diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h index edcc9610c..4a6bdbee5 100644 --- a/Marlin/src/lcd/language/language_cz.h +++ b/Marlin/src/lcd/language/language_cz.h @@ -78,6 +78,8 @@ #define MSG_MOVE_AXIS _UxGT("Posunout osy") #define MSG_BED_LEVELING _UxGT("Vyrovnat podlozku") #define MSG_LEVEL_BED _UxGT("Vyrovnat podlozku") +#define MSG_LEVEL_CORNERS _UxGT("Vyrovnat rohy") +#define MSG_NEXT_CORNER _UxGT("Dalsi roh") #define MSG_EDITING_STOPPED _UxGT("Konec uprav site") #define MSG_UBL_DOING_G29 _UxGT("Provadim G29") @@ -95,6 +97,7 @@ #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Teplota hotendu") #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Uprava site bodu") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Upravit vlastni sit") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Doladit sit bodu") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Konec uprav site") @@ -134,13 +137,36 @@ #define MSG_UBL_STORAGE_SLOT _UxGT("Pametovy slot") #define MSG_UBL_LOAD_MESH _UxGT("Nacist sit bodu") #define MSG_UBL_SAVE_MESH _UxGT("Ulozit sit bodu") +#define MSG_MESH_LOADED _UxGT("Sit %i nactena") +#define MSG_NO_STORAGE _UxGT("Nedostatek mista") +#define MSG_MESH_SAVED _UxGT("Sit %i ulozena") #define MSG_UBL_SAVE_ERROR _UxGT("Err: Ulozit UBL") #define MSG_UBL_RESTORE_ERROR _UxGT("Err: Obnovit UBL") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Konec Z-Offsetu") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Postupne") +#define MSG_LED_CONTROL _UxGT("LED Nastaveni") +#define MSG_LEDS_ON _UxGT("Svetla Zap") +#define MSG_LEDS_OFF _UxGT("Svetla Vyp") +#define MSG_LED_PRESETS _UxGT("Svetla Predvolby") +#define MSG_SET_LEDS_RED _UxGT("Cervena") +#define MSG_SET_LEDS_ORANGE _UxGT("Oranzova") +#define MSG_SET_LEDS_YELLOW _UxGT("Zluta") +#define MSG_SET_LEDS_GREEN _UxGT("Zelena") +#define MSG_SET_LEDS_BLUE _UxGT("Modra") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Fialova") +#define MSG_SET_LEDS_WHITE _UxGT("Bila") +#define MSG_SET_LEDS_DEFAULT _UxGT("Vychozi") +#define MSG_CUSTOM_LEDS _UxGT("Vlastni svetla") +#define MSG_INTENSITY_R _UxGT("Cervena intenzita") +#define MSG_INTENSITY_G _UxGT("Zelena intezita") +#define MSG_INTENSITY_B _UxGT("Modra intenzita") +#define MSG_INTENSITY_W _UxGT("Bila intenzita") +#define MSG_LED_BRIGHTNESS _UxGT("Jas") + #define MSG_USER_MENU _UxGT("Vlastni prikazy") -#define MSG_MOVING _UxGT("Posunování...") +#define MSG_MOVING _UxGT("Posouvani...") #define MSG_FREE_XY _UxGT("Uvolnit XY") #define MSG_MOVE_X _UxGT("Posunout X") #define MSG_MOVE_Y _UxGT("Posunout Y") @@ -154,6 +180,7 @@ #define MSG_NOZZLE _UxGT("Tryska") #define MSG_BED _UxGT("Podlozka") #define MSG_FAN_SPEED _UxGT("Rychlost vent.") +#define MSG_EXTRA_FAN_SPEED _UxGT("Rychlost ex. vent.") #define MSG_FLOW _UxGT("Prutok") #define MSG_CONTROL _UxGT("Ovladani") #define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") @@ -226,11 +253,13 @@ #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") #define MSG_AUTORETRACT _UxGT("AutoRetr.") #define MSG_FILAMENTCHANGE _UxGT("Vymenit filament") #define MSG_INIT_SDCARD _UxGT("Nacist SD kartu") #define MSG_CNG_SDCARD _UxGT("Vymenit SD kartu") #define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl") +#define MSG_SKEW_FACTOR _UxGT("Faktor zkoseni") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") #define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset") @@ -265,8 +294,12 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrovat Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibrovat Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibrovat Stred") +#define MSG_DELTA_SETTINGS _UxGT("Delta nastaveni") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autokalibrace") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Nast.vysku delty") +#define MSG_DELTA_DIAG_ROD _UxGT("Diag rameno") +#define MSG_DELTA_HEIGHT _UxGT("Vyska") +#define MSG_DELTA_RADIUS _UxGT("Polomer") #define MSG_INFO_MENU _UxGT("O tiskarne") #define MSG_INFO_PRINTER_MENU _UxGT("Info o tiskarne") #define MSG_3POINT_LEVELING _UxGT("3-bodove rovnani") @@ -303,13 +336,14 @@ #define MSG_DRIVE_STRENGTH _UxGT("Buzeni motoru") #define MSG_DAC_PERCENT _UxGT("Motor %") #define MSG_DAC_EEPROM_WRITE _UxGT("Ulozit do EEPROM") - #define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:") #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Jeste vytlacit") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk") #define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. teplota je ") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Parkovani selhalo") +#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed diff --git a/Marlin/src/lcd/language/language_cz_utf8.h b/Marlin/src/lcd/language/language_cz_utf8.h index 09f9954a9..b5f3e9272 100644 --- a/Marlin/src/lcd/language/language_cz_utf8.h +++ b/Marlin/src/lcd/language/language_cz_utf8.h @@ -80,6 +80,8 @@ #define MSG_MOVE_AXIS _UxGT("Posunout