diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL.cpp b/Marlin/src/HAL/HAL_LPC1768/HAL.cpp index 3c852e8e0..557981034 100644 --- a/Marlin/src/HAL/HAL_LPC1768/HAL.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/HAL.cpp @@ -174,12 +174,12 @@ uint16_t HAL_adc_get_result(void) { #define SBIT_PWMEN 2 #define SBIT_PWMMR0R 1 -#define PWM_1 0 //P2_0 (0-1 Bits of PINSEL4) -#define PWM_2 2 //P2_1 (2-3 Bits of PINSEL4) -#define PWM_3 4 //P2_2 (4-5 Bits of PINSEL4) -#define PWM_4 6 //P2_3 (6-7 Bits of PINSEL4) -#define PWM_5 8 //P2_4 (8-9 Bits of PINSEL4) -#define PWM_6 10 //P2_5 (10-11 Bits of PINSEL4) +#define PWM_1 0 //P2_00 (0-1 Bits of PINSEL4) +#define PWM_2 2 //P2_01 (2-3 Bits of PINSEL4) +#define PWM_3 4 //P2_02 (4-5 Bits of PINSEL4) +#define PWM_4 6 //P2_03 (6-7 Bits of PINSEL4) +#define PWM_5 8 //P2_04 (8-9 Bits of PINSEL4) +#define PWM_6 10 //P2_05 (10-11 Bits of PINSEL4) void HAL_pwm_init(void) { LPC_PINCON->PINSEL4 = _BV(PWM_5) | _BV(PWM_6); @@ -193,7 +193,7 @@ void HAL_pwm_init(void) { // Trigger the latch Enable Bits to load the new Match Values MR0, MR5, MR6 LPC_PWM1->LER = _BV(0) | _BV(5) | _BV(6); - // Enable the PWM output pins for PWM_5-PWM_6(P2_4 - P2_5) + // Enable the PWM output pins for PWM_5-PWM_6(P2_04 - P2_05) LPC_PWM1->PCR = _BV(13) | _BV(14); } diff --git a/Marlin/src/HAL/HAL_LPC1768/pinmapping.cpp b/Marlin/src/HAL/HAL_LPC1768/pinmapping.cpp index 174ce8616..42a71b80a 100644 --- a/Marlin/src/HAL/HAL_LPC1768/pinmapping.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/pinmapping.cpp @@ -35,15 +35,18 @@ int16_t GET_PIN_MAP_INDEX(pin_t pin) { return -1; } -int16_t PARSED_PIN_INDEX(char code, int16_t dval) { +int16_t PARSED_PIN_INDEX(char code, int16_t dval) { // treats 1.2 and 1.20 as the same thing if (parser.seenval(code)) { int port, pin; - if (sscanf(parser.strval(code), "%d.%d", &port, &pin) == 2) + char pin_string[3] = {" "}; + if (sscanf(parser.strval(code), "%d.%2s", &port, pin_string) == 2) { + if (pin_string[1] == '\0') pin_string[1] = '0'; // add trailing zero if a null is found + pin = (10 * (pin_string[0] - '0')) + (pin_string[1] - '0'); // convert string to number for (size_t i = 0; i < NUM_DIGITAL_PINS; ++i) if (LPC1768_PIN_PORT(pin_map[i]) == port && LPC1768_PIN_PIN(pin_map[i]) == pin) return i; + } } - return dval; } diff --git a/Marlin/src/HAL/HAL_LPC1768/pinmapping.h b/Marlin/src/HAL/HAL_LPC1768/pinmapping.h index c9ce96eef..efe3e52e8 100644 --- a/Marlin/src/HAL/HAL_LPC1768/pinmapping.h +++ b/Marlin/src/HAL/HAL_LPC1768/pinmapping.h @@ -109,19 +109,19 @@ constexpr int8_t LPC1768_PIN_ADC(const pin_t pin) { return (int8_t)((pin >> 10) #define P_NC -1 #if SERIAL_PORT != 3 - #define P0_0 