From a9f7e855d8c030d0d9f34f950a66824b576548b5 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 22 Aug 2020 01:22:14 -0500 Subject: [PATCH] Reformat pins files --- Marlin/src/pins/linux/pins_RAMPS_LINUX.h | 2 +- Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h | 2 +- Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h | 2 +- Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h | 2 +- Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h | 4 +- Marlin/src/pins/lpc1768/pins_MKS_SBASE.h | 2 +- Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h | 2 +- Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h | 2 +- Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h | 4 +- Marlin/src/pins/lpc1769/pins_MKS_SGEN.h | 2 +- Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h | 2 +- Marlin/src/pins/mega/pins_INTAMSYS40.h | 2 +- Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h | 2 +- Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h | 4 +- Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h | 2 +- Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h | 2 +- Marlin/src/pins/sam/pins_RADDS.h | 2 +- Marlin/src/pins/sam/pins_RAMPS_SMART.h | 2 +- Marlin/src/pins/sam/pins_RURAMPS4D_11.h | 2 +- Marlin/src/pins/sam/pins_RURAMPS4D_13.h | 2 +- Marlin/src/pins/samd/pins_RAMPS_144.h | 2 +- Marlin/src/pins/stm32f0/pins_MALYAN_M300.h | 4 +- Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h | 10 +- .../stm32f1/pins_BTT_SKR_MINI_E3_common.h | 8 +- .../src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h | 4 +- .../src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h | 8 +- Marlin/src/pins/stm32f1/pins_CHITU3D.h | 2 +- Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h | 2 +- Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h | 2 +- Marlin/src/pins/stm32f1/pins_CREALITY_V4.h | 6 +- Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h | 6 +- Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h | 6 +- Marlin/src/pins/stm32f1/pins_GTM32_MINI.h | 8 +- Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h | 8 +- Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h | 8 +- Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h | 8 +- .../src/pins/stm32f1/pins_JGAURORA_A5S_A1.h | 4 +- Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h | 2 +- Marlin/src/pins/stm32f1/pins_MALYAN_M200.h | 4 +- Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h | 2 +- .../pins/stm32f1/pins_MKS_ROBIN_E3_common.h | 2 +- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h | 11 +- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h | 4 +- .../src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h | 2 +- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h | 2 +- Marlin/src/pins/stm32f1/pins_STM32F1R.h | 148 +++++++++--------- Marlin/src/pins/stm32f1/pins_STM3R_MINI.h | 148 +++++++++--------- Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h | 2 +- Marlin/src/pins/stm32f4/pins_ARMED.h | 4 +- Marlin/src/pins/stm32f4/pins_BEAST.h | 148 +++++++++--------- .../src/pins/stm32f4/pins_BLACK_STM32F407VE.h | 2 +- .../src/pins/stm32f4/pins_BTT_BTT002_V1_0.h | 4 +- Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h | 4 +- .../pins/stm32f4/pins_BTT_SKR_PRO_common.h | 4 +- Marlin/src/pins/stm32f4/pins_FLYF407ZG.h | 4 +- Marlin/src/pins/stm32f4/pins_FYSETC_S6.h | 4 +- .../src/pins/stm32f4/pins_GENERIC_STM32F4.h | 4 +- Marlin/src/pins/stm32f4/pins_LERDGE_K.h | 4 +- Marlin/src/pins/stm32f4/pins_LERDGE_S.h | 10 +- Marlin/src/pins/stm32f4/pins_LERDGE_X.h | 6 +- Marlin/src/pins/stm32f4/pins_RUMBA32_AUS3D.h | 4 +- Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h | 2 +- Marlin/src/pins/stm32f4/pins_RUMBA32_common.h | 4 +- Marlin/src/pins/stm32f4/pins_VAKE403D.h | 2 +- Marlin/src/pins/stm32f7/pins_THE_BORG.h | 4 +- Marlin/src/pins/teensy2/pins_5DPRINT.h | 2 +- .../src/pins/teensy2/pins_PRINTRBOARD_REVF.h | 2 +- 67 files changed, 343 insertions(+), 344 deletions(-) diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h index 9361680c2..2b7909221 100644 --- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h +++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h @@ -50,7 +50,7 @@ #endif #ifndef MARLIN_EEPROM_SIZE - #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif #define IS_RAMPS_EFB diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h index 9e26a3359..fb1218068 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h @@ -182,7 +182,7 @@ #define E1_SERIAL_RX_PIN P1_01 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif /** diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h index 83543703e..69f4f2445 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h @@ -208,7 +208,7 @@ #define Z2_SERIAL_RX_PIN P1_01 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif // diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index cc35dfb0d..bfae569cc 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -30,7 +30,7 @@ #endif // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // // Steppers diff --git a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h index 7012068d6..6bba067cb 100644 --- a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h +++ b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h @@ -28,7 +28,7 @@ #define BOARD_INFO_NAME "GMARSH X6 REV1" // Ignore temp readings during develpment. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // // Enable 12MHz clock output on P1.27 pin to sync TMC2208 chip clocks @@ -97,7 +97,7 @@ #define E2_SERIAL_RX_PIN P2_06 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #else #error "TMC2208 UART configuration is required for GMarsh X6." #endif diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h index db8551c11..c89807227 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h @@ -324,7 +324,7 @@ #define E0_SERIAL_RX_PIN P0_26 // TH4 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif // UNUSED diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h index c4bc90c17..733751eb0 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h @@ -188,7 +188,7 @@ #define Z2_SERIAL_RX_PIN P1_17 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif // TMC2208 || TMC2209 // diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h index 554c060cb..32c9ad271 100644 --- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -158,7 +158,7 @@ #endif // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif // diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h index 042b724e8..8d5080b28 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h @@ -82,11 +82,11 @@ // DIGIPOT slave addresses // #ifndef DIGIPOT_I2C_ADDRESS_A - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT #endif #ifndef DIGIPOT_I2C_ADDRESS_B - #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT #endif // diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h index 23275e86b..c9f3ff7aa 100644 --- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h @@ -56,5 +56,5 @@ #define E1_SERIAL_RX_PIN P4_28 // J8-6 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif diff --git a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h index a1d3b08ca..81f5b7501 100644 --- a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h @@ -89,7 +89,7 @@ #define E0_SERIAL_RX_PIN P0_21 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif // diff --git a/Marlin/src/pins/mega/pins_INTAMSYS40.h b/Marlin/src/pins/mega/pins_INTAMSYS40.h index 19725eda2..b6ff30a4f 100644 --- a/Marlin/src/pins/mega/pins_INTAMSYS40.h +++ b/Marlin/src/pins/mega/pins_INTAMSYS40.h @@ -82,7 +82,7 @@ // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range #ifndef MOTOR_CURRENT_PWM_RANGE - #define MOTOR_CURRENT_PWM_RANGE 2000 + #define MOTOR_CURRENT_PWM_RANGE 2000 #endif #define DEFAULT_PWM_MOTOR_CURRENT { 1300, 1300, 1250 } diff --git a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h index efa991642..526c9bfc6 100644 --- a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h +++ b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h @@ -116,7 +116,7 @@ #define DIGIPOTS_I2C_SDA_E1 77 // J6 #ifndef DIGIPOT_I2C_ADDRESS_A - #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1) + #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1) #endif // diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h index a23ada0ac..5eee450fc 100644 --- a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h +++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h @@ -67,10 +67,10 @@ // DIGIPOT slave addresses #ifndef DIGIPOT_I2C_ADDRESS_A - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1) + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1) #endif #ifndef DIGIPOT_I2C_ADDRESS_B - #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1) + #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1) #endif // diff --git a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h index b2a412e30..1dc898e6c 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h @@ -64,5 +64,5 @@ #define SUICIDE_PIN 12 // Used by CR2020 Industrial series #ifndef SUICIDE_PIN_INVERTING - #define SUICIDE_PIN_INVERTING true + #define SUICIDE_PIN_INVERTING true #endif diff --git a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h index 5d8716b67..be6b0fb2e 100644 --- a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h +++ b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h @@ -147,7 +147,7 @@ #define FET_SAFETY_PIN 31 // PA7 must be pulsed low every 50 mS or FETs are turned off #define FET_SAFETY_DELAY 50 // 50 mS delay between pulses -#define FET_SAFETY_INVERTED true // true - negative going pulse of 2 uS +#define FET_SAFETY_INVERTED true // true - negative going pulse of 2 uS ///////////////////////////////////////////////////////// diff --git a/Marlin/src/pins/sam/pins_RADDS.h b/Marlin/src/pins/sam/pins_RADDS.h index 78231afaf..a0192aadb 100644 --- a/Marlin/src/pins/sam/pins_RADDS.h +++ b/Marlin/src/pins/sam/pins_RADDS.h @@ -36,7 +36,7 @@ // #if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM) #define I2C_EEPROM - #define MARLIN_EEPROM_SIZE 0x2000 // 8KB + #define MARLIN_EEPROM_SIZE 0x2000 // 8KB #endif // diff --git a/Marlin/src/pins/sam/pins_RAMPS_SMART.h b/Marlin/src/pins/sam/pins_RAMPS_SMART.h index 4c26d19ca..06eee2d97 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_SMART.h +++ b/Marlin/src/pins/sam/pins_RAMPS_SMART.h @@ -70,7 +70,7 @@ // I2C EEPROM with 4K of space #define I2C_EEPROM -#define MARLIN_EEPROM_SIZE 0x1000 +#define MARLIN_EEPROM_SIZE 0x1000 #define RESET_PIN 42 // Resets the board if the jumper is attached diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h index 22353611b..dd490e389 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h @@ -186,7 +186,7 @@ // // EEPROM // -#define MARLIN_EEPROM_SIZE 0x8000 // 32Kb (24lc256) +#define MARLIN_EEPROM_SIZE 0x8000 // 32Kb (24lc256) #define I2C_EEPROM // EEPROM on I2C-0 //#define EEPROM_SD // EEPROM on SDCARD //#define SPI_EEPROM // EEPROM on SPI-0 diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h index 19b8ac977..8a6287fb6 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h @@ -172,7 +172,7 @@ // // EEPROM // -#define MARLIN_EEPROM_SIZE 0x8000 // 32Kb (24lc256) +#define MARLIN_EEPROM_SIZE 0x8000 // 32Kb (24lc256) #define I2C_EEPROM // EEPROM on I2C-0 //#define EEPROM_SD // EEPROM on SDCARD //#define SPI_EEPROM // EEPROM on SPI-0 diff --git a/Marlin/src/pins/samd/pins_RAMPS_144.h b/Marlin/src/pins/samd/pins_RAMPS_144.h index 319584b5e..93e758b3a 100644 --- a/Marlin/src/pins/samd/pins_RAMPS_144.h +++ b/Marlin/src/pins/samd/pins_RAMPS_144.h @@ -46,7 +46,7 @@ // //#define QSPI_EEPROM // Use AGCM4 onboard QSPI EEPROM (Uses 4K of RAM) #define I2C_EEPROM // EEPROM on I2C-0 -#define MARLIN_EEPROM_SIZE 0x8000 // 32K (24lc256) +#define MARLIN_EEPROM_SIZE 0x8000 // 32K (24lc256) // // Limit Switches diff --git a/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h b/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h index b8c2ed950..d6a83aca1 100644 --- a/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h +++ b/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h @@ -43,8 +43,8 @@ // // Timers // -#define STEP_TIMER 6 -#define TEMP_TIMER 7 +#define STEP_TIMER 6 +#define TEMP_TIMER 7 // // Limit Switches diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h index 3801a9bae..cff34daf2 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h @@ -31,7 +31,7 @@ #define DISABLE_JTAG // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 #if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) #define FLASH_EEPROM_EMULATION @@ -138,7 +138,7 @@ #define E0_SERIAL_RX_PIN PD2 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif // @@ -158,7 +158,7 @@ // USB connect control // #define USB_CONNECT_PIN PC13 -#define USB_CONNECT_INVERTING false +#define USB_CONNECT_INVERTING false /** * _____ @@ -260,7 +260,7 @@ * */ - #define CLCD_SPI_BUS 1 // SPI1 connector + #define CLCD_SPI_BUS 1 // SPI1 connector #define BEEPER_PIN PB6 @@ -288,5 +288,5 @@ #error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP." #endif -#define ON_BOARD_SPI_DEVICE 1 // SPI1 +#define ON_BOARD_SPI_DEVICE 1 // SPI1 #define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h index a8df0e5c0..923b0fa4c 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h @@ -29,7 +29,7 @@ #define DISABLE_JTAG // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 #if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) #define FLASH_EEPROM_EMULATION @@ -108,7 +108,7 @@ #define USB_CONNECT_PIN PC13 #endif -#define USB_CONNECT_INVERTING false +#define USB_CONNECT_INVERTING false /** * SKR Mini E3 V1.0, V1.2 SKR Mini E3 V2.0 @@ -208,7 +208,7 @@ * */ - #define CLCD_SPI_BUS 1 // SPI1 connector + #define CLCD_SPI_BUS 1 // SPI1 connector #define BEEPER_PIN EXP1_9 @@ -236,5 +236,5 @@ #error "SD CUSTOM_CABLE is not compatible with SKR Mini E3." #endif -#define ON_BOARD_SPI_DEVICE 1 // SPI1 +#define ON_BOARD_SPI_DEVICE 1 // SPI1 #define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h index db31eb377..4a12d5d32 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h @@ -31,7 +31,7 @@ #define DISABLE_JTAG // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 #if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) #define FLASH_EEPROM_EMULATION @@ -213,5 +213,5 @@ #define MOSI_PIN PA7 #define SS_PIN PA4 #endif -#define ON_BOARD_SPI_DEVICE 1 // SPI1 +#define ON_BOARD_SPI_DEVICE 1 // SPI1 #define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card diff --git a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h index f99721f14..af1e4c114 100644 --- a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h +++ b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h @@ -43,9 +43,9 @@ // #if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) #define FLASH_EEPROM_EMULATION - #define EEPROM_PAGE_SIZE 0x800U // 2KB + #define EEPROM_PAGE_SIZE 0x800U // 2KB #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) - #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif // @@ -95,7 +95,7 @@ #define E0_SERIAL_RX_PIN PC4 // Reduce baud rate to improve software serial reliability -#define TMC_BAUD_RATE 19200 +#define TMC_BAUD_RATE 19200 // // Temperature Sensors @@ -173,7 +173,7 @@ #define SS_PIN PA4 #endif -#define ON_BOARD_SPI_DEVICE 1 // SPI1 +#define ON_BOARD_SPI_DEVICE 1 // SPI1 #define ONBOARD_SD_CS_PIN PA4 // Chip select for SD-NAND #endif diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h index e3b7d2f54..bf9a7d8e0 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -36,7 +36,7 @@ //#define I2C_EEPROM // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // // Steppers diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h index 5267888f4..54ff9a779 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h @@ -177,7 +177,7 @@ // Emulated DOGM - #define GRAPHICAL_TFT_UPSCALE 3 + #define GRAPHICAL_TFT_UPSCALE 3 #ifndef XPT2046_X_CALIBRATION #define XPT2046_X_CALIBRATION -12316 #endif diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h index d128d4e1a..a825db275 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h @@ -186,7 +186,7 @@ // Emulated DOGM #elif ENABLED(FSMC_GRAPHICAL_TFT) - #define GRAPHICAL_TFT_UPSCALE 3 + #define GRAPHICAL_TFT_UPSCALE 3 #ifndef XPT2046_X_CALIBRATION #define XPT2046_X_CALIBRATION -12316 diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h index f42d78669..9ee8aa742 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h @@ -51,10 +51,10 @@ #if ENABLED(IIC_BL24CXX_EEPROM) #define IIC_EEPROM_SDA PA11 #define IIC_EEPROM_SCL PA12 - #define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16) + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16) #else #define SDCARD_EEPROM_EMULATION // SD EEPROM until all EEPROM is BL24CXX - #define MARLIN_EEPROM_SIZE 0x800 // 2Kb + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb #endif // SPI @@ -150,7 +150,7 @@ // #define SD_DETECT_PIN PC7 #define SDCARD_CONNECTION ONBOARD -#define ON_BOARD_SPI_DEVICE 1 +#define ON_BOARD_SPI_DEVICE 1 #define ONBOARD_SD_CS_PIN PA4 // SDSS #define SDIO_SUPPORT diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h index 6a30a2cb2..ca9364a57 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h @@ -33,7 +33,7 @@ #define pins_v2_20190128 // new pins define // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // // Flash EEPROM Emulation @@ -112,7 +112,7 @@ // Stepper current PWM // #ifndef MOTOR_CURRENT_PWM_RANGE - #define MOTOR_CURRENT_PWM_RANGE 1500 // origin:2000 + #define MOTOR_CURRENT_PWM_RANGE 1500 // origin:2000 #endif #define DEFAULT_PWM_MOTOR_CURRENT { 500, 500, 400 } // origin: {1300,1300,1250} @@ -152,7 +152,7 @@ #define DOGLCD_CS PB7 #endif - //#define LCD_CONTRAST_INIT 190 + //#define LCD_CONTRAST_INIT 190 //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h index 7143176bd..1f5e70a15 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h @@ -32,7 +32,7 @@ // https://github.com/FYSETC/Cheetah // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 #define DISABLE_JTAG @@ -151,7 +151,7 @@ #define LCD_PINS_D4 PB13 // SCLK #define LCD_PINS_ENABLE PB15 // DATA MOSI - //#define LCD_CONTRAST_INIT 190 + //#define LCD_CONTRAST_INIT 190 #if ENABLED(NEWPANEL) #define BTN_EN1 PC10 @@ -172,6 +172,6 @@ #define CLCD_SOFT_SPI_MISO PB14 #define CLCD_SOFT_SPI_SCLK PB13 #else - #define CLCD_SPI_BUS 2 + #define CLCD_SPI_BUS 2 #endif #endif diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h index 03f9ce021..fe6c0b132 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h @@ -49,12 +49,12 @@ //#define DISABLE_JTAGSWD // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // Enable EEPROM Emulation for this board as it doesn't have EEPROM #if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) #define FLASH_EEPROM_EMULATION - #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif // @@ -236,6 +236,6 @@ // ESP WiFi can be soldered to J9 connector which is wired to USART2. // Must define WIFISUPPORT in Configuration.h for the printer. // -#define ESP_WIFI_MODULE_COM 2 -#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 #define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h index 3f5a39a90..716de610a 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h @@ -49,12 +49,12 @@ //#define DISABLE_JTAGSWD // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // Enable EEPROM Emulation for this board as it doesn't have EEPROM #if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) #define FLASH_EEPROM_EMULATION - #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif // @@ -230,6 +230,6 @@ // ESP WiFi can be soldered to J9 connector which is wired to USART2. // Must define WIFISUPPORT in Configuration.h for the printer. // -#define ESP_WIFI_MODULE_COM 2 -#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 #define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h index 03f9ce021..fe6c0b132 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h @@ -49,12 +49,12 @@ //#define DISABLE_JTAGSWD // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // Enable EEPROM Emulation for this board as it doesn't have EEPROM #if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) #define FLASH_EEPROM_EMULATION - #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif // @@ -236,6 +236,6 @@ // ESP WiFi can be soldered to J9 connector which is wired to USART2. // Must define WIFISUPPORT in Configuration.h for the printer. // -#define ESP_WIFI_MODULE_COM 2 -#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 #define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h index c39c89e42..1fc4fa942 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h @@ -49,12 +49,12 @@ //#define DISABLE_JTAGSWD // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // Enable EEPROM Emulation for this board as it doesn't have EEPROM #if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) #define FLASH_EEPROM_EMULATION - #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif // @@ -233,6 +233,6 @@ // ESP WiFi can be soldered to J9 connector which is wired to USART2. // Must define WIFISUPPORT in Configuration.h for the printer. // -#define ESP_WIFI_MODULE_COM 2 -#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 #define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h index dcd1c868f..d474eb25f 100644 --- a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h +++ b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h @@ -43,10 +43,10 @@ // Enable EEPROM Emulation for this board, so that we don't overwrite factory data //#define I2C_EEPROM // AT24C64 -//#define MARLIN_EEPROM_SIZE 0x8000UL // 64KB +//#define MARLIN_EEPROM_SIZE 0x8000UL // 64KB //#define FLASH_EEPROM_EMULATION -//#define MARLIN_EEPROM_SIZE 0x1000UL // 4KB +//#define MARLIN_EEPROM_SIZE 0x1000UL // 4KB //#define MARLIN_EEPROM_SIZE (EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE) * 2UL) //#define EEPROM_CHITCHAT diff --git a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h index 32e7e2993..cbc43a7ac 100644 --- a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h +++ b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h @@ -130,7 +130,7 @@ #define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h #define DOGLCD_SCK -1 -#define GRAPHICAL_TFT_UPSCALE 2 +#define GRAPHICAL_TFT_UPSCALE 2 #define TFT_WIDTH 320 #define TFT_HEIGHT 240 #define TFT_PIXEL_OFFSET_X 32 diff --git a/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h b/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h index 6a8f316b0..39c52ab0d 100644 --- a/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h +++ b/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h @@ -44,8 +44,8 @@ // On STM32F103: // PB3, PB6, PB7, and PB8 can be used with pwm, which rules out TIM2 and TIM4. // On STM32F070, 16 and 17 are in use, but 1 and 3 are available. -#define STEP_TIMER 1 -#define TEMP_TIMER 3 +#define STEP_TIMER 1 +#define TEMP_TIMER 3 // // Limit