Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1

This commit is contained in:
daid303 2012-12-11 13:38:34 +01:00
commit 8b58edc70e
4 changed files with 18 additions and 9 deletions

View File

@ -256,8 +256,8 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
// The position of the homing switches
//#define MANUAL_HOME_POSITIONS // If defined, manualy programed locations will be used
//#define BED_CENTER_AT_0_0 // If defined the center of the bed is defined as (0,0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
//Manual homing switch locations:
#define MANUAL_X_HOME_POS 0

View File

@ -78,7 +78,7 @@
//// AUTOSET LOCATIONS OF LIMIT SWITCHES
//// Added by ZetaPhoenix 09-15-2012
#ifdef MANUAL_HOME_POSITION //Use manual limit switch locations
#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations
#define X_HOME_POS MANUAL_X_HOME_POS
#define Y_HOME_POS MANUAL_Y_HOME_POS
#define Z_HOME_POS MANUAL_Z_HOME_POS

View File

@ -173,7 +173,11 @@ F_CPU ?= 16000000
ifeq ($(HARDWARE_VARIANT), arduino)
HARDWARE_SRC = $(ARDUINO_INSTALL_DIR)/hardware/arduino/cores/arduino
else
HARDWARE_SRC = $(HARDWARE_VARIANT)/cores/arduino
ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
HARDWARE_SRC = ../ArduinoAddons/Arduino_1.x.x/$(HARDWARE_VARIANT)/cores/arduino
else
HARDWARE_SRC = ../ArduinoAddons/Arduino_0.xx/$(HARDWARE_VARIANT)/cores/arduino
endif
endif
TARGET = $(notdir $(CURDIR))

View File

@ -973,19 +973,16 @@
#define X_STEP_PIN 0
#define X_DIR_PIN 1
#define X_ENABLE_PIN 39
#define X_MIN_PIN 13
#define X_MAX_PIN -1
#define Y_STEP_PIN 2
#define Y_DIR_PIN 3
#define Y_ENABLE_PIN 38
#define Y_MIN_PIN 14
#define Y_MAX_PIN -1
#define Z_STEP_PIN 4
#define Z_DIR_PIN 5
#define Z_ENABLE_PIN 23
#define Z_MIN_PIN 15
#define Z_MAX_PIN -1
#define E0_STEP_PIN 6
@ -997,11 +994,19 @@
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed
#define FAN_PIN 22 // Fan
// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h
// for the fan and Teensyduino uses a different pin mapping.
#if MOTHERBOARD == 8
#if MOTHERBOARD == 8 // Teensylu
#define X_MIN_PIN 13
#define Y_MIN_PIN 14
#define Z_MIN_PIN 15
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#else
#else // Printrboard
#define X_MIN_PIN 35
#define Y_MIN_PIN 8
#define Z_MIN_PIN 36
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#endif