LPC1768_PIN(PORT(0), PIN(0), INTERRUPT(1), PWM(0), ADC_NONE) - #define P0_1 LPC1768_PIN(PORT(0), PIN(1), INTERRUPT(1), PWM(0), ADC_NONE) + #define P0_00 LPC1768_PIN(PORT(0), PIN(0), INTERRUPT(1), PWM(0), ADC_NONE) + #define P0_01 LPC1768_PIN(PORT(0), PIN(1), INTERRUPT(1), PWM(0), ADC_NONE) #endif #if SERIAL_PORT != 0 - #define P0_2 LPC1768_PIN(PORT(0), PIN(2), INTERRUPT(1), PWM(0), ADC_CHAN(7)) - #define P0_3 LPC1768_PIN(PORT(0), PIN(3), INTERRUPT(1), PWM(0), ADC_CHAN(6)) + #define P0_02 LPC1768_PIN(PORT(0), PIN(2), INTERRUPT(1), PWM(0), ADC_CHAN(7)) + #define P0_03 LPC1768_PIN(PORT(0), PIN(3), INTERRUPT(1), PWM(0), ADC_CHAN(6)) #endif -#define P0_4 LPC1768_PIN(PORT(0), PIN(4), INTERRUPT(1), PWM(0), ADC_NONE) -#define P0_5 LPC1768_PIN(PORT(0), PIN(5), INTERRUPT(1), PWM(0), ADC_NONE) -#define P0_6 LPC1768_PIN(PORT(0), PIN(6), INTERRUPT(1), PWM(0), ADC_NONE) -#define P0_7 LPC1768_PIN(PORT(0), PIN(7), INTERRUPT(1), PWM(0), ADC_NONE) -#define P0_8 LPC1768_PIN(PORT(0), PIN(8), INTERRUPT(1), PWM(0), ADC_NONE) -#define P0_9 LPC1768_PIN(PORT(0), PIN(9), INTERRUPT(1), PWM(0), ADC_NONE) +#define P0_04 LPC1768_PIN(PORT(0), PIN(4), INTERRUPT(1), PWM(0), ADC_NONE) +#define P0_05 LPC1768_PIN(PORT(0), PIN(5), INTERRUPT(1), PWM(0), ADC_NONE) +#define P0_06 LPC1768_PIN(PORT(0), PIN(6), INTERRUPT(1), PWM(0), ADC_NONE) +#define P0_07 LPC1768_PIN(PORT(0), PIN(7), INTERRUPT(1), PWM(0), ADC_NONE) +#define P0_08 LPC1768_PIN(PORT(0), PIN(8), INTERRUPT(1), PWM(0), ADC_NONE) +#define P0_09 LPC1768_PIN(PORT(0), PIN(9), INTERRUPT(1), PWM(0), ADC_NONE) #if SERIAL_PORT != 2 #define P0_10 LPC1768_PIN(PORT(0), PIN(10), INTERRUPT(1), PWM(0), ADC_NONE) #define P0_11 LPC1768_PIN(PORT(0), PIN(11), INTERRUPT(1), PWM(0), ADC_NONE) @@ -144,11 +144,11 @@ constexpr int8_t LPC1768_PIN_ADC(const pin_t pin) { return (int8_t)((pin >> 10) #define P0_28 LPC1768_PIN(PORT(0), PIN(28), INTERRUPT(1), PWM(0), ADC_NONE) #define P0_29 LPC1768_PIN(PORT(0), PIN(29), INTERRUPT(1), PWM(0), ADC_NONE) #define P0_30 LPC1768_PIN(PORT(0), PIN(30), INTERRUPT(1), PWM(0), ADC_NONE) -#define P1_0 LPC1768_PIN(PORT(1), PIN(0), INTERRUPT(0), PWM(0), ADC_NONE) -#define P1_1 LPC1768_PIN(PORT(1), PIN(1), INTERRUPT(0), PWM(0), ADC_NONE) -#define P1_4 LPC1768_PIN(PORT(1), PIN(4), INTERRUPT(0), PWM(0), ADC_NONE) -#define P1_8 LPC1768_PIN(PORT(1), PIN(8), INTERRUPT(0), PWM(0), ADC_NONE) -#define P1_9 LPC1768_PIN(PORT(1), PIN(9), INTERRUPT(0), PWM(0), ADC_NONE) +#define P1_00 LPC1768_PIN(PORT(1), PIN(0), INTERRUPT(0), PWM(0), ADC_NONE) +#define P1_01 LPC1768_PIN(PORT(1), PIN(1), INTERRUPT(0), PWM(0), ADC_NONE) +#define P1_04 LPC1768_PIN(PORT(1), PIN(4), INTERRUPT(0), PWM(0), ADC_NONE) +#define P1_08 LPC1768_PIN(PORT(1), PIN(8), INTERRUPT(0), PWM(0), ADC_NONE) +#define P1_09 LPC1768_PIN(PORT(1), PIN(9), INTERRUPT(0), PWM(0), ADC_NONE) #define P1_10 LPC1768_PIN(PORT(1), PIN(10), INTERRUPT(0), PWM(0), ADC_NONE) #define P1_14 LPC1768_PIN(PORT(1), PIN(14), INTERRUPT(0), PWM(0), ADC_NONE) #define P1_15 LPC1768_PIN(PORT(1), PIN(15), INTERRUPT(0), PWM(0), ADC_NONE) @@ -168,16 +168,16 @@ constexpr int8_t LPC1768_PIN_ADC(const pin_t pin) { return (int8_t)((pin >> 10) #define P1_29 LPC1768_PIN(PORT(1), PIN(29), INTERRUPT(0), PWM(0), ADC_NONE) #define P1_30 LPC1768_PIN(PORT(1), PIN(30), INTERRUPT(0), PWM(0), ADC_CHAN(4)) #define P1_31 LPC1768_PIN(PORT(1), PIN(31), INTERRUPT(0), PWM(0), ADC_CHAN(5)) -#define P2_0 LPC1768_PIN(PORT(2), PIN(0), INTERRUPT(1), PWM(1), ADC_NONE) -#define P2_1 LPC1768_PIN(PORT(2), PIN(1), INTERRUPT(1), PWM(1), ADC_NONE) -#define P2_2 LPC1768_PIN(PORT(2), PIN(2), INTERRUPT(1), PWM(1), ADC_NONE) -#define P2_3 LPC1768_PIN(PORT(2), PIN(3), INTERRUPT(1), PWM(1), ADC_NONE) -#define P2_4 LPC1768_PIN(PORT(2), PIN(4), INTERRUPT(1), PWM(1), ADC_NONE) -#define P2_5 LPC1768_PIN(PORT(2), PIN(5), INTERRUPT(1), PWM(1), ADC_NONE) -#define P2_6 LPC1768_PIN(PORT(2), PIN(6), INTERRUPT(1), PWM(0), ADC_NONE) -#define P2_7 LPC1768_PIN(PORT(2), PIN(7), INTERRUPT(1), PWM(0), ADC_NONE) -#define P2_8 LPC1768_PIN(PORT(2), PIN(8), INTERRUPT(1), PWM(0), ADC_NONE) -#define P2_9 LPC1768_PIN(PORT(2), PIN(9), INTERRUPT(1), PWM(0), ADC_NONE) +#define P2_00 LPC1768_PIN(PORT(2), PIN(0), INTERRUPT(1), PWM(1), ADC_NONE) +#define P2_01 LPC1768_PIN(PORT(2), PIN(1), INTERRUPT(1), PWM(1), ADC_NONE) +#define P2_02 LPC1768_PIN(PORT(2), PIN(2), INTERRUPT(1), PWM(1), ADC_NONE) +#define P2_03 LPC1768_PIN(PORT(2), PIN(3), INTERRUPT(1), PWM(1), ADC_NONE) +#define P2_04 LPC1768_PIN(PORT(2), PIN(4), INTERRUPT(1), PWM(1), ADC_NONE) +#define P2_05 LPC1768_PIN(PORT(2), PIN(5), INTERRUPT(1), PWM(1), ADC_NONE) +#define P2_06 LPC1768_PIN(PORT(2), PIN(6), INTERRUPT(1), PWM(0), ADC_NONE) +#define P2_07 LPC1768_PIN(PORT(2), PIN(7), INTERRUPT(1), PWM(0), ADC_NONE) +#define P2_08 LPC1768_PIN(PORT(2), PIN(8), INTERRUPT(1), PWM(0), ADC_NONE) +#define P2_09 LPC1768_PIN(PORT(2), PIN(9), INTERRUPT(1), PWM(0), ADC_NONE) #define P2_10 LPC1768_PIN(PORT(2), PIN(10), INTERRUPT(1), PWM(0), ADC_NONE) #define P2_11 LPC1768_PIN(PORT(2), PIN(11), INTERRUPT(1), PWM(0), ADC_NONE) #define P2_12 LPC1768_PIN(PORT(2), PIN(12), INTERRUPT(1), PWM(0), ADC_NONE) @@ -231,7 +231,7 @@ constexpr bool INTERRUPT_PIN(const pin_t p) { constexpr pin_t adc_pin_table[] = { P0_23, P0_24, P0_25, P0_26, P1_30, P1_31, #if SERIAL_PORT != 0 - P0_3, P0_2 + P0_03, P0_02 #endif }; @@ -245,17 +245,17 @@ constexpr