Switches diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h index 5193ddad2..1ab916583 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h @@ -212,6 +212,6 @@ // Reduce baud rate for software serial reliability #if HAS_TMC_SW_SERIAL - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h index 0f55de824..1346e8099 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h @@ -105,7 +105,7 @@ #define E0_SERIAL_RX_PIN PC11 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif // diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h index 716cb1637..cb3ab62cc 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h @@ -81,7 +81,6 @@ #define E0_STEP_PIN PD6 #define E0_DIR_PIN PD3 - // Motor current PWM pins #define MOTOR_CURRENT_PWM_XY_PIN PA6 #define MOTOR_CURRENT_PWM_Z_PIN PA7 @@ -113,7 +112,7 @@ #define SERVO0_PIN PA8 // Enable BLTOUCH support on IO0 (WIFI connector) #define MT_DET_1_PIN PA4 -#define MT_DET_PIN_INVERTING false +#define MT_DET_PIN_INVERTING false #define WIFI_IO0_PIN PC13 @@ -149,9 +148,9 @@ #define FSMC_CS_PIN PD7 // NE4 #define FSMC_RS_PIN PD11 // A0 - #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT #define FSMC_DMA_DEV DMA2 - #define FSMC_DMA_CHANNEL DMA_CH5 + #define FSMC_DMA_CHANNEL DMA_CH5 #define LCD_RESET_PIN PC6 // FSMC_RST #define LCD_BACKLIGHT_PIN PD13 @@ -163,7 +162,7 @@ #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI #endif -#elif ENABLED(TFT_320x240) //TFT32/28 +#elif ENABLED(TFT_320x240) //TFT32/28 #define TFT_RESET_PIN PC6 #define TFT_BACKLIGHT_PIN PD13 @@ -190,7 +189,7 @@ #define ILI9341_COLOR_RGB #endif -#define HAS_SPI_FLASH 1 +#define HAS_SPI_FLASH 1 #define SPI_FLASH_SIZE 0x1000000 // 16MB #if HAS_SPI_FLASH #define W25QXX_CS_PIN PB12 // Flash chip-select diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h index 6a015a470..83b3bcc42 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h @@ -188,7 +188,7 @@ #define FSMC_DMA_CHANNEL DMA_CH5 #define TOUCH_BUTTONS_HW_SPI - #define TOUCH_BUTTONS_HW_SPI_DEVICE 2 + #define TOUCH_BUTTONS_HW_SPI_DEVICE 2 #endif // LVGL Configs @@ -206,7 +206,7 @@ #define DOGLCD_SCK -1 #ifndef GRAPHICAL_TFT_UPSCALE - #define GRAPHICAL_TFT_UPSCALE 3 + #define GRAPHICAL_TFT_UPSCALE 3 #endif #ifndef TFT_WIDTH #define TFT_WIDTH 480 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h index 0f9e6eb37..228049d13 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h @@ -311,7 +311,7 @@ #endif #ifndef GRAPHICAL_TFT_UPSCALE - #define GRAPHICAL_TFT_UPSCALE 3 + #define GRAPHICAL_TFT_UPSCALE 3 #endif #ifndef TFT_PIXEL_OFFSET_Y #define TFT_PIXEL_OFFSET_Y 32 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h index 3ca59a93a..c00466677 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h @@ -41,7 +41,7 @@ // // Note: MKS Robin board is using SPI2 interface. // -//#define SPI_MODULE 2 +//#define SPI_MODULE 2 #define ENABLE_SPI2 // diff --git a/Marlin/src/pins/stm32f1/pins_STM32F1R.h b/Marlin/src/pins/stm32f1/pins_STM32F1R.h index 475f31cb7..63fb383c9 100644 --- a/Marlin/src/pins/stm32f1/pins_STM32F1R.h +++ b/Marlin/src/pins/stm32f1/pins_STM32F1R.h @@ -33,7 +33,7 @@ #define DEFAULT_MACHINE_NAME "STM32F103RET6" // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // // Limit Switches @@ -100,9 +100,9 @@ #if HAS_SPI_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) #define LCD_PINS_RS PB8 #define LCD_PINS_ENABLE PD2 @@ -118,13 +118,13 @@ #define LCD_PINS_D6 PB14 #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 #endif #endif @@ -132,125 +132,125 @@ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) - #define LCD_BACKLIGHT_PIN 39 + #define LCD_BACKLIGHT_PIN 39 #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SD_DETECT_PIN 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 47 - #define BTN_EN2 43 - #define BTN_ENC 32 - #define LCD_SDSS 53 + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS 53 #define SD_DETECT_PIN -1 - #define KILL_PIN 41 + #define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) - #define BTN_EN1 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_EN1 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_ENC -1 - #define LCD_SDSS 53 - #define SD_DETECT_PIN 49 + #define LCD_SDSS 53 + #define SD_DETECT_PIN 49 #elif ANY(VIKI2, miniVIKI) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 45 + #define DOGLCD_A0 44 + #define DOGLCD_CS 45 #define LCD_SCREEN_ROT_180 - #define BTN_EN1 22 - #define BTN_EN2 7 - #define BTN_ENC 39 + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 - #define SDSS 53 + #define SDSS 53 #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board - #define KILL_PIN 31 + #define KILL_PIN 31 - #define STAT_LED_RED_PIN 32 - #define STAT_LED_BLUE_PIN 35 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define BTN_EN1 35 - #define BTN_EN2 37 - #define BTN_ENC 31 - #define SD_DETECT_PIN 49 - #define LCD_SDSS 53 - #define KILL_PIN 41 - #define BEEPER_PIN 23 - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 - #define LCD_BACKLIGHT_PIN 33 + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 + #define SD_DETECT_PIN 49 + #define LCD_SDSS 53 + #define KILL_PIN 41 + #define BEEPER_PIN 23 + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 + #define LCD_BACKLIGHT_PIN 33 #elif ENABLED(MINIPANEL) - #define BEEPER_PIN 42 + #define BEEPER_PIN 42 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 66 - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define SDSS 53 + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + #define SDSS 53 - #define KILL_PIN 64 + #define KILL_PIN 64 // GLCD features // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 // The encoder and click button - #define BTN_EN1 40 - #define BTN_EN2 63 - #define BTN_ENC 59 + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 // not connected to a pin - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN 49 #else // Beeper on AUX-4 - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SHIFT_OUT 40 + #define SHIFT_CLK 44 + #define SHIFT_LD 42 #elif ENABLED(PANEL_ONE) - #define BTN_EN1 59 // AUX2 PIN 3 - #define BTN_EN2 63 // AUX2 PIN 4 - #define BTN_ENC 49 // AUX3 PIN 7 + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 #else - #define BTN_EN1 37 - #define BTN_EN2 35 - #define BTN_ENC 31 + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #else //#define SD_DETECT_PIN -1 // Ramps doesn't use this #endif diff --git a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h index eb7fc9493..c18642fb1 100644 --- a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h @@ -36,7 +36,7 @@ #define I2C_EEPROM // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // // Limit Switches @@ -115,9 +115,9 @@ #if HAS_SPI_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) #define LCD_PINS_RS PB8 #define LCD_PINS_ENABLE PD2 @@ -133,13 +133,13 @@ #define LCD_PINS_D6 PB14 #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 #endif #endif @@ -155,126 +155,126 @@ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) - #define LCD_BACKLIGHT_PIN 39 + #define LCD_BACKLIGHT_PIN 39 #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SD_DETECT_PIN 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 47 - #define BTN_EN2 43 - #define BTN_ENC 32 - #define LCD_SDSS 53 + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS 53 #define SD_DETECT_PIN -1 - #define KILL_PIN 41 + #define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) - #define BTN_EN1 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_EN1 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_ENC -1 - #define LCD_SDSS 53 - #define SD_DETECT_PIN 49 + #define LCD_SDSS 53 + #define SD_DETECT_PIN 49 #elif ANY(VIKI2, miniVIKI) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 45 + #define DOGLCD_A0 44 + #define DOGLCD_CS 45 #define LCD_SCREEN_ROT_180 - #define BTN_EN1 22 - #define BTN_EN2 7 - #define BTN_ENC 39 + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 - #define SDSS 53 + #define SDSS 53 #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board - #define KILL_PIN 31 + #define KILL_PIN 31 - #define STAT_LED_RED_PIN 32 - #define STAT_LED_BLUE_PIN 35 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define BTN_EN1 35 - #define BTN_EN2 37 - #define BTN_ENC 31 - #define SD_DETECT_PIN 49 - #define LCD_SDSS 53 - #define KILL_PIN 41 - #define BEEPER_PIN 23 - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 - #define LCD_BACKLIGHT_PIN 33 + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 + #define SD_DETECT_PIN 49 + #define LCD_SDSS 53 + #define KILL_PIN 41 + #define BEEPER_PIN 23 + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 + #define LCD_BACKLIGHT_PIN 33 #elif ENABLED(MINIPANEL) - #define BEEPER_PIN 42 + #define BEEPER_PIN 42 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 66 - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define SDSS 53 + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + #define SDSS 53 - #define KILL_PIN 64 + #define KILL_PIN 64 // GLCD features // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 // The encoder and click button - #define BTN_EN1 40 - #define BTN_EN2 63 - #define BTN_ENC 59 + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 // not connected to a pin - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN 49 #else // Beeper on AUX-4 - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SHIFT_OUT 40 + #define SHIFT_CLK 44 + #define SHIFT_LD 42 #elif ENABLED(PANEL_ONE) - #define BTN_EN1 59 // AUX2 PIN 3 - #define BTN_EN2 63 // AUX2 PIN 4 - #define BTN_ENC 49 // AUX3 PIN 7 + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 #else - #define BTN_EN1 37 - #define BTN_EN2 35 - #define BTN_ENC 31 + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #else //#define SD_DETECT_PIN -1 // Ramps doesn't use this #endif diff --git a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h index c0a0c016b..598db026f 100644 --- a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h @@ -92,7 +92,7 @@ // #define HEATER_0_PIN PG12 // HEATER1 #define HEATER_BED_PIN PG11 // HOT BED -#define HEATER_BED_INVERTING true +#define HEATER_BED_INVERTING true // // Fans diff --git a/Marlin/src/pins/stm32f4/pins_ARMED.h b/Marlin/src/pins/stm32f4/pins_ARMED.h index 232337f6d..696241693 100644 --- a/Marlin/src/pins/stm32f4/pins_ARMED.h +++ b/Marlin/src/pins/stm32f4/pins_ARMED.h @@ -39,7 +39,7 @@ #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #define I2C_EEPROM -#define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#define MARLIN_EEPROM_SIZE 0x1000 // 4KB // // Limit Switches @@ -225,5 +225,5 @@ #define Z2_SERIAL_RX_PIN EXT4_PIN #define Z2_SERIAL_TX_PIN EXT4_PIN - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif diff --git a/Marlin/src/pins/stm32f4/pins_BEAST.h b/Marlin/src/pins/stm32f4/pins_BEAST.h index 676f1f8c9..691b468c3 100644 --- a/Marlin/src/pins/stm32f4/pins_BEAST.h +++ b/Marlin/src/pins/stm32f4/pins_BEAST.h @@ -36,7 +36,7 @@ #define I2C_EEPROM // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // // Steppers @@ -123,9 +123,9 @@ #if HAS_SPI_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) #define LCD_PINS_RS PB8 #define LCD_PINS_ENABLE PD2 @@ -141,13 +141,13 @@ #define LCD_PINS_D6 PB14 #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 #endif #endif @@ -155,126 +155,126 @@ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) - #define LCD_BACKLIGHT_PIN 39 + #define LCD_BACKLIGHT_PIN 39 #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SD_DETECT_PIN 