diff --git a/Marlin/src/feature/fwretract.cpp b/Marlin/src/feature/fwretract.cpp
index 2a71af11d..4e57ba015 100644
--- a/Marlin/src/feature/fwretract.cpp
+++ b/Marlin/src/feature/fwretract.cpp
@@ -36,6 +36,8 @@ FWRetract fwretract; // Single instance - this calls the constructor
 #include "../module/planner.h"
 #include "../module/stepper.h"
 
+#include "../gcode/parser.h"
+
 #if ENABLED(RETRACT_SYNC_MIXING)
   #include "mixing.h"
 #endif
@@ -198,4 +200,78 @@ void FWRetract::retract(const bool retracting
   //*/
 }
 
+//extern const char SP_Z_STR[];
+
+/**
+ * M207: Set firmware retraction values
+ *
+ *   S[+units]    retract_length
+ *   W[+units]    swap_retract_length (multi-extruder)
+ *   F[units/min] retract_feedrate_mm_s
+ *   Z[units]     retract_zraise
+ */
+void FWRetract::M207() {
+  if (!parser.seen("FSWZ")) return M207_report();
+  if (parser.seen('S')) settings.retract_length = parser.value_axis_units(E_AXIS);
+  if (parser.seen('F')) settings.retract_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS));
+  if (parser.seen('Z')) settings.retract_zraise = parser.value_linear_units();
+  if (parser.seen('W')) settings.swap_retract_length = parser.value_axis_units(E_AXIS);
+}
+
+void FWRetract::M207_report(const bool forReplay/*=false*/) {
+  if (!forReplay) { SERIAL_ECHO_MSG("; Retract: S<length> F<units/m> Z<lift>"); SERIAL_ECHO_START(); }
+  SERIAL_ECHOLNPAIR_P(
+      PSTR("  M207 S"), LINEAR_UNIT(settings.retract_length)
+    , PSTR(" W"), LINEAR_UNIT(settings.swap_retract_length)
+    , PSTR(" F"), LINEAR_UNIT(MMS_TO_MMM(settings.retract_feedrate_mm_s))
+    , SP_Z_STR, LINEAR_UNIT(settings.retract_zraise)
+  );
+}
+
+/**
+ * M208: Set firmware un-retraction values
+ *
+ *   S[+units]    retract_recover_extra (in addition to M207 S*)
+ *   W[+units]    swap_retract_recover_extra (multi-extruder)
+ *   F[units/min] retract_recover_feedrate_mm_s
+ *   R[units/min] swap_retract_recover_feedrate_mm_s
+ */
+void FWRetract::M208() {
+  if (!parser.seen("FSRW")) return M208_report();
+  if (parser.seen('S')) settings.retract_recover_extra = parser.value_axis_units(E_AXIS);
+  if (parser.seen('F')) settings.retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS));
+  if (parser.seen('R')) settings.swap_retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS));
+  if (parser.seen('W')) settings.swap_retract_recover_extra = parser.value_axis_units(E_AXIS);
+}
+
+void FWRetract::M208_report(const bool forReplay/*=false*/) {
+  if (!forReplay) { SERIAL_ECHO_MSG("; Recover: S<length> F<units/m>"); SERIAL_ECHO_START(); }
+  SERIAL_ECHOLNPAIR(
+      "  M208 S", LINEAR_UNIT(settings.retract_recover_extra)
+    , " W", LINEAR_UNIT(settings.swap_retract_recover_extra)
+    , " F", LINEAR_UNIT(MMS_TO_MMM(settings.retract_recover_feedrate_mm_s))
+  );
+}
+
+#if ENABLED(FWRETRACT_AUTORETRACT)
+
+  /**
+   * M209: Enable automatic retract (M209 S1)
+   *   For slicers that don't support G10/11, reversed extrude-only
+   *   moves will be classified as retraction.
+   */
+  void FWRetract::M209() {
+    if (!parser.seen('S')) return M209_report();
+    if (MIN_AUTORETRACT <= MAX_AUTORETRACT)
+      enable_autoretract(parser.value_bool());
+  }
+
+  void FWRetract::M209_report(const bool forReplay/*=false*/) {
+    if (!forReplay) { SERIAL_ECHO_MSG("; Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover"); SERIAL_ECHO_START(); }
+    SERIAL_ECHOLNPAIR("  M209 S", autoretract_enabled);
+  }
+
+#endif // FWRETRACT_AUTORETRACT
+
+
 #endif // FWRETRACT
diff --git a/Marlin/src/feature/fwretract.h b/Marlin/src/feature/fwretract.h
index 134851965..4fa64ad83 100644
--- a/Marlin/src/feature/fwretract.h
+++ b/Marlin/src/feature/fwretract.h
@@ -79,6 +79,15 @@ public:
       , bool swapping = false
     #endif
   );
+
+  static void M207();
+  static void M207_report(const bool forReplay=false);
+  static void M208();
+  static void M208_report(const bool forReplay=false);
+  #if ENABLED(FWRETRACT_AUTORETRACT)
+    static void M209();
+    static void M209_report(const bool forReplay=false);
+  #endif
 };
 
 extern FWRetract fwretract;
diff --git a/Marlin/src/gcode/feature/fwretract/M207-M209.cpp b/Marlin/src/gcode/feature/fwretract/M207-M209.cpp
index 538f16cde..5793d73f9 100644
--- a/Marlin/src/gcode/feature/fwretract/M207-M209.cpp
+++ b/Marlin/src/gcode/feature/fwretract/M207-M209.cpp
@@ -29,46 +29,24 @@
 
