diff --git a/.github/FUNDING.yml b/.github/FUNDING.yml index 70734d497..a97324293 100644 --- a/.github/FUNDING.yml +++ b/.github/FUNDING.yml @@ -1,3 +1,3 @@ github: [thinkyhead] patreon: thinkyhead -custom: ["http://www.thinkyhead.com/donate-to-marlin"] +custom: ["https://www.thinkyhead.com/donate-to-marlin"] diff --git a/.github/contributing.md b/.github/contributing.md index 808c87bb0..ad67718ee 100644 --- a/.github/contributing.md +++ b/.github/contributing.md @@ -34,16 +34,15 @@ This project and everyone participating in it is governed by the [Marlin Code of We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions. -* [Marlin RepRap forum](http://forums.reprap.org/list.php?415) +* [Marlin RepRap forum](https://reprap.org/forum/list.php?415) * [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/) -If chat is more your speed, you can join the MarlinFirmware Slack team: +If chat is more your speed, you can join the MarlinFirmware Discord server: -* Join the Marlin Slack Team - * To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead. - * Even though Slack is a chat service, sometimes it takes several hours for community members to respond — please be patient! - * Use the `#general` channel for general questions or discussion about Marlin. - * Other channels exist for certain topics. Check the channel list. +* Use the link https://discord.gg/n5NJ59y to join up as a General User. +* Even though our Discord is pretty active, it may take a while for community members to respond — please be patient! +* Use the `#general` channel for general questions or discussion about Marlin. +* Other channels exist for certain topics or are limited to Patrons. Check the channel list. ## How Can I Contribute? diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index f02e69ee5..2efe284ac 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -463,7 +463,7 @@ //=========================================================================== //============================= PID Settings ================================ //=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning +// PID Tuning Guide here: https://reprap.org/wiki/PID_Tuning // Comment the following line to disable PID and enable bang-bang. #define PIDTEMP diff --git a/Marlin/Marlin.ino b/Marlin/Marlin.ino index ae5bca1df..9bfb2881b 100644 --- a/Marlin/Marlin.ino +++ b/Marlin/Marlin.ino @@ -35,7 +35,7 @@ Configuration Getting Help - - http://forums.reprap.org/list.php?415 + - https://reprap.org/forum/list.php?415 The Marlin Discussion Forum is a great place to get help from other Marlin users who may have experienced similar issues to your own. diff --git a/Marlin/src/HAL/AVR/fastio.h b/Marlin/src/HAL/AVR/fastio.h index a45e0f2be..787275271 100644 --- a/Marlin/src/HAL/AVR/fastio.h +++ b/Marlin/src/HAL/AVR/fastio.h @@ -57,7 +57,7 @@ * * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html */ #define _READ(IO) TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN) diff --git a/Marlin/src/HAL/DUE/Tone.cpp b/Marlin/src/HAL/DUE/Tone.cpp index 9b580b8b4..44bb52b42 100644 --- a/Marlin/src/HAL/DUE/Tone.cpp +++ b/Marlin/src/HAL/DUE/Tone.cpp @@ -24,7 +24,7 @@ /** * Description: Tone function for Arduino Due and compatible (SAM3X8E) - * Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012 + * Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012 */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/fastio.h b/Marlin/src/HAL/DUE/fastio.h index 01abd8204..ba801b5b7 100644 --- a/Marlin/src/HAL/DUE/fastio.h +++ b/Marlin/src/HAL/DUE/fastio.h @@ -58,7 +58,7 @@ * * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html */ // Read a pin diff --git a/Marlin/src/HAL/DUE/usb/arduino_due_x.h b/Marlin/src/HAL/DUE/usb/arduino_due_x.h index 7355f74f6..b5be62179 100644 --- a/Marlin/src/HAL/DUE/usb/arduino_due_x.h +++ b/Marlin/src/HAL/DUE/usb/arduino_due_x.h @@ -43,7 +43,7 @@ #pragma once /** - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ /** diff --git a/Marlin/src/HAL/DUE/usb/compiler.h b/Marlin/src/HAL/DUE/usb/compiler.h index 33df080e2..7b746543c 100644 --- a/Marlin/src/HAL/DUE/usb/compiler.h +++ b/Marlin/src/HAL/DUE/usb/compiler.