diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h index db9f85c74..89f0e1783 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h @@ -197,23 +197,23 @@ * EXP2 EXP1 */ -#define EXPA1_03_PIN P1_23 -#define EXPA1_04_PIN P1_22 -#define EXPA1_05_PIN P1_21 -#define EXPA1_06_PIN P1_20 -#define EXPA1_07_PIN P1_19 -#define EXPA1_08_PIN P1_18 -#define EXPA1_09_PIN P0_28 -#define EXPA1_10_PIN P1_30 +#define EXP1_03_PIN P1_23 +#define EXP1_04_PIN P1_22 +#define EXP1_05_PIN P1_21 +#define EXP1_06_PIN P1_20 +#define EXP1_07_PIN P1_19 +#define EXP1_08_PIN P1_18 +#define EXP1_09_PIN P0_28 +#define EXP1_10_PIN P1_30 -#define EXPA2_03_PIN -1 -#define EXPA2_04_PIN P1_31 -#define EXPA2_05_PIN P0_18 -#define EXPA2_06_PIN P3_25 -#define EXPA2_07_PIN P0_16 -#define EXPA2_08_PIN P3_26 -#define EXPA2_09_PIN P0_15 -#define EXPA2_10_PIN P0_17 +#define EXP2_03_PIN -1 +#define EXP2_04_PIN P1_31 +#define EXP2_05_PIN P0_18 +#define EXP2_06_PIN P3_25 +#define EXP2_07_PIN P0_16 +#define EXP2_08_PIN P3_26 +#define EXP2_09_PIN P0_15 +#define EXP2_10_PIN P0_17 #if HAS_WIRED_LCD #if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING) @@ -243,25 +243,25 @@ * LCD LCD */ - #define LCD_PINS_RS EXPA1_03_PIN + #define LCD_PINS_RS EXP1_03_PIN - #define BTN_EN1 EXPA1_06_PIN - #define BTN_EN2 EXPA1_04_PIN - #define BTN_ENC EXPA1_08_PIN + #define BTN_EN1 EXP1_06_PIN + #define BTN_EN2 EXP1_04_PIN + #define BTN_ENC EXP1_08_PIN - #define LCD_PINS_ENABLE EXPA1_05_PIN - #define LCD_PINS_D4 EXPA1_07_PIN + #define LCD_PINS_ENABLE EXP1_05_PIN + #define LCD_PINS_D4 EXP1_07_PIN #elif ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS EXPA1_04_PIN + #define LCD_PINS_RS EXP1_04_PIN - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN // (58) open-drain + #define BTN_EN1 EXP1_08_PIN + #define BTN_EN2 EXP1_06_PIN + #define BTN_ENC EXP1_09_PIN // (58) open-drain - #define LCD_PINS_ENABLE EXPA1_03_PIN - #define LCD_PINS_D4 EXPA1_05_PIN + #define LCD_PINS_ENABLE EXP1_03_PIN + #define LCD_PINS_D4 EXP1_05_PIN #elif HAS_ADC_BUTTONS @@ -270,60 +270,60 @@ #elif IS_TFTGLCD_PANEL #if ENABLED(TFTGLCD_PANEL_SPI) - #define TFTGLCD_CS EXPA2_08_PIN + #define TFTGLCD_CS EXP2_08_PIN #endif - #define SD_DETECT_PIN EXPA2_04_PIN + #define SD_DETECT_PIN EXP2_04_PIN #else // !CR10_STOCKDISPLAY - #define LCD_PINS_RS EXPA1_07_PIN + #define LCD_PINS_RS EXP1_07_PIN - #define BTN_EN1 EXPA2_08_PIN // (31) J3-2 & AUX-4 - #define BTN_EN2 EXPA2_06_PIN // (33) J3-4 & AUX-4 - #define BTN_ENC EXPA1_09_PIN // (58) open-drain + #define BTN_EN1 EXP2_08_PIN // (31) J3-2 & AUX-4 + #define BTN_EN2 EXP2_06_PIN // (33) J3-4 & AUX-4 + #define BTN_ENC EXP1_09_PIN // (58) open-drain - #define LCD_PINS_ENABLE EXPA1_08_PIN - #define LCD_PINS_D4 EXPA1_06_PIN + #define LCD_PINS_ENABLE EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN - #define LCD_SDSS EXPA2_07_PIN // (16) J3-7 & AUX-4 - #define SD_DETECT_PIN EXPA2_04_PIN // (49) (NOT 5V tolerant) + #define LCD_SDSS EXP2_07_PIN // (16) J3-7 & AUX-4 + #define SD_DETECT_PIN EXP2_04_PIN // (49) (NOT 5V tolerant) #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS EXPA1_08_PIN - #define DOGLCD_A0 EXPA1_07_PIN - #define DOGLCD_SCK EXPA2_09_PIN - #define DOGLCD_MOSI EXPA2_05_PIN + #define DOGLCD_CS EXP1_08_PIN + #define DOGLCD_A0 EXP1_07_PIN + #define DOGLCD_SCK EXP2_09_PIN + #define DOGLCD_MOSI EXP2_05_PIN #define LCD_BACKLIGHT_PIN -1 #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN EXPA1_05_PIN + #define RGB_LED_R_PIN EXP1_05_PIN #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN EXPA1_04_PIN + #define RGB_LED_G_PIN EXP1_04_PIN #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN EXPA1_03_PIN + #define RGB_LED_B_PIN EXP1_03_PIN #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN EXPA1_05_PIN + #define NEOPIXEL_PIN EXP1_05_PIN #endif #else // !FYSETC_MINI_12864 #if ENABLED(MKS_MINI_12864) - #define DOGLCD_CS EXPA1_05_PIN - #define DOGLCD_A0 EXPA1_04_PIN - #define DOGLCD_SCK EXPA2_09_PIN - #define DOGLCD_MOSI EXPA2_05_PIN + #define DOGLCD_CS EXP1_05_PIN + #define DOGLCD_A0 EXP1_04_PIN + #define DOGLCD_SCK EXP2_09_PIN + #define DOGLCD_MOSI EXP2_05_PIN #elif ENABLED(ENDER2_STOCKDISPLAY) @@ -339,21 +339,21 @@ * EXP1 */ - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN - #define DOGLCD_CS EXPA1_04_PIN - #define DOGLCD_A0 EXPA1_05_PIN - #define DOGLCD_SCK EXPA1_10_PIN - #define DOGLCD_MOSI EXPA1_03_PIN + #define BTN_EN1 EXP1_08_PIN + #define BTN_EN2 EXP1_06_PIN + #define BTN_ENC EXP1_09_PIN + #define DOGLCD_CS EXP1_04_PIN + #define DOGLCD_A0 EXP1_05_PIN + #define DOGLCD_SCK EXP1_10_PIN + #define DOGLCD_MOSI EXP1_03_PIN #define FORCE_SOFT_SPI #define LCD_BACKLIGHT_PIN -1 #endif #if IS_ULTIPANEL - #define LCD_PINS_D5 EXPA1_05_PIN - #define LCD_PINS_D6 EXPA1_04_PIN - #define LCD_PINS_D7 EXPA1_03_PIN + #define LCD_PINS_D5 EXP1_05_PIN + #define LCD_PINS_D6 EXP1_04_PIN + #define LCD_PINS_D7 EXP1_03_PIN #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder @@ -376,7 +376,7 @@ #endif #if SD_CONNECTION_IS(LCD) - #define SD_SS_PIN EXPA2_07_PIN + #define SD_SS_PIN EXP2_07_PIN #endif /** diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h index dfe86b12b..c7555a779 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h @@ -243,29 +243,29 @@ * EXP2 EXP1 */ -#define EXPA1_03_PIN P1_23 -#define EXPA1_04_PIN P1_22 -#define EXPA1_05_PIN P1_21 -#define EXPA1_06_PIN P1_20 -#define EXPA1_07_PIN P1_19 -#define EXPA1_08_PIN P1_18 -#define EXPA1_09_PIN P0_28 -#define EXPA1_10_PIN P1_30 +#define EXP1_03_PIN P1_23 +#define EXP1_04_PIN P1_22 +#define EXP1_05_PIN P1_21 +#define EXP1_06_PIN P1_20 +#define EXP1_07_PIN P1_19 +#define EXP1_08_PIN P1_18 +#define EXP1_09_PIN P0_28 +#define EXP1_10_PIN P1_30 -#define EXPA2_03_PIN -1 -#define EXPA2_04_PIN P1_31 -#define EXPA2_05_PIN P0_18 -#define EXPA2_06_PIN P3_25 -#define EXPA2_07_PIN P0_16 -#define EXPA2_08_PIN P3_26 -#define EXPA2_09_PIN P0_15 -#define EXPA2_10_PIN P0_17 +#define EXP2_03_PIN -1 +#define EXP2_04_PIN P1_31 +#define EXP2_05_PIN P0_18 +#define EXP2_06_PIN P3_25 +#define EXP2_07_PIN P0_16 +#define EXP2_08_PIN P3_26 +#define EXP2_09_PIN P0_15 +#define EXP2_10_PIN P0_17 // // SD Connection // #if SD_CONNECTION_IS(LCD) - #define SD_SS_PIN EXPA2_07_PIN + #define SD_SS_PIN EXP2_07_PIN #endif /** @@ -282,12 +282,12 @@ #if ENABLED(DWIN_CREALITY_LCD) // RET6 DWIN ENCODER LCD - #define BTN_ENC P1_20 - #define BTN_EN1 P1_23 - #define BTN_EN2 P1_22 + #define BTN_ENC P1_20 + #define BTN_EN1 P1_23 + #define BTN_EN2 P1_22 #ifndef BEEPER_PIN - #define BEEPER_PIN P1_21 + #define BEEPER_PIN P1_21 #undef SPEAKER #endif @@ -315,15 +315,15 @@ * LCD LCD */ - #define LCD_PINS_RS EXPA1_07_PIN + #define LCD_PINS_RS EXP1_07_PIN - #define BTN_EN1 EXPA1_05_PIN - #define BTN_EN2 