int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t p) { // P0.6 thru P0.9 are for the onboard SD card // P0.29 and P0.30 are for the USB port -#define HAL_SENSITIVE_PINS P0_6, P0_7, P0_8, P0_9, P0_29, P0_30 +#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09, P0_29, P0_30 // Pin map for M43 and M226 const pin_t pin_map[] = { #if SERIAL_PORT != 3 - P0_0, P0_1, + P0_00, P0_01, #endif #if SERIAL_PORT != 0 - P0_2, P0_3, + P0_02, P0_03, #endif - P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, + P0_04, P0_05, P0_06, P0_07, P0_08, P0_09, #if SERIAL_PORT != 2 P0_10, P0_11, #endif @@ -264,11 +264,11 @@ const pin_t pin_map[] = { #endif P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, - P1_0, P1_1, P1_4, P1_8, P1_9, P1_10, P1_14, P1_15, + P1_00, P1_01, P1_04, P1_08, P1_09, P1_10, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31, - P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, - P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, + P2_00, P2_01, P2_02, P2_03, P2_04, P2_05, P2_06, P2_07, + P2_08, P2_09, P2_10, P2_11, P2_12, P2_13, P3_25, P3_26, P4_28, P4_29 }; diff --git a/Marlin/src/HAL/HAL_LPC1768/spi_pins.h b/Marlin/src/HAL/HAL_LPC1768/spi_pins.h index 1e8ff2161..fdc2a93a2 100644 --- a/Marlin/src/HAL/HAL_LPC1768/spi_pins.h +++ b/Marlin/src/HAL/HAL_LPC1768/spi_pins.h @@ -26,10 +26,10 @@ #define LPC_SOFTWARE_SPI /** onboard SD card */ -//#define SCK_PIN P0_7 -//#define MISO_PIN P0_8 -//#define MOSI_PIN P0_9 -//#define SS_PIN P0_6 +//#define SCK_PIN P0_07 +//#define MISO_PIN P0_08 +//#define MOSI_PIN P0_09 +//#define SS_PIN P0_06 /** external */ #define SCK_PIN P0_15 #define MISO_PIN P0_17 diff --git a/Marlin/src/gcode/control/M42.cpp b/Marlin/src/gcode/control/M42.cpp index 6a0159676..7ddd1c002 100644 --- a/Marlin/src/gcode/control/M42.cpp +++ b/Marlin/src/gcode/control/M42.cpp @@ -28,11 +28,7 @@ * M42: Change pin status via GCode * * P Pin number (LED if omitted) - * For LPC1768 use M42 P1.20 S255 if wanting to set P1_20 to logic 1 - * NOTE - Repetier Host truncates trailing zeros on a decimal when - * sending commands so typing M42 P1.20 S255 results in - * M42 P1.2 S255 being sent. Pronterface doesn't have this issue. - * + * For LPC1768 enter pin P1_20 as M42 P1.20 * S Pin status from 0 - 255 */ void GcodeSuite::M42() { diff --git a/Marlin/src/pins/pins_AZSMZ_MINI.h b/Marlin/src/pins/pins_AZSMZ_MINI.h index 5bc1c34a5..36eb0ed23 100644 --- a/Marlin/src/pins/pins_AZSMZ_MINI.h +++ b/Marlin/src/pins/pins_AZSMZ_MINI.h @@ -48,23 +48,23 @@ // // Steppers // -#define X_STEP_PIN P2_0 -#define X_DIR_PIN P0_5 -#define X_ENABLE_PIN P0_4 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 -#define Y_STEP_PIN P2_1 +#define