More sanity checking for extruder requirements (PR#2531)

This commit is contained in:
Scott Lahteine 2015-07-27 01:16:59 -07:00 committed by Richard Wackerbarth
parent 78b7c486fd
commit 81bba7ed88

View File

@ -281,25 +281,42 @@
#endif #endif
/** /**
* Test required HEATER and TEMP_SENSOR defines * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set.
*/ */
#if EXTRUDERS > 3 #if EXTRUDERS > 3
#if !HAS_HEATER_3 #if !HAS_HEATER_3
#error HEATER_3_PIN not defined for this board. #error HEATER_3_PIN not defined for this board.
#elif !PIN_EXISTS(TEMP_3)
#error TEMP_3_PIN not defined for this board.
#elif !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE)
#error E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board.
#elif TEMP_SENSOR_3 == 0 #elif TEMP_SENSOR_3 == 0
#error TEMP_SENSOR_3 is required with 4 EXTRUDERS. #error TEMP_SENSOR_3 is required with 4 EXTRUDERS.
#endif #endif
#elif EXTRUDERS > 2 #elif EXTRUDERS > 2
#if !HAS_HEATER_2 #if !HAS_HEATER_2
#error HEATER_2_PIN not defined for this board. #error HEATER_2_PIN not defined for this board.
#elif !PIN_EXISTS(TEMP_2)
#error TEMP_2_PIN not defined for this board.
#elif !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE)
#error E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board.
#elif TEMP_SENSOR_2 == 0 #elif TEMP_SENSOR_2 == 0
#error TEMP_SENSOR_2 is required with 3 or more EXTRUDERS. #error TEMP_SENSOR_2 is required with 3 or more EXTRUDERS.
#endif #endif
#elif EXTRUDERS > 1 || defined(HEATERS_PARALLEL) #elif EXTRUDERS > 1
#if !PIN_EXISTS(TEMP_1)
#error TEMP_1_PIN not defined for this board.
#elif !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE)
#error E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board.
#endif
#endif
#if EXTRUDERS > 1 || defined(HEATERS_PARALLEL)
#if !HAS_HEATER_1 #if !HAS_HEATER_1
#error HEATER_1_PIN not defined for this board. #error HEATER_1_PIN not defined for this board.
#endif #endif
#endif #endif
#if TEMP_SENSOR_1 == 0 #if TEMP_SENSOR_1 == 0
#if EXTRUDERS > 1 #if EXTRUDERS > 1
#error TEMP_SENSOR_1 is required with 2 or more EXTRUDERS. #error TEMP_SENSOR_1 is required with 2 or more EXTRUDERS.
@ -307,10 +324,14 @@
#error TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT. #error TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT.
#endif #endif
#endif #endif
#if !HAS_HEATER_0 #if !HAS_HEATER_0
#error HEATER_0_PIN not defined for this board. #error HEATER_0_PIN not defined for this board.
#endif #elif !PIN_EXISTS(TEMP_0)
#if TEMP_SENSOR_0 == 0 #error TEMP_0_PIN not defined for this board.
#elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE)
#error E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board.
#elif TEMP_SENSOR_0 == 0
#error TEMP_SENSOR_0 is required. #error TEMP_SENSOR_0 is required.
#endif #endif