Merge pull request #10121 from thinkyhead/bf2_misc_fixes_mar16

[2.0.x] Reduce size of "only one" sanity checks
This commit is contained in:
Scott Lahteine 2018-03-16 21:43:27 -05:00 committed by GitHub
commit ab769590a1
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 164 additions and 345 deletions

View File

@ -431,7 +431,7 @@
#else
#define E_STEPPERS 1
#endif
#define E_MANUAL E_STEPPERS
#define E_MANUAL EXTRUDERS
#elif ENABLED(MIXING_EXTRUDER)
#define E_STEPPERS MIXING_STEPPERS
#define E_MANUAL 1

View File

@ -649,36 +649,18 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
/**
* Allow only one kinematic type to be defined
*/
static_assert(1 >= 0
#if ENABLED(DELTA)
+ 1
#endif
#if ENABLED(MORGAN_SCARA)
+ 1
#endif
#if ENABLED(MAKERARM_SCARA)
+ 1
#endif
#if ENABLED(COREXY)
+ 1
#endif
#if ENABLED(COREXZ)
+ 1
#endif
#if ENABLED(COREYZ)
+ 1
#endif
#if ENABLED(COREYX)
+ 1
#endif
#if ENABLED(COREZX)
+ 1
#endif
#if ENABLED(COREZY)
+ 1
#endif
, "Please enable only one of DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY."
);
#if 1 < 0 \
+ ENABLED(DELTA) \
+ ENABLED(MORGAN_SCARA) \
+ ENABLED(MAKERARM_SCARA) \
+ ENABLED(COREXY) \
+ ENABLED(COREXZ) \
+ ENABLED(COREYZ) \
+ ENABLED(COREYX) \
+ ENABLED(COREZX) \
+ ENABLED(COREZY)
#error "Please enable only one of DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY."
#endif
/**
* Delta requirements
@ -706,30 +688,16 @@ static_assert(1 >= 0
/**
* Allow only one probe option to be defined
*/
static_assert(1 >= 0
#if ENABLED(PROBE_MANUALLY)
+ 1
#endif
#if ENABLED(FIX_MOUNTED_PROBE)
+ 1
#endif
#if HAS_Z_SERVO_ENDSTOP && DISABLED(BLTOUCH)
+ 1
#endif
#if ENABLED(BLTOUCH)
+ 1
#endif
#if ENABLED(SOLENOID_PROBE)
+ 1
#endif
#if ENABLED(Z_PROBE_ALLEN_KEY)
+ 1
#endif
#if ENABLED(Z_PROBE_SLED)
+ 1
#endif
, "Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
);
#if 1 < 0 \
+ ENABLED(PROBE_MANUALLY) \
+ ENABLED(FIX_MOUNTED_PROBE) \
+ (HAS_Z_SERVO_ENDSTOP && DISABLED(BLTOUCH)) \
+ ENABLED(BLTOUCH) \
+ ENABLED(SOLENOID_PROBE) \
+ ENABLED(Z_PROBE_ALLEN_KEY) \
+ ENABLED(Z_PROBE_SLED)
#error "Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
#endif
#if HAS_BED_PROBE
@ -820,24 +788,14 @@ static_assert(1 >= 0
/**
* Allow only one bed leveling option to be defined
*/
static_assert(1 >= 0
#if ENABLED(AUTO_BED_LEVELING_LINEAR)
+ 1
#endif
#if ENABLED(AUTO_BED_LEVELING_3POINT)
+ 1
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
+ 1
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL)
+ 1
#endif
#if ENABLED(MESH_BED_LEVELING)
+ 1
#endif
, "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
);
#if 1 < 0 \
+ ENABLED(AUTO_BED_LEVELING_LINEAR) \
+ ENABLED(AUTO_BED_LEVELING_3POINT) \
+ ENABLED(AUTO_BED_LEVELING_BILINEAR) \
+ ENABLED(AUTO_BED_LEVELING_UBL) \
+ ENABLED(MESH_BED_LEVELING)
#error "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
#endif
/**
* Bed Leveling Requirements
@ -1382,8 +1340,8 @@ static_assert(1 >= 0
* AZSMZ_12864 => ULTIMAKERCONTROLLER
* PANEL_ONE => ULTIMAKERCONTROLLER
*/
static_assert(1 >= 0
#if ENABLED(ULTIMAKERCONTROLLER) \
#if 1 < 0 \
+ ( ENABLED(ULTIMAKERCONTROLLER) \
&& DISABLED(SAV_3DGLCD) \
&& DISABLED(miniVIKI) \
&& DISABLED(VIKI2) \
@ -1391,115 +1349,46 @@ static_assert(1 >= 0
&& DISABLED(AZSMZ_12864) \
&& DISABLED(PANEL_ONE) \
