diff --git a/Marlin/src/feature/power_loss_recovery.h b/Marlin/src/feature/power_loss_recovery.h
index d173b87c5..d5a0aea69 100644
--- a/Marlin/src/feature/power_loss_recovery.h
+++ b/Marlin/src/feature/power_loss_recovery.h
@@ -19,14 +19,12 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
  * power_loss_recovery.h - Resume an SD print after power-loss
  */
 
-#ifndef _POWER_LOSS_RECOVERY_H_
-#define _POWER_LOSS_RECOVERY_H_
-
 #include "../sd/cardreader.h"
 #include "../core/millis_t.h"
 #include "../inc/MarlinConfigPre.h"
@@ -99,5 +97,3 @@ extern uint8_t job_recovery_commands_count;
 
 void check_print_job_recovery();
 void save_job_recovery_info();
-
-#endif // _POWER_LOSS_RECOVERY_H_
diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp
index ff449d6f3..a65d9020b 100644
--- a/Marlin/src/lcd/menu/menu.cpp
+++ b/Marlin/src/lcd/menu/menu.cpp
@@ -27,7 +27,6 @@
 #include "menu.h"
 
 #include "../ultralcd.h"
-#include "../../sd/cardreader.h"
 #include "../../module/planner.h"
 #include "../../module/motion.h"
 #include "../../module/probe.h"
@@ -40,18 +39,14 @@
 
 #include <stdarg.h>
 
+#if ENABLED(SDSUPPORT)
+  #include "../../sd/cardreader.h"
+#endif
+
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
   #include "../../feature/pause.h"
 #endif
 
-#if ENABLED(POWER_LOSS_RECOVERY)
-  #include "../../feature/power_loss_recovery.h"
-#endif
-
-#if ENABLED(PRINTCOUNTER) && ENABLED(LCD_INFO_MENU)
-  #include "../../libs/duration_t.h"
-#endif
-
 #if HAS_LEVELING
   #include "../../feature/bedlevel/bedlevel.h"
 #endif
@@ -405,80 +400,6 @@ void line_to_z(const float &z) {
   line_to_current_z();
 }
 
-#if ENABLED(POWER_LOSS_RECOVERY)
-
-  static void lcd_power_loss_recovery_resume() {
-    char cmd[20];
-
-    // Return to status now
-    lcd_return_to_status();
-
-    // Turn leveling off and home
-    enqueue_and_echo_commands_P(PSTR("M420 S0\nG28 R0"
-      #if ENABLED(MARLIN_DEV_MODE)
-        " S"
-      #elif !IS_KINEMATIC
-        " X Y"
-      #endif
-    ));
-
-    #if HAS_HEATED_BED
-      const int16_t bt = job_recovery_info.target_temperature_bed;
-      if (bt) {
-        // Restore the bed temperature
-        sprintf_P(cmd, PSTR("M190 S%i"), bt);
-        enqueue_and_echo_command(cmd);
-      }
-    #endif
-
-    // Restore all hotend temperatures
-    HOTEND_LOOP() {
-      const int16_t et = job_recovery_info.target_temperature[e];
-      if (et) {
-        #if HOTENDS > 1
-          sprintf_P(cmd, PSTR("T%i"), e);
-          enqueue_and_echo_command(cmd);
-        #endif
-        sprintf_P(cmd, PSTR("M109 S%i"), et);
-        enqueue_and_echo_command(cmd);
-      }
-    }
-
-    #if HOTENDS > 1
-      sprintf_P(cmd, PSTR("T%i"), job_recovery_info.active_hotend);
-      enqueue_and_echo_command(cmd);
-    #endif
-
-    // Restore print cooling fan speeds
-    for (uint8_t i = 0; i < FAN_COUNT; i++) {
-      uint8_t f = job_recovery_info.fan_speed[i];
-      if (f) {
-        sprintf_P(cmd, PSTR("M106 P%i S%i"), i, f);
-        enqueue_and_echo_command(cmd);
-      }
-    }
-
-    // Start draining the job recovery command queue
-    job_recovery_phase = JOB_RECOVERY_YES;
-  }
-
-  static void lcd_power_loss_recovery_cancel() {
-    card.removeJobRecoveryFile();
-    card.autostart_index = 0;
-    lcd_return_to_status();
-  }
-
-  void menu_job_recovery() {
-    defer_return_to_status = true;
-    START_MENU();
-    STATIC_ITEM(MSG_POWER_LOSS_RECOVERY);
-    MENU_ITEM(function, MSG_RESUME_PRINT, lcd_power_loss_recovery_resume);
-    MENU_ITEM(function, MSG_STOP_PRINT, lcd_power_loss_recovery_cancel);
-    END_MENU();
-  }
-
-#endif // POWER_LOSS_RECOVERY
-
 #if ENABLED(CUSTOM_USER_MENUS)
 