osy") #define MSG_BED_LEVELING _UxGT("Vyrovnat podložku") #define MSG_LEVEL_BED _UxGT("Vyrovnat podložku") +#define MSG_LEVEL_CORNERS _UxGT("Vyrovnat rohy") +#define MSG_NEXT_CORNER _UxGT("Další roh") #define MSG_EDITING_STOPPED _UxGT("Konec úprav sítě") #define MSG_UBL_DOING_G29 _UxGT("Provádím G29") @@ -97,6 +99,7 @@ #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Teplota hotendu") #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Úprava sítě bodů") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Upravit vlastní síť") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Doladit síť bodů") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Konec úprav sítě") @@ -104,7 +107,7 @@ #define MSG_UBL_BUILD_MESH_MENU _UxGT("Vytvořit síť") #define MSG_UBL_BUILD_PLA_MESH _UxGT("Síť bodu PLA") #define MSG_UBL_BUILD_ABS_MESH _UxGT("Síť bodu ABS") -#define MSG_UBL_BUILD_COLD_MESH _UxGT("Studená síť bodu") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Studená síť bodů") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Upravit výšku sítě") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Výška") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Zkontrolovat síť") @@ -136,13 +139,36 @@ #define MSG_UBL_STORAGE_SLOT _UxGT("Paměťový slot") #define MSG_UBL_LOAD_MESH _UxGT("Načíst síť bodů") #define MSG_UBL_SAVE_MESH _UxGT("Uložit síť bodů") +#define MSG_MESH_LOADED _UxGT("Síť %i načtena") +#define MSG_MESH_SAVED _UxGT("Síť %i uložena") +#define MSG_NO_STORAGE _UxGT("Nedostatek místa") #define MSG_UBL_SAVE_ERROR _UxGT("Err: Uložit UBL") #define MSG_UBL_RESTORE_ERROR _UxGT("Err: Obnovit UBL") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Konec Z-Offsetu") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Postupně") +#define MSG_LED_CONTROL _UxGT("LED Nastavení") +#define MSG_LEDS_ON _UxGT("Světla Zap") +#define MSG_LEDS_OFF _UxGT("Světla Vyp") +#define MSG_LED_PRESETS _UxGT("Světla Předvolby") +#define MSG_SET_LEDS_RED _UxGT("Červená") +#define MSG_SET_LEDS_ORANGE _UxGT("Oranžová") +#define MSG_SET_LEDS_YELLOW _UxGT("Žlutá") +#define MSG_SET_LEDS_GREEN _UxGT("Zelená") +#define MSG_SET_LEDS_BLUE _UxGT("Modrá") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Fialová") +#define MSG_SET_LEDS_WHITE _UxGT("Bílá") +#define MSG_SET_LEDS_DEFAULT _UxGT("Výchozí") +#define MSG_CUSTOM_LEDS _UxGT("Vlastní světla") +#define MSG_INTENSITY_R _UxGT("Červená intenzita") +#define MSG_INTENSITY_G _UxGT("Zelená intezita") +#define MSG_INTENSITY_B _UxGT("Modrá intenzita") +#define MSG_INTENSITY_W _UxGT("Bílá intenzita") +#define MSG_LED_BRIGHTNESS _UxGT("Jas") + #define MSG_USER_MENU _UxGT("Vlastní příkazy") -#define MSG_MOVING _UxGT("Posouvání...") +#define MSG_MOVING _UxGT("Posouvani...") #define MSG_FREE_XY _UxGT("Uvolnit XY") #define MSG_MOVE_X _UxGT("Posunout X") #define MSG_MOVE_Y _UxGT("Posunout Y") @@ -156,6 +182,7 @@ #define MSG_NOZZLE _UxGT("Tryska") #define MSG_BED _UxGT("Podložka") #define MSG_FAN_SPEED _UxGT("Rychlost vent.") +#define MSG_EXTRA_FAN_SPEED _UxGT("Rychlost ex. vent.") #define MSG_FLOW _UxGT("Průtok") #define MSG_CONTROL _UxGT("Ovládaní") #define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") @@ -228,11 +255,13 @@ #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") #define MSG_AUTORETRACT _UxGT("AutoRetr.") #define MSG_FILAMENTCHANGE _UxGT("Vyměnit filament") #define MSG_INIT_SDCARD _UxGT("Načíst SD kartu") #define MSG_CNG_SDCARD _UxGT("Vyměnit SD kartu") #define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl") +#define MSG_SKEW_FACTOR _UxGT("Faktor zkosení") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") #define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset") @@ -267,8 +296,12 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrovat Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibrovat Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibrovat Střed") +#define MSG_DELTA_SETTINGS _UxGT("Delta nastavení") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autokalibrace") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Nast.výšku delty") +#define MSG_DELTA_DIAG_ROD _UxGT("Diag rameno") +#define MSG_DELTA_HEIGHT _UxGT("Výška") +#define MSG_DELTA_RADIUS _UxGT("Poloměr") #define MSG_INFO_MENU _UxGT("O tiskárně") #define MSG_INFO_PRINTER_MENU _UxGT("Info o tiskárně") #define MSG_3POINT_LEVELING _UxGT("3-bodové rovnání") @@ -305,13 +338,14 @@ #define MSG_DRIVE_STRENGTH _UxGT("Buzení motorů") #define MSG_DAC_PERCENT _UxGT("Motor %") #define MSG_DAC_EEPROM_WRITE _UxGT("Uložit do EEPROM") - #define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:") #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ještě vytlačit") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk") #define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. teplota je ") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Parkování selhalo") +#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed