CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update on makefile, should make it easier to compile for different boards without changing the makefile. (Still missing Arduino 1.x.x support).

Browse Source
This commit is contained in:
daid303 2012-11-11 11:05:52 +01:00
parent 40ce057a3e
commit 789be03b4f
1 changed files with 170 additions and 92 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

262
Marlin/Makefile
View File

@ -3,6 +3,7 @@
# Makefile Based on: # Makefile Based on:
# Arduino 0011 Makefile # Arduino 0011 Makefile
# Arduino adaptation by mellis, eighthave, oli.keller # Arduino adaptation by mellis, eighthave, oli.keller
# Marlin adaption by Daid
# #
# This has been tested with Arduino 0022. # This has been tested with Arduino 0022.
# #
@ -11,14 +12,14 @@
# #
# Detailed instructions for using the makefile: # Detailed instructions for using the makefile:
# #
# 1. Modify the line containg "INSTALL_DIR" to point to the directory that # 1. Modify the line containg "ARDUINO_INSTALL_DIR" to point to the directory that
# contains the Arduino installation (for example, under Mac OS X, this # contains the Arduino installation (for example, under Mac OS X, this
# might be /Applications/arduino-0012). # might be /Applications/arduino-0012).
# #
# 2. Modify the line containing "PORT" to refer to the filename # 2. Modify the line containing "UPLOAD_PORT" to refer to the filename
# representing the USB or serial connection to your Arduino board # representing the USB or serial connection to your Arduino board
# (e.g. PORT = /dev/tty.USB0). If the exact name of this file # (e.g. UPLOAD_PORT = /dev/tty.USB0). If the exact name of this file
# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*). # changes, you can use * as a wildcard (e.g. UPLOAD_PORT = /dev/tty.usb*).
# #
# 3. Set the line containing "MCU" to match your board's processor. # 3. Set the line containing "MCU" to match your board's processor.
# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth # Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
@ -32,43 +33,139 @@
# 5. Type "make upload", reset your Arduino board, and press enter to # 5. Type "make upload", reset your Arduino board, and press enter to
# upload your program to the Arduino board. # upload your program to the Arduino board.
# #
# $Id$ # Note that all settings are set with ?=, this means you can override them
# from the commandline with "make HARDWARE_MOTHERBOARD=71" for example
#For "old" Arduino Mega # This defined the board you are compiling for (see Configuration.h for the options)
#MCU = atmega1280 HARDWARE_MOTHERBOARD ?= 11
#For Arduino Mega2560
#MCU = atmega2560
#For Sanguinololu
MCU = atmega644p
# Here you select "arduino", "Sanguino", "Gen7", ... # Arduino source install directory, and version number
HARDWARE_VARIANT = Sanguino ARDUINO_INSTALL_DIR ?= ../../arduino-0022
# This defined the board you are compiling for ARDUINO_VERSION ?= 22
HARDWARE_MOTHERBOARD = 91
# Arduino source install directory # You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
INSTALL_DIR = ../../arduino-0022 AVR_TOOLS_PATH ?=
#Programmer configuration
UPLOAD_RATE ?= 115200
AVRDUDE_PROGRAMMER ?= arduino
UPLOAD_PORT ?= /dev/arduino
#Directory used to build files in, contains all the build files, from object files to the final hex file.
