diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 7af1d830b..c903d9523 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -401,7 +401,7 @@ #define LULZBOT_M115_EXTRUDER_TYPE "H175" #elif defined(TOOLHEAD_M175) #undef LULZBOT_M115_EXTRUDER_TYPE - #define LULZBOT_M115_EXTRUDER_TYPE "M175" + #define LULZBOT_M115_EXTRUDER_TYPE "M175v2" #elif defined(TOOLHEAD_SK175) #undef LULZBOT_M115_EXTRUDER_TYPE #define LULZBOT_M115_EXTRUDER_TYPE "SK175" @@ -843,55 +843,107 @@ // Set/get with gcode: M301 E[extruder number, 0-2] // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - #if ENABLED(LULZBOT_UNIVERSAL_TOOLHEAD) - #if ANY(Sidekick_289, Sidekick_747) - // SK Tool heads (30W) - #define LULZBOT_DEFAULT_Kp 26.47 - #define LULZBOT_DEFAULT_Ki 2.32 - #define LULZBOT_DEFAULT_Kd 75.56 - #else - // E3D Titan Aero with LulzBot V6 block - #define LULZBOT_DEFAULT_Kp 21.0 - #define LULZBOT_DEFAULT_Ki 1.78 - #define LULZBOT_DEFAULT_Kd 61.93 - #endif - #endif - #if ANY(TOOLHEAD_SL_SE_HE, LULZBOT_E3D_Titan_Aero_V6) // Used when LCD is not installed - #define LULZBOT_DEFAULT_Kp 21.0 - #define LULZBOT_DEFAULT_Ki 1.78 - #define LULZBOT_DEFAULT_Kd 61.93 - #elif ENABLED(TOOLHEAD_SK175) - #define LULZBOT_DEFAULT_Kp 26.47 - #define LULZBOT_DEFAULT_Ki 2.32 - #define LULZBOT_DEFAULT_Kd 75.56 - #elif ENABLED(TOOLHEAD_SK285) - #define LULZBOT_DEFAULT_Kp 26.47 - #define LULZBOT_DEFAULT_Ki 2.32 - #define LULZBOT_DEFAULT_Kd 75.56 - #elif ENABLED(TOOLHEAD_H175) - #define LULZBOT_DEFAULT_Kp 27.58 - #define LULZBOT_DEFAULT_Ki 3.22 - #define LULZBOT_DEFAULT_Kd 65.66 - #elif ENABLED(TOOLHEAD_M175) - #define LULZBOT_DEFAULT_Kp 24.54 - #define LULZBOT_DEFAULT_Ki 2.52 - #define LULZBOT_DEFAULT_Kd 61.75 - #elif ANY(TOOLHEAD_HS_HSPLUS) - #define LULZBOT_DEFAULT_Kp 37.55 - #define LULZBOT_DEFAULT_Ki 5.39 - #define LULZBOT_DEFAULT_Kd 65.36 - #endif + //TAZ 6 Single Extruder (W) + #define TAZ6_STD_DEFAULT_Kp 28.79 //used to define stock PID. NOTE: if values are changed, both sets need to be changed. + #define TAZ6_STD_DEFAULT_Ki 1.91 //NOTE: if values are changed, both sets need to be changed. + #define TAZ6_STD_DEFAULT_Kd 108.51 + #define charTAZ6_STD_DEFAULT_Kp "28.79" //used in the tool head menu gcode. + #define charTAZ6_STD_DEFAULT_Ki "1.91" + #define charTAZ6_STD_DEFAULT_Kd "108.51" + + // E3D Titan Aero with LulzBot V6 block (40W) + #define SLSEHE_DEFAULT_Kp 21.0 //NOTE: if values are changed, both sets need to be changed. + #define SLSEHE_DEFAULT_Ki 1.78 + #define SLSEHE_DEFAULT_Kd 61.93 + #define charSLSEHE_DEFAULT_Kp "21.0" + #define charSLSEHE_DEFAULT_Ki "1.78" + #define charSLSEHE_DEFAULT_Kd "61.93" + + // SK175 Tool head (30W) + #define SK175_DEFAULT_Kp 26.47 //NOTE: if values are changed, both sets need to be changed. + #define SK175_DEFAULT_Ki 2.32 + #define SK175_DEFAULT_Kd 75.56 + #define charSK175_DEFAULT_Kp "26.47" + #define charSK175_DEFAULT_Ki "2.32" + #define charSK175_DEFAULT_Kd "75.56" + + // SK285 Tool head (30W) + #define SK285_DEFAULT_Kp 26.90 //NOTE: if values are changed, both sets need to be changed. + #define SK285_DEFAULT_Ki 2.41 + #define SK285_DEFAULT_Kd 75.19 + #define charSK285_DEFAULT_Kp "26.90" + #define charSK285_DEFAULT_Ki "2.41" + #define charSK285_DEFAULT_Kd "75.19" + + // H175 Tool head (40W) + #define H175_DEFAULT_Kp 27.58 //NOTE: if values are changed, both sets need to be changed. + #define H175_DEFAULT_Ki 3.22 + #define H175_DEFAULT_Kd 65.66 + #define charH175_DEFAULT_Kp "27.58" + #define charH175_DEFAULT_Ki "3.22" + #define charH175_DEFAULT_Kd "65.66" + + // M175 Tool head (50W) + #define M175_DEFAULT_Kp 22.12 //NOTE: if values are changed, both sets need to be changed. + #define M175_DEFAULT_Ki 1.94 + #define M175_DEFAULT_Kd 63.59 + #define charM175_DEFAULT_Kp "22.12" + #define charM175_DEFAULT_Ki "1.94" + #define charM175_DEFAULT_Kd "63.59" + + // HS & HSPLUS Tool heads + #define HSHSPLUS_DEFAULT_Kp 37.55 //NOTE: if values are changed, both sets need to be changed. + #define HSHSPLUS_DEFAULT_Ki 5.39 + #define HSHSPLUS_DEFAULT_Kd 65.36 + #define charHSHSPLUS_DEFAULT_Kp "37.55" + #define charHSHSPLUS_DEFAULT_Ki "5.39" + #define charHSHSPLUS_DEFAULT_Kd "65.36" + #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. #define DEFAULT_Kp_LIST { 22.20, 22.20 } #define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #else - #define DEFAULT_Kp LULZBOT_DEFAULT_Kp - #define DEFAULT_Ki LULZBOT_DEFAULT_Ki - #define DEFAULT_Kd LULZBOT_DEFAULT_Kd + // Sets default PID based on which printer/toolhead is selected + #if ENABLED(TAZ6) // Taz 6 Standard toolhead + #define DEFAULT_Kp TAZ6_STD_DEFAULT_Kp + #define DEFAULT_Ki TAZ6_STD_DEFAULT_Ki + #define DEFAULT_Kd TAZ6_STD_DEFAULT_Kd + + #elif ANY(TOOLHEAD_SL_SE_HE, LULZBOT_E3D_Titan_Aero_V6, LULZBOT_UNIVERSAL_TOOLHEAD) + #define DEFAULT_Kp SLSEHE_DEFAULT_Kp + #define DEFAULT_Ki SLSEHE_DEFAULT_Ki + #define DEFAULT_Kd SLSEHE_DEFAULT_Kd + + #elif ENABLED(TOOLHEAD_SK175) + #define DEFAULT_Kp SK175_DEFAULT_Kp + #define DEFAULT_Ki SK175_DEFAULT_Ki + #define DEFAULT_Kd SK175_DEFAULT_Kd + + #elif ENABLED(TOOLHEAD_SK285) + #define DEFAULT_Kp SK285_DEFAULT_Kp + #define DEFAULT_Ki SK285_DEFAULT_Ki + #define DEFAULT_Kd SK285_DEFAULT_Kd + + #elif ENABLED(TOOLHEAD_H175) + #define DEFAULT_Kp H175_DEFAULT_Kp + #define DEFAULT_Ki H175_DEFAULT_Ki + #define DEFAULT_Kd H175_DEFAULT_Kd + + #elif ENABLED(TOOLHEAD_M175) + #define DEFAULT_Kp M175_DEFAULT_Kp + #define DEFAULT_Ki M175_DEFAULT_Ki + #define DEFAULT_Kd M175_DEFAULT_Kd + + #elif ANY(TOOLHEAD_HS_HSPLUS) + #define DEFAULT_Kp HSHSPLUS_DEFAULT_Kp + #define DEFAULT_Ki HSHSPLUS_DEFAULT_Ki + #define DEFAULT_Kd HSHSPLUS_DEFAULT_Kd + #endif #endif #endif // PIDTEMP diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 08b69c9a2..5542d95b8 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -3822,11 +3822,9 @@ #define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script #define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle - #if ANY(TAZ6) - #define DEFAULT_PID "P28.79I1.91D108.51" - #else - #define DEFAULT_PID "P21.0I1.78D61.93" - #endif + #define SK_DEFAULT_PID "26.90I2.41D75.19" + #define TAZ6_DEFAULT_PID "P28.79I1.91D108.51" + #define DEFAULT_PID "P21.0I1.78D61.93" #if ANY(TAZ6, Workhorse) //conversion