🎨 General cleanup of extui/dgus

In relation to #22121
This commit is contained in:
Scott Lahteine 2021-06-13 20:19:43 -05:00
parent adc17933cd
commit 83c74802f8
11 changed files with 405 additions and 457 deletions

View File

@ -180,7 +180,7 @@ void DGUSScreenHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var) {
float valuesend = 0;
switch (var.VP) {
default: return;
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_E0_PID_P: valuesend = value; break;
case VP_E0_PID_I: valuesend = unscalePID_i(value); break;
case VP_E0_PID_D: valuesend = unscalePID_d(value); break;
@ -393,7 +393,7 @@ void DGUSScreenHandler::HandleTemperatureChanged(DGUS_VP_Variable &var, void *va
switch (var.VP) {
default: return;
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_T_E0_Set:
NOMORE(newvalue, HEATER_0_MAXTEMP);
thermalManager.setTargetHotend(newvalue, 0);
@ -427,10 +427,8 @@ void DGUSScreenHandler::HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_p
uint8_t target_extruder;
switch (var.VP) {
default: return;
#if HOTENDS >= 1
case VP_Flowrate_E0: target_extruder = 0; break;
#endif
#if HOTENDS >= 2
case VP_Flowrate_E0: target_extruder = 0; break;
#if HAS_MULTI_EXTRUDER
case VP_Flowrate_E1: target_extruder = 1; break;
#endif
}
@ -450,11 +448,11 @@ void DGUSScreenHandler::HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr
ExtUI::extruder_t target_extruder;
switch (var.VP) {
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_MOVE_E0: target_extruder = ExtUI::extruder_t::E0; break;
#endif
#if HOTENDS >= 2
case VP_MOVE_E1: target_extruder = ExtUI::extruder_t::E1; break;
#if HAS_MULTI_EXTRUDER
case VP_MOVE_E1: target_extruder = ExtUI::extruder_t::E1; break;
#endif
#endif
default: return;
}
@ -526,11 +524,11 @@ void DGUSScreenHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, vo
ExtUI::extruder_t extruder;
switch (var.VP) {
default: return;
#if HOTENDS >= 1
#if HAS_EXTRUDERS
case VP_E0_STEP_PER_MM: extruder = ExtUI::extruder_t::E0; break;
#endif
#if HOTENDS >= 2
case VP_E1_STEP_PER_MM: extruder = ExtUI::extruder_t::E1; break;
#if HAS_MULTI_EXTRUDER
case VP_E1_STEP_PER_MM: extruder = ExtUI::extruder_t::E1; break;
#endif
#endif
}
DEBUG_ECHOLNPAIR_F("value:", value);
@ -548,7 +546,7 @@ void DGUSScreenHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, vo
switch (var.VP) {
default: break;
#if ENABLED(PIDTEMP)
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_PID_AUTOTUNE_E0: // Autotune Extruder 0
sprintf_P(buf, PSTR("M303 E%d C5 S210 U1"), ExtUI::extruder_t::E0);
break;
@ -598,17 +596,17 @@ void DGUSScreenHandler::HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr
uint8_t preheat_temp = 0;
switch (var.VP) {
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_E0_CONTROL:
#if HOTENDS >= 2
case VP_E1_CONTROL:
#if HOTENDS >= 3
case VP_E2_CONTROL:
#endif
#endif
preheat_temp = PREHEAT_1_TEMP_HOTEND;
break;
#endif
#if HOTENDS >= 2
case VP_E1_CONTROL:
#endif
#if HOTENDS >= 3
case VP_E2_CONTROL:
#endif
preheat_temp = PREHEAT_1_TEMP_HOTEND;
break;
case VP_BED_CONTROL:
preheat_temp = PREHEAT_1_TEMP_BED;
@ -660,7 +658,7 @@ void DGUSScreenHandler::HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr
switch (var.VP) {
default: return;
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_E0_BED_PREHEAT:
thermalManager.setTargetHotend(e_temp, 0);
TERN_(HAS_HEATED_BED, thermalManager.setTargetBed(bed_temp));

View File

@ -56,3 +56,21 @@ inline uint16_t swap16(const uint16_t value) { return (value & 0xFFU) << 8U | (v
#endif
extern DGUSScreenHandler ScreenHandler;
// Helper to define a DGUS_VP_Variable for common use-cases.
#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR) { \
.VP = VPADR, \
.memadr = VPADRVAR, \
.size = sizeof(VPADRVAR), \
.set_by_display_handler = RXFPTR, \
.send_to_display_handler = TXFPTR \
}
// Helper to define a DGUS_VP_Variable when the size of the var cannot be determined automatically (e.g., a string)
#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR) { \
.VP = VPADR, \
.memadr = VPADRVAR, \
.size = STRLEN, \
.set_by_display_handler = RXFPTR, \
.send_to_display_handler = TXFPTR \
}

