From a54b07d3aeb44fefd231923e99459de410457b09 Mon Sep 17 00:00:00 2001 From: Sergey1560 <53866542+Sergey1560@users.noreply.github.com> Date: Fri, 27 Nov 2020 09:00:25 +0300 Subject: [PATCH] Group related homing options (#20283) Co-authored-by: Scott Lahteine --- Marlin/Configuration.h | 4 ++-- Marlin/Configuration_adv.h | 2 -- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 3320e18ab..0e529b346 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1099,8 +1099,8 @@ // @section homing -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. //#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. //#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index e6b76a413..03c9ba55e 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -854,8 +854,6 @@ // If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. //#define Z_AFTER_DEACTIVATE Z_HOME_POS -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - // Default Minimum Feedrates for printing and travel moves #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.