Y_STEP_PIN P2_01 #define Y_DIR_PIN P0_11 #define Y_ENABLE_PIN P0_10 -#define Z_STEP_PIN P2_2 +#define Z_STEP_PIN P2_02 #define Z_DIR_PIN P0_20 #define Z_ENABLE_PIN P0_19 -#define E0_STEP_PIN P2_3 +#define E0_STEP_PIN P2_03 #define E0_DIR_PIN P0_22 #define E0_ENABLE_PIN P0_21 -#define E1_STEP_PIN P2_8 +#define E1_STEP_PIN P2_08 #define E1_DIR_PIN P2_13 #define E1_ENABLE_PIN P4_29 @@ -80,14 +80,14 @@ // Heaters / Fans // // EFB -#define HEATER_0_PIN P2_4 -#define HEATER_BED_PIN P2_5 -#define FAN_PIN P2_7 +#define HEATER_0_PIN P2_04 +#define HEATER_BED_PIN P2_05 +#define FAN_PIN P2_07 #define FAN1_PIN P0_26 #if ENABLED(AZSMZ_12864) #define BEEPER_PIN P1_30 - #define DOGLCD_A0 P2_6 + #define DOGLCD_A0 P2_06 #define DOGLCD_CS P1_22 #define BTN_EN1 P4_28 #define BTN_EN2 P1_27 @@ -104,11 +104,11 @@ #define ENET_RXD1 P1_10 #define ENET_MOC P1_16 #define REF_CLK P1_15 -#define ENET_RXD0 P1_9 -#define ENET_CRS P1_8 -#define ENET_TX_EN P1_4 -#define ENET_TXD0 P1_0 -#define ENET_TXD1 P1_1 +#define ENET_RXD0 P1_09 +#define ENET_CRS P1_08 +#define ENET_TX_EN P1_04 +#define ENET_TXD0 P1_00 +#define ENET_TXD1 P1_01 /** * PWMs diff --git a/Marlin/src/pins/pins_AZTEEG_X5_GT.h b/Marlin/src/pins/pins_AZTEEG_X5_GT.h index f0acaca07..7051de426 100644 --- a/Marlin/src/pins/pins_AZTEEG_X5_GT.h +++ b/Marlin/src/pins/pins_AZTEEG_X5_GT.h @@ -49,23 +49,23 @@ // // Steppers // -#define X_STEP_PIN P2_1 +#define X_STEP_PIN P2_01 #define X_DIR_PIN P0_11 #define X_ENABLE_PIN P0_10 -#define Y_STEP_PIN P2_2 +#define Y_STEP_PIN P2_02 #define Y_DIR_PIN P0_20 #define Y_ENABLE_PIN P0_19 -#define Z_STEP_PIN P2_3 +#define Z_STEP_PIN P2_03 #define Z_DIR_PIN P0_22 #define Z_ENABLE_PIN P0_21 -#define E0_STEP_PIN P2_0 -#define E0_DIR_PIN P0_5 -#define E0_ENABLE_PIN P0_4 +#define E0_STEP_PIN P2_00 +#define E0_DIR_PIN P0_05 +#define E0_ENABLE_PIN P0_04 -#define E1_STEP_PIN P2_8 +#define E1_STEP_PIN P2_08 #define E1_DIR_PIN P2_13 #define E1_ENABLE_PIN P4_29 @@ -82,9 +82,9 @@ // Heaters / Fans // -#define HEATER_BED_PIN P2_7 -#define HEATER_0_PIN P2_4 -#define HEATER_1_PIN P2_5 +#define HEATER_BED_PIN P2_07 +#define HEATER_0_PIN P2_04 +#define HEATER_1_PIN P2_05 #define FAN_PIN P0_26 #define FAN1_PIN P1_22 @@ -94,7 +94,7 @@ #if ENABLED(VIKI2) || ENABLED(miniVIKI) #define BEEPER_PIN P1_30 - #define DOGLCD_A0 P2_6 + #define DOGLCD_A0 P2_06 #define DOGLCD_CS P0_16 #define BTN_EN1 P3_25 diff --git a/Marlin/src/pins/pins_MKS_SBASE.h b/Marlin/src/pins/pins_MKS_SBASE.h index 9a60dbfc5..c84783d38 100644 --- a/Marlin/src/pins/pins_MKS_SBASE.h +++ b/Marlin/src/pins/pins_MKS_SBASE.h @@ -53,23 +53,23 @@ // // Steppers // -#define X_STEP_PIN P2_0 -#define X_DIR_PIN P0_5 -#define X_ENABLE_PIN