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef UTILS_COMPILER_H diff --git a/Marlin/src/HAL/DUE/usb/conf_access.h b/Marlin/src/HAL/DUE/usb/conf_access.h index fdac1ab7e..f40168522 100644 --- a/Marlin/src/HAL/DUE/usb/conf_access.h +++ b/Marlin/src/HAL/DUE/usb/conf_access.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _CONF_ACCESS_H_ diff --git a/Marlin/src/HAL/DUE/usb/conf_clock.h b/Marlin/src/HAL/DUE/usb/conf_clock.h index d0f68500a..97e70e99a 100644 --- a/Marlin/src/HAL/DUE/usb/conf_clock.h +++ b/Marlin/src/HAL/DUE/usb/conf_clock.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef CONF_CLOCK_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/conf_usb.h b/Marlin/src/HAL/DUE/usb/conf_usb.h index 8d5924d37..697314212 100644 --- a/Marlin/src/HAL/DUE/usb/conf_usb.h +++ b/Marlin/src/HAL/DUE/usb/conf_usb.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _CONF_USB_H_ diff --git a/Marlin/src/HAL/DUE/usb/ctrl_access.c b/Marlin/src/HAL/DUE/usb/ctrl_access.c index 0ec14e0b8..99f97f62c 100644 --- a/Marlin/src/HAL/DUE/usb/ctrl_access.c +++ b/Marlin/src/HAL/DUE/usb/ctrl_access.c @@ -53,7 +53,7 @@ * ******************************************************************************/ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/ctrl_access.h b/Marlin/src/HAL/DUE/usb/ctrl_access.h index af6c8ceb9..b33839076 100644 --- a/Marlin/src/HAL/DUE/usb/ctrl_access.h +++ b/Marlin/src/HAL/DUE/usb/ctrl_access.h @@ -53,7 +53,7 @@ * ******************************************************************************/ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ diff --git a/Marlin/src/HAL/DUE/usb/genclk.h b/Marlin/src/HAL/DUE/usb/genclk.h index 895aba035..cde03bc0d 100644 --- a/Marlin/src/HAL/DUE/usb/genclk.h +++ b/Marlin/src/HAL/DUE/usb/genclk.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef CHIP_GENCLK_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/mrepeat.h b/Marlin/src/HAL/DUE/usb/mrepeat.h index 5a2017be9..8363d9cde 100644 --- a/Marlin/src/HAL/DUE/usb/mrepeat.h +++ b/Marlin/src/HAL/DUE/usb/mrepeat.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _MREPEAT_H_ diff --git a/Marlin/src/HAL/DUE/usb/osc.h b/Marlin/src/HAL/DUE/usb/osc.h index 3a9543507..953bcbbed 100644 --- a/Marlin/src/HAL/DUE/usb/osc.h +++ b/Marlin/src/HAL/DUE/usb/osc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef CHIP_OSC_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/pll.h b/Marlin/src/HAL/DUE/usb/pll.h index d3d217487..8eaf27672 100644 --- a/Marlin/src/HAL/DUE/usb/pll.h +++ b/Marlin/src/HAL/DUE/usb/pll.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef CHIP_PLL_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/preprocessor.h b/Marlin/src/HAL/DUE/usb/preprocessor.h index 184c03ae7..c12d01cb6 100644 --- a/Marlin/src/HAL/DUE/usb/preprocessor.h +++ b/Marlin/src/HAL/DUE/usb/preprocessor.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _PREPROCESSOR_H_ diff --git a/Marlin/src/HAL/DUE/usb/sbc_protocol.h b/Marlin/src/HAL/DUE/usb/sbc_protocol.h index 082b735fa..ab845739f 100644 --- a/Marlin/src/HAL/DUE/usb/sbc_protocol.h +++ b/Marlin/src/HAL/DUE/usb/sbc_protocol.h @@ -52,7 +52,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _SBC_PROTOCOL_H_ #define _SBC_PROTOCOL_H_ diff --git a/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h b/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h index 6df82c146..d77e4f952 100644 --- a/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h +++ b/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h @@ -42,7 +42,7 @@ * ******************************************************************************/ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ diff --git a/Marlin/src/HAL/DUE/usb/spc_protocol.h b/Marlin/src/HAL/DUE/usb/spc_protocol.h index 6fadb9f36..d67cc5c78 100644 --- a/Marlin/src/HAL/DUE/usb/spc_protocol.h +++ b/Marlin/src/HAL/DUE/usb/spc_protocol.h @@ -45,7 +45,7 @@ */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _SPC_PROTOCOL_H_ #define _SPC_PROTOCOL_H_ diff --git a/Marlin/src/HAL/DUE/usb/stringz.h b/Marlin/src/HAL/DUE/usb/stringz.h index b914b7348..fc9aaf38a 100644 --- a/Marlin/src/HAL/DUE/usb/stringz.h +++ b/Marlin/src/HAL/DUE/usb/stringz.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _STRINGZ_H_ diff --git a/Marlin/src/HAL/DUE/usb/sysclk.c b/Marlin/src/HAL/DUE/usb/sysclk.c index 899244dd8..cbb4e2c9e 100644 --- a/Marlin/src/HAL/DUE/usb/sysclk.c +++ b/Marlin/src/HAL/DUE/usb/sysclk.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/sysclk.h b/Marlin/src/HAL/DUE/usb/sysclk.h index 48c99de29..16db8c86d 100644 --- a/Marlin/src/HAL/DUE/usb/sysclk.h +++ b/Marlin/src/HAL/DUE/usb/sysclk.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef CHIP_SYSCLK_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/tpaste.h b/Marlin/src/HAL/DUE/usb/tpaste.h index f8ec44a41..2ad3f2758 100644 --- a/Marlin/src/HAL/DUE/usb/tpaste.h +++ b/Marlin/src/HAL/DUE/usb/tpaste.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _TPASTE_H_ diff --git a/Marlin/src/HAL/DUE/usb/udc.c b/Marlin/src/HAL/DUE/usb/udc.c index 048a902d3..60bf0cfff 100644 --- a/Marlin/src/HAL/DUE/usb/udc.c +++ b/Marlin/src/HAL/DUE/usb/udc.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/udc.h b/Marlin/src/HAL/DUE/usb/udc.h index 885bdf04d..8d92eb5c0 100644 --- a/Marlin/src/HAL/DUE/usb/udc.h +++ b/Marlin/src/HAL/DUE/usb/udc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDC_H_ diff --git a/Marlin/src/HAL/DUE/usb/udc_desc.h b/Marlin/src/HAL/DUE/usb/udc_desc.h index 88ed08a96..052ca08ec 100644 --- a/Marlin/src/HAL/DUE/usb/udc_desc.h +++ b/Marlin/src/HAL/DUE/usb/udc_desc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDC_DESC_H_ diff --git a/Marlin/src/HAL/DUE/usb/udd.h b/Marlin/src/HAL/DUE/usb/udd.h index c87763de2..7ec8c03de 100644 --- a/Marlin/src/HAL/DUE/usb/udd.h +++ b/Marlin/src/HAL/DUE/usb/udd.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDD_H_ diff --git a/Marlin/src/HAL/DUE/usb/udi.h b/Marlin/src/HAL/DUE/usb/udi.h index 709908cad..febf03b71 100644 --- a/Marlin/src/HAL/DUE/usb/udi.h +++ b/Marlin/src/HAL/DUE/usb/udi.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDI_H_ diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc.c b/Marlin/src/HAL/DUE/usb/udi_cdc.c index 60c9546ce..cbe23dbb6 100644 --- a/Marlin/src/HAL/DUE/usb/udi_cdc.c +++ b/Marlin/src/HAL/DUE/usb/udi_cdc.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc.h b/Marlin/src/HAL/DUE/usb/udi_cdc.h index 526419c86..0ecf7bb00 100644 --- a/Marlin/src/HAL/DUE/usb/udi_cdc.h +++ b/Marlin/src/HAL/DUE/usb/udi_cdc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDI_CDC_H_ @@ -701,7 +701,7 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s * another "Composite Device" module, like "USB HID Mouse (Composite Device)". * * Also, you can refer to application note - * + * * AVR4902 ASF - USB Composite Device. * * \section udi_cdc_use_case_composite_setup Setup steps diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h b/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h index cbd3eb00a..d406a8774 100644 --- a/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h +++ b/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDI_CDC_CONF_H_ diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c b/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c index 8f730ba82..97c334e2a 100644 --- a/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c +++ b/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/udi_composite_desc.c b/Marlin/src/HAL/DUE/usb/udi_composite_desc.c index 07bdd1b9d..da74fbe60 100644 --- a/Marlin/src/HAL/DUE/usb/udi_composite_desc.c +++ b/Marlin/src/HAL/DUE/usb/udi_composite_desc.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/udi_msc.c b/Marlin/src/HAL/DUE/usb/udi_msc.c index 627bca0d4..b7c3bb5ea 100644 --- a/Marlin/src/HAL/DUE/usb/udi_msc.c +++ b/Marlin/src/HAL/DUE/usb/udi_msc.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/udi_msc.h b/Marlin/src/HAL/DUE/usb/udi_msc.h index c632ee4aa..730dbc8ee 100644 --- a/Marlin/src/HAL/DUE/usb/udi_msc.h +++ b/Marlin/src/HAL/DUE/usb/udi_msc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDI_MSC_H_ @@ -290,7 +290,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size, * another "Composite Device" module, like "USB HID Mouse (Composite Device)". * * Also, you can refer to application note - * + * * AVR4902 ASF - USB Composite Device. * * \section udi_msc_use_case_composite_setup Setup steps diff --git a/Marlin/src/HAL/DUE/usb/uotghs_device_due.c b/Marlin/src/HAL/DUE/usb/uotghs_device_due.c index 2a10190c7..e13232a39 100644 --- a/Marlin/src/HAL/DUE/usb/uotghs_device_due.c +++ b/Marlin/src/HAL/DUE/usb/uotghs_device_due.c @@ -42,7 +42,7 @@ */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/uotghs_device_due.h b/Marlin/src/HAL/DUE/usb/uotghs_device_due.h index 97877994b..6df26d63d 100644 --- a/Marlin/src/HAL/DUE/usb/uotghs_device_due.h +++ b/Marlin/src/HAL/DUE/usb/uotghs_device_due.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef UOTGHS_DEVICE_DUE_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/uotghs_otg.h b/Marlin/src/HAL/DUE/usb/uotghs_otg.h index 86c903b2c..eca5e938b 100644 --- a/Marlin/src/HAL/DUE/usb/uotghs_otg.h +++ b/Marlin/src/HAL/DUE/usb/uotghs_otg.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef UOTGHS_OTG_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol.h b/Marlin/src/HAL/DUE/usb/usb_protocol.h index 31c783f97..ea51a8689 100644 --- a/Marlin/src/HAL/DUE/usb/usb_protocol.h +++ b/Marlin/src/HAL/DUE/usb/usb_protocol.h @@ -44,7 +44,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _USB_PROTOCOL_H_ diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h b/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h index 49fc7387e..d594db52e 100644 --- a/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h +++ b/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _USB_PROTOCOL_CDC_H_ #define _USB_PROTOCOL_CDC_H_ diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h b/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h index db8f9cafd..0fef30804 100644 --- a/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h +++ b/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _USB_PROTOCOL_MSC_H_ diff --git a/Marlin/src/HAL/DUE/usb/usb_task.c b/Marlin/src/HAL/DUE/usb/usb_task.c index 29d02faef..66bdb265d 100644 --- a/Marlin/src/HAL/DUE/usb/usb_task.c +++ b/Marlin/src/HAL/DUE/usb/usb_task.c @@ -41,7 +41,7 @@ * */ -// Support and FAQ: visit Atmel Support +// Support and FAQ: visit Atmel Support #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/usb_task.h b/Marlin/src/HAL/DUE/usb/usb_task.h index fad62fda5..e9831ae06 100644 --- a/Marlin/src/HAL/DUE/usb/usb_task.h +++ b/Marlin/src/HAL/DUE/usb/usb_task.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _USB_TASK_H_ diff --git a/Marlin/src/HAL/LINUX/fastio.h b/Marlin/src/HAL/LINUX/fastio.h index 8b0526710..08dca7780 100644 --- a/Marlin/src/HAL/LINUX/fastio.h +++ b/Marlin/src/HAL/LINUX/fastio.h @@ -44,7 +44,7 @@ * * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html */ /// Read a pin diff --git a/Marlin/src/HAL/LPC1768/fastio.h b/Marlin/src/HAL/LPC1768/fastio.h index 8e8e66db7..1772881b3 100644 --- a/Marlin/src/HAL/LPC1768/fastio.h +++ b/Marlin/src/HAL/LPC1768/fastio.h @@ -56,7 +56,7 @@ * * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html */ /// Read