diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 158b552d3..c62fd7db7 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -4460,7 +4460,7 @@ void home_all_axes() { gcode_G28(true); } if (verbose_level || seenQ) { SERIAL_PROTOCOLPGM("Manual G29 "); if (g29_in_progress) { - SERIAL_PROTOCOLPAIR("point ", abl_probe_index + 1); + SERIAL_PROTOCOLPAIR("point ", min(abl_probe_index + 1, abl2)); SERIAL_PROTOCOLLNPAIR(" of ", abl2); } else diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index fc3d27881..b8d3380e8 100755 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -484,6 +484,11 @@ uint16_t max_display_update_time = 0; static const char moving[] PROGMEM = MSG_MOVING; static const char *sync_message = moving; + // + // Display the synchronize screen until moves are + // finished, and don't return to the caller until + // done. ** This blocks the command queue! ** + // void _lcd_synchronize() { static bool no_reentry = false; if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, sync_message); @@ -498,6 +503,8 @@ uint16_t max_display_update_time = 0; lcd_goto_screen(old_screen); } + // Display the synchronize screen with a custom message + // ** This blocks the command queue! ** void lcd_synchronize(const char * const msg=NULL) { sync_message = msg ? msg : moving; _lcd_synchronize(); @@ -1427,6 +1434,26 @@ void kill_screen(const char* lcd_msg) { #endif ); + // + // Raise Z to the "manual probe height" + // Don't return until done. + // ** This blocks the command queue! ** + // + void _lcd_after_probing() { + #if MANUAL_PROBE_HEIGHT > 0 + current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS) + MANUAL_PROBE_HEIGHT; + line_to_current(Z_AXIS); + #endif + // Display "Done" screen and wait for moves to complete + #if MANUAL_PROBE_HEIGHT > 0 || ENABLED(MESH_BED_LEVELING) + lcd_synchronize(PSTR(MSG_LEVEL_BED_DONE)); + #endif + lcd_goto_previous_menu(); + lcd_completion_feedback(); + defer_return_to_status = false; + //LCD_MESSAGEPGM(MSG_LEVEL_BED_DONE); + } + #if ENABLED(MESH_BED_LEVELING) // Utility to go to the next mesh point @@ -1445,12 +1472,22 @@ void kill_screen(const char* lcd_msg) { lcd_synchronize(); } - #endif // MESH_BED_LEVELING + #elif ENABLED(PROBE_MANUALLY) - void _lcd_level_bed_done() { - if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_DONE)); - lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; - } + bool lcd_wait_for_move; + + // + // Bed leveling is done. Wait for G29 to complete. + // A flag is used so that this can release control + // and allow the command queue to be processed. + // + void _lcd_level_bed_done() { + if (!lcd_wait_for_move) _lcd_after_probing(); + if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_DONE)); + lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; + } + + #endif void _lcd_level_goto_next_point(); @@ -1462,60 +1499,55 @@ void kill_screen(const char* lcd_msg) { if (lcd_clicked) { - // Use a hook to set the probe point z + // + // Save the current Z position + // + #if ENABLED(MESH_BED_LEVELING) + // // MBL records the position but doesn't move to the next one + // + mbl.set_zigzag_z(manual_probe_index, current_position[Z_AXIS]); - #elif ENABLED(PROBE_MANUALLY) - - // The last G29 will record but not move - if (manual_probe_index == total_probe_points - 1) - enqueue_and_echo_commands_P(PSTR("G29 V1")); - #endif // If done... if (++manual_probe_index >= total_probe_points) { - // Say "Done!" - lcd_goto_screen(_lcd_level_bed_done); + #if ENABLED(PROBE_MANUALLY) - // Raise Z to the "manual probe height" - #if MANUAL_PROBE_HEIGHT > 0 - current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS) + MANUAL_PROBE_HEIGHT; - line_to_current(Z_AXIS); - #endif + // + // The last G29 will record and enable but not move. + // Since G29 is deferred, + // + lcd_wait_for_move = true; + enqueue_and_echo_commands_P(PSTR("G29 V1")); + lcd_goto_screen(_lcd_level_bed_done); - #if MANUAL_PROBE_HEIGHT > 0 || ENABLED(MESH_BED_LEVELING) - lcd_synchronize(PSTR(MSG_LEVEL_BED_DONE)); - #endif + #elif ENABLED(MESH_BED_LEVELING) - // Enable leveling, if needed - #if ENABLED(MESH_BED_LEVELING) + _lcd_after_probing(); mbl.set_has_mesh(true); mesh_probing_done(); - #elif ENABLED(PROBE_MANUALLY) - - // ABL will be enabled due to "G29". - #endif - lcd_goto_previous_menu(); // Return to the last clicked item ("Level Bed") - - //LCD_MESSAGEPGM(MSG_LEVEL_BED_DONE); - lcd_completion_feedback(); } - else + else { + // MESH_BED_LEVELING: Z already stored, just move + // PROBE_MANUALLY: Send G29 to record Z, then move _lcd_level_goto_next_point(); + } return; } + // // Encoder knob or keypad buttons adjust the Z position + // if (encoderPosition) { refresh_cmd_timeout(); current_position[Z_AXIS] += float((int32_t)encoderPosition) * (MBL_Z_STEP); @@ -1526,8 +1558,9 @@ void kill_screen(const char* lcd_msg) { encoderPosition = 0; } - // Update on first display, then only on updates to Z position - // Show message above on clicks instead + // + // Draw on first display, then only on Z change + // if (lcdDrawUpdate) { const float v = current_position[Z_AXIS]; lcd_implementation_drawedit(PSTR(MSG_MOVE_Z), ftostr43sign(v + (v < 0 ? -0.0001 : 0.0001), '+')); @@ -1538,10 +1571,6 @@ void kill_screen(const char* lcd_msg) { * Step 6: Display "Next point: 1 / 9" while waiting for move to finish */ - #if ENABLED(PROBE_MANUALLY) - bool lcd_wait_for_move; - #endif - void _lcd_level_bed_moving() { if (lcdDrawUpdate) { char msg[10]; @@ -1578,7 +1607,7 @@ void kill_screen(const char* lcd_msg) { #elif ENABLED(PROBE_MANUALLY) - // G29 will signal when it's done + // G29 Records Z, moves, and signals when it pauses lcd_wait_for_move = true; enqueue_and_echo_commands_P(PSTR("G29 V1")); @@ -1628,13 +1657,14 @@ void kill_screen(const char* lcd_msg) { /** * Step 1: Bed Level entry-point * - Cancel - * - Leveling On/Off (if there is leveling data) + * - Auto Home (if homing needed) + * - Leveling On/Off (if data exists, and homed) * - Level Bed > - * - Fade Height (Req: ENABLE_LEVELING_FADE_HEIGHT) - * - Mesh Z Offset (Req: MESH_BED_LEVELING) - * - Z Probe Offset (Req: HAS_BED_PROBE, Opt: BABYSTEP_ZPROBE_OFFSET) - * - Load Settings (Req: EEPROM_SETTINGS) - * - Save Settings (Req: EEPROM_SETTINGS) + * - Fade Height (Req: ENABLE_LEVELING_FADE_HEIGHT) + * - Mesh Z Offset (Req: MESH_BED_LEVELING) + * - Z Probe Offset (Req: HAS_BED_PROBE, Opt: BABYSTEP_ZPROBE_OFFSET) + * - Load Settings (Req: EEPROM_SETTINGS) + * - Save Settings (Req: EEPROM_SETTINGS) */ void lcd_bed_leveling() { START_MENU();