&& DISABLED(MKS_12864OLED) \
&& DISABLED(MKS_12864OLED_SSD1306)
+ 1
#endif
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
&& DISABLED(MKS_12864OLED_SSD1306) ) \
+ ( ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
&& DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \
&& DISABLED(LCD_FOR_MELZI) \
&& DISABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \
&& DISABLED(MKS_12864OLED) \
&& DISABLED(MKS_12864OLED_SSD1306)
+ 1
#endif
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \
&& DISABLED(BQ_LCD_SMART_CONTROLLER)
+ 1
#endif
#if ENABLED(LCD_FOR_MELZI)
+ 1
#endif
#if ENABLED(MKS_12864OLED)
+ 1
#endif
#if ENABLED(MKS_12864OLED_SSD1306)
+ 1
#endif
#if ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
+ 1
#endif
#if ENABLED(CARTESIO_UI)
+ 1
#endif
#if ENABLED(PANEL_ONE)
+ 1
#endif
#if ENABLED(MAKRPANEL)
+ 1
#endif
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+ 1
#endif
#if ENABLED(VIKI2)
+ 1
#endif
#if ENABLED(miniVIKI)
+ 1
#endif
#if ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+ 1
#endif
#if ENABLED(AZSMZ_12864)
+ 1
#endif
#if ENABLED(G3D_PANEL)
+ 1
#endif
#if ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864)
+ 1
#endif
#if ENABLED(MKS_MINI_12864)
+ 1
#endif
#if ENABLED(REPRAPWORLD_KEYPAD) \
&& DISABLED(CARTESIO_UI) \
&& DISABLED(ZONESTAR_LCD)
+ 1
#endif
#if ENABLED(RIGIDBOT_PANEL)
+ 1
#endif
#if ENABLED(RA_CONTROL_PANEL)
+ 1
#endif
#if ENABLED(LCD_SAINSMART_I2C_1602)
+ 1
#endif
#if ENABLED(LCD_SAINSMART_I2C_2004)
+ 1
#endif
#if ENABLED(LCM1602)
+ 1
#endif
#if ENABLED(LCD_I2C_PANELOLU2)
+ 1
#endif
#if ENABLED(LCD_I2C_VIKI)
+ 1
#endif
#if ENABLED(U8GLIB_SSD1306) && DISABLED(OLED_PANEL_TINYBOY2) && DISABLED(MKS_12864OLED_SSD1306)
+ 1
#endif
#if ENABLED(SAV_3DLCD)
+ 1
#endif
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
+ 1
#endif
#if ENABLED(SAV_3DGLCD)
+ 1
#endif
#if ENABLED(OLED_PANEL_TINYBOY2)
+ 1
#endif
#if ENABLED(ZONESTAR_LCD)
+ 1
#endif
#if ENABLED(ULTI_CONTROLLER)
+ 1
#endif
, "Please select no more than one LCD controller option."
);
&& DISABLED(MKS_12864OLED_SSD1306) ) \
+ (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(BQ_LCD_SMART_CONTROLLER)) \
+ ENABLED(LCD_FOR_MELZI) \
+ ENABLED(MKS_12864OLED) \
+ ENABLED(MKS_12864OLED_SSD1306) \
+ ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \
+ ENABLED(CARTESIO_UI) \
+ ENABLED(PANEL_ONE) \
+ ENABLED(MAKRPANEL) \
+ ENABLED(REPRAPWORLD_GRAPHICAL_LCD) \
+ ENABLED(VIKI2) \
+ ENABLED(miniVIKI) \
+ ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
+ ENABLED(AZSMZ_12864) \
+ ENABLED(G3D_PANEL) \
+ (ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864)) \
+ ENABLED(MKS_MINI_12864) \
+ (ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(CARTESIO_UI) && DISABLED(ZONESTAR_LCD)) \
+ ENABLED(RIGIDBOT_PANEL) \
+ ENABLED(RA_CONTROL_PANEL) \
+ ENABLED(LCD_SAINSMART_I2C_1602) \
+ ENABLED(LCD_SAINSMART_I2C_2004) \
+ ENABLED(LCM1602) \
+ ENABLED(LCD_I2C_PANELOLU2) \
+ ENABLED(LCD_I2C_VIKI) \
+ (ENABLED(U8GLIB_SSD1306) && DISABLED(OLED_PANEL_TINYBOY2) && DISABLED(MKS_12864OLED_SSD1306)) \
+ ENABLED(SAV_3DLCD) \
+ ENABLED(BQ_LCD_SMART_CONTROLLER) \
+ ENABLED(SAV_3DGLCD) \
+ ENABLED(OLED_PANEL_TINYBOY2) \
+ ENABLED(ZONESTAR_LCD) \
+ ENABLED(ULTI_CONTROLLER)
#error "Please select no more than one LCD controller option."