   #ifdef USER_SCRIPT_DONE
diff --git a/Marlin/src/lcd/menu/menu_job_recovery.cpp b/Marlin/src/lcd/menu/menu_job_recovery.cpp
new file mode 100644
index 000000000..51adcaf0d
--- /dev/null
+++ b/Marlin/src/lcd/menu/menu_job_recovery.cpp
@@ -0,0 +1,106 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+//
+// Job Recovery Menu
+//
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if HAS_LCD_MENU && ENABLED(POWER_LOSS_RECOVERY)
+
+#include "menu.h"
+#include "../../gcode/queue.h"
+#include "../../sd/cardreader.h"
+#include "../../feature/power_loss_recovery.h"
+
+static void lcd_power_loss_recovery_resume() {
+  char cmd[20];
+
+  // Return to status now
+  lcd_return_to_status();
+
+  // Turn leveling off and home
+  enqueue_and_echo_commands_P(PSTR("M420 S0\nG28 R0"
+    #if ENABLED(MARLIN_DEV_MODE)
+      " S"
+    #elif !IS_KINEMATIC
+      " X Y"
+    #endif
+  ));
+
+  #if HAS_HEATED_BED
+    const int16_t bt = job_recovery_info.target_temperature_bed;
+    if (bt) {
+      // Restore the bed temperature
+      sprintf_P(cmd, PSTR("M190 S%i"), bt);
+      enqueue_and_echo_command(cmd);
+    }
+  #endif
+
+  // Restore all hotend temperatures
+  HOTEND_LOOP() {
+    const int16_t et = job_recovery_info.target_temperature[e];
+    if (et) {
+      #if HOTENDS > 1
+        sprintf_P(cmd, PSTR("T%i"), e);
+        enqueue_and_echo_command(cmd);
+      #endif
+      sprintf_P(cmd, PSTR("M109 S%i"), et);
+      enqueue_and_echo_command(cmd);
+    }
+  }
+
+  #if HOTENDS > 1
+    sprintf_P(cmd, PSTR("T%i"), job_recovery_info.active_hotend);
+    enqueue_and_echo_command(cmd);
+  #endif
+
+  // Restore print cooling fan speeds
+  for (uint8_t i = 0; i < FAN_COUNT; i++) {
+    uint8_t f = job_recovery_info.fan_speed[i];
+    if (f) {
+      sprintf_P(cmd, PSTR("M106 P%i S%i"), i, f);
+      enqueue_and_echo_command(cmd);
+    }
+  }
+
+  // Start draining the job recovery command queue
+  job_recovery_phase = JOB_RECOVERY_YES;
+}
+
+static void lcd_power_loss_recovery_cancel() {
+  card.removeJobRecoveryFile();
+  card.autostart_index = 0;
+  lcd_return_to_status();
+}
+
+void menu_job_recovery() {
+  defer_return_to_status = true;
+  START_MENU();
+  STATIC_ITEM(MSG_POWER_LOSS_RECOVERY);
+  MENU_ITEM(function, MSG_RESUME_PRINT, lcd_power_loss_recovery_resume);
+  MENU_ITEM(function, MSG_STOP_PRINT, lcd_power_loss_recovery_cancel);
+  END_MENU();
+}
+
+#endif // HAS_LCD_MENU && POWER_LOSS_RECOVERY