From 7e802145cc4f316c8ec0a86f280b9b54360801c9 Mon Sep 17 00:00:00 2001 From: Michael Triffon <36581178+ModMike@users.noreply.github.com> Date: Fri, 22 Jun 2018 00:08:17 -0400 Subject: [PATCH] [2.0.x] Add CR-10 stock display support for Re-Arm (EXP3) (#11068) --- Marlin/src/pins/pins_RAMPS_RE_ARM.h | 139 ++++++++++++++++------------ 1 file changed, 80 insertions(+), 59 deletions(-) diff --git a/Marlin/src/pins/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/pins_RAMPS_RE_ARM.h index 6f41d4c96..2c69580b0 100644 --- a/Marlin/src/pins/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/pins_RAMPS_RE_ARM.h @@ -257,47 +257,26 @@ #if ENABLED(ULTRA_LCD) - #define BEEPER_PIN P1_30 // (37) not 5V tolerant + #if ENABLED(CR10_STOCKDISPLAY) - #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 - #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 - #define BTN_ENC P2_11 // (35) J3-3 & AUX-4 + // Re-Arm can support Creality stock display without SD card reader and single cable on EXP3. + // Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one + // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3. + // Requires REVERSE_ENCODER_DIRECTION in Configuration.h - #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 - #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 - #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 - #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 - #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers - #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 - #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 + #define BEEPER_PIN P2_11 // J3-3 & AUX-4 - #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 - #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 + #define BTN_EN1 P0_16 // J3-7 & AUX-4 + #define BTN_EN2 P1_23 // J3-5 & AUX-4 + #define BTN_ENC P3_25 // J3-4 & AUX-4 - #ifdef ULTIPANEL - #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO - #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER - #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 - #endif + #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS) + #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) + #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) - #if ENABLED(NEWPANEL) - #if ENABLED(REPRAPWORLD_KEYPAD) - #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 - #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 - #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3 - #endif #else - //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 - //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 - //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 - //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 - #endif - #if ENABLED(VIKI2) || ENABLED(miniVIKI) - // #define LCD_SCREEN_ROT_180 - - #undef BEEPER_PIN - #define BEEPER_PIN P1_30 // (37) may change if cable changes + #define BEEPER_PIN P1_30 // (37) not 5V tolerant #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 @@ -305,36 +284,78 @@ #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 + #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 + #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 + #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers + #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 - #undef DOGLCD_CS - #define DOGLCD_CS P0_16 // (16) - #undef LCD_BACKLIGHT_PIN //P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers - #undef LCD_PINS_ENABLE //P0_18 // (51) (MOSI) J3-10 & AUX-3 - #undef LCD_PINS_D4 //P0_15 // (52) (SCK) J3-9 & AUX-3 - - #undef LCD_PINS_D5 //P2_06 // (59) J3-8 & AUX-2 #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 - #undef LCD_PINS_D6 //P0_26 // (63) J5-3 & AUX-2 - #undef LCD_PINS_D7 //P1_21 // ( 6) (SERVO1) J5-1 & SERVO connector - #define DOGLCD_SCK SCK_PIN - #define DOGLCD_MOSI MOSI_PIN + #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 - #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes - #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes - #endif + #ifdef ULTIPANEL + #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO + #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER + #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 + #endif - //#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 - //#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 - //#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 - //#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS + #if ENABLED(NEWPANEL) + #if ENABLED(REPRAPWORLD_KEYPAD) + #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 + #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3 + #endif + #else + //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 + //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 + //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 + //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 + #endif + + #if ENABLED(VIKI2) || ENABLED(miniVIKI) + // #define LCD_SCREEN_ROT_180 + + #undef BEEPER_PIN + #define BEEPER_PIN P1_30 // (37) may change if cable changes + + #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 + #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 + #define BTN_ENC P2_11 // (35) J3-3 & AUX-4 + + #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 + #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 + + #undef DOGLCD_CS + #define DOGLCD_CS P0_16 // (16) + #undef LCD_BACKLIGHT_PIN //P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers + #undef LCD_PINS_ENABLE //P0_18 // (51) (MOSI) J3-10 & AUX-3 + #undef LCD_PINS_D4 //P0_15 // (52) (SCK) J3-9 & AUX-3 + + #undef LCD_PINS_D5 //P2_06 // (59) J3-8 & AUX-2 + #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 + #undef LCD_PINS_D6 //P0_26 // (63) J5-3 & AUX-2 + #undef LCD_PINS_D7 //P1_21 // ( 6) (SERVO1) J5-1 & SERVO connector + #define DOGLCD_SCK SCK_PIN + #define DOGLCD_MOSI MOSI_PIN + + #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes + #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes + #endif + + //#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 + //#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 + //#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 + //#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS + + #if ENABLED(MINIPANEL) + // GLCD features + //#define LCD_CONTRAST 190 + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + #endif - #if ENABLED(MINIPANEL) - // GLCD features - //#define LCD_CONTRAST 190 - // Uncomment screen orientation - //#define LCD_SCREEN_ROT_90 - //#define LCD_SCREEN_ROT_180 - //#define LCD_SCREEN_ROT_270 #endif #endif // ULTRA_LCD