CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Rename BEEPER to BEEPER_PIN

Browse Source 
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
This commit is contained in:
Scott Lahteine 2015-07-30 23:19:11 -07:00 committed by Richard Wackerbarth
parent b217474eab
commit 94a796c8cc
24 changed files with 58 additions and 58 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/Conditionals.h
View File

@ -512,7 +512,7 @@
#define WRITE_FAN(v) WRITE(FAN_PIN, v) #define WRITE_FAN(v) WRITE(FAN_PIN, v)
#endif #endif
#define HAS_BUZZER ((defined(BEEPER) && BEEPER >= 0) || defined(LCD_USE_I2C_BUZZER)) #define HAS_BUZZER (PIN_EXISTS(BEEPER) || defined(LCD_USE_I2C_BUZZER))
#if defined(NUM_SERVOS) && NUM_SERVOS > 0 #if defined(NUM_SERVOS) && NUM_SERVOS > 0
#ifndef X_ENDSTOP_SERVO_NR #ifndef X_ENDSTOP_SERVO_NR

14
Marlin/buzzer.cpp
View File

@ -7,22 +7,22 @@
if (freq > 0) { if (freq > 0) {
#if ENABLED(LCD_USE_I2C_BUZZER) #if ENABLED(LCD_USE_I2C_BUZZER)
lcd_buzz(duration, freq); lcd_buzz(duration, freq);
#elif defined(BEEPER) && BEEPER >= 0 // on-board buzzers have no further condition #elif PIN_EXISTS(BEEPER) // on-board buzzers have no further condition
SET_OUTPUT(BEEPER); SET_OUTPUT(BEEPER_PIN);
#ifdef SPEAKER // a speaker needs a AC ore a pulsed DC #ifdef SPEAKER // a speaker needs a AC ore a pulsed DC
//tone(BEEPER, freq, duration); // needs a PWMable pin //tone(BEEPER_PIN, freq, duration); // needs a PWMable pin
unsigned int delay = 1000000 / freq / 2; unsigned int delay = 1000000 / freq / 2;
int i = duration * freq / 1000; int i = duration * freq / 1000;
while (i--) { while (i--) {
WRITE(BEEPER,HIGH); WRITE(BEEPER_PIN, HIGH);
delayMicroseconds(delay); delayMicroseconds(delay);
WRITE(BEEPER,LOW); WRITE(BEEPER_PIN, LOW);
delayMicroseconds(delay); delayMicroseconds(delay);
} }
#else // buzzer has its own resonator - needs a DC #else // buzzer has its own resonator - needs a DC
WRITE(BEEPER, HIGH); WRITE(BEEPER_PIN, HIGH);
delay(duration); delay(duration);
WRITE(BEEPER, LOW); WRITE(BEEPER_PIN, LOW);
#endif #endif
#else #else
delay(duration); delay(duration);

6
Marlin/pins_3DRAG.h
View File

@ -30,8 +30,8 @@
#define HEATER_BED_PIN 9 // BED #define HEATER_BED_PIN 9 // BED
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#undef BEEPER #undef BEEPER_PIN
#define BEEPER -1 #define BEEPER_PIN -1
#undef LCD_PINS_RS #undef LCD_PINS_RS
#undef LCD_PINS_ENABLE #undef LCD_PINS_ENABLE
@ -56,6 +56,6 @@
#else #else
#define BEEPER 33 #define BEEPER_PIN 33
#endif // ULTRA_LCD && NEWPANEL #endif // ULTRA_LCD && NEWPANEL

3
Marlin/pins_AZTEEG_X3.h
View File

@ -8,7 +8,8 @@
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 33 #define BEEPER_PIN 33
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 31 #define DOGLCD_A0 31
#define DOGLCD_CS 32 #define DOGLCD_CS 32

4
Marlin/pins_AZTEEG_X3_PRO.h
View File

@ -6,7 +6,7 @@
#undef FAN_PIN #undef FAN_PIN
#define FAN_PIN 6 //Part Cooling System #define FAN_PIN 6 //Part Cooling System
#define BEEPER 33 #define BEEPER_PIN 33
#define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable) #define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable)
//Fans/Water Pump to cool the hotend cool side. //Fans/Water Pump to cool the hotend cool side.
#define EXTRUDER_0_AUTO_FAN_PIN 5 #define EXTRUDER_0_AUTO_FAN_PIN 5
@ -97,7 +97,7 @@
//LCD Pins// //LCD Pins//
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 33 #define BEEPER_PIN 33
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 44
#define DOGLCD_CS 45 #define DOGLCD_CS 45