EXPA1_04_PIN - #define BTN_ENC EXPA1_10_PIN + #define BTN_EN1 EXP1_05_PIN + #define BTN_EN2 EXP1_04_PIN + #define BTN_ENC EXP1_10_PIN - #define LCD_PINS_ENABLE EXPA1_08_PIN - #define LCD_PINS_D4 EXPA1_06_PIN - #define BEEPER_PIN EXPA1_03_PIN + #define LCD_PINS_ENABLE EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN + #define BEEPER_PIN EXP1_03_PIN #elif ENABLED(ANET_FULL_GRAPHICS_LCD) #error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue." @@ -349,26 +349,26 @@ * LCD LCD */ - #define LCD_PINS_RS EXPA1_03_PIN + #define LCD_PINS_RS EXP1_03_PIN - #define BTN_EN1 EXPA1_06_PIN - #define BTN_EN2 EXPA1_04_PIN - #define BTN_ENC EXPA1_08_PIN + #define BTN_EN1 EXP1_06_PIN + #define BTN_EN2 EXP1_04_PIN + #define BTN_ENC EXP1_08_PIN - #define LCD_PINS_ENABLE EXPA1_05_PIN - #define LCD_PINS_D4 EXPA1_07_PIN + #define LCD_PINS_ENABLE EXP1_05_PIN + #define LCD_PINS_D4 EXP1_07_PIN - #define BEEPER_PIN EXPA1_10_PIN + #define BEEPER_PIN EXP1_10_PIN #elif ENABLED(CR10_STOCKDISPLAY) - #define BTN_ENC EXPA1_09_PIN // (58) open-drain - #define LCD_PINS_RS EXPA1_04_PIN + #define BTN_ENC EXP1_09_PIN // (58) open-drain + #define LCD_PINS_RS EXP1_04_PIN - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN + #define BTN_EN1 EXP1_08_PIN + #define BTN_EN2 EXP1_06_PIN - #define LCD_PINS_ENABLE EXPA1_03_PIN - #define LCD_PINS_D4 EXPA1_05_PIN + #define LCD_PINS_ENABLE EXP1_03_PIN + #define LCD_PINS_D4 EXP1_05_PIN #elif ENABLED(ENDER2_STOCKDISPLAY) @@ -383,36 +383,36 @@ * EXP1 */ - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN + #define BTN_EN1 EXP1_08_PIN + #define BTN_EN2 EXP1_06_PIN + #define BTN_ENC EXP1_09_PIN - #define DOGLCD_CS EXPA1_04_PIN - #define DOGLCD_A0 EXPA1_05_PIN - #define DOGLCD_SCK EXPA1_10_PIN - #define DOGLCD_MOSI EXPA1_03_PIN + #define DOGLCD_CS EXP1_04_PIN + #define DOGLCD_A0 EXP1_05_PIN + #define DOGLCD_SCK EXP1_10_PIN + #define DOGLCD_MOSI EXP1_03_PIN #define FORCE_SOFT_SPI #define LCD_BACKLIGHT_PIN -1 #elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI - #define TFT_CS_PIN EXPA1_04_PIN - #define TFT_A0_PIN EXPA1_03_PIN - #define TFT_DC_PIN EXPA1_03_PIN - #define TFT_MISO_PIN EXPA2_10_PIN - #define TFT_BACKLIGHT_PIN EXPA1_08_PIN - #define TFT_RESET_PIN EXPA1_07_PIN + #define TFT_CS_PIN EXP1_04_PIN + #define TFT_A0_PIN EXP1_03_PIN + #define TFT_DC_PIN EXP1_03_PIN + #define TFT_MISO_PIN EXP2_10_PIN + #define TFT_BACKLIGHT_PIN EXP1_08_PIN + #define TFT_RESET_PIN EXP1_07_PIN #define LCD_USE_DMA_SPI - #define TOUCH_INT_PIN EXPA1_05_PIN - #define TOUCH_CS_PIN EXPA1_06_PIN + #define TOUCH_INT_PIN EXP1_05_PIN + #define TOUCH_CS_PIN EXP1_06_PIN #define TOUCH_BUTTONS_HW_SPI #define TOUCH_BUTTONS_HW_SPI_DEVICE 1 // SPI 1 - #define SD_SCK_PIN EXPA2_09_PIN - #define SD_MISO_PIN EXPA2_10_PIN - #define SD_MOSI_PIN EXPA2_05_PIN + #define SD_SCK_PIN EXP2_09_PIN + #define SD_MISO_PIN EXP2_10_PIN + #define SD_MOSI_PIN EXP2_05_PIN // Disable any LCD related PINs config #define LCD_PINS_ENABLE -1 @@ -423,72 +423,72 @@ #elif IS_TFTGLCD_PANEL #if ENABLED(TFTGLCD_PANEL_SPI) - #define TFTGLCD_CS EXPA2_08_PIN + #define TFTGLCD_CS EXP2_08_PIN #endif - #define SD_DETECT_PIN EXPA2_04_PIN + #define SD_DETECT_PIN EXP2_04_PIN #else - #define BTN_ENC EXPA1_09_PIN // (58) open-drain - #define LCD_PINS_RS EXPA1_07_PIN + #define BTN_ENC EXP1_09_PIN // (58) open-drain + #define LCD_PINS_RS EXP1_07_PIN - #define