Update on makefile, should make it easier to compile for different boards without changing the makefile. (Still missing Arduino 1.x.x support).
This commit is contained in:
daid303
parent
40ce057a3e
commit
789be03b4f
258
Marlin/Makefile
258
Marlin/Makefile
@ -3,6 +3,7 @@
|
||||
# Makefile Based on:
|
||||
# Arduino 0011 Makefile
|
||||
# Arduino adaptation by mellis, eighthave, oli.keller
|
||||
# Marlin adaption by Daid
|
||||
#
|
||||
# This has been tested with Arduino 0022.
|
||||
#
|
||||
@ -11,14 +12,14 @@
|
||||
#
|
||||
# Detailed instructions for using the makefile:
|
||||
#
|
||||
# 1. Modify the line containg "INSTALL_DIR" to point to the directory that
|
||||
# 1. Modify the line containg "ARDUINO_INSTALL_DIR" to point to the directory that
|
||||
# contains the Arduino installation (for example, under Mac OS X, this
|
||||
# might be /Applications/arduino-0012).
|
||||
#
|
||||
# 2. Modify the line containing "PORT" to refer to the filename
|
||||
# 2. Modify the line containing "UPLOAD_PORT" to refer to the filename
|
||||
# representing the USB or serial connection to your Arduino board
|
||||
# (e.g. PORT = /dev/tty.USB0). If the exact name of this file
|
||||
# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*).
|
||||
# (e.g. UPLOAD_PORT = /dev/tty.USB0). If the exact name of this file
|
||||
# changes, you can use * as a wildcard (e.g. UPLOAD_PORT = /dev/tty.usb*).
|
||||
#
|
||||
# 3. Set the line containing "MCU" to match your board's processor.
|
||||
# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
|
||||
@ -32,28 +33,132 @@
|
||||
# 5. Type "make upload", reset your Arduino board, and press enter to
|
||||
# upload your program to the Arduino board.
|
||||
#
|
||||
# $Id$
|
||||
# Note that all settings are set with ?=, this means you can override them
|
||||
# from the commandline with "make HARDWARE_MOTHERBOARD=71" for example
|
||||
|
||||
#For "old" Arduino Mega
|
||||
#MCU = atmega1280
|
||||
#For Arduino Mega2560
|
||||
#MCU = atmega2560
|
||||
#For Sanguinololu
|
||||
MCU = atmega644p
|
||||
# This defined the board you are compiling for (see Configuration.h for the options)
|
||||
HARDWARE_MOTHERBOARD ?= 11
|
||||
|
||||
# Here you select "arduino", "Sanguino", "Gen7", ...
|
||||
HARDWARE_VARIANT = Sanguino
|
||||
# This defined the board you are compiling for
|
||||
HARDWARE_MOTHERBOARD = 91
|
||||
# Arduino source install directory, and version number
|
||||
ARDUINO_INSTALL_DIR ?= ../../arduino-0022
|
||||
ARDUINO_VERSION ?= 22
|
||||
|
||||
# Arduino source install directory
|
||||
INSTALL_DIR = ../../arduino-0022
|
||||
# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
|
||||
AVR_TOOLS_PATH ?=
|
||||
|
||||
#Programmer configuration
|
||||
UPLOAD_RATE ?= 115200
|
||||
AVRDUDE_PROGRAMMER ?= arduino
|
||||
UPLOAD_PORT ?= /dev/arduino
|
||||
|
||||
#Directory used to build files in, contains all the build files, from object files to the final hex file.
