From a2cda631d920547bd8b2d4c919b6a6e19e05b824 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 2 Jan 2020 16:33:50 -0600 Subject: [PATCH] Clean up trailing whitespace --- Marlin/src/module/stepper.h | 2 +- Marlin/src/pins/esp32/pins_MRR_ESPE.h | 4 ++-- Marlin/src/pins/stm32/pins_BTT_BTT002_V1_0.h | 2 +- Marlin/src/pins/stm32/pins_MKS_ROBIN_MINI.h | 2 +- .../PlatformIO/variants/FLY_F407ZG/ldscript.ld | 16 ++++++++-------- .../PlatformIO/variants/FLY_F407ZG/variant.h | 8 ++++---- 6 files changed, 17 insertions(+), 17 deletions(-) diff --git a/Marlin/src/module/stepper.h b/Marlin/src/module/stepper.h index 4a686d6f7..149a21163 100644 --- a/Marlin/src/module/stepper.h +++ b/Marlin/src/module/stepper.h @@ -67,7 +67,7 @@ #ifdef CPU_32_BIT /** * Duration of START_TIMED_PULSE - * + * * ...as measured on an LPC1768 with a scope and converted to cycles. * Not applicable to other 32-bit processors, but as long as others * take longer, pulses will be longer. For example the SKR Pro diff --git a/Marlin/src/pins/esp32/pins_MRR_ESPE.h b/Marlin/src/pins/esp32/pins_MRR_ESPE.h index c2e1759c1..9e01551a8 100644 --- a/Marlin/src/pins/esp32/pins_MRR_ESPE.h +++ b/Marlin/src/pins/esp32/pins_MRR_ESPE.h @@ -107,8 +107,8 @@ #define HEATER_BED_PIN 144 // 4 #define CONTROLLER_FAN_PIN 147 -//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder -//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder +//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder +//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder #define FAN1_PIN 149 // diff --git a/Marlin/src/pins/stm32/pins_BTT_BTT002_V1_0.h b/Marlin/src/pins/stm32/pins_BTT_BTT002_V1_0.h index 0aa350163..2496b8101 100644 --- a/Marlin/src/pins/stm32/pins_BTT_BTT002_V1_0.h +++ b/Marlin/src/pins/stm32/pins_BTT_BTT002_V1_0.h @@ -155,7 +155,7 @@ #define FAN_PIN PB9 // Fan0 #define FAN1_PIN PB8 // Fan1 -// HAL SPI1 pins +// HAL SPI1 pins #define CUSTOM_SPI_PINS #if ENABLED(CUSTOM_SPI_PINS) #define SCK_PIN PA5 // SPI1 SCLK diff --git a/Marlin/src/pins/stm32/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32/pins_MKS_ROBIN_MINI.h index 202ea91ed..99cb4f14f 100644 --- a/Marlin/src/pins/stm32/pins_MKS_ROBIN_MINI.h +++ b/Marlin/src/pins/stm32/pins_MKS_ROBIN_MINI.h @@ -42,7 +42,7 @@ // 2K in a AT24C16N #define EEPROM_PAGE_SIZE (uint16)0x800 // 2048 #define EEPROM_START_ADDRESS ((uint32)(0x8000000 + 512 * 1024 - 2 * EEPROM_PAGE_SIZE)) -#define E2END (EEPROM_PAGE_SIZE - 1) +#define E2END (EEPROM_PAGE_SIZE - 1) // // Note: MKS Robin mini board is using SPI2 interface. diff --git a/buildroot/share/PlatformIO/variants/FLY_F407ZG/ldscript.ld b/buildroot/share/PlatformIO/variants/FLY_F407ZG/ldscript.ld index 23ebda44b..40abfe19b 100644 --- a/buildroot/share/PlatformIO/variants/FLY_F407ZG/ldscript.ld +++ b/buildroot/share/PlatformIO/variants/FLY_F407ZG/ldscript.ld @@ -134,7 +134,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -147,11 +147,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -159,12 +159,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -191,7 +191,7 @@ SECTIONS . = . + _Min_Stack_Size; . = ALIGN(4); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h b/buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h index c13d54fa9..87033a68e 100644 --- a/buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h +++ b/buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h @@ -163,15 +163,15 @@ extern "C" { // Below SPI and I2C definitions already done in the core // Could be redefined here if differs from the default one // SPI Definitions -#define PIN_SPI_SS PF11 +#define PIN_SPI_SS PF11 #define PIN_SPI_MOSI PB15 -#define PIN_SPI_MISO PB14 -#define PIN_SPI_SCK PB13 +#define PIN_SPI_MISO PB14 +#define PIN_SPI_SCK PB13 //max6675 -//#define PIN_SPI_SS PA4 +//#define PIN_SPI_SS PA4 //#define PIN_SPI_SCK PA5 //#define PIN_SPI_MISO PA6 //#define PIN_SPI_MOSI PA7