Clean up after recent commits
This commit is contained in:
parent
fff50d3958
commit
90ccac4bcf
@ -223,16 +223,16 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
||||||
// pins_XXX.h file overrides this one
|
// pins_XXX.h file overrides this one
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
// and if CASE_LIGHT_DEFAULT is set to on
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1029,7 +1029,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -95,7 +95,7 @@
|
|||||||
#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers
|
#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers
|
||||||
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
|
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
|
||||||
#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D
|
#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D
|
||||||
#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica)
|
#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||||
|
|
||||||
#define MB(board) (MOTHERBOARD==BOARD_##board)
|
#define MB(board) (MOTHERBOARD==BOARD_##board)
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1022,7 +1020,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1022,7 +1020,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1031,7 +1029,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1022,7 +1020,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1006,7 +1004,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -236,16 +236,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1035,7 +1033,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1022,7 +1020,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1029,7 +1027,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1022,7 +1020,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1022,7 +1020,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1022,7 +1020,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1025,7 +1023,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1022,7 +1020,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1027,7 +1025,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1026,7 +1024,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1024,7 +1022,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1024,7 +1022,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -228,16 +228,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1029,7 +1027,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1024,7 +1022,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1031,7 +1029,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1022,7 +1020,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1022,7 +1020,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -223,16 +223,14 @@
|
|||||||
/**
|
/**
|
||||||
* M355 Case Light on-off / brightness
|
* M355 Case Light on-off / brightness
|
||||||
*/
|
*/
|
||||||
//#define CASE_LIGHT_ENABLE
|
//#define CASE_LIGHT_ENABLE
|
||||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||||
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board
|
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||||
// pins_XXX.h file overrides this one
|
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||||
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0
|
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||||
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off
|
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM
|
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||||
// and if CASE_LIGHT_DEFAULT is set to on
|
#endif
|
||||||
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================ Mechanical Settings ==========================
|
//============================ Mechanical Settings ==========================
|
||||||
@ -1025,7 +1023,7 @@
|
|||||||
*/
|
*/
|
||||||
#define TMC2130_ADV() { }
|
#define TMC2130_ADV() { }
|
||||||
|
|
||||||
#endif // ENABLED(HAVE_TMC2130)
|
#endif // HAVE_TMC2130
|
||||||
|
|
||||||
// @section L6470
|
// @section L6470
|
||||||
|
|
||||||
|
@ -183,7 +183,7 @@ void GCodeParser::parse(char *p) {
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
if (PARAM_TEST) {
|
if (PARAM_TEST) {
|
||||||
|
|
||||||
while (*p == ' ') p++; // skip spaces vetween parameters & values
|
while (*p == ' ') p++; // skip spaces vetween parameters & values
|
||||||
const bool has_num = DECIMAL_SIGNED(*p); // The parameter has a number [-+0-9.]
|
const bool has_num = DECIMAL_SIGNED(*p); // The parameter has a number [-+0-9.]
|
||||||
|
|
||||||
|
Loading…
Reference in New Issue
Block a user