to digipot units = ((mA-750)/5+135) #define E_CURRENT_Aero "160" //((875-750)/5+135) = 160 @@ -3839,58 +3837,58 @@ #if ANY(Sidekick_289, Sidekick_747) #define MAIN_MENU_ITEM_1_DESC "SK175|0.50mm|BRASS" - #define MAIN_MENU_ITEM_1_GCODE "M92E420\nM301P26.29I2.57D72.59\nM906E" E_CURRENT_Aero "\nM500\nM117 SK175|0.50mm|BRASS" + #define MAIN_MENU_ITEM_1_GCODE "M92E420\nM301P" charSK175_DEFAULT_Kp "I" charSK175_DEFAULT_Ki "D" charSK175_DEFAULT_Kd"\nM906E" E_CURRENT_Aero "\nM500\nM117 SK175|0.50mm|BRASS" #define MAIN_MENU_ITEM_2_DESC "SK285|0.50mm|BRASS" - #define MAIN_MENU_ITEM_2_GCODE "M92E420\nM301P26.90I2.41D75.19\nM906E" E_CURRENT_Aero "\nM500\nM117 SK285|0.50mm|BRASS" + #define MAIN_MENU_ITEM_2_GCODE "M92E420\nM301P" charSK285_DEFAULT_Kp "I" charSK285_DEFAULT_Ki "D" charSK285_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 SK285|0.50mm|BRASS" #endif #if DISABLED(TAZ6, Workhorse) #define MAIN_MENU_ITEM_3_DESC "M175v2|0.50mm|CRB CU" - #define MAIN_MENU_ITEM_3_GCODE "M92E415\nM301P24.54I2.52D61.75\nM906E" E_CURRENT_BMG "\nM500\nM117 M175v2|0.50mm|CRB CU" + #define MAIN_MENU_ITEM_3_GCODE "M92E415\nM301P" charM175_DEFAULT_Kp "I" charM175_DEFAULT_Ki "D" charM175_DEFAULT_Kd "\nM906E" E_CURRENT_BMG "\nM500\nM117 M175v2|0.50mm|CRB CU" #define MAIN_MENU_ITEM_4_DESC "SL|0.25mm|NKL-PL CU" - #define MAIN_MENU_ITEM_4_GCODE "M92E420\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 SL|0.25mm|NKL-PL CU" + #define MAIN_MENU_ITEM_4_GCODE "M92E420\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 SL|0.25mm|NKL-PL CU" #define MAIN_MENU_ITEM_5_DESC "SE|0.50mm|NKL-PL CU" - #define MAIN_MENU_ITEM_5_GCODE "M92E420\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 SE|0.50mm|NKL-PL CU" + #define MAIN_MENU_ITEM_5_GCODE "M92E420\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 SE|0.50mm|NKL-PL CU" #define MAIN_MENU_ITEM_6_DESC "HE|0.50mm|HRD STEEL" - #define MAIN_MENU_ITEM_6_GCODE "M92E420\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 HE|0.50mm|HRD STEEL" + #define MAIN_MENU_ITEM_6_GCODE "M92E420\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 HE|0.50mm|HRD STEEL" #define MAIN_MENU_ITEM_7_DESC "HS|0.80mm|HRD STEEL" - #define MAIN_MENU_ITEM_7_GCODE "M92E420\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 HS|0.80mm|HRD STEEL" + #define MAIN_MENU_ITEM_7_GCODE "M92E420\nM301P" charHSHSPLUS_DEFAULT_Kp "I" charHSHSPLUS_DEFAULT_Ki "D" charHSHSPLUS_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 HS|0.80mm|HRD STEEL" #define MAIN_MENU_ITEM_8_DESC "HS+|1.20mm|HRD STEEL" - #define MAIN_MENU_ITEM_8_GCODE "M92E420\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 HS+|1.20mm|HRD STEEL" + #define MAIN_MENU_ITEM_8_GCODE "M92E420\nM301P" charHSHSPLUS_DEFAULT_Kp "I" charHSHSPLUS_DEFAULT_Ki "D" charHSHSPLUS_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 HS+|1.20mm|HRD STEEL" #define MAIN_MENU_ITEM_9_DESC "H175|0.50mm|NKL-PL CU" - #define MAIN_MENU_ITEM_9_GCODE "M92E409\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 H175|0.50mm|NKL-PL CU" + #define MAIN_MENU_ITEM_9_GCODE "M92E409\nM301P" charH175_DEFAULT_Kp "I" charH175_DEFAULT_Ki "D" charH175_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 H175|0.50mm|NKL-PL CU" #else #define MAIN_MENU_ITEM_3_DESC "M175v2|0.50mm|CRB CU" - #define MAIN_MENU_ITEM_3_GCODE "M92E415\nM206Y0\nM301P24.54I2.52D61.75\nM907E" E_CURRENT_BMG "\nM500\nM117 M175v2|0.50mm|CRB CU" + #define MAIN_MENU_ITEM_3_GCODE "M92E415\nM206Y0\nM301P" charM175_DEFAULT_Kp "I" charM175_DEFAULT_Ki "D" charM175_DEFAULT_Kd "\nM907E" E_CURRENT_BMG "\nM500\nM117 M175v2|0.50mm|CRB CU" #define MAIN_MENU_ITEM_4_DESC "SL|0.25mm|NKL-PL CU" - #define MAIN_MENU_ITEM_4_GCODE "M92E420\nM206Y0\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Aero "\nM500\nM117 SL|0.25mm|NKL-PL CU" + #define MAIN_MENU_ITEM_4_GCODE "M92E420\nM206Y0\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM907E" E_CURRENT_Aero "\nM500\nM117 SL|0.25mm|NKL-PL CU" #define MAIN_MENU_ITEM_5_DESC "SE|0.50mm|NKL-PL CU" - #define MAIN_MENU_ITEM_5_GCODE "M92E420\nM206Y0\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Aero "\nM500\nM117 SE|0.50mm|NKL-PL CU" + #define MAIN_MENU_ITEM_5_GCODE "M92E420\nM206Y0\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM907E" E_CURRENT_Aero "\nM500\nM117 SE|0.50mm|NKL-PL CU" #define MAIN_MENU_ITEM_6_DESC "HE|0.50mm|HRD STEEL" - #define MAIN_MENU_ITEM_6_GCODE "M92E420\nM206Y0\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Aero "\nM500\nM117 HE|0.50mm|HRD STEEL" + #define MAIN_MENU_ITEM_6_GCODE "M92E420\nM206Y0\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM907E" E_CURRENT_Aero "\nM500\nM117 HE|0.50mm|HRD STEEL" #define MAIN_MENU_ITEM_7_DESC "HS|0.80mm|HRD STEEL" - #define MAIN_MENU_ITEM_7_GCODE "M92E420\nM206Y0\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Aero "\nM500\nM117 HS|0.80mm|HRD STEEL" + #define MAIN_MENU_ITEM_7_GCODE "M92E420\nM206Y0\nM301P" charHSHSPLUS_DEFAULT_Kp "I" charHSHSPLUS_DEFAULT_Ki "D" charHSHSPLUS_DEFAULT_Kd "\nM907E" E_CURRENT_Aero "\nM500\nM117 HS|0.80mm|HRD STEEL" #define MAIN_MENU_ITEM_8_DESC "HS+|1.20mm|HRD STEEL" - #define MAIN_MENU_ITEM_8_GCODE "M92E420\nM206Y0\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Aero "\nM500\nM117 HS+|1.20mm|HRD STEEL" + #define MAIN_MENU_ITEM_8_GCODE "M92E420\nM206Y0\nM301P" charHSHSPLUS_DEFAULT_Kp "I" charHSHSPLUS_DEFAULT_Ki "D" charHSHSPLUS_DEFAULT_Kd "\nM907E" E_CURRENT_Aero "\nM500\nM117 HS+|1.20mm|HRD STEEL" #define MAIN_MENU_ITEM_9_DESC "H175|0.50mm|NKL-PL CU" - #define MAIN_MENU_ITEM_9_GCODE "M92E409\nM206Y0\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 H175|0.50mm|NKL-PL CU" + #define MAIN_MENU_ITEM_9_GCODE "M92E409\nM206Y0\nM301P" charH175_DEFAULT_Kp "I" charH175_DEFAULT_Ki "D" charH175_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 H175|0.50mm|NKL-PL CU" #endif #if defined(TAZ6) #define MAIN_MENU_ITEM_1_DESC "Standard|0.5mm" - #define MAIN_MENU_ITEM_1_GCODE "M92E833\nM206Y4\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Std "\nM500\nM117 Standard|0.5mm" + #define MAIN_MENU_ITEM_1_GCODE "M92E833\nM206Y4\nM301P" charTAZ6_STD_DEFAULT_Kp "I" charTAZ6_STD_DEFAULT_Ki "D" charTAZ6_STD_DEFAULT_Kd "\nM907E" E_CURRENT_Std "\nM500\nM117 Standard|0.5mm" #endif #endif