BUILD_DIR ?= applet
############################################################################
# Below here nothing should be changed...
# Here the Arduino variant is selected by the board type
# HARDWARE_VARIANT = "arduino", "Sanguino", "Gen7", ...
# MCU = "atmega1280", "Mega2560", "atmega2560", "atmega644p", ...
#Gen7
ifeq ($(HARDWARE_MOTHERBOARD),10)
HARDWARE_VARIANT ?= Gen7
MCU ?= atmega644
F_CPU ?= 20000000
else ifeq ($(HARDWARE_MOTHERBOARD),11)
HARDWARE_VARIANT ?= Gen7
MCU ?= atmega644p
F_CPU ?= 20000000
else ifeq ($(HARDWARE_MOTHERBOARD),12)
HARDWARE_VARIANT ?= Gen7
MCU ?= atmega644p
F_CPU ?= 20000000
else ifeq ($(HARDWARE_MOTHERBOARD),13)
HARDWARE_VARIANT ?= Gen7
MCU ?= atmega1284p
F_CPU ?= 20000000
#RAMPS
else ifeq ($(HARDWARE_MOTHERBOARD),3)
HARDWARE_VARIANT ?= arduino
MCU ?= atmega2560
else ifeq ($(HARDWARE_MOTHERBOARD),33)
HARDWARE_VARIANT ?= arduino
MCU ?= atmega2560
else ifeq ($(HARDWARE_MOTHERBOARD),34)
HARDWARE_VARIANT ?= arduino
MCU ?= atmega2560
#Duemilanove w/ ATMega328P pin assignment
else ifeq ($(HARDWARE_MOTHERBOARD),4)
HARDWARE_VARIANT ?= arduino
MCU ?= atmega328p
#Gen6
else ifeq ($(HARDWARE_MOTHERBOARD),5)
HARDWARE_VARIANT ?= Gen6
MCU ?= atmega664p
else ifeq ($(HARDWARE_MOTHERBOARD),51)
HARDWARE_VARIANT ?= Gen6
MCU ?= atmega664p
#Sanguinololu
else ifeq ($(HARDWARE_MOTHERBOARD),6)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
else ifeq ($(HARDWARE_MOTHERBOARD),62)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
else ifeq ($(HARDWARE_MOTHERBOARD),63)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
#Ultimaker
else ifeq ($(HARDWARE_MOTHERBOARD),7)
HARDWARE_VARIANT ?= arduino
MCU ?= atmega2560
else ifeq ($(HARDWARE_MOTHERBOARD),71)
HARDWARE_VARIANT ?= arduino
MCU ?= atmega1280
#Teensylu
else ifeq ($(HARDWARE_MOTHERBOARD),8)
HARDWARE_VARIANT ?= Teensyduino
MCU ?= at90usb1286
#Gen3+
else ifeq ($(HARDWARE_MOTHERBOARD),9)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega644p
#Megatronics
else ifeq ($(HARDWARE_MOTHERBOARD),70)
HARDWARE_VARIANT ?= arduino
MCU ?= atmega2560
#Alpha OMCA board
else ifeq ($(HARDWARE_MOTHERBOARD),90)
HARDWARE_VARIANT ?= SanguinoA
MCU ?= atmega644
#Final OMCA board
else ifeq ($(HARDWARE_MOTHERBOARD),91)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega644p
endif
# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
# if you are setting this to something other than 16MHz
# Set to 16Mhz if not yet set.
F_CPU ?= 16000000
# Arduino containd the main source code for the Arduino # Arduino containd the main source code for the Arduino
# Libraries, the "hardware variant" are for boards # Libraries, the "hardware variant" are for boards
# that derives from that, and their source are present in # that derives from that, and their source are present in
# the main Marlin source directory # the main Marlin source directory
ARDUINO = $(INSTALL_DIR)/hardware/arduino/cores/arduino ARDUINO = $(ARDUINO_INSTALL_DIR)/hardware/arduino/cores/arduino
ifeq (${HARDWARE_VARIANT}, arduino) ifeq (${HARDWARE_VARIANT}, arduino)
HARDWARE_SRC= $(ARDUINO) HARDWARE_SRC = $(ARDUINO)
else else
HARDWARE_SRC= $(HARDWARE_VARIANT)/cores/arduino HARDWARE_SRC = $(HARDWARE_VARIANT)/cores/arduino
endif endif
# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
# if you are setting this to something other than 16MHz
F_CPU = 16000000
UPLOAD_RATE = 115200
AVRDUDE_PROGRAMMER = arduino
PORT = /dev/arduino
TARGET = $(notdir $(CURDIR)) TARGET = $(notdir $(CURDIR))
# VPATH tells make to look into these directory for source files, # VPATH tells make to look into these directory for source files,
@ -76,20 +173,18 @@ TARGET = $(notdir $(CURDIR))
# directory is added here # directory is added here
VPATH = . VPATH = .
VPATH += applet VPATH += $(BUILD_DIR)
VPATH += $(HARDWARE_SRC) VPATH += $(HARDWARE_SRC)
VPATH += $(ARDUINO) VPATH += $(ARDUINO)
VPATH += $(INSTALL_DIR)/libraries/LiquidCrystal VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal
#TODO: Add the path to the hardware variant when using Arduino >= 100, and adjust the files required for compilation.
#VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/variants/mega
############################################################################ SRC = pins_arduino.c main.c wiring.c \
# Below here nothing should be changed...
AVR_TOOLS_PATH =
SRC = pins_arduino.c wiring.c \
wiring_analog.c wiring_digital.c \ wiring_analog.c wiring_digital.c \
wiring_pulse.c \ wiring_pulse.c \
wiring_shift.c WInterrupts.c wiring_shift.c WInterrupts.c
CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin.cpp Marlin_main.cpp \ CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin_main.cpp \
MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp \ MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp \
SdFile.cpp SdVolume.cpp motion_control.cpp planner.cpp \ SdFile.cpp SdVolume.cpp motion_control.cpp planner.cpp \
stepper.cpp temperature.cpp cardreader.cpp ConfigurationStore.cpp stepper.cpp temperature.cpp cardreader.cpp ConfigurationStore.cpp
@ -125,8 +220,8 @@ CDEBUG = -g$(DEBUG)
CWARN = -Wall -Wstrict-prototypes CWARN = -Wall -Wstrict-prototypes
CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct \ CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct \
-fshort-enums -w -ffunction-sections -fdata-sections \ -fshort-enums -w -ffunction-sections -fdata-sections \
-DARDUINO=22 -DARDUINO=$(ARDUINO_VERSION)
ifneq (${HARDWARE_MOTHERBOARD},) ifneq ($(HARDWARE_MOTHERBOARD),)
CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD} CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
endif endif
#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) #CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
@ -138,9 +233,9 @@ LDFLAGS = -lm
# Programming support using avrdude. Settings and variables. # Programming support using avrdude. Settings and variables.
AVRDUDE_PORT = $(PORT) AVRDUDE_PORT = $(UPLOAD_PORT)
AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex:i AVRDUDE_WRITE_FLASH = -U flash:w:$(BUILD_DIR)/$(TARGET).hex:i
AVRDUDE_FLAGS = -D -C $(INSTALL_DIR)/hardware/tools/avrdude.conf \ AVRDUDE_FLAGS = -D -C $(ARDUINO_INSTALL_DIR)/hardware/tools/avrdude.conf \
-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
-b $(UPLOAD_RATE) -b $(UPLOAD_RATE)
@ -157,9 +252,9 @@ REMOVE = rm -f
MV = mv -f MV = mv -f
# Define all object files. # Define all object files.
OBJ = ${patsubst %.c, applet/%.o, ${SRC}} OBJ = ${patsubst %.c, $(BUILD_DIR)/%.o, ${SRC}}
OBJ += ${patsubst %.cpp, applet/%.o, ${CXXSRC}} OBJ += ${patsubst %.cpp, $(BUILD_DIR)/%.o, ${CXXSRC}}
OBJ += ${patsubst %.S, applet/%.o, ${ASRC}} OBJ += ${patsubst %.S, $(BUILD_DIR)/%.o, ${ASRC}}
# Define all listing files. # Define all listing files.
LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
@ -182,52 +277,38 @@ endif
# Default target. # Default target.
all: sizeafter all: sizeafter
build: applet elf hex build: $(BUILD_DIR) elf hex
# Creates the object directory # Creates the object directory
applet: $(BUILD_DIR):
$P mkdir -p applet $P mkdir -p $(BUILD_DIR)
# the .cpp for Marlin depends on the .pde elf: $(BUILD_DIR)/$(TARGET).elf
#applet/$(TARGET).cpp: $(TARGET).pde hex: $(BUILD_DIR)/$(TARGET).hex
# ..and the .o depends from the .cpp eep: $(BUILD_DIR)/$(TARGET).eep
#applet/%.o: applet/%.cpp lss: $(BUILD_DIR)/$(TARGET).lss
sym: $(BUILD_DIR)/$(TARGET).sym
applet/%.cpp: %.pde $(MAKEFILE)