2
Marlin/pins_ELEFU_3.h
View File

@ -53,7 +53,7 @@
#define TEMP_2_PIN 1 //ANALOG NUMBERING #define TEMP_2_PIN 1 //ANALOG NUMBERING
#define TEMP_BED_PIN 0 //ANALOG NUMBERING #define TEMP_BED_PIN 0 //ANALOG NUMBERING
#define BEEPER 36 #define BEEPER_PIN 36
#define KILL_PIN -1 #define KILL_PIN -1

2
Marlin/pins_GEN7_CUSTOM.h
View File

@ -56,7 +56,7 @@
//#define TX_ENABLE_PIN 12 //#define TX_ENABLE_PIN 12
//#define RX_ENABLE_PIN 13 //#define RX_ENABLE_PIN 13
#define BEEPER -1 #define BEEPER_PIN -1
#define SDCARDDETECT -1 #define SDCARDDETECT -1
#define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work #define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work

2
Marlin/pins_MEGACONTROLLER.h
View File

@ -89,7 +89,7 @@
#endif #endif
#ifdef MINIPANEL #ifdef MINIPANEL
#define BEEPER 46 #define BEEPER_PIN 46
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 47 #define DOGLCD_A0 47
#define DOGLCD_CS 45 #define DOGLCD_CS 45

2
Marlin/pins_MEGATRONICS.h
View File

@ -58,7 +58,7 @@
#define HEATER_BED_PIN 10 // BED #define HEATER_BED_PIN 10 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define BEEPER 33 // AUX-4 #define BEEPER_PIN 33 // AUX-4
#if defined(ULTRA_LCD) && defined(NEWPANEL) #if defined(ULTRA_LCD) && defined(NEWPANEL)

2
Marlin/pins_MEGATRONICS_2.h
View File

@ -74,7 +74,7 @@
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif #endif
#define BEEPER 64 #define BEEPER_PIN 64
#define LCD_PINS_RS 14 #define LCD_PINS_RS 14

2
Marlin/pins_MEGATRONICS_3.h
View File

@ -76,7 +76,7 @@
#define TEMP_2_PIN (TEMP_SENSOR_2 == -1 ? 9 : 12) // ANALOG NUMBERING #define TEMP_2_PIN (TEMP_SENSOR_2 == -1 ? 9 : 12) // ANALOG NUMBERING
#define TEMP_BED_PIN (TEMP_SENSOR_BED == -1 ? 8 : 14) // ANALOG NUMBERING #define TEMP_BED_PIN (TEMP_SENSOR_BED == -1 ? 8 : 14) // ANALOG NUMBERING
#define BEEPER 61 #define BEEPER_PIN 61
#define LCD_PINS_RS 32 #define LCD_PINS_RS 32
#define LCD_PINS_ENABLE 31 #define LCD_PINS_ENABLE 31

4
Marlin/pins_MINIRAMBO.h
View File

@ -91,8 +91,8 @@
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define KILL_PIN 32 #define KILL_PIN 32
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
//arduino pin which triggers an piezzo beeper
#define BEEPER 84 // Beeper on AUX-4 #define BEEPER_PIN 84 // Beeper on AUX-4
#define LCD_PINS_RS 82 #define LCD_PINS_RS 82
#define LCD_PINS_ENABLE 18 #define LCD_PINS_ENABLE 18
#define LCD_PINS_D4 19 #define LCD_PINS_D4 19

3
Marlin/pins_MINITRONICS.h
View File

@ -59,8 +59,7 @@
#define HEATER_BED_PIN 3 // BED #define HEATER_BED_PIN 3 // BED
#define TEMP_BED_PIN 6 // ANALOG NUMBERING #define TEMP_BED_PIN 6 // ANALOG NUMBERING
#define BEEPER -1 #define BEEPER_PIN -1
#define LCD_PINS_RS -1 #define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1 #define LCD_PINS_ENABLE -1

4
Marlin/pins_PRINTRBOARD.h
View File

@ -79,7 +79,7 @@
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
//we have no buzzer installed //we have no buzzer installed
#define BEEPER -1 #define BEEPER_PIN -1
//LCD Pins //LCD Pins
#if ENABLED(LCD_I2C_PANELOLU2) #if ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 27 //RX1 - fastio.h pin mapping 27 #define BTN_EN1 27 //RX1 - fastio.h pin mapping 27
@ -92,7 +92,7 @@
#endif // ULTRA_LCD && NEWPANEL #endif // ULTRA_LCD && NEWPANEL
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 32 //FastIO #define BEEPER_PIN 32 //FastIO
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 42 //Non-FastIO #define DOGLCD_A0 42 //Non-FastIO
#define DOGLCD_CS 43 //Non-FastIO #define DOGLCD_CS 43 //Non-FastIO