|
||||
BUILD_DIR ?= applet
|
||||
|
||||
############################################################################
|
||||
# Below here nothing should be changed...
|
||||
|
||||
# Here the Arduino variant is selected by the board type
|
||||
# HARDWARE_VARIANT = "arduino", "Sanguino", "Gen7", ...
|
||||
# MCU = "atmega1280", "Mega2560", "atmega2560", "atmega644p", ...
|
||||
|
||||
#Gen7
|
||||
ifeq ($(HARDWARE_MOTHERBOARD),10)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644
|
||||
F_CPU ?= 20000000
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),11)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644p
|
||||
F_CPU ?= 20000000
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),12)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644p
|
||||
F_CPU ?= 20000000
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),13)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega1284p
|
||||
F_CPU ?= 20000000
|
||||
|
||||
#RAMPS
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),3)
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega2560
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),33)
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega2560
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),34)
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega2560
|
||||
|
||||
#Duemilanove w/ ATMega328P pin assignment
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),4)
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega328p
|
||||
|
||||
#Gen6
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),5)
|
||||
HARDWARE_VARIANT ?= Gen6
|
||||
MCU ?= atmega664p
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),51)
|
||||
HARDWARE_VARIANT ?= Gen6
|
||||
MCU ?= atmega664p
|
||||
|
||||
#Sanguinololu
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),6)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),62)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),63)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
|
||||
#Ultimaker
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),7)
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega2560
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),71)
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega1280
|
||||
|
||||
#Teensylu
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),8)
|
||||
HARDWARE_VARIANT ?= Teensyduino
|
||||
MCU ?= at90usb1286
|
||||
|
||||
#Gen3+
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),9)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
|
||||
#Megatronics
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),70)
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega2560
|
||||
|
||||
#Alpha OMCA board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),90)
|
||||
HARDWARE_VARIANT ?= SanguinoA
|
||||
MCU ?= atmega644
|
||||
|
||||
#Final OMCA board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),91)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
|
||||
endif
|
||||
|
||||
# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
|
||||
# if you are setting this to something other than 16MHz
|
||||
# Set to 16Mhz if not yet set.
|
||||
F_CPU ?= 16000000
|
||||
|
||||
# Arduino containd the main source code for the Arduino
|
||||
# Libraries, the "hardware variant" are for boards
|
||||
# that derives from that, and their source are present in
|
||||
# the main Marlin source directory
|
||||
ARDUINO = $(INSTALL_DIR)/hardware/arduino/cores/arduino
|
||||
ARDUINO = $(ARDUINO_INSTALL_DIR)/hardware/arduino/cores/arduino
|
||||
|
||||
ifeq (${HARDWARE_VARIANT}, arduino)
|
||||
HARDWARE_SRC = $(ARDUINO)
|
||||
@ -61,14 +166,6 @@ else
|
||||
HARDWARE_SRC = $(HARDWARE_VARIANT)/cores/arduino
|
||||
endif
|
||||
|
||||
# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
|
||||
# if you are setting this to something other than 16MHz
|
||||
F_CPU = 16000000
|
||||
|
||||
UPLOAD_RATE = 115200
|
||||
AVRDUDE_PROGRAMMER = arduino
|
||||
PORT = /dev/arduino
|
||||
|
||||
TARGET = $(notdir $(CURDIR))
|
||||
|
||||
# VPATH tells make to look into these directory for source files,
|
||||
@ -76,20 +173,18 @@ TARGET = $(notdir $(CURDIR))
|
||||
# directory is added here
|
||||
|
||||
VPATH = .
|
||||
VPATH += applet
|
||||
VPATH += $(BUILD_DIR)
|
||||
VPATH += $(HARDWARE_SRC)
|
||||
VPATH += $(ARDUINO)
|
||||
VPATH += $(INSTALL_DIR)/libraries/LiquidCrystal
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal
|
||||
#TODO: Add the path to the hardware variant when using Arduino >= 100, and adjust the files required for compilation.
|
||||
#VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/variants/mega
|
||||
|
||||
############################################################################
|
||||
# Below here nothing should be changed...
|
||||
|
||||
AVR_TOOLS_PATH =
|
||||
SRC = pins_arduino.c wiring.c \
|
||||
SRC = pins_arduino.c main.c wiring.c \
|
||||
wiring_analog.c wiring_digital.c \
|
||||
wiring_pulse.c \
|
||||
wiring_shift.c WInterrupts.c
|
||||
CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin.cpp Marlin_main.cpp \
|
||||
CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin_main.cpp \
|
||||
MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp \
|
||||
SdFile.cpp SdVolume.cpp motion_control.cpp planner.cpp \
|
||||
stepper.cpp temperature.cpp cardreader.cpp ConfigurationStore.cpp
|
||||
@ -125,8 +220,8 @@ CDEBUG = -g$(DEBUG)
|
||||
CWARN = -Wall -Wstrict-prototypes
|
||||
CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct \
|
||||
-fshort-enums -w -ffunction-sections -fdata-sections \
|
||||
-DARDUINO=22
|
||||
ifneq (${HARDWARE_MOTHERBOARD},)
|
||||
-DARDUINO=$(ARDUINO_VERSION)
|
||||
ifneq ($(HARDWARE_MOTHERBOARD),)
