SDCARD_READONLY (#17884)

This commit is contained in:
Leandro A. F. Pereira 2020-05-30 21:59:29 -07:00 committed by GitHub
parent 2ad3da98d4
commit 801f99edad
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
7 changed files with 108 additions and 40 deletions

View File

@ -1084,6 +1084,8 @@
// Enable this option and set to HIGH if your SD cards are incorrectly detected. // Enable this option and set to HIGH if your SD cards are incorrectly detected.
//#define SD_DETECT_STATE HIGH //#define SD_DETECT_STATE HIGH
//#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash)
#define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished

View File

@ -2062,6 +2062,20 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
#endif #endif
#endif #endif
/**
* Make sure features that need to write to the SD card are
* disabled unless write support is enabled.
*/
#if ENABLED(SDCARD_READONLY)
#if ENABLED(POWER_LOSS_RECOVERY)
#error "POWER_LOSS_RECOVERY is incompatible with SDCARD_READONLY."
#elif ENABLED(BINARY_FILE_TRANSFER)
#error "BINARY_FILE_TRANSFER is incompatible with SDCARD_READONLY."
#elif ENABLED(SDCARD_EEPROM_EMULATION)
#error "SDCARD_EEPROM_EMULATION is incompatible with SDCARD_READONLY."
#endif
#endif
/** /**
* Make sure only one display is enabled * Make sure only one display is enabled
*/ */

View File

@ -179,8 +179,11 @@ void Sd2Card::chipSelect() {
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) { bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) {
if (ENABLED(SDCARD_READONLY)) return false;
csd_t csd; csd_t csd;
if (!readCSD(&csd)) goto FAIL; if (!readCSD(&csd)) goto FAIL;
// check for single block erase // check for single block erase
if (!csd.v1.erase_blk_en) { if (!csd.v1.erase_blk_en) {
// erase size mask // erase size mask
@ -535,9 +538,10 @@ bool Sd2Card::waitNotBusy(const millis_t timeout_ms) {
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) { bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) {
if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; // Use address if not SDHC card if (ENABLED(SDCARD_READONLY)) return false;
bool success = false; bool success = false;
if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; // Use address if not SDHC card
if (!cardCommand(CMD24, blockNumber)) { if (!cardCommand(CMD24, blockNumber)) {
if (writeData(DATA_START_BLOCK, src)) { if (writeData(DATA_START_BLOCK, src)) {
if (waitNotBusy(SD_WRITE_TIMEOUT)) { // Wait for flashing to complete if (waitNotBusy(SD_WRITE_TIMEOUT)) { // Wait for flashing to complete
@ -561,6 +565,8 @@ bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) {
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeData(const uint8_t* src) { bool Sd2Card::writeData(const uint8_t* src) {
if (ENABLED(SDCARD_READONLY)) return false;
bool success = true; bool success = true;
chipSelect(); chipSelect();
// Wait for previous write to finish // Wait for previous write to finish
@ -574,14 +580,9 @@ bool Sd2Card::writeData(const uint8_t* src) {
// Send one block of data for write block or write multiple blocks // Send one block of data for write block or write multiple blocks
bool Sd2Card::writeData(const uint8_t token, const uint8_t* src) { bool Sd2Card::writeData(const uint8_t token, const uint8_t* src) {
if (ENABLED(SDCARD_READONLY)) return false;
const uint16_t crc = const uint16_t crc = TERN(SD_CHECK_AND_RETRY, CRC_CCITT(src, 512), 0xFFFF);
#if ENABLED(SD_CHECK_AND_RETRY)
CRC_CCITT(src, 512)
#else
0xFFFF
#endif
;
spiSendBlock(token, src); spiSendBlock(token, src);
spiSend(crc >> 8); spiSend(crc >> 8);
spiSend(crc & 0xFF); spiSend(crc & 0xFF);
@ -607,6 +608,8 @@ bool Sd2Card::writeData(const uint8_t token, const uint8_t* src) {
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeStart(uint32_t blockNumber, const uint32_t eraseCount) { bool Sd2Card::writeStart(uint32_t blockNumber, const uint32_t eraseCount) {
if (ENABLED(SDCARD_READONLY)) return false;
bool success = false; bool success = false;
if (!cardAcmd(ACMD23, eraseCount)) { // Send pre-erase count if (!cardAcmd(ACMD23, eraseCount)) { // Send pre-erase count
if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; // Use address if not SDHC card if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; // Use address if not SDHC card
@ -626,6 +629,8 @@ bool Sd2Card::writeStart(uint32_t blockNumber, const uint32_t eraseCount) {
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeStop() { bool Sd2Card::writeStop() {
if (ENABLED(SDCARD_READONLY)) return false;
bool success = false; bool success = false;
chipSelect(); chipSelect();
if (waitNotBusy(SD_WRITE_TIMEOUT)) { if (waitNotBusy(SD_WRITE_TIMEOUT)) {