View File

@ -41,14 +41,11 @@
uint16_t distanceToMove = 10;
#endif
const uint16_t VPList_Boot[] PROGMEM = {
VP_MARLIN_VERSION,
0x0000
};
const uint16_t VPList_Boot[] PROGMEM = { VP_MARLIN_VERSION, 0x0000 };
const uint16_t VPList_Main[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded. */
#if HOTENDS >= 1
// VP_M117, for completeness, but it cannot be auto-uploaded.
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set, VP_E0_STATUS,
#endif
#if HOTENDS >= 2
@ -70,7 +67,7 @@ const uint16_t VPList_Main[] PROGMEM = {
};
const uint16_t VPList_Temp[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
@ -83,8 +80,8 @@ const uint16_t VPList_Temp[] PROGMEM = {
};
const uint16_t VPList_Status[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded */
#if HOTENDS >= 1
// VP_M117, for completeness, but it cannot be auto-uploaded
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
@ -105,11 +102,11 @@ const uint16_t VPList_Status[] PROGMEM = {
const uint16_t VPList_Status2[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded */
#if HOTENDS >= 1
#if HAS_HOTEND
VP_Flowrate_E0,
#endif
#if HOTENDS >= 2
VP_Flowrate_E1,
#if HAS_MULTI_EXTRUDER
VP_Flowrate_E1,
#endif
#endif
VP_PrintProgress_Percentage,
VP_PrintTime,
@ -117,7 +114,7 @@ const uint16_t VPList_Status2[] PROGMEM = {
};
const uint16_t VPList_Preheat[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
@ -135,11 +132,11 @@ const uint16_t VPList_ManualMove[] PROGMEM = {
};
const uint16_t VPList_ManualExtrude[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#if HAS_MULTI_EXTRUDER
VP_T_E1_Is, VP_T_E1_Set,
#endif
#endif
VP_EPos,
0x0000
@ -156,23 +153,23 @@ const uint16_t VPList_SD_FlowRates[] PROGMEM = {
};
const uint16_t VPList_Filament_heating[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
VP_E0_FILAMENT_LOAD_UNLOAD,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
VP_E1_FILAMENT_LOAD_UNLOAD,
#if HAS_MULTI_EXTRUDER
VP_T_E1_Is, VP_T_E1_Set,
VP_E1_FILAMENT_LOAD_UNLOAD,
#endif
#endif
0x0000
};
const uint16_t VPList_Filament_load_unload[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_E0_FILAMENT_LOAD_UNLOAD,
#endif
#if HOTENDS >= 2
VP_E1_FILAMENT_LOAD_UNLOAD,
#if HAS_MULTI_EXTRUDER
VP_E1_FILAMENT_LOAD_UNLOAD,
#endif
#endif
0x0000
};
@ -184,7 +181,7 @@ const uint16_t VPList_SDFileList[] PROGMEM = {
const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
VP_PrintProgress_Percentage, VP_PrintTime,
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
@ -204,11 +201,11 @@ const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
};
const uint16_t VPList_SDPrintTune[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set, VP_Flowrate_E0,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set, VP_Flowrate_E1,
#if HAS_MULTI_EXTRUDER
VP_T_E1_Is, VP_T_E1_Set, VP_Flowrate_E1, // ERROR: Flowrate is per-extruder, not per-hotend
#endif
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
@ -222,11 +219,11 @@ const uint16_t VPList_StepPerMM[] PROGMEM = {
VP_X_STEP_PER_MM,
VP_Y_STEP_PER_MM,
VP_Z_STEP_PER_MM,
#if HOTENDS >= 1
#if HAS_EXTRUDERS
VP_E0_STEP_PER_MM,
#endif
#if HOTENDS >= 2
VP_E1_STEP_PER_MM,
#if HAS_MULTI_EXTRUDER
VP_E1_STEP_PER_MM,
#endif
#endif
0x0000
};
@ -265,7 +262,7 @@ const uint16_t VPList_PIDTuningWaiting[] PROGMEM = {
};
const uint16_t VPList_FLCPreheat[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HAS_HEATED_BED
@ -275,14 +272,14 @@ const uint16_t VPList_FLCPreheat[] PROGMEM = {
};
const uint16_t VPList_FLCPrinting[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_SD_Print_ProbeOffsetZ,
#endif
0x0000
};
const uint16_t VPList_Z_Offset[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_SD_Print_ProbeOffsetZ,
#endif
0x0000
@ -316,14 +313,6 @@ const struct VPMapping VPMap[] PROGMEM = {
const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;
// Helper to define a DGUS_VP_Variable for common use cases.
#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
// Helper to detect touch events
VPHELPER(VP_SCREENCHANGE, nullptr, ScreenHandler.ScreenChangeHook, nullptr),
@ -333,96 +322,96 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
#endif
VPHELPER(VP_CONFIRMED, nullptr, ScreenHandler.ScreenConfirmedOK, nullptr),
VPHELPER(VP_TEMP_ALL_OFF, nullptr, &ScreenHandler.HandleAllHeatersOff, nullptr),
VPHELPER(VP_TEMP_ALL_OFF, nullptr, ScreenHandler.HandleAllHeatersOff, nullptr),
#if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_OPTION, &distanceToMove, &ScreenHandler.HandleManualMoveOption, nullptr),
VPHELPER(VP_MOVE_OPTION, &distanceToMove, ScreenHandler.HandleManualMoveOption, nullptr),
#endif
#if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_X, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_X, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