BTN_EN1 EXPA2_08_PIN // (31) J3-2 & AUX-4 - #define BTN_EN2 EXPA2_06_PIN // (33) J3-4 & AUX-4 + #define BTN_EN1 EXP2_08_PIN // (31) J3-2 & AUX-4 + #define BTN_EN2 EXP2_06_PIN // (33) J3-4 & AUX-4 - #define LCD_PINS_ENABLE EXPA1_08_PIN - #define LCD_PINS_D4 EXPA1_06_PIN + #define LCD_PINS_ENABLE EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN - #define LCD_SDSS EXPA2_07_PIN // (16) J3-7 & AUX-4 + #define LCD_SDSS EXP2_07_PIN // (16) J3-7 & AUX-4 #if SD_CONNECTION_IS(LCD) - #define SD_DETECT_PIN EXPA2_04_PIN // (49) (NOT 5V tolerant) + #define SD_DETECT_PIN EXP2_04_PIN // (49) (NOT 5V tolerant) #endif #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS EXPA1_08_PIN - #define DOGLCD_A0 EXPA1_07_PIN - #define DOGLCD_SCK EXPA2_09_PIN - #define DOGLCD_MOSI EXPA2_05_PIN + #define DOGLCD_CS EXP1_08_PIN + #define DOGLCD_A0 EXP1_07_PIN + #define DOGLCD_SCK EXP2_09_PIN + #define DOGLCD_MOSI EXP2_05_PIN #define LCD_BACKLIGHT_PIN -1 #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN EXPA1_05_PIN + #define RGB_LED_R_PIN EXP1_05_PIN #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN EXPA1_04_PIN + #define RGB_LED_G_PIN EXP1_04_PIN #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN EXPA1_03_PIN + #define RGB_LED_B_PIN EXP1_03_PIN #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN EXPA1_05_PIN + #define NEOPIXEL_PIN EXP1_05_PIN #endif #else // !FYSETC_MINI_12864 #if ENABLED(MKS_MINI_12864) - #define DOGLCD_CS EXPA1_05_PIN - #define DOGLCD_A0 EXPA1_04_PIN - #define DOGLCD_SCK EXPA2_09_PIN - #define DOGLCD_MOSI EXPA2_05_PIN + #define DOGLCD_CS EXP1_05_PIN + #define DOGLCD_A0 EXP1_04_PIN + #define DOGLCD_SCK EXP2_09_PIN + #define DOGLCD_MOSI EXP2_05_PIN #define FORCE_SOFT_SPI #endif #if IS_ULTIPANEL - #define LCD_PINS_D5 EXPA1_05_PIN - #define LCD_PINS_D6 EXPA1_04_PIN - #define LCD_PINS_D7 EXPA1_03_PIN + #define LCD_PINS_D5 EXP1_05_PIN + #define LCD_PINS_D6 EXP1_04_PIN + #define LCD_PINS_D7 EXP1_03_PIN #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define BTN_ENC_EN EXPA1_03_PIN // Detect the presence of the encoder + #define BTN_ENC_EN EXP1_03_PIN // Detect the presence of the encoder #endif #endif diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index 80d61d9c4..82799c1cd 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -143,46 +143,46 @@ */ // M1 on Driver Expansion Module - #define E2_STEP_PIN EXPA2_05_PIN - #define E2_DIR_PIN EXPA2_06_PIN - #define E2_ENABLE_PIN EXPA2_04_PIN + #define E2_STEP_PIN EXP2_05_PIN + #define E2_DIR_PIN EXP2_06_PIN + #define E2_ENABLE_PIN EXP2_04_PIN #if !EXP_MOT_USE_EXP2_ONLY - #define E2_DIAG_PIN EXPA1_06_PIN - #define E2_CS_PIN EXPA1_05_PIN + #define E2_DIAG_PIN EXP1_06_PIN + #define E2_CS_PIN EXP1_05_PIN #if HAS_TMC_UART - #define E2_SERIAL_TX_PIN EXPA1_05_PIN - #define E2_SERIAL_RX_PIN EXPA1_05_PIN + #define E2_SERIAL_TX_PIN EXP1_05_PIN + #define E2_SERIAL_RX_PIN EXP1_05_PIN #endif #endif // M2 on Driver Expansion Module - #define E3_STEP_PIN EXPA2_08_PIN - #define E3_DIR_PIN EXPA2_07_PIN + #define E3_STEP_PIN EXP2_08_PIN + #define E3_DIR_PIN EXP2_07_PIN #if !EXP_MOT_USE_EXP2_ONLY - #define E3_ENABLE_PIN EXPA1_03_PIN - #define E3_DIAG_PIN EXPA1_08_PIN - #define E3_CS_PIN EXPA1_07_PIN + #define E3_ENABLE_PIN EXP1_03_PIN + #define E3_DIAG_PIN EXP1_08_PIN + #define E3_CS_PIN EXP1_07_PIN #if HAS_TMC_UART - #define E3_SERIAL_TX_PIN