P0_4 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 -#define Y_STEP_PIN P2_1 +#define Y_STEP_PIN P2_01 #define Y_DIR_PIN P0_11 #define Y_ENABLE_PIN P0_10 -#define Z_STEP_PIN P2_2 +#define Z_STEP_PIN P2_02 #define Z_DIR_PIN P0_20 #define Z_ENABLE_PIN P0_19 -#define E0_STEP_PIN P2_3 +#define E0_STEP_PIN P2_03 #define E0_DIR_PIN P0_22 #define E0_ENABLE_PIN P0_21 -#define E1_STEP_PIN P2_8 +#define E1_STEP_PIN P2_08 #define E1_DIR_PIN P2_13 #define E1_ENABLE_PIN P4_29 @@ -88,10 +88,10 @@ // Heaters / Fans // -#define HEATER_BED_PIN P2_5 -#define HEATER_0_PIN P2_7 -#define HEATER_1_PIN P2_6 -#define FAN_PIN P2_4 +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 +#define HEATER_1_PIN P2_06 +#define FAN_PIN P2_04 #define PS_ON_PIN P0_25 @@ -166,11 +166,11 @@ #endif #define ENET_MOC P1_16 // J12-3 #define REF_CLK P1_15 // J12-5 -#define ENET_RXD0 P1_9 // J12-7 -#define ENET_CRS P1_8 // J12-9 -#define ENET_TX_EN P1_4 // J12-10 -#define ENET_TXD0 P1_0 // J12-11 -#define ENET_TXD1 P1_1 // J12-12 +#define ENET_RXD0 P1_09 // J12-7 +#define ENET_CRS P1_08 // J12-9 +#define ENET_TX_EN P1_04 // J12-10 +#define ENET_TXD0 P1_00 // J12-11 +#define ENET_TXD1 P1_01 // J12-12 /** * PWMs @@ -180,17 +180,17 @@ * SERVO2 does NOT have a PWM assigned to it. * * PWM1.1 P1_18 SERVO3_PIN FIL_RUNOUT_PIN 5V output, PWM - * PWM1.1 P2_0 E0_STEP_PIN + * PWM1.1 P2_00 E0_STEP_PIN * PWM1.2 P1_20 SERVO0_PIN - * PWM1.2 P2_1 X_STEP_PIN + * PWM1.2 P2_01 X_STEP_PIN * PWM1.3 P1_21 SERVO1_PIN J5-1 - * PWM1.3 P2_2 Y_STEP_PIN + * PWM1.3 P2_02 Y_STEP_PIN * PWM1.4 P1_23 SDSS(SSEL0) J3-5 AUX-3 - * PWM1.4 P2_3 Z_STEP_PIN + * PWM1.4 P2_03 Z_STEP_PIN * PWM1.5 P1_24 X_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES - * PWM1.5 P2_4 RAMPS_D9_PIN + * PWM1.5 P2_04 RAMPS_D9_PIN * PWM1.6 P1_26 Y_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES - * PWM1.6 P2_5 RAMPS_D10_PIN + * PWM1.6 P2_05 RAMPS_D10_PIN */ /** diff --git a/Marlin/src/pins/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/pins_RAMPS_RE_ARM.h index 6e0014ad4..e25ae74f5 100644 --- a/Marlin/src/pins/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/pins_RAMPS_RE_ARM.h @@ -65,27 +65,27 @@ // // Steppers // -#define X_STEP_PIN P2_1 // (54) +#define X_STEP_PIN P2_01 // (54) #define X_DIR_PIN P0_11 // (55) #define X_ENABLE_PIN P0_10 // (38) -#define Y_STEP_PIN P2_2 // (60) +#define Y_STEP_PIN P2_02 // (60) #define Y_DIR_PIN P0_20 // (61) #define Y_ENABLE_PIN P0_19 // (56) -#define Z_STEP_PIN P2_3 // (46) +#define Z_STEP_PIN P2_03 // (46) #define Z_DIR_PIN P0_22 // (48) #define Z_ENABLE_PIN P0_21 // (62) -#define E0_STEP_PIN P2_0 // (26) -#define E0_DIR_PIN P0_5 // (28) -#define E0_ENABLE_PIN P0_4 // (24) +#define E0_STEP_PIN P2_00 // (26) +#define E0_DIR_PIN P0_05 // (28) +#define E0_ENABLE_PIN P0_04 // (24) -#define E1_STEP_PIN P2_8 // (36) +#define E1_STEP_PIN P2_08 // (36) #define E1_DIR_PIN P2_13 // (34) #define E1_ENABLE_PIN P4_29 // (30) -#define E2_STEP_PIN P2_8 // (36) +#define E2_STEP_PIN P2_08 // (36) #define E2_DIR_PIN P2_13 // (34) #define E2_ENABLE_PIN P4_29 // (30) @@ -127,13 +127,13 @@ #define MOSFET_D_PIN -1 #endif #ifndef RAMPS_D8_PIN - #define RAMPS_D8_PIN P2_7 // (8) + #define RAMPS_D8_PIN P2_07 // (8) #endif #ifndef RAMPS_D9_PIN - #define RAMPS_D9_PIN P2_4 // (9) + #define RAMPS_D9_PIN P2_04 // (9) #endif #ifndef RAMPS_D10_PIN - #define RAMPS_D10_PIN P2_5 // (10) + #define RAMPS_D10_PIN P2_05 // (10) #endif #define HEATER_0_PIN RAMPS_D10_PIN @@ -198,8 +198,8 @@ // // Průša i3 MK2 Multiplexer Support // -#define E_MUX0_PIN P0_3 // ( 0) Z_CS_PIN -#define E_MUX1_PIN P0_2 // ( 1) E0_CS_PIN +#define E_MUX0_PIN P0_03 // ( 0) Z_CS_PIN +#define E_MUX1_PIN P0_02 // ( 1) E0_CS_PIN #define E_MUX2_PIN P0_26 // (63) E1_CS_PIN /** @@ -237,7 +237,7 @@ #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 - #define DOGLCD_A0 P2_6 // (59) J3-8 & AUX-2 + #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 #ifdef ULTIPANEL @@ -278,8 +278,8 @@ #undef LCD_PINS_ENABLE //P0_18 // (51) (MOSI) J3-10 & AUX-3 #undef LCD_PINS_D4 //P0_15 // (52) (SCK) J3-9 & AUX-3 - #undef LCD_PINS_D5 //P2_6 // (59) J3-8 & AUX-2 - #define DOGLCD_A0 P2_6 // (59) J3-8 & AUX-2 + #undef LCD_PINS_D5 //P2_06 // (59) J3-8 & AUX-2 + #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #undef LCD_PINS_D6 //P0_26 // (63) J5-3 & AUX-2 #undef LCD_PINS_D7 //P1_21 // ( 6) (SERVO1) J5-1 & SERVO connector #define DOGLCD_SCK SCK_PIN @@ -315,11 +315,11 @@ #endif #define ENET_MOC P1_16 // (70) J12-3 #define REF_CLK P1_15 // (72) J12-5 -#define ENET_RXD0 P1_9 // (74) J12-7 -#define ENET_CRS P1_8 // (76) J12-9 -#define ENET_TX_EN P1_4 // (77) J12-10 -#define ENET_TXD0 P1_0 // (78) J12-11 -#define ENET_TXD1 P1_1 // (79) J12-12 +#define ENET_RXD0 P1_09 // (74) J12-7 +#define ENET_CRS P1_08 // (76) J12-9 +#define ENET_TX_EN P1_04 // (77) J12-10 +#define ENET_TXD0 P1_00 // (78) J12-11 +#define ENET_TXD1 P1_01 // (79) J12-12 /** * Fast PWMS @@ -339,8 +339,8 @@ * P1_20 (11) SERVO0_PIN * P1_21 ( 6) SERVO1_PIN J5-1 * P0_18 ( 4) SERVO3_PIN 5V output - * *P2_4 ( 9) RAMPS_D9_PIN - * *P2_5 (10) RAMPS_D10_PIN + * *P2_04 ( 9) RAMPS_D9_PIN + * *P2_05 (10) RAMPS_D10_PIN * * * - If used as a heater driver then a Fast PWM is NOT assigned. If used as * a fan driver then enabling FAST_PWM_FAN assigns a Fast PWM to it. @@ -375,4 +375,4 @@ * 64 * 65 * 66 - */ \ No newline at end of file + */