a pin diff --git a/Marlin/src/HAL/STM32F1/SPI.cpp b/Marlin/src/HAL/STM32F1/SPI.cpp index 8eb8f9aa8..1cd064c35 100644 --- a/Marlin/src/HAL/STM32F1/SPI.cpp +++ b/Marlin/src/HAL/STM32F1/SPI.cpp @@ -216,7 +216,7 @@ void SPIClass::setDataMode(uint8_t dataMode) { /** * Notes: * As far as we know the AVR numbers for dataMode match the numbers required by the STM32. - * From the AVR doc http://www.atmel.com/images/doc2585.pdf section 2.4 + * From the AVR doc https://www.atmel.com/images/doc2585.pdf section 2.4 * * SPI Mode CPOL CPHA Shift SCK-edge Capture SCK-edge * 0 0 0 Falling Rising diff --git a/Marlin/src/HAL/TEENSY31_32/fastio.h b/Marlin/src/HAL/TEENSY31_32/fastio.h index e74920d49..5bfb8d3a0 100644 --- a/Marlin/src/HAL/TEENSY31_32/fastio.h +++ b/Marlin/src/HAL/TEENSY31_32/fastio.h @@ -39,7 +39,7 @@ * * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html */ #define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK) diff --git a/Marlin/src/HAL/TEENSY35_36/fastio.h b/Marlin/src/HAL/TEENSY35_36/fastio.h index e74920d49..5bfb8d3a0 100644 --- a/Marlin/src/HAL/TEENSY35_36/fastio.h +++ b/Marlin/src/HAL/TEENSY35_36/fastio.h @@ -39,7 +39,7 @@ * * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html */ #define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK) diff --git a/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp b/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp index 207cd56aa..f524673ec 100644 --- a/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp +++ b/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp @@ -4,7 +4,7 @@ * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this - * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * file, You can obtain one at https://mozilla.org/MPL/2.0/. * * This library was modified, some bugs fixed, stack address validated * and adapted to be used in Marlin 3D printer firmware as backtracer diff --git a/Marlin/src/feature/dac/dac_mcp4728.cpp b/Marlin/src/feature/dac/dac_mcp4728.cpp index 39f873f0c..cfb4dc462 100644 --- a/Marlin/src/feature/dac/dac_mcp4728.cpp +++ b/Marlin/src/feature/dac/dac_mcp4728.cpp @@ -24,7 +24,7 @@ * mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter * * For implementation details, please take a look at the datasheet: - * http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf + * https://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf * * For discussion and feedback, please go to: * http://arduino.cc/forum/index.php/topic,51842.0.html diff --git a/Marlin/src/gcode/motion/G5.cpp b/Marlin/src/gcode/motion/G5.cpp index 5d289e11d..89b45ce8f 100644 --- a/Marlin/src/gcode/motion/G5.cpp +++ b/Marlin/src/gcode/motion/G5.cpp @@ -29,7 +29,7 @@ /** * Parameters interpreted according to: - * http://linuxcnc.org/docs/2.6/html/gcode/parser.html#sec:G5-Cubic-Spline + * https://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G5-Cubic-Spline * However I, J omission is not supported at this point; all * parameters can be omitted and default to zero. */ diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h index 854b8897b..68fc06f52 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h @@ -125,11 +125,11 @@ /* * Settings for the 4D Systems, 4.3" Embedded SPI Display 480x272, SPI, FT800 (4DLCD-FT843) * - * http://www.4dsystems.com.au/product/4DLCD_FT843/ + * https://4dsystems.com.au/4dlcd-ft843 * * Datasheet: * - * http://www.4dsystems.com.au/productpages/4DLCD-FT843/downloads/FT843-4.3-Display_datasheet_R_1_2.pdf + * https://4dsystems.com.au/mwdownloads/download/link/id/52/ * */ @@ -157,7 +157,7 @@ * * Datasheet: * - * http://www.hantronix.com/files/data/s1501799605s500-gh7.pdf + * https://www.hantronix.com/files/data/s1501799605s500-gh7.pdf * */ #elif defined(LCD_ALEPHOBJECTS_CLCD_UI) diff --git a/Marlin/src/module/scara.cpp b/Marlin/src/module/scara.cpp index 5fbbfd65a..0bb8757a6 100644 --- a/Marlin/src/module/scara.cpp +++ b/Marlin/src/module/scara.cpp @@ -100,7 +100,7 @@ void inverse_kinematics(const xyz_pos_t &raw) { /** * Morgan SCARA Inverse Kinematics. Results in 'delta'. * - * See http://forums.reprap.org/read.php?185,283327 + * See https://reprap.org/forum/read.php?185,283327 * * Maths and first version by QHARLEY. * Integrated into Marlin and slightly restructured by Joachim Cerny. diff --git a/Marlin/src/module/thermistor/thermistor_2.h b/Marlin/src/module/thermistor/thermistor_2.h index f3fe47060..efd64194d 100644 --- a/Marlin/src/module/thermistor/thermistor_2.h +++ b/Marlin/src/module/thermistor/thermistor_2.h @@ -23,7 +23,7 @@ // // R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2 -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance // const short temptable_2[][2] PROGMEM = { diff --git a/Marlin/src/module/thermistor/thermistor_5.h b/Marlin/src/module/thermistor/thermistor_5.h index 8f414de15..2f7208260 100644 --- a/Marlin/src/module/thermistor/thermistor_5.h +++ b/Marlin/src/module/thermistor/thermistor_5.h @@ -24,7 +24,7 @@ // R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up // 100k ParCan thermistor (104GT-2) // ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan) -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance const short temptable_5[][2] PROGMEM = { { OV( 1), 713 }, diff --git a/Marlin/src/module/thermistor/thermistor_52.h b/Marlin/src/module/thermistor/thermistor_52.h index 9a54ef4b6..29832d750 100644 --- a/Marlin/src/module/thermistor/thermistor_52.h +++ b/Marlin/src/module/thermistor/thermistor_52.h @@ -23,7 +23,7 @@ // R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up, // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance // Advantage: More resolution and better linearity from 150C to 200C const short temptable_52[][2] PROGMEM = { diff --git a/Marlin/src/module/thermistor/thermistor_55.h b/Marlin/src/module/thermistor/thermistor_55.h index ead481e86..54fe1be89 100644 --- a/Marlin/src/module/thermistor/thermistor_55.h +++ b/Marlin/src/module/thermistor/thermistor_55.h @@ -23,7 +23,7 @@ // R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up, // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance // Advantage: More resolution and better linearity from 150C to 200C const short temptable_55[][2] PROGMEM = { diff --git a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h index 8b035e887..c74e1b72e 100644 --- a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h +++ b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h @@ -23,7 +23,7 @@ /** * Alligator Board R2 - * http://www.3dartists.org/ + * https://reprap.org/wiki/Alligator_Board */ #ifndef __SAM3X8E__ diff --git a/Marlin/src/pins/sanguino/pins_OMCA.h b/Marlin/src/pins/sanguino/pins_OMCA.h index 774910bd7..6d9d0f250 100644 --- a/Marlin/src/pins/sanguino/pins_OMCA.h +++ b/Marlin/src/pins/sanguino/pins_OMCA.h @@ -49,7 +49,7 @@ * PWM (D 14) PD6 20| |21 PD7 (D 15) PWM * +--------+ * - * REF http://sanguino.cc/hardware + * REF http://sanguino.wikidot.com/hardware */ /** @@ -70,7 +70,7 @@ * * When installing select 1.0.2 * - * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Installation instructions can be found at http://learn.sparkfun.com/pages/CustomBoardsArduino * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. diff --git a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h index 170b90368..524f4892b 100644 --- a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h +++ b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h @@ -23,7 +23,7 @@ /** * STM32F407VET6 with RAMPS-like shield - * 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407 + * 'Black' STM32F407VET6 board - https://www.stm32duino.com/viewtopic.php?t=485 * Shield - https://github.com/jmz52/Hardware */ diff --git a/Marlin/src/sd/SdFatStructs.h b/Marlin/src/sd/SdFatStructs.h