# Here is the "preprocessing".
# It creates a .cpp file based with the same name as the .pde file.
# On top of the new .cpp file comes the WProgram.h header.
$(Pecho) " WR $@"
$P echo '#include "WProgram.h"' > $@
$P echo '#include "$<"' >>$@
$P echo '#include "$(ARDUINO)/main.cpp"' >> $@
elf: applet/$(TARGET).elf
hex: applet/$(TARGET).hex
eep: applet/$(TARGET).eep
lss: applet/$(TARGET).lss
sym: applet/$(TARGET).sym
# Program the device. # Program the device.
# Do not try to reset an arduino if it's not one # Do not try to reset an arduino if it's not one
upload: applet/$(TARGET).hex upload: $(BUILD_DIR)/$(TARGET).hex
ifeq (${AVRDUDE_PROGRAMMER}, arduino) ifeq (${AVRDUDE_PROGRAMMER}, arduino)
stty hup < $(PORT); true stty hup < $(UPLOAD_PORT); true
endif endif
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
ifeq (${AVRDUDE_PROGRAMMER}, arduino) ifeq (${AVRDUDE_PROGRAMMER}, arduino)
stty -hup < $(PORT); true stty -hup < $(UPLOAD_PORT); true
endif endif
# Display size of file. # Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
ELFSIZE = $(SIZE) --mcu=$(MCU) -C applet/$(TARGET).elf; \ ELFSIZE = $(SIZE) --mcu=$(MCU) -C $(BUILD_DIR)/$(TARGET).elf; \
$(SIZE) applet/$(TARGET).elf $(SIZE) $(BUILD_DIR)/$(TARGET).elf
sizebefore: sizebefore:
$P if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi $P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
sizeafter: build sizeafter: build
$P if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi $P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
@ -238,12 +319,12 @@ COFFCONVERT=$(OBJCOPY) --debugging \
--change-section-address .eeprom-0x810000 --change-section-address .eeprom-0x810000
coff: applet/$(TARGET).elf coff: $(BUILD_DIR)/$(TARGET).elf
$(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof $(COFFCONVERT) -O coff-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
extcoff: $(TARGET).elf extcoff: $(TARGET).elf
$(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof $(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
.SUFFIXES: .elf .hex .eep .lss .sym .SUFFIXES: .elf .hex .eep .lss .sym
@ -266,37 +347,34 @@ extcoff: $(TARGET).elf
$(NM) -n $< > $@ $(NM) -n $< > $@
# Link: create ELF output file from library. # Link: create ELF output file from library.
applet/$(TARGET).elf: applet/$(TARGET).cpp applet/core.a Configuration.h $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
$(Pecho) " CXX $@" $(Pecho) " CXX $@"
$P $(CC) $(ALL_CXXFLAGS) -Wl,--gc-sections -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS) $P $(CC) $(ALL_CXXFLAGS) -Wl,--gc-sections -o $@ -L. $(OBJ) $(LDFLAGS)
applet/core.a: $(OBJ) $(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
$P for i in $(OBJ); do echo " AR $$i"; $(AR) rcs applet/core.a $$i; done
applet/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
$(Pecho) " CC $@" $(Pecho) " CC $@"
$P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@ $P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@
applet/%.o: applet/%.cpp Configuration.h Configuration_adv.h $(MAKEFILE) $(BUILD_DIR)/%.o: $(BUILD_DIR)/%.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
$(Pecho) " CXX $@" $(Pecho) " CXX $@"
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@ $P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
applet/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE) $(BUILD_DIR)/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
$(Pecho) " CXX $@" $(Pecho) " CXX $@"
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@ $P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
# Target: clean project. # Target: clean project.
clean: clean:
$(Pecho) " RM applet/*" $(Pecho) " RM $(BUILD_DIR)/*"
$P $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \ $P $(REMOVE) $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET).cof $(BUILD_DIR)/$(TARGET).elf \
applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp applet/core.a \ $(BUILD_DIR)/$(TARGET).map $(BUILD_DIR)/$(TARGET).sym $(BUILD_DIR)/$(TARGET).lss $(BUILD_DIR)/$(TARGET).cpp \
$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
$(Pecho) " RMDIR applet/" $(Pecho) " RMDIR $(BUILD_DIR)/"
$P rm -rf applet $P rm -rf $(BUILD_DIR)
.PHONY: all build elf hex eep lss sym program coff extcoff clean depend applet_files sizebefore sizeafter .PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
# Automaticaly include the dependency files created by gcc # Automaticaly include the dependency files created by gcc
-include ${wildcard applet/*.d} -include ${wildcard $(BUILD_DIR)/*.d}