12
Marlin/pins_RAMBO.h
View File

@ -112,8 +112,9 @@
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define KILL_PIN 80 #define KILL_PIN 80
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
//arduino pin which triggers an piezzo beeper
#define BEEPER 79 // Beeper on AUX-4 #define BEEPER_PIN 79 // Beeper on AUX-4
#define LCD_PINS_RS 70 #define LCD_PINS_RS 70
#define LCD_PINS_ENABLE 71 #define LCD_PINS_ENABLE 71
#define LCD_PINS_D4 72 #define LCD_PINS_D4 72
@ -133,8 +134,9 @@
#define SDCARDDETECT 81 // Ramps does not use this port #define SDCARDDETECT 81 // Ramps does not use this port
#else //!NEWPANEL - old style panel with shift register #else //!NEWPANEL - old style panel with shift register
//arduino pin witch triggers an piezzo beeper
#define BEEPER 33 No Beeper added #define BEEPER_PIN 33 // No Beeper added
//buttons are attached to a shift register //buttons are attached to a shift register
// Not wired this yet // Not wired this yet
// #define SHIFT_CLK 38 // #define SHIFT_CLK 38
@ -165,7 +167,7 @@
#endif // ULTRA_LCD #endif // ULTRA_LCD
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 44 #define BEEPER_PIN 44
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 70 #define DOGLCD_A0 70
#define DOGLCD_CS 71 #define DOGLCD_CS 71

15
Marlin/pins_RAMPS_13.h
View File

@ -159,7 +159,7 @@
#endif #endif
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER 37 #define BEEPER_PIN 37
#define BTN_EN1 31 #define BTN_EN1 31
#define BTN_EN2 33 #define BTN_EN2 33
@ -186,12 +186,12 @@
#define SDCARDDETECT 49 #define SDCARDDETECT 49
#define LCD_SDSS 53 #define LCD_SDSS 53
#define KILL_PIN 41 #define KILL_PIN 41
#define BEEPER 23 #define BEEPER_PIN 23
#define DOGLCD_CS 29 #define DOGLCD_CS 29
#define DOGLCD_A0 27 #define DOGLCD_A0 27
#define LCD_PIN_BL 33 #define LCD_PIN_BL 33
#elif defined(MINIPANEL) #elif defined(MINIPANEL)
#define BEEPER 42 #define BEEPER_PIN 42
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 44
#define DOGLCD_CS 66 #define DOGLCD_CS 66
@ -211,9 +211,10 @@
#define BTN_ENC 59 //the click switch #define BTN_ENC 59 //the click switch
//not connected to a pin //not connected to a pin
#define SDCARDDETECT 49 #define SDCARDDETECT 49
#else #else
// arduino pin which triggers an piezzo beeper
#define BEEPER 33 // Beeper on AUX-4 #define BEEPER_PIN 33 // Beeper on AUX-4
// buttons are directly attached using AUX-2 // buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
@ -241,8 +242,8 @@
#endif #endif
#else // !NEWPANEL (Old-style panel with shift register) #else // !NEWPANEL (Old-style panel with shift register)
// Arduino pin to trigger a piezzo beeper
#define BEEPER 33 // No Beeper added #define BEEPER_PIN 33 // No Beeper added
// Buttons are attached to a shift register // Buttons are attached to a shift register
// Not wired yet // Not wired yet

8
Marlin/pins_RIGIDBOARD.h
View File

@ -22,8 +22,8 @@
#if ENABLED(RIGIDBOT_PANEL) #if ENABLED(RIGIDBOT_PANEL)
#undef BEEPER #undef BEEPER_PIN
#define BEEPER -1 #define BEEPER_PIN -1
#undef SDCARDDETECT #undef SDCARDDETECT
#define SDCARDDETECT 22 #define SDCARDDETECT 22
@ -48,8 +48,8 @@
#elif defined(REPRAP_DISCOUNT_SMART_CONTROLLER) #elif defined(REPRAP_DISCOUNT_SMART_CONTROLLER)
#undef BEEPER #undef BEEPER_PIN
#define BEEPER -1 #define BEEPER_PIN -1
#undef SDCARDDETECT #undef SDCARDDETECT
#define SDCARDDETECT 22 #define SDCARDDETECT 22

2
Marlin/pins_RUMBA.h
View File

@ -102,7 +102,7 @@
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define SDCARDDETECT 49 #define SDCARDDETECT 49
#define BEEPER 44 #define BEEPER_PIN 44
#define LCD_PINS_RS 19 #define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 42 #define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 18 #define LCD_PINS_D4 18

6
Marlin/pins_SANGUINOLOLU_11.h
View File

@ -95,7 +95,7 @@
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
// No buzzer installed // No buzzer installed
#define BEEPER -1 #define BEEPER_PIN -1
// LCD Pins // LCD Pins
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
@ -106,7 +106,7 @@
#define LCD_PINS_RS 30 //CS chip select /SS chip slave select #define LCD_PINS_RS 30 //CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 29 //SID (MOSI) #define LCD_PINS_ENABLE 29 //SID (MOSI)
#define LCD_PINS_D4 17 //SCK (CLK) clock #define LCD_PINS_D4 17 //SCK (CLK) clock
#define BEEPER 27 // Pin 27 is take by LED_Pin, but Melzi LED do nothing with Marlin and I take this pin for BEEPER.... See here > [github.com] , If you want use this pin with Gcode M42 instead BEEPER #define BEEPER_PIN 27 // Pin 27 is taken by LED_PIN, but Melzi LED does nothing with Marlin so this can be used for BEEPER_PIN. You can use this pin with M42 instead of BEEPER_PIN.
#else // Sanguinololu 1.3 #else // Sanguinololu 1.3
#define LCD_PINS_RS 4 #define LCD_PINS_RS 4
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
@ -160,7 +160,7 @@
#elif ENABLED(MAKRPANEL) #elif ENABLED(MAKRPANEL)
#define BEEPER 29 #define BEEPER_PIN 29
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 30 #define DOGLCD_A0 30

2
Marlin/pins_SAV_MKI.h
View File

@ -85,7 +85,7 @@
#define ALARM_PIN -1 #define ALARM_PIN -1
#define SDCARDDETECT -1 #define SDCARDDETECT -1
#define BEEPER -1 #define BEEPER_PIN -1
#define LCD_PINS_RS -1 #define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1 #define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1 #define LCD_PINS_D4 -1

5
Marlin/pins_TEENSYLU.h
View File

@ -68,9 +68,10 @@
#endif #endif
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
//we have no buzzer installed
#define BEEPER -1
//LCD Pins //LCD Pins
#define BEEPER_PIN -1
#if ENABLED(LCD_I2C_PANELOLU2) #if ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 27 //RX1 - fastio.h pin mapping 27 #define BTN_EN1 27 //RX1 - fastio.h pin mapping 27
#define BTN_EN2 26 //TX1 - fastio.h pin mapping 26 #define BTN_EN2 26 //TX1 - fastio.h pin mapping 26

3
Marlin/pins_ULTIMAIN_2.h
View File

@ -58,8 +58,7 @@
#define MOTOR_CURRENT_PWM_RANGE 2000 #define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
//arduino pin witch triggers an piezzo beeper #define BEEPER_PIN 18
#define BEEPER 18
#define LCD_PINS_RS 20 #define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 15 #define LCD_PINS_ENABLE 15

9
Marlin/pins_ULTIMAKER.h
View File

@ -57,9 +57,9 @@
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define BEEPER_PIN 18
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
//arduino pin witch triggers an piezzo beeper
#define BEEPER 18
#define LCD_PINS_RS 20 #define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
@ -71,15 +71,12 @@
//buttons are directly attached //buttons are directly attached
#define BTN_EN1 40 #define BTN_EN1 40
#define BTN_EN2 42 #define BTN_EN2 42
#define BTN_ENC 19 //the click #define BTN_ENC 19
#define SDCARDDETECT 38 #define SDCARDDETECT 38
#else //!NEWPANEL - Old style panel with shift register #else //!NEWPANEL - Old style panel with shift register
//arduino pin witch triggers an piezzo beeper
#define BEEPER 18
//buttons are attached to a shift register //buttons are attached to a shift register
#define SHIFT_CLK 38 #define SHIFT_CLK 38
#define SHIFT_LD 42 #define SHIFT_LD 42

2
Marlin/ultralcd.cpp
View File

@ -1325,7 +1325,7 @@ void lcd_quick_feedback() {
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS (1000/6) #define LCD_FEEDBACK_FREQUENCY_DURATION_MS (1000/6)
#endif #endif
lcd.buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ); lcd.buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
#elif defined(BEEPER) && BEEPER >= 0 #elif PIN_EXISTS(BEEPER)
#ifndef LCD_FEEDBACK_FREQUENCY_HZ #ifndef LCD_FEEDBACK_FREQUENCY_HZ
#define LCD_FEEDBACK_FREQUENCY_HZ 5000 #define LCD_FEEDBACK_FREQUENCY_HZ 5000
#endif #endif