" after commands by default for (int8_t i = 0; i < BUFSIZE; i++) send_ok[i] = true; diff --git a/Marlin/language.h b/Marlin/language.h index e6c1b8efd..6311e6c60 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -157,9 +157,9 @@ #define MSG_ENDSTOP_OPEN "open" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_DUPLICATION_MODE "Duplication mode: " -#define MSG_SOFT_ENDSTOPS "Soft endstops" -#define MSG_SOFT_MIN "Min" -#define MSG_SOFT_MAX "Max" +#define MSG_SOFT_ENDSTOPS "Soft endstops: " +#define MSG_SOFT_MIN " Min: " +#define MSG_SOFT_MAX " Max: " #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir " #define MSG_SD_INIT_FAIL "SD init fail"