|
||||
CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
|
||||
endif
|
||||
#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
|
||||
@ -138,9 +233,9 @@ LDFLAGS = -lm
|
||||
|
||||
|
||||
# Programming support using avrdude. Settings and variables.
|
||||
AVRDUDE_PORT = $(PORT)
|
||||
AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex:i
|
||||
AVRDUDE_FLAGS = -D -C $(INSTALL_DIR)/hardware/tools/avrdude.conf \
|
||||
AVRDUDE_PORT = $(UPLOAD_PORT)
|
||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(BUILD_DIR)/$(TARGET).hex:i
|
||||
AVRDUDE_FLAGS = -D -C $(ARDUINO_INSTALL_DIR)/hardware/tools/avrdude.conf \
|
||||
-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
|
||||
-b $(UPLOAD_RATE)
|
||||
|
||||
@ -157,9 +252,9 @@ REMOVE = rm -f
|
||||
MV = mv -f
|
||||
|
||||
# Define all object files.
|
||||
OBJ = ${patsubst %.c, applet/%.o, ${SRC}}
|
||||
OBJ += ${patsubst %.cpp, applet/%.o, ${CXXSRC}}
|
||||
OBJ += ${patsubst %.S, applet/%.o, ${ASRC}}
|
||||
OBJ = ${patsubst %.c, $(BUILD_DIR)/%.o, ${SRC}}
|
||||
OBJ += ${patsubst %.cpp, $(BUILD_DIR)/%.o, ${CXXSRC}}
|
||||
OBJ += ${patsubst %.S, $(BUILD_DIR)/%.o, ${ASRC}}
|
||||
|
||||
# Define all listing files.
|
||||
LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
|
||||
@ -182,52 +277,38 @@ endif
|
||||
# Default target.
|
||||
all: sizeafter
|
||||
|
||||
build: applet elf hex
|
||||
build: $(BUILD_DIR) elf hex
|
||||
|
||||
# Creates the object directory
|
||||
applet:
|
||||
$P mkdir -p applet
|
||||
$(BUILD_DIR):
|
||||
$P mkdir -p $(BUILD_DIR)
|
||||
|
||||
# the .cpp for Marlin depends on the .pde
|
||||
#applet/$(TARGET).cpp: $(TARGET).pde
|
||||
# ..and the .o depends from the .cpp
|
||||
#applet/%.o: applet/%.cpp
|
||||
|
||||
applet/%.cpp: %.pde $(MAKEFILE)
|
||||
# Here is the "preprocessing".
|
||||
# It creates a .cpp file based with the same name as the .pde file.
|
||||
# On top of the new .cpp file comes the WProgram.h header.
|
||||
$(Pecho) " WR $@"