#endif
/**
* Make sure HAVE_TMC26X is warranted
@ -1604,6 +1493,24 @@ static_assert(1 >= 0
#error "HAVE_TMC2208 requires at least one TMC2208 stepper to be set."
#endif
/**
* TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI)
*/
#if ENABLED(HAVE_TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
defined(X_HARDWARE_SERIAL ) \
|| defined(X2_HARDWARE_SERIAL) \
|| defined(Y_HARDWARE_SERIAL ) \
|| defined(Y2_HARDWARE_SERIAL) \
|| defined(Z_HARDWARE_SERIAL ) \
|| defined(Z2_HARDWARE_SERIAL) \
|| defined(E0_HARDWARE_SERIAL) \
|| defined(E1_HARDWARE_SERIAL) \
|| defined(E2_HARDWARE_SERIAL) \
|| defined(E3_HARDWARE_SERIAL) \
|| defined(E4_HARDWARE_SERIAL) )
#error "select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
#endif
#if ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)
#error "Enable STEALTHCHOP to use HYBRID_THRESHOLD."
#endif
@ -1634,171 +1541,83 @@ static_assert(1 >= 0
/**
* Check that each axis has only one driver selected
*/
static_assert(1 >= 0
#if ENABLED(X_IS_TMC26X)
+ 1
#endif
#if ENABLED(X_IS_TMC2130)
+ 1
#endif
#if ENABLED(X_IS_TMC2208)
+ 1
#endif
#if ENABLED(X_IS_L6470)
+ 1
#endif
, "Please enable only one stepper driver for the X axis."
);
static_assert(1 >= 0
#if ENABLED(X2_IS_TMC26X)
+ 1
#endif
#if ENABLED(X2_IS_TMC2130)
+ 1
#endif
#if ENABLED(X2_IS_TMC2208)
+ 1
#endif
#if ENABLED(X2_IS_L6470)
+ 1
#endif
, "Please enable only one stepper driver for the X2 axis."
);
static_assert(1 >= 0
#if ENABLED(Y_IS_TMC26X)
+ 1
#endif
#if ENABLED(Y_IS_TMC2130)
+ 1
#endif
#if ENABLED(Y_IS_TMC2208)
+ 1
#endif
#if ENABLED(Y_IS_L6470)
+ 1
#endif
, "Please enable only one stepper driver for the Y axis."
);
static_assert(1 >= 0
#if ENABLED(Y2_IS_TMC26X)
+ 1
#endif
#if ENABLED(Y2_IS_TMC2130)
+ 1
#endif
#if ENABLED(Y2_IS_TMC2208)
+ 1
#endif
#if ENABLED(Y2_IS_L6470)
+ 1
#endif
, "Please enable only one stepper driver for the Y2 axis."
);
static_assert(1 >= 0
#if ENABLED(Z_IS_TMC26X)
+ 1
#endif
#if ENABLED(Z_IS_TMC2130)
+ 1
#endif
#if ENABLED(Z_IS_TMC2208)
+ 1
#endif
#if ENABLED(Z_IS_L6470)
+ 1
#endif
, "Please enable only one stepper driver for the Z axis."
);
static_assert(1 >= 0
#if ENABLED(Z2_IS_TMC26X)
+ 1
#endif
#if ENABLED(Z2_IS_TMC2130)
+ 1
#endif
#if ENABLED(Z2_IS_TMC2208)
+ 1
#endif
#if ENABLED(Z2_IS_L6470)
+ 1
#endif
, "Please enable only one stepper driver for the Z2 axis."
);
static_assert(1 >= 0
#if ENABLED(E0_IS_TMC26X)
+ 1
#endif
#if ENABLED(E0_IS_TMC2130)
+ 1
#endif
#if ENABLED(E0_IS_TMC2208)
+ 1
#endif
#if ENABLED(E0_IS_L6470)
+ 1
#endif
, "Please enable only one stepper driver for the E0 axis."
);
static_assert(1 >= 0
#if ENABLED(E1_IS_TMC26X)
+ 1
#endif
#if ENABLED(E1_IS_TMC2130)
+ 1
#endif
#if ENABLED(E1_IS_TMC2208)
+ 1
#endif
#if ENABLED(E1_IS_L6470)
+ 1
#endif
, "Please enable only one stepper driver for the E1 axis."