 /**
  * M207: Set firmware retraction values
- *
- *   S[+units]    retract_length
- *   W[+units]    swap_retract_length (multi-extruder)
- *   F[units/min] retract_feedrate_mm_s
- *   Z[units]     retract_zraise
  */
-void GcodeSuite::M207() {
-  if (parser.seen('S')) fwretract.settings.retract_length = parser.value_axis_units(E_AXIS);
-  if (parser.seen('F')) fwretract.settings.retract_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS));
-  if (parser.seen('Z')) fwretract.settings.retract_zraise = parser.value_linear_units();
-  if (parser.seen('W')) fwretract.settings.swap_retract_length = parser.value_axis_units(E_AXIS);
-}
+void GcodeSuite::M207() { fwretract.M207(); }
 
 /**
  * M208: Set firmware un-retraction values
- *
- *   S[+units]    retract_recover_extra (in addition to M207 S*)
- *   W[+units]    swap_retract_recover_extra (multi-extruder)
- *   F[units/min] retract_recover_feedrate_mm_s
- *   R[units/min] swap_retract_recover_feedrate_mm_s
  */
-void GcodeSuite::M208() {
-  if (parser.seen('S')) fwretract.settings.retract_recover_extra = parser.value_axis_units(E_AXIS);
-  if (parser.seen('F')) fwretract.settings.retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS));
-  if (parser.seen('R')) fwretract.settings.swap_retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS));
-  if (parser.seen('W')) fwretract.settings.swap_retract_recover_extra = parser.value_axis_units(E_AXIS);
-}
+void GcodeSuite::M208() { fwretract.M208(); }
 
 #if ENABLED(FWRETRACT_AUTORETRACT)
 
   /**
    * M209: Enable automatic retract (M209 S1)
-   *   For slicers that don't support G10/11, reversed extrude-only
-   *   moves will be classified as retraction.
+   *
+   *   For slicers that don't support G10/11, reversed
+   *   extruder-only moves can be classified as retraction.
    */
-  void GcodeSuite::M209() {
-    if (MIN_AUTORETRACT <= MAX_AUTORETRACT && parser.seen('S'))
-      fwretract.enable_autoretract(parser.value_bool());
-  }
+  void GcodeSuite::M209() { fwretract.M209(); }
 
-#endif // FWRETRACT_AUTORETRACT
+#endif
 
 #endif // FWRETRACT
diff --git a/Marlin/src/gcode/geometry/M206_M428.cpp b/Marlin/src/gcode/geometry/M206_M428.cpp
index 2a2cdb16f..ac2420fcc 100644
--- a/Marlin/src/gcode/geometry/M206_M428.cpp
+++ b/Marlin/src/gcode/geometry/M206_M428.cpp
@@ -30,7 +30,7 @@
 #include "../../libs/buzzer.h"
 #include "../../MarlinCore.h"
 
-void m206_report() {
+void M206_report() {
   SERIAL_ECHOLNPAIR_P(PSTR("M206 X"), home_offset.x, SP_Y_STR, home_offset.y, SP_Z_STR, home_offset.z);
 }
 
@@ -52,7 +52,7 @@ void GcodeSuite::M206() {
   #endif
 
   if (!parser.seen("XYZ"))
-    m206_report();
+    M206_report();
   else
     report_current_position();
 }
diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp
index c82ed0eb8..d38ad5193 100644
--- a/Marlin/src/module/settings.cpp
+++ b/Marlin/src/module/settings.cpp
@@ -3466,29 +3466,10 @@ void MarlinSettings::reset() {
     #endif
 
     #if ENABLED(FWRETRACT)
-
-      CONFIG_ECHO_HEADING("Retract: S<length> F<units/m> Z<lift>");
-      CONFIG_ECHO_START();
-      SERIAL_ECHOLNPAIR_P(
-          PSTR("  M207 S"), LINEAR_UNIT(fwretract.settings.retract_length)
-        , PSTR(" W"), LINEAR_UNIT(fwretract.settings.swap_retract_length)
-        , PSTR(" F"), LINEAR_UNIT(MMS_TO_MMM(fwretract.settings.retract_feedrate_mm_s))
-        , SP_Z_STR, LINEAR_UNIT(fwretract.settings.retract_zraise)
-      );
-
-      CONFIG_ECHO_HEADING("Recover: S<length> F<units/m>");
-      CONFIG_ECHO_MSG(
-          "  M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_extra)
-        , " W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_extra)
-        , " F", LINEAR_UNIT(MMS_TO_MMM(fwretract.settings.retract_recover_feedrate_mm_s))
-      );
-
-      #if ENABLED(FWRETRACT_AUTORETRACT)
-        CONFIG_ECHO_HEADING("Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover");
-        CONFIG_ECHO_MSG("  M209 S", fwretract.autoretract_enabled);
-      #endif
-
-    #endif // FWRETRACT
+      fwretract.M207_report(forReplay);
+      fwretract.M208_report(forReplay);
+      TERN_(FWRETRACT_AUTORETRACT, fwretract.M209_report(forReplay));
+    #endif
 
     /**
      * Probe Offset