View File

@ -47,6 +47,8 @@ void (*SdBaseFile::dateTime_)(uint16_t* date, uint16_t* time) = 0;
// add a cluster to a file // add a cluster to a file
bool SdBaseFile::addCluster() { bool SdBaseFile::addCluster() {
if (ENABLED(SDCARD_READONLY)) return false;
if (!vol_->allocContiguous(1, &curCluster_)) return false; if (!vol_->allocContiguous(1, &curCluster_)) return false;
// if first cluster of file link to directory entry // if first cluster of file link to directory entry
@ -60,6 +62,8 @@ bool SdBaseFile::addCluster() {
// Add a cluster to a directory file and zero the cluster. // Add a cluster to a directory file and zero the cluster.
// return with first block of cluster in the cache // return with first block of cluster in the cache
bool SdBaseFile::addDirCluster() { bool SdBaseFile::addDirCluster() {
if (ENABLED(SDCARD_READONLY)) return false;
uint32_t block; uint32_t block;
// max folder size // max folder size
if (fileSize_ / sizeof(dir_t) >= 0xFFFF) return false; if (fileSize_ / sizeof(dir_t) >= 0xFFFF) return false;
@ -153,6 +157,8 @@ bool SdBaseFile::contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock) {
* *
*/ */
bool SdBaseFile::createContiguous(SdBaseFile* dirFile, const char* path, uint32_t size) { bool SdBaseFile::createContiguous(SdBaseFile* dirFile, const char* path, uint32_t size) {
if (ENABLED(SDCARD_READONLY)) return false;
uint32_t count; uint32_t count;
// don't allow zero length file // don't allow zero length file
if (size == 0) return false; if (size == 0) return false;
@ -419,6 +425,8 @@ bool SdBaseFile::make83Name(const char* str, uint8_t* name, const char** ptr) {
* directory, \a path is invalid or already exists in \a parent. * directory, \a path is invalid or already exists in \a parent.
*/ */
bool SdBaseFile::mkdir(SdBaseFile* parent, const char* path, bool pFlag) { bool SdBaseFile::mkdir(SdBaseFile* parent, const char* path, bool pFlag) {
if (ENABLED(SDCARD_READONLY)) return false;
uint8_t dname[11]; uint8_t dname[11];
SdBaseFile dir1, dir2; SdBaseFile dir1, dir2;
SdBaseFile* sub = &dir1; SdBaseFile* sub = &dir1;
@ -449,6 +457,8 @@ bool SdBaseFile::mkdir(SdBaseFile* parent, const char* path, bool pFlag) {
} }
bool SdBaseFile::mkdir(SdBaseFile* parent, const uint8_t dname[11]) { bool SdBaseFile::mkdir(SdBaseFile* parent, const uint8_t dname[11]) {
if (ENABLED(SDCARD_READONLY)) return false;
uint32_t block; uint32_t block;
dir_t d; dir_t d;
dir_t* p; dir_t* p;
@ -632,7 +642,7 @@ bool SdBaseFile::open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t ofla
} }
else { else {
// don't create unless O_CREAT and O_WRITE // don't create unless O_CREAT and O_WRITE
if (!(oflag & O_CREAT) || !(oflag & O_WRITE)) return false; if ((oflag & (O_CREAT | O_WRITE)) != (O_CREAT | O_WRITE)) return false;
if (emptyFound) { if (emptyFound) {
index = dirIndex_; index = dirIndex_;
p = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); p = cacheDirEntry(SdVolume::CACHE_FOR_WRITE);
@ -716,8 +726,14 @@ bool SdBaseFile::open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag) {
// open a cached directory entry. Assumes vol_ is initialized // open a cached directory entry. Assumes vol_ is initialized
bool SdBaseFile::openCachedEntry(uint8_t dirIndex, uint8_t oflag) { bool SdBaseFile::openCachedEntry(uint8_t dirIndex, uint8_t oflag) {
dir_t* p;
#if ENABLED(SDCARD_READONLY)
if (oflag & (O_WRITE | O_CREAT | O_TRUNC)) goto FAIL;
#endif
// location of entry in cache // location of entry in cache
dir_t* p = &vol_->cache()->dir[dirIndex]; p = &vol_->cache()->dir[dirIndex];
// write or truncate is an error for a directory or read-only file // write or truncate is an error for a directory or read-only file
if (p->attributes & (DIR_ATT_READ_ONLY | DIR_ATT_DIRECTORY)) { if (p->attributes & (DIR_ATT_READ_ONLY | DIR_ATT_DIRECTORY)) {
@ -1135,6 +1151,8 @@ dir_t* SdBaseFile::readDirCache() {
* or an I/O error occurred. * or an I/O error occurred.
*/ */