|
||||
$P echo '#include "WProgram.h"' > $@
|
||||
$P echo '#include "$<"' >>$@
|
||||
$P echo '#include "$(ARDUINO)/main.cpp"' >> $@
|
||||
|
||||
elf: applet/$(TARGET).elf
|
||||
hex: applet/$(TARGET).hex
|
||||
eep: applet/$(TARGET).eep
|
||||
lss: applet/$(TARGET).lss
|
||||
sym: applet/$(TARGET).sym
|
||||
elf: $(BUILD_DIR)/$(TARGET).elf
|
||||
hex: $(BUILD_DIR)/$(TARGET).hex
|
||||
eep: $(BUILD_DIR)/$(TARGET).eep
|
||||
lss: $(BUILD_DIR)/$(TARGET).lss
|
||||
sym: $(BUILD_DIR)/$(TARGET).sym
|
||||
|
||||
# Program the device.
|
||||
# Do not try to reset an arduino if it's not one
|
||||
upload: applet/$(TARGET).hex
|
||||
upload: $(BUILD_DIR)/$(TARGET).hex
|
||||
ifeq (${AVRDUDE_PROGRAMMER}, arduino)
|
||||
stty hup < $(PORT); true
|
||||
stty hup < $(UPLOAD_PORT); true
|
||||
endif
|
||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
|
||||
ifeq (${AVRDUDE_PROGRAMMER}, arduino)
|
||||
stty -hup < $(PORT); true
|
||||
stty -hup < $(UPLOAD_PORT); true
|
||||
endif
|
||||
|
||||
# Display size of file.
|
||||
HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex
|
||||
ELFSIZE = $(SIZE) --mcu=$(MCU) -C applet/$(TARGET).elf; \
|
||||
$(SIZE) applet/$(TARGET).elf
|
||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
|
||||
ELFSIZE = $(SIZE) --mcu=$(MCU) -C $(BUILD_DIR)/$(TARGET).elf; \
|
||||
$(SIZE) $(BUILD_DIR)/$(TARGET).elf
|
||||
sizebefore:
|
||||
$P if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
|
||||
$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
|
||||
|
||||
sizeafter: build
|
||||
$P if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
|
||||
$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
|
||||
|
||||
|
||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
||||
@ -238,12 +319,12 @@ COFFCONVERT=$(OBJCOPY) --debugging \
|
||||
--change-section-address .eeprom-0x810000
|
||||
|
||||
|
||||
coff: applet/$(TARGET).elf
|
||||
$(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof
|
||||
coff: $(BUILD_DIR)/$(TARGET).elf
|
||||
$(COFFCONVERT) -O coff-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
|
||||
|
||||
|
||||
extcoff: $(TARGET).elf
|
||||
$(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof
|
||||
$(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
|
||||
|
||||
|
||||
.SUFFIXES: .elf .hex .eep .lss .sym
|
||||
@ -266,37 +347,34 @@ extcoff: $(TARGET).elf
|
||||
$(NM) -n $< > $@
|
||||
|
||||
# Link: create ELF output file from library.
|
||||
applet/$(TARGET).elf: applet/$(TARGET).cpp applet/core.a Configuration.h
|
||||
$(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
|
||||
$(Pecho) " CXX $@"
|
||||
$P $(CC) $(ALL_CXXFLAGS) -Wl,--gc-sections -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS)
|
||||
$P $(CC) $(ALL_CXXFLAGS) -Wl,--gc-sections -o $@ -L. $(OBJ) $(LDFLAGS)
|
||||
|
||||
applet/core.a: $(OBJ)
|
||||
$P for i in $(OBJ); do echo " AR $$i"; $(AR) rcs applet/core.a $$i; done
|
||||
|
||||
applet/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CC $@"
|
||||
$P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
applet/%.o: applet/%.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(BUILD_DIR)/%.o: $(BUILD_DIR)/%.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CXX $@"
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
|
||||
|
||||
applet/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(BUILD_DIR)/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CXX $@"
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Target: clean project.
|
||||
clean:
|
||||
$(Pecho) " RM applet/*"
|
||||
$P $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \
|
||||
applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp applet/core.a \
|
||||
$(Pecho) " RM $(BUILD_DIR)/*"
|
||||
$P $(REMOVE) $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET).cof $(BUILD_DIR)/$(TARGET).elf \
|
||||
$(BUILD_DIR)/$(TARGET).map $(BUILD_DIR)/$(TARGET).sym $(BUILD_DIR)/$(TARGET).lss $(BUILD_DIR)/$(TARGET).cpp \
|
||||
$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
|
||||
$(Pecho) " RMDIR applet/"
|
||||
$P rm -rf applet
|
||||
$(Pecho) " RMDIR $(BUILD_DIR)/"
|
||||
$P rm -rf $(BUILD_DIR)
|
||||
|
||||
|
||||
.PHONY: all build elf hex eep lss sym program coff extcoff clean depend applet_files sizebefore sizeafter
|
||||
.PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
|
||||
|
||||
# Automaticaly include the dependency files created by gcc
|
||||
-include ${wildcard applet/*.d}
|
||||
-include ${wildcard $(BUILD_DIR)/*.d}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user