index 0412852cd..b09a6d289 100644 --- a/Marlin/src/sd/SdFatStructs.h +++ b/Marlin/src/sd/SdFatStructs.h @@ -39,7 +39,7 @@ /** * mostly from Microsoft document fatgen103.doc - * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx + * https://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx */ uint8_t const BOOTSIG0 = 0x55, // Value for byte 510 of boot block or MBR diff --git a/Marlin/src/sd/SdInfo.h b/Marlin/src/sd/SdInfo.h index 9d6674dfa..61d2804dd 100644 --- a/Marlin/src/sd/SdInfo.h +++ b/Marlin/src/sd/SdInfo.h @@ -39,7 +39,7 @@ // Version 3.01 // May 18, 2010 // -// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs +// https://www.sdcard.org/downloads/pls/index.html // SD card commands uint8_t const CMD0 = 0x00, // GO_IDLE_STATE - init card in spi mode if CS low diff --git a/README.md b/README.md index 0ff486589..17f3e3ea0 100644 --- a/README.md +++ b/README.md @@ -66,7 +66,7 @@ The current Marlin dev team consists of: - Chris Pepper [[@p3p](https://github.com/p3p)] - UK - Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA - João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portugal - - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands   [![Flattr Erik](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software) + - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands   [![Flattr Erik](https://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software) ## License diff --git a/buildroot/etc/udev/rules.d/99-platformio-udev.rules b/buildroot/etc/udev/rules.d/99-platformio-udev.rules index 6daaf922b..3c829882d 100644 --- a/buildroot/etc/udev/rules.d/99-platformio-udev.rules +++ b/buildroot/etc/udev/rules.d/99-platformio-udev.rules @@ -4,7 +4,7 @@ # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # -# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, @@ -16,7 +16,7 @@ # # INSTALLATION # -# Please visit > http://docs.platformio.org/en/latest/faq.html#platformio-udev-rules +# Please visit > https://docs.platformio.org/en/latest/faq.html#platformio-udev-rules # ##################################################################################### diff --git a/buildroot/share/PlatformIO/boards/BigTree_Btt002.json b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json index 2fbf5ae8a..6137aa694 100644 --- a/buildroot/share/PlatformIO/boards/BigTree_Btt002.json +++ b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json @@ -41,6 +41,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/en/microcontrollers/stm32f407ve.html", + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407vg.html", "vendor": "Generic" } diff --git a/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json b/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json index a949e00a3..dbbe8c8a6 100644 --- a/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json +++ b/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json @@ -41,6 +41,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/en/microcontrollers/stm32f407zg.html", + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407zg.html", "vendor": "Generic" } diff --git a/buildroot/share/PlatformIO/boards/FLYF407ZG.json b/buildroot/share/PlatformIO/boards/FLYF407ZG.json index 944dc7a9d..87a533be6 100644 --- a/buildroot/share/PlatformIO/boards/FLYF407ZG.json +++ b/buildroot/share/PlatformIO/boards/FLYF407ZG.json @@ -60,6 +60,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html", + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ZG.html", "vendor": "Generic" } diff --git a/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json b/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json index c55d7cc80..33f688e06 100644 --- a/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json +++ b/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json @@ -60,6 +60,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/en/microcontrollers/stm32f407ve.html", + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ve.html", "vendor": "Generic" } diff --git a/buildroot/share/PlatformIO/boards/malyanM200.json b/buildroot/share/PlatformIO/boards/malyanM200.json index dc0cf51f9..eea7c13c0 100644 --- a/buildroot/share/PlatformIO/boards/malyanM200.json +++ b/buildroot/share/PlatformIO/boards/malyanM200.json @@ -31,6 +31,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html", + "url": "https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html", "vendor": "Generic" } diff --git a/buildroot/share/fonts/README.md b/buildroot/share/fonts/README.md index 4e6f6f9b1..05d1adc85 100644 --- a/buildroot/share/fonts/README.md +++ b/buildroot/share/fonts/README.md @@ -5,7 +5,7 @@ The original author of the following font files is [A. Hardtung](https://github.com/AnHardt). Any copyright is dedicated to the Public Domain. -http://creativecommons.org/publicdomain/zero/1.0/ +https://creativecommons.org/publicdomain/zero/1.0/ - HD44780_C.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) - HD44780_J.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) @@ -20,4 +20,4 @@ Additional changes to the original font files distributed with Marlin are copyri ## Documentation -For detailed information about [adding new fonts](http://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website. +For detailed information about [adding new fonts](https://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website. diff --git a/buildroot/share/fonts/uxggenpages.md b/buildroot/share/fonts/uxggenpages.md index 314b5d5c0..5e40c392f 100644 --- a/buildroot/share/fonts/uxggenpages.md +++ b/buildroot/share/fonts/uxggenpages.md @@ -99,12 +99,12 @@ At this time, the font file `marlin-6x12-3.bdf` is used to generate the font dat - [WQY](http://wenq.org/) - [WQY 9pt bitmap font](http://wenq.org/daily/wqy-bitmapfont-bdf-gb18030-nightly_build.tar.gz) -- [unifont (16x8 or 16x16)](http://unifoundry.com/unifont.html) +- [unifont (16x8 or 16x16)](https://unifoundry.com/unifont.html) Documents related to the old version of the language engine: -- [Marlin Fonts Documentation](http://www.marlinfw.org/docs/development/fonts.html) -- [Marlin LCD Language](http://marlinfw.org/docs/development/lcd_language.html) +- [Marlin Fonts Documentation](https://www.marlinfw.org/docs/development/fonts.html) +- [Marlin LCD Language](https://marlinfw.org/docs/development/lcd_language.html) - [U8GLIB](https://github.com/olikraus/u8glib.git) - [UTF-8 for U8GLIB](https://github.com/yhfudev/u8glib-fontutf8.git) - [Standalone test project for the Marlin UTF-8 language engine](https://github.com/yhfudev/marlin-fontutf8.git) diff --git a/buildroot/share/scripts/createTemperatureLookupMarlin.py b/buildroot/share/scripts/createTemperatureLookupMarlin.py index 03450bc0e..b2d8964f5 100755 --- a/buildroot/share/scripts/createTemperatureLookupMarlin.py +++ b/buildroot/share/scripts/createTemperatureLookupMarlin.py @@ -2,10 +2,10 @@ """Thermistor Value Lookup Table Generator Generates lookup to temperature values for use in a microcontroller in C format based on: -http://en.wikipedia.org/wiki/Steinhart-Hart_equation +https://en.wikipedia.org/wiki/Steinhart-Hart_equation The main use is for Arduino programs that read data from the circuit board described here: -http://reprap.org/wiki/Temperature_Sensor_v2.0 +https://reprap.org/wiki/Temperature_Sensor_v2.0 Usage: python createTemperatureLookupMarlin.py [options] diff --git a/platformio.ini b/platformio.ini index 702f52db0..91cdd739f 100644 --- a/platformio.ini +++ b/platformio.ini @@ -647,7 +647,7 @@ upload_protocol = serial # # STM32F407VET6 with RAMPS-like shield -# 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407 +# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407 # Shield - https://github.com/jmz52/Hardware # [env:STM32F407VE_black]