#else
VPHELPER(VP_MOVE_X, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_X, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, ScreenHandler.HandleManualMove, nullptr),
#endif
VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &ScreenHandler.HandleMotorLockUnlock, nullptr),
VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, ScreenHandler.HandleMotorLockUnlock, nullptr),
#if ENABLED(POWER_LOSS_RECOVERY)
VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &ScreenHandler.HandlePowerLossRecovery, nullptr),
VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, ScreenHandler.HandlePowerLossRecovery, nullptr),
#endif
VPHELPER(VP_SETTINGS, nullptr, &ScreenHandler.HandleSettings, nullptr),
VPHELPER(VP_SETTINGS, nullptr, ScreenHandler.HandleSettings, nullptr),
#if ENABLED(SINGLE_Z_CALIBRATION)
VPHELPER(VP_Z_CALIBRATE, nullptr, &ScreenHandler.HandleZCalibration, nullptr),
VPHELPER(VP_Z_CALIBRATE, nullptr, ScreenHandler.HandleZCalibration, nullptr),
#endif
#if ENABLED(FIRST_LAYER_CAL)
VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &ScreenHandler.HandleFirstLayerCal, nullptr),
VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, ScreenHandler.HandleFirstLayerCal, nullptr),
#endif
{ .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
// M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
{ .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplay },
{ .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay },
// Temperature Data
#if HOTENDS >= 1
#if HAS_HOTEND
VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_MOVE_E0, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_MOVE_E0, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(DGUS_PREHEAT_UI)
VPHELPER(VP_E0_BED_PREHEAT, nullptr, &ScreenHandler.HandlePreheat, nullptr),
VPHELPER(VP_E0_BED_PREHEAT, nullptr, ScreenHandler.HandlePreheat, nullptr),
#endif
#if ENABLED(PIDTEMP)
VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
#endif
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, ScreenHandler.HandleFilamentOption, ScreenHandler.HandleFilamentLoadUnload),
#endif
#endif
#if HOTENDS >= 2
VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay), // ERROR: Flow is per-extruder, not per-hotend
VPHELPER(VP_MOVE_E1, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(PIDTEMP)
VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
#endif
VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, ScreenHandler.HandleFilamentOption, ScreenHandler.HandleFilamentLoadUnload),
#endif
#if HAS_HEATED_BED
VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(PIDTEMPBED)
VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
#endif
#endif
// Fan Data
#if HAS_FAN
#define FAN_VPHELPER(N) \
VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, &ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &ScreenHandler.HandleFanControl, nullptr), \
VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], ScreenHandler.HandleFanControl, nullptr), \
VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
REPEAT(FAN_COUNT, FAN_VPHELPER)
#endif
// Feedrate
VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, &ScreenHandler.DGUSLCD_SendWordValueToDisplay ),
VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
// Position Data
VPHELPER(VP_XPos, &current_position.x, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@ -430,7 +419,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_ZPos, &current_position.z, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
// Print Progress
VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay ),
VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay),
// Print Time
VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay),
@ -442,11 +431,11 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#if HOTENDS >= 1
#if HAS_EXTRUDERS
VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
#if HOTENDS >= 2
VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#if HAS_MULTI_EXTRUDER
VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
#endif
// SDCard File listing.
@ -463,7 +452,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, ScreenHandler.DGUSLCD_SD_ReallyAbort, nullptr),
VPHELPER(VP_SD_Print_Setting, nullptr, ScreenHandler.DGUSLCD_SD_PrintTune, nullptr),
#if HAS_BED_PROBE
VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, &ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
#if ENABLED(BABYSTEPPING)
VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, nullptr),
#endif
@ -475,10 +464,10 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
#endif
// Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
{ .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
VPHELPER(0, 0, 0, 0) // must be last entry.
};

View File

@ -249,7 +249,7 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
switch (var.VP) {
default: return;
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_E0_PID_P: newvalue = value; break;
case VP_E0_PID_I: newvalue = scalePID_i(value); break;
case VP_E0_PID_D: newvalue = scalePID_d(value); break;
@ -329,7 +329,7 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
}
if (filament_data.action == 0) { // Go back to utility screen
#if HOTENDS >= 1
#if HAS_HOTEND
thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0);
#endif
#if HOTENDS >= 2
@ -340,13 +340,13 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
else { // Go to the preheat screen to show the heating progress
switch (var.VP) {
default: return;
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_E0_FILAMENT_LOAD_UNLOAD:
filament_data.extruder = ExtUI::extruder_t::E0;
thermalManager.setTargetHotend(e_temp, filament_data.extruder);
break;
#endif
#if HOTENDS >= 2
#if HAS_MULTI_EXTRUDER
case VP_E1_FILAMENT_LOAD_UNLOAD:
filament_data.extruder = ExtUI::extruder_t::E1;
thermalManager.setTargetHotend(e_temp, filament_data.extruder);

View File

@ -48,11 +48,11 @@ const uint16_t VPList_Boot[] PROGMEM = {
const uint16_t VPList_Main[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded. */
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set, VP_E0_STATUS,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set, VP_BED_STATUS,
@ -70,11 +70,11 @@ const uint16_t VPList_Main[] PROGMEM = {
};
const uint16_t VPList_Temp[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
@ -84,11 +84,11 @@ const uint16_t VPList_Temp[] PROGMEM = {
const uint16_t VPList_Status[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded */
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
@ -105,11 +105,11 @@ const uint16_t VPList_Status[] PROGMEM = {
const uint16_t VPList_Status2[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded */
#if HOTENDS >= 1
#if HAS_HOTEND
VP_Flowrate_E0,
#endif
#if HOTENDS >= 2
VP_Flowrate_E1,
#if HOTENDS >= 2
VP_Flowrate_E1,
#endif
#endif
VP_PrintProgress_Percentage,
VP_PrintTime,
@ -117,11 +117,11 @@ const uint16_t VPList_Status2[] PROGMEM = {
};
const uint16_t VPList_Preheat[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
@ -135,11 +135,11 @@ const uint16_t VPList_ManualMove[] PROGMEM = {
};
const uint16_t VPList_ManualExtrude[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#endif
VP_EPos,
0x0000
@ -156,22 +156,22 @@ const uint16_t VPList_SD_FlowRates[] PROGMEM = {
};
const uint16_t VPList_Filament_heating[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
VP_E0_FILAMENT_LOAD_UNLOAD,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#endif
0x0000
};
const uint16_t VPList_Filament_load_unload[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_E0_FILAMENT_LOAD_UNLOAD,
#endif
#if HOTENDS >= 2
VP_E1_FILAMENT_LOAD_UNLOAD,
#if HOTENDS >= 2
VP_E1_FILAMENT_LOAD_UNLOAD,
#endif
#endif
0x0000
};
@ -183,11 +183,11 @@ const uint16_t VPList_SDFileList[] PROGMEM = {
const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
VP_PrintProgress_Percentage, VP_PrintTime,
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
@ -203,11 +203,11 @@ const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
};
const uint16_t VPList_SDPrintTune[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
@ -225,11 +225,11 @@ const uint16_t VPList_StepPerMM[] PROGMEM = {
VP_X_STEP_PER_MM,
VP_Y_STEP_PER_MM,
VP_Z_STEP_PER_MM,
#if HOTENDS >= 1
#if HAS_HOTEND
VP_E0_STEP_PER_MM,
#endif
#if HOTENDS >= 2
VP_E1_STEP_PER_MM,
#if HOTENDS >= 2
VP_E1_STEP_PER_MM,
#endif
#endif
0x0000
};
@ -268,7 +268,7 @@ const uint16_t VPList_PIDTuningWaiting[] PROGMEM = {
};
const uint16_t VPList_FLCPreheat[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HAS_HEATED_BED
@ -278,14 +278,14 @@ const uint16_t VPList_FLCPreheat[] PROGMEM = {
};
const uint16_t VPList_FLCPrinting[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_SD_Print_ProbeOffsetZ,
#endif
0x0000
};
const uint16_t VPList_Z_Offset[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_SD_Print_ProbeOffsetZ,
#endif
0x0000
@ -319,14 +319,6 @@ const struct VPMapping VPMap[] PROGMEM = {
const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;
// Helper to define a DGUS_VP_Variable for common use cases.
#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
// Helper to detect touch events
VPHELPER(VP_SCREENCHANGE, nullptr, ScreenHandler.ScreenChangeHook, nullptr),
@ -336,92 +328,92 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
#endif
VPHELPER(VP_CONFIRMED, nullptr, ScreenHandler.ScreenConfirmedOK, nullptr),
VPHELPER(VP_TEMP_ALL_OFF, nullptr, &ScreenHandler.HandleAllHeatersOff, nullptr),
VPHELPER(VP_TEMP_ALL_OFF, nullptr, ScreenHandler.HandleAllHeatersOff, nullptr),
#if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_OPTION, &distanceToMove, &ScreenHandler.HandleManualMoveOption, nullptr),
VPHELPER(VP_MOVE_OPTION, &distanceToMove, ScreenHandler.HandleManualMoveOption, nullptr),
#endif
#if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_X, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_X, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
#else
VPHELPER(VP_MOVE_X, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_X, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, ScreenHandler.HandleManualMove, nullptr),
#endif
VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &ScreenHandler.HandleMotorLockUnlock, nullptr),
VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, ScreenHandler.HandleMotorLockUnlock, nullptr),
#if ENABLED(POWER_LOSS_RECOVERY)
VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &ScreenHandler.HandlePowerLossRecovery, nullptr),
VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, ScreenHandler.HandlePowerLossRecovery, nullptr),
#endif
VPHELPER(VP_SETTINGS, nullptr, &ScreenHandler.HandleSettings, nullptr),
VPHELPER(VP_SETTINGS, nullptr, ScreenHandler.HandleSettings, nullptr),
#if ENABLED(SINGLE_Z_CALIBRATION)
VPHELPER(VP_Z_CALIBRATE, nullptr, &ScreenHandler.HandleZCalibration, nullptr),
VPHELPER(VP_Z_CALIBRATE, nullptr, ScreenHandler.HandleZCalibration, nullptr),
#endif
#if ENABLED(FIRST_LAYER_CAL)
VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &ScreenHandler.HandleFirstLayerCal, nullptr),
VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, ScreenHandler.HandleFirstLayerCal, nullptr),
#endif
{ .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
// M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
{ .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay },
{ .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay },
// Temperature Data
#if HOTENDS >= 1
#if HAS_HOTEND
VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_MOVE_E0, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_MOVE_E0, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(DGUS_PREHEAT_UI)
VPHELPER(VP_E0_BED_PREHEAT, nullptr, &ScreenHandler.HandlePreheat, nullptr),
VPHELPER(VP_E0_BED_PREHEAT, nullptr, ScreenHandler.HandlePreheat, nullptr),
#endif
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, ScreenHandler.HandleFilamentOption, ScreenHandler.HandleFilamentLoadUnload),
#endif
#if ENABLED(PIDTEMP)
VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
#endif
#endif
#if HOTENDS >= 2
VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_MOVE_E1, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#endif
#if HAS_HEATED_BED
VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(PIDTEMP)
VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
#endif
#endif
// Fan Data
#if HAS_FAN
#define FAN_VPHELPER(N) \
VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, &ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &ScreenHandler.HandleFanControl, nullptr), \
VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], ScreenHandler.HandleFanControl, nullptr), \
VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
REPEAT(FAN_COUNT, FAN_VPHELPER)
#endif
// Feedrate
VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, &ScreenHandler.DGUSLCD_SendWordValueToDisplay ),
VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
// Position Data
VPHELPER(VP_XPos, &current_position.x, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@ -429,23 +421,23 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_ZPos, &current_position.z, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
// Print Progress
VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay ),
VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay),
// Print Time
VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay ),
VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay),
#if ENABLED(PRINTCOUNTER)
VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay ),
VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay ),
VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay),
VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay),
#endif
VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#if HOTENDS >= 1
#if HAS_HOTEND
VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
#if HOTENDS >= 2
VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#if HOTENDS >= 2
VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
#endif
// SDCard File listing.
@ -462,7 +454,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, ScreenHandler.DGUSLCD_SD_ReallyAbort, nullptr),
VPHELPER(VP_SD_Print_Setting, nullptr, ScreenHandler.DGUSLCD_SD_PrintTune, nullptr),
#if HAS_BED_PROBE
VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, &ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
#if ENABLED(BABYSTEPPING)
VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, nullptr),
#endif
@ -474,10 +466,10 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
#endif
// Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
{ .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
VPHELPER(0, 0, 0, 0) // must be last entry.
};

View File

@ -249,7 +249,7 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
switch (var.VP) {
default: return;
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_E0_PID_P: newvalue = value; break;
case VP_E0_PID_I: newvalue = scalePID_i(value); break;
case VP_E0_PID_D: newvalue = scalePID_d(value); break;
@ -329,18 +329,18 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
}
if (filament_data.action == 0) { // Go back to utility screen
#if HOTENDS >= 1
#if HAS_HOTEND
thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0);
#endif
#if HOTENDS >= 2
thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1);
#if HOTENDS >= 2
thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1);
#endif
#endif
GotoScreen(DGUSLCD_SCREEN_UTILITY);
}
else { // Go to the preheat screen to show the heating progress
switch (var.VP) {
default: return;
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_E0_FILAMENT_LOAD_UNLOAD:
filament_data.extruder = ExtUI::extruder_t::E0;
thermalManager.setTargetHotend(e_temp, filament_data.extruder);

View File

@ -120,11 +120,11 @@ const uint16_t VPList_Boot[] PROGMEM = {
const uint16_t VPList_Main[] PROGMEM = {
// VP_M117, for completeness, but it cannot be auto-uploaded.
#if HOTENDS >= 1
#if HAS_HOTEND
MKSLIST_E_ITEM(0) VP_E0_STATUS,
#endif
#if HOTENDS >= 2
MKSLIST_E_ITEM(1)
#if HOTENDS >= 2
MKSLIST_E_ITEM(1) VP_E1_STATUS,
#endif
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set, VP_BED_STATUS,
@ -498,20 +498,6 @@ const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;
const char H43Version[] PROGMEM = "MKS H43_V1.30";
const char Updata_Time[] PROGMEM = STRING_DISTRIBUTION_DATE;
// Helper to define a DGUS_VP_Variable for common use cases.
#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR) \
{ \
.VP = VPADR, .memadr = VPADRVAR, .size = sizeof(VPADRVAR), \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR \
}
// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR) \
{ \
.VP = VPADR, .memadr = VPADRVAR, .size = STRLEN, \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR \
}
const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
// Helper to detect touch events
VPHELPER(VP_SCREENCHANGE, nullptr, ScreenHandler.ScreenChangeHook, nullptr),
@ -522,109 +508,109 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_CONFIRMED, nullptr, ScreenHandler.ScreenConfirmedOK, nullptr),
// Back Button
VPHELPER(VP_BACK_PAGE, nullptr, &ScreenHandler.ScreenBackChange, nullptr),
VPHELPER(VP_TEMP_ALL_OFF, nullptr, &ScreenHandler.HandleAllHeatersOff, nullptr),
VPHELPER(VP_BACK_PAGE, nullptr, ScreenHandler.ScreenBackChange, nullptr),
VPHELPER(VP_TEMP_ALL_OFF, nullptr, ScreenHandler.HandleAllHeatersOff, nullptr),
VPHELPER(VP_MOVE_X, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_X, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_X_HOME, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_Y_HOME, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_Z_HOME, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_X_HOME, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_Y_HOME, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_Z_HOME, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_DISTANCE, &manualMoveStep, &ScreenHandler.GetManualMovestep, nullptr),
VPHELPER(VP_MOVE_DISTANCE, &manualMoveStep, ScreenHandler.GetManualMovestep, nullptr),
VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_LEVEL_POINT, nullptr, &ScreenHandler.ManualAssistLeveling, nullptr),
VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_LEVEL_POINT, nullptr, ScreenHandler.ManualAssistLeveling, nullptr),
#if ENABLED(POWER_LOSS_RECOVERY)
VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &ScreenHandler.HandlePowerLossRecovery, nullptr),
VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, ScreenHandler.HandlePowerLossRecovery, nullptr),
#endif
VPHELPER(VP_SETTINGS, nullptr, &ScreenHandler.HandleSettings, nullptr),
VPHELPER(VP_SETTINGS, nullptr, ScreenHandler.HandleSettings, nullptr),
#if ENABLED(SINGLE_Z_CALIBRATION)
VPHELPER(VP_Z_CALIBRATE, nullptr, &ScreenHandler.HandleZCalibration, nullptr),
VPHELPER(VP_Z_CALIBRATE, nullptr, ScreenHandler.HandleZCalibration, nullptr),
#endif
#if ENABLED(FIRST_LAYER_CAL)
VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &ScreenHandler.HandleFirstLayerCal, nullptr),
VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, ScreenHandler.HandleFirstLayerCal, nullptr),
#endif
{.VP = VP_MARLIN_VERSION, .memadr = (void *)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
{.VP = VP_MARLIN_VERSION, .memadr = (void *)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
// M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
{.VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay},
{.VP = VP_MKS_H43_VERSION, .memadr = (void *)H43Version, .size = VP_MKS_H43_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
{.VP = VP_MKS_H43_UpdataVERSION, .memadr = (void *)Updata_Time, .size = VP_MKS_H43_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
{.VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay},
{.VP = VP_MKS_H43_VERSION, .memadr = (void *)H43Version, .size = VP_MKS_H43_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
{.VP = VP_MKS_H43_UpdataVERSION, .memadr = (void *)Updata_Time, .size = VP_MKS_H43_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
// Temperature Data
#if HOTENDS >= 1
#if HAS_HOTEND
VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_MOVE_E0, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_MOVE_E0, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(DGUS_PREHEAT_UI)
VPHELPER(VP_E0_BED_PREHEAT, nullptr, &ScreenHandler.HandlePreheat, nullptr),
VPHELPER(VP_E0_BED_PREHEAT, nullptr, ScreenHandler.HandlePreheat, nullptr),
#endif
#if ENABLED(PIDTEMP)
VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
#endif
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
VPHELPER(VP_LOAD_Filament, nullptr, &ScreenHandler.MKS_FilamentLoad, nullptr),
VPHELPER(VP_UNLOAD_Filament, nullptr, &ScreenHandler.MKS_FilamentUnLoad, nullptr),
VPHELPER(VP_Filament_distance, &distanceFilament, &ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Filament_speed, &filamentSpeed_mm_s, &ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_LOAD_Filament, nullptr, ScreenHandler.MKS_FilamentLoad, nullptr),
VPHELPER(VP_UNLOAD_Filament, nullptr, ScreenHandler.MKS_FilamentUnLoad, nullptr),
VPHELPER(VP_Filament_distance, &distanceFilament, ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Filament_speed, &filamentSpeed_mm_s, ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
#endif
#endif
#if HOTENDS >= 2
VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_MOVE_E1, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
VPHELPER(VP_Filament_distance, &distanceFilament, &ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
VPHELPER(VP_Filament_speed, &filamentSpeed_mm_s, &ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Filament_distance, &distanceFilament, ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
VPHELPER(VP_Filament_speed, &filamentSpeed_mm_s, ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
#endif
#if ENABLED(PIDTEMP)
VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
#endif
VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, ScreenHandler.HandleFilamentOption, ScreenHandler.HandleFilamentLoadUnload),
#endif
#if HAS_HEATED_BED
VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(PIDTEMPBED)
VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
#endif
#endif
// Fan Data
#if HAS_FAN
#define FAN_VPHELPER(N) \
VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_SetUint8, &ScreenHandler.DGUSLCD_SendFanToDisplay), \
VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &ScreenHandler.HandleFanControl, nullptr), \
VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_SetUint8, ScreenHandler.DGUSLCD_SendFanToDisplay), \
VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], ScreenHandler.HandleFanControl, nullptr), \
VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
REPEAT(FAN_COUNT, FAN_VPHELPER)
#endif
// Feedrate
VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
// Position Data
VPHELPER(VP_XPos, &current_position.x, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@ -646,8 +632,8 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
// Print Progress
VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay),
//LCD Control
VPHELPER(VP_LCD_BLK, &lcd_default_light, &ScreenHandler.LCD_BLK_Adjust, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
// LCD Control
VPHELPER(VP_LCD_BLK, &lcd_default_light, ScreenHandler.LCD_BLK_Adjust, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
// Print Time
VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay_MKS),
@ -665,22 +651,22 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_Y_MAX_SPEED, &planner.settings.max_feedrate_mm_s[Y_AXIS], ScreenHandler.HandleMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
VPHELPER(VP_Z_MAX_SPEED, &planner.settings.max_feedrate_mm_s[Z_AXIS], ScreenHandler.HandleMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
#if HOTENDS >= 1
#if HAS_HOTEND
VPHELPER(VP_E0_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E_AXIS_N(0)], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
#endif
#if HOTENDS >= 2
VPHELPER(VP_E1_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E_AXIS_N(1)], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
#if HOTENDS >= 2
VPHELPER(VP_E1_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E_AXIS_N(1)], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
#endif
#endif
VPHELPER(VP_X_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[X_AXIS], ScreenHandler.HandleMaxAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Y_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[Y_AXIS], ScreenHandler.HandleMaxAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Z_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[Z_AXIS], ScreenHandler.HandleMaxAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
#if HOTENDS >= 1
#if HAS_HOTEND
VPHELPER(VP_E0_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(0)], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
#endif
#if HOTENDS >= 2
VPHELPER(VP_E1_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(1)], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
#if HOTENDS >= 2
VPHELPER(VP_E1_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(1)], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
#endif
#endif
VPHELPER(VP_TRAVEL_SPEED, (uint16_t *)&planner.settings.travel_acceleration, ScreenHandler.HandleTravelAccChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
@ -748,18 +734,17 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_MESH_LEVEL_POINT,nullptr, ScreenHandler.MeshLevel,nullptr),
#if ENABLED(PREVENT_COLD_EXTRUSION)
VPHELPER(VP_Min_EX_T_E, &thermalManager.extrude_min_temp, &ScreenHandler.GetMinExtrudeTemp, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Min_EX_T_E, &thermalManager.extrude_min_temp, ScreenHandler.GetMinExtrudeTemp, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
#endif
VPHELPER(VP_AutoTurnOffSw, nullptr, &ScreenHandler.GetTurnOffCtrl, nullptr),
VPHELPER(VP_AutoTurnOffSw, nullptr, ScreenHandler.GetTurnOffCtrl, nullptr),
#if HOTENDS >= 1
#if HAS_HOTEND
VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], ScreenHandler.HandleStepPerMMExtruderChanged_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
#if HOTENDS >= 2
VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
#endif
#endif
#if HOTENDS >= 2
VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
#endif
// SDCard File listing
@ -781,8 +766,8 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, ScreenHandler.DGUSLCD_SD_ReallyAbort, nullptr),
VPHELPER(VP_SD_Print_Setting, nullptr, ScreenHandler.DGUSLCD_SD_PrintTune, nullptr),
#if ENABLED(BABYSTEPPING)
VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, &ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
VPHELPER(VP_ZOffset_DE_DIS, &z_offset_add, nullptr, &ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
VPHELPER(VP_ZOffset_DE_DIS, &z_offset_add, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
#endif
#if HAS_BED_PROBE
VPHELPER(VP_OFFSET_X, &probe.offset.x, ScreenHandler.GetOffsetValue,ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@ -798,15 +783,15 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
#endif
// Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
//{.VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
//{.VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
//{.VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
//{.VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
//{.VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
//{.VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
//{.VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
//{.VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
{.VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
{.VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
{.VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
{.VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
{.VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
{.VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
{.VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
{.VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
VPHELPER(0, 0, 0, 0) // must be last entry.
};

View File

@ -575,7 +575,6 @@ void DGUSScreenHandler::MeshLevel(DGUS_VP_Variable &var, void *val_ptr) {
settings.save();
}
else if (mesh_point_count == 0) {
mesh_point_count = GRID_MAX_POINTS;
soft_endstop._enabled = true;
settings.save();

View File

@ -189,12 +189,12 @@ public:
static void PrintReturn(DGUS_VP_Variable &var, void *val_ptr);
#endif
// OK Button the Confirm screen.
// OK Button on the Confirm screen.
static void ScreenConfirmedOK(DGUS_VP_Variable &var, void *val_ptr);
// Update data after went to new screen (by display or by GotoScreen)
// remember: store the last-displayed screen, so it can get returned to.
// (e.g for pop up messages)
// Update data after going to a new screen (by display or by GotoScreen)
// remember: store the last-displayed screen, so it can be returned to.
// (e.g for popup messages)
static void UpdateNewScreen(DGUSLCD_Screens newscreen, bool popup=false);
// Recall the remembered screen.

View File

@ -55,11 +55,11 @@ const uint16_t VPList_Main[] PROGMEM = {
};
const uint16_t VPList_Temp[] PROGMEM = {
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
@ -69,11 +69,11 @@ const uint16_t VPList_Temp[] PROGMEM = {
const uint16_t VPList_Status[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded */
#if HOTENDS >= 1
#if HAS_HOTEND
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
@ -90,72 +90,40 @@ const uint16_t VPList_Status[] PROGMEM = {
const uint16_t VPList_Status2[] PROGMEM = {
// VP_M117, for completeness, but it cannot be auto-uploaded
#if HOTENDS >= 1
#if HAS_HOTEND
VP_Flowrate_E0,
#endif
#if HOTENDS >= 2
VP_Flowrate_E1,
#if HOTENDS >= 2
VP_Flowrate_E1,
#endif
#endif
VP_PrintProgress_Percentage,
VP_PrintTime,
0x0000
};
const uint16_t VPList_ManualMove[] PROGMEM = {
VP_XPos, VP_YPos, VP_ZPos,
0x0000
};
const uint16_t VPList_ManualExtrude[] PROGMEM = {
VP_EPos,
0x0000
};
const uint16_t VPList_FanAndFeedrate[] PROGMEM = {
VP_Feedrate_Percentage, VP_Fan0_Percentage,
0x0000
};
const uint16_t VPList_SD_FlowRates[] PROGMEM = {
VP_Flowrate_E0, VP_Flowrate_E1,
0x0000
};
const uint16_t VPList_SDFileList[] PROGMEM = {
VP_SD_FileName0, VP_SD_FileName1, VP_SD_FileName2, VP_SD_FileName3, VP_SD_FileName4,
0x0000
};
const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
VP_PrintProgress_Percentage, VP_PrintTime,
0x0000
};
const uint16_t VPList_ManualMove[] PROGMEM = { VP_XPos, VP_YPos, VP_ZPos, 0x0000 };
const uint16_t VPList_ManualExtrude[] PROGMEM = { VP_EPos, 0x0000 };
const uint16_t VPList_FanAndFeedrate[] PROGMEM = { VP_Feedrate_Percentage, VP_Fan0_Percentage, 0x0000 };
const uint16_t VPList_SD_FlowRates[] PROGMEM = { VP_Flowrate_E0, VP_Flowrate_E1, 0x0000 };
const uint16_t VPList_SDFileList[] PROGMEM = { VP_SD_FileName0, VP_SD_FileName1, VP_SD_FileName2, VP_SD_FileName3, VP_SD_FileName4, 0x0000 };
const uint16_t VPList_SD_PrintManipulation[] PROGMEM = { VP_PrintProgress_Percentage, VP_PrintTime, 0x0000 };
const struct VPMapping VPMap[] PROGMEM = {
{ DGUSLCD_SCREEN_BOOT, VPList_Boot },
{ DGUSLCD_SCREEN_MAIN, VPList_Main },
{ DGUSLCD_SCREEN_TEMPERATURE, VPList_Temp },
{ DGUSLCD_SCREEN_STATUS, VPList_Status },
{ DGUSLCD_SCREEN_STATUS2, VPList_Status2 },
{ DGUSLCD_SCREEN_MANUALMOVE, VPList_ManualMove },
{ DGUSLCD_SCREEN_MANUALEXTRUDE, VPList_ManualExtrude },
{ DGUSLCD_SCREEN_FANANDFEEDRATE, VPList_FanAndFeedrate },
{ DGUSLCD_SCREEN_FLOWRATES, VPList_SD_FlowRates },
{ DGUSLCD_SCREEN_BOOT, VPList_Boot },
{ DGUSLCD_SCREEN_MAIN, VPList_Main },
{ DGUSLCD_SCREEN_TEMPERATURE, VPList_Temp },
{ DGUSLCD_SCREEN_STATUS, VPList_Status },
{ DGUSLCD_SCREEN_STATUS2, VPList_Status2 },
{ DGUSLCD_SCREEN_MANUALMOVE, VPList_ManualMove },
{ DGUSLCD_SCREEN_MANUALEXTRUDE, VPList_ManualExtrude },
{ DGUSLCD_SCREEN_FANANDFEEDRATE, VPList_FanAndFeedrate },
{ DGUSLCD_SCREEN_FLOWRATES, VPList_SD_FlowRates },
{ DGUSLCD_SCREEN_SDPRINTMANIPULATION, VPList_SD_PrintManipulation },
{ DGUSLCD_SCREEN_SDFILELIST, VPList_SDFileList },
{ DGUSLCD_SCREEN_SDFILELIST, VPList_SDFileList },
{ 0 , nullptr } // List is terminated with an nullptr as table entry.
};
const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;
// Helper to define a DGUS_VP_Variable for common use cases.
#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
// Helper to detect touch events
VPHELPER(VP_SCREENCHANGE, nullptr, ScreenHandler.ScreenChangeHook, nullptr),
@ -165,72 +133,71 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
#endif
VPHELPER(VP_CONFIRMED, nullptr, ScreenHandler.ScreenConfirmedOK, nullptr),
VPHELPER(VP_TEMP_ALL_OFF, nullptr, &ScreenHandler.HandleAllHeatersOff, nullptr),
VPHELPER(VP_TEMP_ALL_OFF, nullptr, ScreenHandler.HandleAllHeatersOff, nullptr),
#if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_OPTION, &distanceToMove, &ScreenHandler.HandleManualMoveOption, nullptr),
VPHELPER(VP_MOVE_OPTION, &distanceToMove, ScreenHandler.HandleManualMoveOption, nullptr),
#endif
#if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_X, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_X, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
#else
VPHELPER(VP_MOVE_X, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, &ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_X, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, ScreenHandler.HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, ScreenHandler.HandleManualMove, nullptr),
#endif
VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &ScreenHandler.HandleMotorLockUnlock, nullptr),
VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, ScreenHandler.HandleMotorLockUnlock, nullptr),
#if ENABLED(POWER_LOSS_RECOVERY)
VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &ScreenHandler.HandlePowerLossRecovery, nullptr),
VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, ScreenHandler.HandlePowerLossRecovery, nullptr),
#endif
VPHELPER(VP_SETTINGS, nullptr, &ScreenHandler.HandleSettings, nullptr),
VPHELPER(VP_SETTINGS, nullptr, ScreenHandler.HandleSettings, nullptr),
{ .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
// M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
{ .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplay },
{ .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay },
// Temperature Data
#if HOTENDS >= 1
#if HAS_HOTEND
VPHELPER(VP_T_E0_Is, nullptr, nullptr, SET_VARIABLE(getActualTemp_celsius, E0, long)),
VPHELPER(VP_T_E0_Set, nullptr, GET_VARIABLE(setTargetTemp_celsius, E0),
SET_VARIABLE(getTargetTemp_celsius, E0)),
VPHELPER(VP_Flowrate_E0, nullptr, ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E0_Set, nullptr, GET_VARIABLE(setTargetTemp_celsius, E0), SET_VARIABLE(getTargetTemp_celsius, E0)),
VPHELPER(VP_Flowrate_E0, nullptr, ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_MOVE_E0, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_MOVE_E0, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(DGUS_PREHEAT_UI)
VPHELPER(VP_E0_BED_PREHEAT, nullptr, &ScreenHandler.HandlePreheat, nullptr),
VPHELPER(VP_E0_BED_PREHEAT, nullptr, ScreenHandler.HandlePreheat, nullptr),
#endif
#if ENABLED(PIDTEMP)
VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
#endif
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, ScreenHandler.HandleFilamentOption, ScreenHandler.HandleFilamentLoadUnload),
#endif
#endif
#if HOTENDS >= 2
VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_MOVE_E1, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(PIDTEMP)
VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
#endif
#endif
#if HAS_HEATED_BED
VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, ScreenHandler.HandleHeaterControl, nullptr),
VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(PIDTEMPBED)
VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
@ -241,14 +208,14 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
// Fan Data
#if HAS_FAN
#define FAN_VPHELPER(N) \
VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, &ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &ScreenHandler.HandleFanControl, nullptr), \
VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], ScreenHandler.HandleFanControl, nullptr), \
VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
REPEAT(FAN_COUNT, FAN_VPHELPER)
#endif
// Feedrate
VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, &ScreenHandler.DGUSLCD_SendWordValueToDisplay ),
VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
// Position Data
VPHELPER(VP_XPos, &current_position.x, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@ -256,23 +223,23 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_ZPos, &current_position.z, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
// Print Progress
VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay ),
VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay),
// Print Time
VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay ),
VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay),
#if ENABLED(PRINTCOUNTER)
VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay ),
VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay ),
VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay),
VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay),
#endif
VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#if HOTENDS >= 1
#if HAS_HOTEND
VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
#if HOTENDS >= 2
VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#if HOTENDS >= 2
VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
#endif
// SDCard File listing.
@ -289,7 +256,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, ScreenHandler.DGUSLCD_SD_ReallyAbort, nullptr),
VPHELPER(VP_SD_Print_Setting, nullptr, ScreenHandler.DGUSLCD_SD_PrintTune, nullptr),
#if HAS_BED_PROBE
VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, &ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
#if ENABLED(BABYSTEPPING)
VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, nullptr),
#endif
@ -301,10 +268,10 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
#endif
// Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
{ .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
VPHELPER(0, 0, 0, 0) // must be last entry.
};

View File

@ -251,7 +251,7 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
switch (var.VP) {
default: return;
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_E0_PID_P: newvalue = value; break;
case VP_E0_PID_I: newvalue = scalePID_i(value); break;
case VP_E0_PID_D: newvalue = scalePID_d(value); break;
@ -331,18 +331,18 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
}
if (filament_data.action == 0) { // Go back to utility screen
#if HOTENDS >= 1
#if HAS_HOTEND
thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0);
#endif
#if HOTENDS >= 2
thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1);
#if HOTENDS >= 2
thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1);
#endif
#endif
GotoScreen(DGUSLCD_SCREEN_UTILITY);
}
else { // Go to the preheat screen to show the heating progress
switch (var.VP) {
default: return;
#if HOTENDS >= 1
#if HAS_HOTEND
case VP_E0_FILAMENT_LOAD_UNLOAD:
filament_data.extruder = ExtUI::extruder_t::E0;
thermalManager.setTargetHotend(e_temp, filament_data.extruder);