Merge pull request #4378 from thinkyhead/rc_debug_leveling_docs

Document DEBUG_LEVELING_FEATURE

Marlin/Configuration.h

@@ -669,6 +669,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/Cartesio/Configuration.h

@@ -669,6 +669,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/Felix/Configuration.h

@@ -651,6 +651,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -649,6 +649,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/Hephestos/Configuration.h

@@ -661,6 +661,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -663,6 +663,10 @@
 // @section bedlevel
 
 #define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/K8200/Configuration.h

@@ -686,6 +686,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/K8400/Configuration.h

@@ -669,6 +669,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/K8400/Dual-head/Configuration.h

@@ -669,6 +669,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -669,6 +669,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/RigidBot/Configuration.h

@@ -666,6 +666,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/SCARA/Configuration.h

@@ -677,6 +677,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/TAZ4/Configuration.h

@@ -690,6 +690,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/WITBOX/Configuration.h

@@ -661,6 +661,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -669,6 +669,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -758,6 +758,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/delta/generic/Configuration.h

@@ -752,6 +752,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -755,6 +755,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -749,6 +749,10 @@
 // @section bedlevel
 
 #define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -750,6 +750,10 @@
 // @section bedlevel
 
 #define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/makibox/Configuration.h

@@ -672,6 +672,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -659,6 +659,10 @@
 // @section bedlevel
 
 //#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
+
+// Enable this feature to get detailed logging of G28, G29, M48, etc.
+// Logging is off by default. Enable this logging feature with 'M111 S32'.
+// NOTE: Requires a huge amount of PROGMEM.
 //#define DEBUG_LEVELING_FEATURE
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)