);
static_assert(1 >= 0
#if ENABLED(E2_IS_TMC26X)
+ 1
#endif
#if ENABLED(E2_IS_TMC2130)
+ 1
#endif
#if ENABLED(E2_IS_TMC2208)
+ 1
#endif
#if ENABLED(E2_IS_L6470)
+ 1
#endif
, "Please enable only one stepper driver for the E2 axis."
);
static_assert(1 >= 0
#if ENABLED(E3_IS_TMC26X)
+ 1
#endif
#if ENABLED(E3_IS_TMC2130)
+ 1
#endif
#if ENABLED(E3_IS_TMC2208)
+ 1
#endif
#if ENABLED(E3_IS_L6470)
+ 1
#endif
, "Please enable only one stepper driver for the E3 axis."
);
static_assert(1 >= 0
#if ENABLED(E4_IS_TMC26X)
+ 1
#endif
#if ENABLED(E4_IS_TMC2130)
+ 1
#endif
#if ENABLED(E4_IS_TMC2208)
+ 1
#endif
#if ENABLED(E4_IS_L6470)
+ 1
#endif
, "Please enable only one stepper driver for the E4 axis."
);
#if 1 < 0 \
+ ENABLED(X_IS_TMC26X) \
+ ENABLED(X_IS_TMC2130) \
+ ENABLED(X_IS_TMC2208) \
+ ENABLED(X_IS_L6470)
#error "Please enable only one stepper driver for the X axis."
#endif
#if 1 < 0 \
+ ENABLED(X2_IS_TMC26X) \
+ ENABLED(X2_IS_TMC2130) \
+ ENABLED(X2_IS_TMC2208) \
+ ENABLED(X2_IS_L6470)
#error "Please enable only one stepper driver for the X2 axis."
#endif
#if 1 < 0 \
+ ENABLED(Y_IS_TMC26X) \
+ ENABLED(Y_IS_TMC2130) \
+ ENABLED(Y_IS_TMC2208) \
+ ENABLED(Y_IS_L6470)
#error "Please enable only one stepper driver for the Y axis."
#endif
#if 1 < 0 \
+ ENABLED(Y2_IS_TMC26X) \
+ ENABLED(Y2_IS_TMC2130) \
+ ENABLED(Y2_IS_TMC2208) \
+ ENABLED(Y2_IS_L6470)
#error "Please enable only one stepper driver for the Y2 axis."
#endif
#if 1 < 0 \
+ ENABLED(Z_IS_TMC26X) \
+ ENABLED(Z_IS_TMC2130) \
+ ENABLED(Z_IS_TMC2208) \
+ ENABLED(Z_IS_L6470)
#error "Please enable only one stepper driver for the Z axis."
#endif
#if 1 < 0 \
+ ENABLED(Z2_IS_TMC26X) \
+ ENABLED(Z2_IS_TMC2130) \
+ ENABLED(Z2_IS_TMC2208) \
+ ENABLED(Z2_IS_L6470)
#error "Please enable only one stepper driver for the Z2 axis."
#endif
#if 1 < 0 \
+ ENABLED(E0_IS_TMC26X) \
+ ENABLED(E0_IS_TMC2130) \
+ ENABLED(E0_IS_TMC2208) \
+ ENABLED(E0_IS_L6470)
#error "Please enable only one stepper driver for the E0 axis."
#endif
#if 1 < 0 \
+ ENABLED(E1_IS_TMC26X) \
+ ENABLED(E1_IS_TMC2130) \
+ ENABLED(E1_IS_TMC2208) \
+ ENABLED(E1_IS_L6470)
#error "Please enable only one stepper driver for the E1 axis."
#endif
#if 1 < 0 \
+ ENABLED(E2_IS_TMC26X) \
+ ENABLED(E2_IS_TMC2130) \
+ ENABLED(E2_IS_TMC2208) \
+ ENABLED(E2_IS_L6470)
#error "Please enable only one stepper driver for the E2 axis."
#endif
#if 1 < 0 \
+ ENABLED(E3_IS_TMC26X) \
+ ENABLED(E3_IS_TMC2130) \
+ ENABLED(E3_IS_TMC2208) \
+ ENABLED(E3_IS_L6470)
#error "Please enable only one stepper driver for the E3 axis."
#endif
#if 1 < 0 \
+ ENABLED(E4_IS_TMC26X) \
+ ENABLED(E4_IS_TMC2130) \
+ ENABLED(E4_IS_TMC2208) \
+ ENABLED(E4_IS_L6470)
#error "Please enable only one stepper driver for the E4 axis."
#endif
/**
* Digipot requirement