bool SdBaseFile::remove() { bool SdBaseFile::remove() {
if (ENABLED(SDCARD_READONLY)) return false;
dir_t* d; dir_t* d;
// free any clusters - will fail if read-only or directory // free any clusters - will fail if read-only or directory
if (!truncate(0)) return false; if (!truncate(0)) return false;
@ -1172,6 +1190,8 @@ bool SdBaseFile::remove() {
* or an I/O error occurred. * or an I/O error occurred.
*/ */
bool SdBaseFile::remove(SdBaseFile* dirFile, const char* path) { bool SdBaseFile::remove(SdBaseFile* dirFile, const char* path) {
if (ENABLED(SDCARD_READONLY)) return false;
SdBaseFile file; SdBaseFile file;
return file.open(dirFile, path, O_WRITE) ? file.remove() : false; return file.open(dirFile, path, O_WRITE) ? file.remove() : false;
} }
@ -1187,6 +1207,8 @@ bool SdBaseFile::remove(SdBaseFile* dirFile, const char* path) {
* file, newPath is invalid or already exists, or an I/O error occurs. * file, newPath is invalid or already exists, or an I/O error occurs.
*/ */
bool SdBaseFile::rename(SdBaseFile* dirFile, const char* newPath) { bool SdBaseFile::rename(SdBaseFile* dirFile, const char* newPath) {
if (ENABLED(SDCARD_READONLY)) return false;
dir_t entry; dir_t entry;
uint32_t dirCluster = 0; uint32_t dirCluster = 0;
SdBaseFile file; SdBaseFile file;
@ -1279,6 +1301,8 @@ restore:
* directory, is not empty, or an I/O error occurred. * directory, is not empty, or an I/O error occurred.
*/ */
bool SdBaseFile::rmdir() { bool SdBaseFile::rmdir() {
if (ENABLED(SDCARD_READONLY)) return false;
// must be open subdirectory // must be open subdirectory
if (!isSubDir()) return false; if (!isSubDir()) return false;
@ -1317,6 +1341,8 @@ bool SdBaseFile::rmdir() {
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool SdBaseFile::rmRfStar() { bool SdBaseFile::rmRfStar() {
if (ENABLED(SDCARD_READONLY)) return false;
uint32_t index; uint32_t index;
SdBaseFile f; SdBaseFile f;
rewind(); rewind();
@ -1424,7 +1450,7 @@ void SdBaseFile::setpos(filepos_t* pos) {
*/ */
bool SdBaseFile::sync() { bool SdBaseFile::sync() {
// only allow open files and directories // only allow open files and directories
if (!isOpen()) goto FAIL; if (ENABLED(SDCARD_READONLY) || !isOpen()) goto FAIL;
if (flags_ & F_FILE_DIR_DIRTY) { if (flags_ & F_FILE_DIR_DIRTY) {
dir_t* d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); dir_t* d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE);
@ -1524,6 +1550,8 @@ bool SdBaseFile::timestamp(SdBaseFile* file) {
*/ */
bool SdBaseFile::timestamp(uint8_t flags, uint16_t year, uint8_t month, bool SdBaseFile::timestamp(uint8_t flags, uint16_t year, uint8_t month,
uint8_t day, uint8_t hour, uint8_t minute, uint8_t second) { uint8_t day, uint8_t hour, uint8_t minute, uint8_t second) {
if (ENABLED(SDCARD_READONLY)) return false;
uint16_t dirDate, dirTime; uint16_t dirDate, dirTime;
dir_t* d; dir_t* d;
@ -1575,6 +1603,8 @@ bool SdBaseFile::timestamp(uint8_t flags, uint16_t year, uint8_t month,
* \a length is greater than the current file size or an I/O error occurs. * \a length is greater than the current file size or an I/O error occurs.
*/ */
bool SdBaseFile::truncate(uint32_t length) { bool SdBaseFile::truncate(uint32_t length) {
if (ENABLED(SDCARD_READONLY)) return false;
uint32_t newPos; uint32_t newPos;
// error if not a normal file or read-only // error if not a normal file or read-only
if (!isFile() || !(flags_ & O_WRITE)) return false; if (!isFile() || !(flags_ & O_WRITE)) return false;
@ -1636,6 +1666,10 @@ bool SdBaseFile::truncate(uint32_t length) {
* *
*/ */
int16_t SdBaseFile::write(const void* buf, uint16_t nbyte) { int16_t SdBaseFile::write(const void* buf, uint16_t nbyte) {
#if ENABLED(SDCARD_READONLY)
writeError = true; return -1;
#endif
// convert void* to uint8_t* - must be before goto statements // convert void* to uint8_t* - must be before goto statements
const uint8_t* src = reinterpret_cast<const uint8_t*>(buf); const uint8_t* src = reinterpret_cast<const uint8_t*>(buf);

View File

@ -46,6 +46,8 @@
// find a contiguous group of clusters // find a contiguous group of clusters
bool SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) { bool SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) {
if (ENABLED(SDCARD_READONLY)) return false;
// start of group // start of group
uint32_t bgnCluster; uint32_t bgnCluster;
// end of group // end of group
@ -117,18 +119,20 @@ bool SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) {
} }
bool SdVolume::cacheFlush() { bool SdVolume::cacheFlush() {
if (cacheDirty_) { #if DISABLED(SDCARD_READONLY)
if (!sdCard_->writeBlock(cacheBlockNumber_, cacheBuffer_.data)) if (cacheDirty_) {
return false; if (!sdCard_->writeBlock(cacheBlockNumber_, cacheBuffer_.data))
// mirror FAT tables
if (cacheMirrorBlock_) {
if (!sdCard_->writeBlock(cacheMirrorBlock_, cacheBuffer_.data))
return false; return false;
cacheMirrorBlock_ = 0;
// mirror FAT tables
if (cacheMirrorBlock_) {
if (!sdCard_->writeBlock(cacheMirrorBlock_, cacheBuffer_.data))
return false;
cacheMirrorBlock_ = 0;
}
cacheDirty_ = 0;
} }
cacheDirty_ = 0; #endif
}
return true; return true;
} }
@ -190,6 +194,8 @@ bool SdVolume::fatGet(uint32_t cluster, uint32_t* value) {
// Store a FAT entry // Store a FAT entry
bool SdVolume::fatPut(uint32_t cluster, uint32_t value) { bool SdVolume::fatPut(uint32_t cluster, uint32_t value) {
if (ENABLED(SDCARD_READONLY)) return false;
uint32_t lba; uint32_t lba;
// error if reserved cluster // error if reserved cluster
if (cluster < 2) return false; if (cluster < 2) return false;

View File

@ -446,8 +446,8 @@ void CardReader::endFilePrint(TERN_(SD_RESORT, const bool re_sort/*=false*/)) {
} }
void CardReader::openLogFile(char * const path) { void CardReader::openLogFile(char * const path) {
flag.logging = true; flag.logging = DISABLED(SDCARD_READONLY);
openFileWrite(path); TERN(SDCARD_READONLY,,openFileWrite(path));
} }
// //
@ -573,15 +573,19 @@ void CardReader::openFileWrite(char * const path) {
const char * const fname = diveToFile(false, curDir, path); const char * const fname = diveToFile(false, curDir, path);
if (!fname) return; if (!fname) return;
if (file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) { #if ENABLED(SDCARD_READONLY)
flag.saving = true;
selectFileByName(fname);
TERN_(EMERGENCY_PARSER, emergency_parser.disable());
echo_write_to_file(fname);
ui.set_status(fname);
}
else
openFailed(fname); openFailed(fname);
#else
if (file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
flag.saving = true;
selectFileByName(fname);
TERN_(EMERGENCY_PARSER, emergency_parser.disable());
echo_write_to_file(fname);
ui.set_status(fname);
}
else
openFailed(fname);
#endif
} }
// //
@ -596,13 +600,17 @@ void CardReader::removeFile(const char * const name) {
const char * const fname = diveToFile(false, curDir, name); const char * const fname = diveToFile(false, curDir, name);
if (!fname) return; if (!fname) return;
if (file.remove(curDir, fname)) { #if ENABLED(SDCARD_READONLY)
SERIAL_ECHOLNPAIR("File deleted:", fname); SERIAL_ECHOLNPAIR("Deletion failed (read-only), File: ", fname, ".");
sdpos = 0; #else
TERN_(SDCARD_SORT_ALPHA, presort()); if (file.remove(curDir, fname)) {
} SERIAL_ECHOLNPAIR("File deleted:", fname);
else sdpos = 0;
SERIAL_ECHOLNPAIR("Deletion failed, File: ", fname, "."); TERN_(SDCARD_SORT_ALPHA, presort());
}
else
SERIAL_ECHOLNPAIR("Deletion failed, File: ", fname, ".");
#endif
} }
void CardReader::report_status() { void CardReader::report_status() {

View File

@ -15,8 +15,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
opt_enable VIKI2 SDSUPPORT SERIAL_PORT_2 NEOPIXEL_LED opt_enable VIKI2 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 NEOPIXEL_LED
opt_set NEOPIXEL_PIN P1_16 opt_set NEOPIXEL_PIN P1_16
exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel"