Better name for ADC macro

This commit is contained in:
Scott Lahteine 2015-02-24 05:38:10 -08:00
parent 9c9726d469
commit aa9c1f1bed

View File

@ -1453,15 +1453,15 @@ ISR(TIMER0_COMPB_vect) {
#define SET_ADMUX_ADCSRA(pin) ADMUX = (1 << REFS0) | (pin & 0x07); ADCSRA |= 1<<ADSC #define SET_ADMUX_ADCSRA(pin) ADMUX = (1 << REFS0) | (pin & 0x07); ADCSRA |= 1<<ADSC
#ifdef MUX5 #ifdef MUX5
#define SET_ADCSRB(pin) if (pin > 7) ADCSRB = 1 << MUX5; else ADCSRB = 0; SET_ADMUX_ADCSRA(pin) #define START_ADC(pin) if (pin > 7) ADCSRB = 1 << MUX5; else ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
#else #else
#define SET_ADCSRB(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin) #define START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
#endif #endif
switch(temp_state) { switch(temp_state) {
case PrepareTemp_0: case PrepareTemp_0:
#if HAS_TEMP_0 #if HAS_TEMP_0
SET_ADCSRB(TEMP_0_PIN); START_ADC(TEMP_0_PIN);
#endif #endif
lcd_buttons_update(); lcd_buttons_update();
temp_state = MeasureTemp_0; temp_state = MeasureTemp_0;
@ -1474,7 +1474,7 @@ ISR(TIMER0_COMPB_vect) {
break; break;
case PrepareTemp_BED: case PrepareTemp_BED:
#if HAS_TEMP_BED #if HAS_TEMP_BED
SET_ADCSRB(TEMP_BED_PIN); START_ADC(TEMP_BED_PIN);
#endif #endif
lcd_buttons_update(); lcd_buttons_update();
temp_state = MeasureTemp_BED; temp_state = MeasureTemp_BED;
@ -1487,7 +1487,7 @@ ISR(TIMER0_COMPB_vect) {
break; break;
case PrepareTemp_1: case PrepareTemp_1:
#if HAS_TEMP_1 #if HAS_TEMP_1
SET_ADCSRB(TEMP_1_PIN); START_ADC(TEMP_1_PIN);
#endif #endif
lcd_buttons_update(); lcd_buttons_update();
temp_state = MeasureTemp_1; temp_state = MeasureTemp_1;
@ -1500,7 +1500,7 @@ ISR(TIMER0_COMPB_vect) {
break; break;
case PrepareTemp_2: case PrepareTemp_2:
#if HAS_TEMP_2 #if HAS_TEMP_2
SET_ADCSRB(TEMP_2_PIN); START_ADC(TEMP_2_PIN);
#endif #endif
lcd_buttons_update(); lcd_buttons_update();
temp_state = MeasureTemp_2; temp_state = MeasureTemp_2;
@ -1513,7 +1513,7 @@ ISR(TIMER0_COMPB_vect) {
break; break;
case PrepareTemp_3: case PrepareTemp_3:
#if HAS_TEMP_3 #if HAS_TEMP_3
SET_ADCSRB(TEMP_3_PIN); START_ADC(TEMP_3_PIN);
#endif #endif
lcd_buttons_update(); lcd_buttons_update();
temp_state = MeasureTemp_3; temp_state = MeasureTemp_3;
@ -1526,7 +1526,7 @@ ISR(TIMER0_COMPB_vect) {
break; break;
case Prepare_FILWIDTH: case Prepare_FILWIDTH:
#if HAS_FILAMENT_SENSOR #if HAS_FILAMENT_SENSOR
SET_ADCSRB(FILWIDTH_PIN); START_ADC(FILWIDTH_PIN);
#endif #endif
lcd_buttons_update(); lcd_buttons_update();
temp_state = Measure_FILWIDTH; temp_state = Measure_FILWIDTH;