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 47 - #define BTN_EN2 43 - #define BTN_ENC 32 - #define LCD_SDSS 53 + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS 53 #define SD_DETECT_PIN -1 - #define KILL_PIN 41 + #define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) - #define BTN_EN1 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_EN1 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_ENC -1 - #define LCD_SDSS 53 - #define SD_DETECT_PIN 49 + #define LCD_SDSS 53 + #define SD_DETECT_PIN 49 #elif ANY(VIKI2, miniVIKI) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 45 + #define DOGLCD_A0 44 + #define DOGLCD_CS 45 #define LCD_SCREEN_ROT_180 - #define BTN_EN1 22 - #define BTN_EN2 7 - #define BTN_ENC 39 + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 - #define SDSS 53 + #define SDSS 53 #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board - #define KILL_PIN 31 + #define KILL_PIN 31 - #define STAT_LED_RED_PIN 32 - #define STAT_LED_BLUE_PIN 35 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define BTN_EN1 35 - #define BTN_EN2 37 - #define BTN_ENC 31 - #define SD_DETECT_PIN 49 - #define LCD_SDSS 53 - #define KILL_PIN 41 - #define BEEPER_PIN 23 - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 - #define LCD_BACKLIGHT_PIN 33 + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 + #define SD_DETECT_PIN 49 + #define LCD_SDSS 53 + #define KILL_PIN 41 + #define BEEPER_PIN 23 + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 + #define LCD_BACKLIGHT_PIN 33 #elif ENABLED(MINIPANEL) - #define BEEPER_PIN 42 + #define BEEPER_PIN 42 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 66 - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define SDSS 53 + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + #define SDSS 53 - #define KILL_PIN 64 + #define KILL_PIN 64 // GLCD features // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 // The encoder and click button - #define BTN_EN1 40 - #define BTN_EN2 63 - #define BTN_ENC 59 + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 // not connected to a pin - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN 49 #else // Beeper on AUX-4 - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SHIFT_OUT 40 + #define SHIFT_CLK 44 + #define SHIFT_LD 42 #elif ENABLED(PANEL_ONE) - #define BTN_EN1 59 // AUX2 PIN 3 - #define BTN_EN2 63 // AUX2 PIN 4 - #define BTN_ENC 49 // AUX3 PIN 7 + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 #else - #define BTN_EN1 37 - #define BTN_EN2 35 - #define BTN_ENC 31 + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #else //#define SD_DETECT_PIN -1 // Ramps doesn't use this #endif diff --git a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h index e6350f71d..dc0dab1cd 100644 --- a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h +++ b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h @@ -41,7 +41,7 @@ //#define I2C_EEPROM #define SRAM_EEPROM_EMULATION -#define MARLIN_EEPROM_SIZE 0x2000 // 8KB +#define MARLIN_EEPROM_SIZE 0x2000 // 8KB // // Servos diff --git a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h index 0e81237ad..d3510b1ff 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h @@ -42,7 +42,7 @@ #endif // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // // Limit Switches @@ -153,7 +153,7 @@ #define E0_SERIAL_RX_PIN PD7 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif // diff --git a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h index 776ab1d81..bc882316e 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h @@ -33,7 +33,7 @@ // Onboard I2C EEPROM #define I2C_EEPROM -#define MARLIN_EEPROM_SIZE 0x2000 // 8KB (24C64 ... 64Kb = 8KB) +#define MARLIN_EEPROM_SIZE 0x2000 // 8KB (24C64 ... 64Kb = 8KB) #define TP // Enable to define servo and probe pins @@ -223,7 +223,7 @@ #define E7_SERIAL_RX_PIN PH14 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif // diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h index b6bb854d5..e13c4a227 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h @@ -212,7 +212,7 @@ #define E2_SERIAL_RX_PIN PD6 // Reduce baud rate to improve software serial reliability - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #endif // @@ -366,7 +366,7 @@ * ￣￣ * W1 */ -#define ESP_WIFI_MODULE_COM 6 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this +#define ESP_WIFI_MODULE_COM 6 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this #define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2 #define ESP_WIFI_MODULE_RESET_PIN PG0 #define ESP_WIFI_MODULE_ENABLE_PIN PG1 diff --git a/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h index 499edc8dc..a3a5ccdff 100644 --- a/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h +++ b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h @@ -45,11 +45,11 @@ // the 128kB sector allocated for EEPROM emulation. #define FLASH_EEPROM_LEVELING #elif ENABLED(I2C_EEPROM) - #define MARLIN_EEPROM_SIZE 0x2000 // 8KB + #define MARLIN_EEPROM_SIZE 0x2000 // 8KB #endif #ifndef MARLIN_EEPROM_SIZE - #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif // diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h index 03960584f..116aa14cf 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h @@ -35,7 +35,7 @@ #endif // Change the priority to 3. Priority 2 is for software serial. -//#define TEMP_TIMER_IRQ_PRIO 3 +//#define TEMP_TIMER_IRQ_PRIO 3 // // EEPROM Emulation @@ -51,7 +51,7 @@ // 128 kB sector allocated for EEPROM emulation. #define FLASH_EEPROM_LEVELING #elif ENABLED(I2C_EEPROM) - #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif // diff --git a/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h b/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h index b84c72466..44b2e6b27 100644 --- a/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h +++ b/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h @@ -37,11 +37,11 @@ //#define I2C_EEPROM #ifndef MARLIN_EEPROM_SIZE - #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // // Limit Switches diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h index 126d57146..0f0d3d048 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h @@ -147,10 +147,10 @@ // Misc. Functions // #define SDSS PC11 -#define LED_PIN PA15 // Alive +#define LED_PIN PA15 // Alive #define PS_ON_PIN -1 #define KILL_PIN -1 -#define POWER_LOSS_PIN PA4 // Power-loss / nAC_FAULT +#define POWER_LOSS_PIN PA4 // Power-loss / nAC_FAULT #define SCK_PIN PC12 #define MISO_PIN PC8 diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_S.h b/Marlin/src/pins/stm32f4/pins_LERDGE_S.h index 8f9a4339c..d20fd5a6c 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_S.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_S.h @@ -27,8 +27,8 @@ #define BOARD_INFO_NAME "Lerdge S" #define DEFAULT_MACHINE_NAME "LERDGE" -#define STEP_TIMER 4 -#define TEMP_TIMER 2 +#define STEP_TIMER 4 +#define TEMP_TIMER 2 //#define I2C_EEPROM @@ -173,15 +173,15 @@ #if ENABLED(SPI_EEPROM) // Lerdge has an SPI EEPROM Winbond W25Q128 (128Mbits) https://www.pjrc.com/teensy/W25Q128FV.pdf - #define SPI_CHAN_EEPROM1 1 + #define SPI_CHAN_EEPROM1 1 #define SPI_EEPROM1_CS PB12 // datasheet: /CS pin, found with multimeter, not tested #define EEPROM_SCK PB13 // datasheet: CLK pin, found with multimeter, not tested #define EEPROM_MISO PB14 // datasheet: DO pin, found with multimeter, not tested #define EEPROM_MOSI PB15 // datasheet: DI pin, found with multimeter, not tested - #define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet) + #define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet) #define MARLIN_EEPROM_SIZE 16UL * (EEPROM_PAGE_SIZE) // Limit to 64KB for now... #else - #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM + #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM #endif // diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h index 745d911e3..da2851c13 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h @@ -27,8 +27,8 @@ #define BOARD_INFO_NAME "Lerdge X" #define DEFAULT_MACHINE_NAME "LERDGE" -#define STEP_TIMER 4 -#define TEMP_TIMER 2 +#define STEP_TIMER 4 +#define TEMP_TIMER 2 #define I2C_EEPROM @@ -115,7 +115,7 @@ #define KILL_PIN -1 // Lerdge supports auto-power off and power loss sense through a single pin. -#define POWER_LOSS_PIN PC14 // Power-loss / nAC_FAULT +#define POWER_LOSS_PIN PC14 // Power-loss / nAC_FAULT #define SCK_PIN PC12 #define MISO_PIN PC8 diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_AUS3D.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_AUS3D.h index de8d13c54..a60a27814 100644 --- a/Marlin/src/pins/stm32f4/pins_RUMBA32_AUS3D.h +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_AUS3D.h @@ -33,10 +33,10 @@ #if NO_EEPROM_SELECTED #if MB(RUMBA32_V1_0) #define FLASH_EEPROM_EMULATION - #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #elif MB(RUMBA32_V1_1) #define I2C_EEPROM - #define MARLIN_EEPROM_SIZE 0x2000 // 8KB (24LC64T-I/OT) + #define MARLIN_EEPROM_SIZE 0x2000 // 8KB (24LC64T-I/OT) #endif #endif diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h index d67962b1a..fe6e559bd 100644 --- a/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h @@ -37,7 +37,7 @@ #if NO_EEPROM_SELECTED #define FLASH_EEPROM_EMULATION - #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif #if ENABLED(FLASH_EEPROM_EMULATION) diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h index aa481a8b7..3b513b31c 100644 --- a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h @@ -44,8 +44,8 @@ // TIM7 is used for SERVO // TIMER_SERIAL defaults to TIM7 so we'll override it here // -#define STEP_TIMER 10 -#define TEMP_TIMER 14 +#define STEP_TIMER 10 +#define TEMP_TIMER 14 #define TIMER_SERIAL TIM9 #define HAL_TIMER_RATE F_CPU diff --git a/Marlin/src/pins/stm32f4/pins_VAKE403D.h b/Marlin/src/pins/stm32f4/pins_VAKE403D.h index 01e9da590..d34458c04 100644 --- a/Marlin/src/pins/stm32f4/pins_VAKE403D.h +++ b/Marlin/src/pins/stm32f4/pins_VAKE403D.h @@ -31,7 +31,7 @@ #define BOARD_INFO_NAME "STM32F4 VAkE" //#define I2C_EEPROM -#define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#define MARLIN_EEPROM_SIZE 0x1000 // 4KB // // Servos diff --git a/Marlin/src/pins/stm32f7/pins_THE_BORG.h b/Marlin/src/pins/stm32f7/pins_THE_BORG.h index fa4279920..756f495e4 100644 --- a/Marlin/src/pins/stm32f7/pins_THE_BORG.h +++ b/Marlin/src/pins/stm32f7/pins_THE_BORG.h @@ -31,11 +31,11 @@ #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #ifndef MARLIN_EEPROM_SIZE - #define MARLIN_EEPROM_SIZE 0x1000 + #define MARLIN_EEPROM_SIZE 0x1000 #endif // Ignore temp readings during development. -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // // Limit Switches diff --git a/Marlin/src/pins/teensy2/pins_5DPRINT.h b/Marlin/src/pins/teensy2/pins_5DPRINT.h index f473ad145..7ba1fbcf8 100644 --- a/Marlin/src/pins/teensy2/pins_5DPRINT.h +++ b/Marlin/src/pins/teensy2/pins_5DPRINT.h @@ -144,5 +144,5 @@ //DIGIPOTS slave addresses #ifndef DIGIPOT_I2C_ADDRESS_A - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1) + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1) #endif diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h index 7bf0f334f..83b17b656 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h @@ -158,7 +158,7 @@ #define DAC_STEPPER_MAX 3520 #define DAC_STEPPER_VREF 1 // internal Vref, gain 1x = 2.048V #define DAC_STEPPER_GAIN 0 -#define DAC_OR_ADDRESS 0x00 +#define DAC_OR_ADDRESS 0x00 // // Temperature Sensors