EXPA1_07_PIN - #define E3_SERIAL_RX_PIN EXPA1_07_PIN + #define E3_SERIAL_TX_PIN EXP1_07_PIN + #define E3_SERIAL_RX_PIN EXP1_07_PIN #endif #else - #define E3_ENABLE_PIN EXPA2_04_PIN + #define E3_ENABLE_PIN EXP2_04_PIN #endif // M3 on Driver Expansion Module - #define E4_STEP_PIN EXPA2_10_PIN - #define E4_DIR_PIN EXPA2_09_PIN + #define E4_STEP_PIN EXP2_10_PIN + #define E4_DIR_PIN EXP2_09_PIN #if !EXP_MOT_USE_EXP2_ONLY - #define E4_ENABLE_PIN EXPA1_04_PIN - #define E4_DIAG_PIN EXPA1_10_PIN - #define E4_CS_PIN EXPA1_09_PIN + #define E4_ENABLE_PIN EXP1_04_PIN + #define E4_DIAG_PIN EXP1_10_PIN + #define E4_CS_PIN EXP1_09_PIN #if HAS_TMC_UART - #define E4_SERIAL_TX_PIN EXPA1_09_PIN - #define E4_SERIAL_RX_PIN EXPA1_09_PIN + #define E4_SERIAL_TX_PIN EXP1_09_PIN + #define E4_SERIAL_RX_PIN EXP1_09_PIN #endif #else - #define E4_ENABLE_PIN EXPA2_04_PIN + #define E4_ENABLE_PIN EXP2_04_PIN #endif #endif // HAS_BTT_EXP_MOT diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h index 6e498ba6a..7c63ba20b 100644 --- a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h +++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h @@ -190,51 +190,51 @@ * EXP */ -#define EXPA1_03_PIN P0_18 -#define EXPA1_04_PIN P0_17 -#define EXPA1_05_PIN P0_15 -#define EXPA1_06_PIN P0_20 -#define EXPA1_07_PIN -1 -#define EXPA1_08_PIN P0_19 -#define EXPA1_09_PIN P0_16 -#define EXPA1_10_PIN P2_08 +#define EXP1_03_PIN P0_18 +#define EXP1_04_PIN P0_17 +#define EXP1_05_PIN P0_15 +#define EXP1_06_PIN P0_20 +#define EXP1_07_PIN -1 +#define EXP1_08_PIN P0_19 +#define EXP1_09_PIN P0_16 +#define EXP1_10_PIN P2_08 #if HAS_WIRED_LCD #if ENABLED(CR10_STOCKDISPLAY) - #define BEEPER_PIN EXPA1_10_PIN + #define BEEPER_PIN EXP1_10_PIN - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN + #define BTN_EN1 EXP1_08_PIN + #define BTN_EN2 EXP1_06_PIN + #define BTN_ENC EXP1_09_PIN - #define LCD_PINS_RS EXPA1_04_PIN - #define LCD_PINS_ENABLE EXPA1_03_PIN - #define LCD_PINS_D4 EXPA1_05_PIN + #define LCD_PINS_RS EXP1_04_PIN + #define LCD_PINS_ENABLE EXP1_03_PIN + #define LCD_PINS_D4 EXP1_05_PIN #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_E3_TURBO.h' for details. Comment out this line to continue." - #define LCD_PINS_RS EXPA1_05_PIN - #define LCD_PINS_ENABLE EXPA1_09_PIN - #define LCD_PINS_D4 EXPA1_04_PIN - #define LCD_PINS_D5 EXPA1_06_PIN - #define LCD_PINS_D6 EXPA1_08_PIN - #define LCD_PINS_D7 EXPA1_10_PIN + #define LCD_PINS_RS EXP1_05_PIN + #define LCD_PINS_ENABLE EXP1_09_PIN + #define LCD_PINS_D4 EXP1_04_PIN + #define LCD_PINS_D5 EXP1_06_PIN + #define LCD_PINS_D6 EXP1_08_PIN + #define LCD_PINS_D7 EXP1_10_PIN #define ADC_KEYPAD_PIN P1_23 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD! #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN + #define BTN_EN1 EXP1_08_PIN + #define BTN_EN2 EXP1_06_PIN + #define BTN_ENC EXP1_09_PIN - #define DOGLCD_CS EXPA1_04_PIN - #define DOGLCD_A0 EXPA1_05_PIN - #define DOGLCD_SCK EXPA1_10_PIN - #define DOGLCD_MOSI EXPA1_03_PIN + #define DOGLCD_CS EXP1_04_PIN + #define DOGLCD_A0 EXP1_05_PIN + #define DOGLCD_SCK EXP1_10_PIN + #define DOGLCD_MOSI EXP1_03_PIN #define FORCE_SOFT_SPI #define LCD_BACKLIGHT_PIN -1 diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index 3f22d2a53..fe416dfb6 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -124,14 +124,14 @@ #define X_DIR_PIN 55 #define X_ENABLE_PIN 38 #ifndef X_CS_PIN - #define X_CS_PIN 53 + #define X_CS_PIN EXP2_07_PIN #endif #define Y_STEP_PIN 60 #define Y_DIR_PIN 61 #define Y_ENABLE_PIN 56 #ifndef Y_CS_PIN - #define Y_CS_PIN 49 + #define Y_CS_PIN EXP2_04_PIN #endif #ifndef Z_STEP_PIN @@ -245,7 +245,7 @@ // // Misc. Functions // -#define SDSS 53 +#define SDSS EXP2_07_PIN #define LED_PIN 13 #ifndef FILWIDTH_PIN @@ -429,10 +429,57 @@ #define E_MUX2_PIN 44 // E1_CS_PIN #endif +// +// Aux 3 GND D52 D50 5V +// NC D53 D51 D49 + +// +// Aux 4 D16 D17 D23 D25 D27 D29 D31 D33 D35 D37 D39 D41 D43 D45 D47 D32 GND 5V +// + +/** + * LCD adapter. Please note: These comes in two variants. The socket keys can be + * on either side, and may be backwards on some boards / displays. + * _____ _____ + * D37 |10 9 | D35 (MISO) D50 |10 9 | D52 (SCK) + * D17 | 8 7 | D16 D31 | 8 7 | D53 + * D23 6 5 D25 D33 6 5 D51 (MOSI) + * D27 | 4 3 | D29 D49 | 4 3 | D41 + * GND | 2 1 | 5V GND | 2 1 | NC + * ----- ----- + * EXP1 EXP2 + */ + +#ifndef EXP1_03_PIN + #define EXP1_03_PIN 29 + #define EXP1_04_PIN 27 + #define EXP1_05_PIN 25 + #define EXP1_06_PIN 23 + #define EXP1_07_PIN 16 + #define EXP1_08_PIN 17 + #define EXP1_09_PIN 35 + #define EXP1_10_PIN 37 + + #define EXP2_03_PIN 41 + #define EXP2_04_PIN 49 + #define EXP2_05_PIN 51 + #define EXP2_06_PIN 33 + #define EXP2_07_PIN 53 + #define EXP2_08_PIN 31 + #define EXP2_09_PIN 52 + #define EXP2_10_PIN 50 +#endif + ////////////////////////// // LCDs and Controllers // ////////////////////////// +// GLCD features +// Uncomment screen orientation +//#define LCD_SCREEN_ROT_90 +//#define LCD_SCREEN_ROT_180 +//#define LCD_SCREEN_ROT_270 + #if HAS_WIRED_LCD // @@ -440,9 +487,9 @@ // #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock + #define LCD_PINS_RS EXP2_04_PIN // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE EXP2_05_PIN // SID (MOSI) + #define LCD_PINS_D4 EXP2_09_PIN // SCK (CLK) clock #elif BOTH(IS_NEWPANEL, PANEL_ONE) @@ -455,18 +502,18 @@ #elif ENABLED(TFTGLCD_PANEL_SPI) - #define TFTGLCD_CS 33 + #define TFTGLCD_CS EXP2_06_PIN #else #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS 27 - #define LCD_PINS_ENABLE 29 - #define LCD_PINS_D4 25 + #define LCD_PINS_RS EXP1_04_PIN + #define LCD_PINS_ENABLE EXP1_03_PIN + #define LCD_PINS_D4 EXP1_05_PIN #if !IS_NEWPANEL - #define BEEPER_PIN 37 + #define BEEPER_PIN EXP1_10_PIN #endif #elif ENABLED(ZONESTAR_LCD) @@ -482,25 +529,25 @@ #else #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) - #define LCD_PINS_DC 25 // Set as output on init - #define LCD_PINS_RS 27 // Pull low for 1s to init + #define LCD_PINS_DC EXP1_05_PIN // Set as output on init + #define LCD_PINS_RS EXP1_04_PIN // Pull low for 1s to init // DOGM SPI LCD Support #define DOGLCD_A0 LCD_PINS_DC - #define DOGLCD_CS 16 - #define DOGLCD_MOSI 17 - #define DOGLCD_SCK 23 + #define DOGLCD_CS EXP1_07_PIN + #define DOGLCD_MOSI EXP1_08_PIN + #define DOGLCD_SCK EXP1_06_PIN #else - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 + #define LCD_PINS_RS EXP1_07_PIN + #define LCD_PINS_ENABLE EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN + #define LCD_PINS_D5 EXP1_05_PIN + #define LCD_PINS_D6 EXP1_04_PIN #endif - #define LCD_PINS_D7 29 + #define LCD_PINS_D7 EXP1_03_PIN #if !IS_NEWPANEL - #define BEEPER_PIN 33 + #define BEEPER_PIN EXP2_06_PIN #endif #endif @@ -511,7 +558,7 @@ //#define SHIFT_CLK_PIN 38 //#define SHIFT_LD_PIN 42 //#define SHIFT_OUT_PIN 40 - //#define SHIFT_EN_PIN 17 + //#define SHIFT_EN_PIN EXP1_08_PIN #endif #endif @@ -527,22 +574,22 @@ #if IS_RRD_SC - #define BEEPER_PIN 37 + #define BEEPER_PIN EXP1_10_PIN #if ENABLED(CR10_STOCKDISPLAY) - #define BTN_EN1 17 - #define BTN_EN2 23 + #define BTN_EN1 EXP1_08_PIN + #define BTN_EN2 EXP1_06_PIN #else - #define BTN_EN1 31 - #define BTN_EN2 33 + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN #endif - #define BTN_ENC 35 + #define BTN_ENC EXP1_09_PIN #ifndef SD_DETECT_PIN - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN EXP2_04_PIN #endif #ifndef KILL_PIN - #define KILL_PIN 41 + #define KILL_PIN EXP2_03_PIN #endif #if ENABLED(BQ_LCD_SMART_CONTROLLER) @@ -562,7 +609,7 @@ #define BTN_EN2 43 #define BTN_ENC 32 #define LCD_SDSS SDSS - #define KILL_PIN 41 + #define KILL_PIN EXP2_03_PIN #elif ENABLED(LCD_I2C_VIKI) @@ -571,7 +618,7 @@ #define BTN_ENC -1 #define LCD_SDSS SDSS - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN EXP2_04_PIN #elif ANY(VIKI2, miniVIKI) @@ -579,87 +626,81 @@ #define DOGLCD_A0 44 #define LCD_SCREEN_ROT_180 - #define BEEPER_PIN 33 + #define BEEPER_PIN EXP2_06_PIN #define STAT_LED_RED_PIN 32 - #define STAT_LED_BLUE_PIN 35 + #define STAT_LED_BLUE_PIN EXP1_09_PIN #define BTN_EN1 22 #define BTN_EN2 7 #define BTN_ENC 39 #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board - #define KILL_PIN 31 + #define KILL_PIN EXP2_08_PIN #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 + #define DOGLCD_CS EXP1_03_PIN + #define DOGLCD_A0 EXP1_04_PIN - #define BEEPER_PIN 23 - #define LCD_BACKLIGHT_PIN 33 + #define BEEPER_PIN EXP1_06_PIN + #define LCD_BACKLIGHT_PIN EXP2_06_PIN - #define BTN_EN1 35 - #define BTN_EN2 37 - #define BTN_ENC 31 + #define BTN_EN1 EXP1_09_PIN + #define BTN_EN2 EXP1_10_PIN + #define BTN_ENC EXP2_08_PIN #define LCD_SDSS SDSS - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN EXP2_04_PIN + #define KILL_PIN EXP2_03_PIN #elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864) - #define BEEPER_PIN 37 - #define BTN_ENC 35 - #define SD_DETECT_PIN 49 + #define BEEPER_PIN EXP1_10_PIN + #define BTN_ENC EXP1_09_PIN + #define SD_DETECT_PIN EXP2_04_PIN #ifndef KILL_PIN - #define KILL_PIN 41 + #define KILL_PIN EXP2_03_PIN #endif #if ENABLED(MKS_MINI_12864) - #define DOGLCD_A0 27 - #define DOGLCD_CS 25 - - // GLCD features - // Uncomment screen orientation - //#define LCD_SCREEN_ROT_90 - //#define LCD_SCREEN_ROT_180 - //#define LCD_SCREEN_ROT_270 + #define DOGLCD_A0 EXP1_04_PIN + #define DOGLCD_CS EXP1_05_PIN // not connected to a pin #define LCD_BACKLIGHT_PIN -1 // 65 (MKS mini12864 can't adjust backlight by software!) - #define BTN_EN1 31 - #define BTN_EN2 33 + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN #elif ENABLED(FYSETC_MINI_12864) // From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 - #define DOGLCD_A0 16 - #define DOGLCD_CS 17 + #define DOGLCD_A0 EXP1_07_PIN + #define DOGLCD_CS EXP1_08_PIN - #define BTN_EN1 33 - #define BTN_EN2 31 + #define BTN_EN1 EXP2_06_PIN + #define BTN_EN2 EXP2_08_PIN //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN 25 + #define RGB_LED_R_PIN EXP1_05_PIN #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN 27 + #define RGB_LED_G_PIN EXP1_04_PIN #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN 29 + #define RGB_LED_B_PIN EXP1_03_PIN #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN 25 + #define NEOPIXEL_PIN EXP1_05_PIN #endif #endif @@ -673,17 +714,11 @@ #define DOGLCD_A0 44 #define DOGLCD_CS 66 - // GLCD features - // Uncomment screen orientation - //#define LCD_SCREEN_ROT_90 - //#define LCD_SCREEN_ROT_180 - //#define LCD_SCREEN_ROT_270 - #define BTN_EN1 40 #define BTN_EN2 63 #define BTN_ENC 59 - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN EXP2_04_PIN #define KILL_PIN 64 #elif ENABLED(ZONESTAR_LCD) @@ -699,27 +734,27 @@ #elif IS_TFTGLCD_PANEL - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN EXP2_04_PIN #else // Beeper on AUX-4 - #define BEEPER_PIN 33 + #define BEEPER_PIN EXP2_06_PIN // Buttons are directly attached to AUX-2 #if ENABLED(PANEL_ONE) #define BTN_EN1 59 // AUX2 PIN 3 #define BTN_EN2 63 // AUX2 PIN 4 - #define BTN_ENC 49 // AUX3 PIN 7 + #define BTN_ENC EXP2_04_PIN #else - #define BTN_EN1 37 - #define BTN_EN2 35 - #define BTN_ENC 31 + #define BTN_EN1 EXP1_10_PIN + #define BTN_EN2 EXP1_09_PIN + #define BTN_ENC EXP2_08_PIN #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN EXP2_04_PIN + #define KILL_PIN EXP2_03_PIN #endif #endif @@ -746,7 +781,8 @@ #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_RAMPS.h' for details. Comment out this line to continue." - /** FYSETC TFT TFT81050 display pinout + /** + * FYSETC TFT-81050 display pinout * * Board Display * _____ _____ @@ -771,16 +807,16 @@ * EXP2-7 ----------- EXP1-4 * EXP2-8 ----------- EXP1-3 * EXP2-1 ----------- EXP1-2 - * EXP1-10 ----------- EXP1-1 + * EXP1-10 ---------- EXP1-1 * * NOTE: The MISO pin should not get a 5V signal. * To fix, insert a 1N4148 diode in the MISO line. */ - #define BEEPER_PIN 37 + #define BEEPER_PIN EXP1_10_PIN - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN EXP2_04_PIN - #define CLCD_MOD_RESET 31 - #define CLCD_SPI_CS 33 + #define CLCD_MOD_RESET EXP2_08_PIN + #define CLCD_SPI_CS EXP2_06_PIN #endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h index 549b578f4..28cfa74aa 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h @@ -268,23 +268,23 @@ * EXP2 EXP1 */ -#define EXPA1_03_PIN PG7 -#define EXPA1_04_PIN PG6 -#define EXPA1_05_PIN PG3 -#define EXPA1_06_PIN PG2 -#define EXPA1_07_PIN PD10 -#define EXPA1_08_PIN PD11 -#define EXPA1_09_PIN PA8 -#define EXPA1_10_PIN PG4 +#define EXP1_03_PIN PG7 +#define EXP1_04_PIN PG6 +#define EXP1_05_PIN PG3 +#define EXP1_06_PIN PG2 +#define EXP1_07_PIN PD10 +#define EXP1_08_PIN PD11 +#define EXP1_09_PIN PA8 +#define EXP1_10_PIN PG4 -#define EXPA2_03_PIN -1 -#define EXPA2_04_PIN PF12 -#define EXPA2_05_PIN PB15 -#define EXPA2_06_PIN PF11 -#define EXPA2_07_PIN PB12 -#define EXPA2_08_PIN PG10 -#define EXPA2_09_PIN PB13 -#define EXPA2_10_PIN PB14 +#define EXP2_03_PIN -1 +#define EXP2_04_PIN PF12 +#define EXP2_05_PIN PB15 +#define EXP2_06_PIN PF11 +#define EXP2_07_PIN PB12 +#define EXP2_08_PIN PG10 +#define EXP2_09_PIN PB13 +#define EXP2_10_PIN PB14 // // Onboard SD card @@ -292,8 +292,8 @@ // #if SD_CONNECTION_IS(LCD) - #define SD_DETECT_PIN EXPA2_04_PIN - #define SDSS EXPA2_07_PIN + #define SD_DETECT_PIN EXP2_04_PIN + #define SDSS EXP2_07_PIN #elif SD_CONNECTION_IS(ONBOARD) @@ -325,36 +325,36 @@ */ // M1 on Driver Expansion Module - #define E3_STEP_PIN EXPA2_05_PIN - #define E3_DIR_PIN EXPA2_06_PIN - #define E3_ENABLE_PIN EXPA2_04_PIN - #define E3_DIAG_PIN EXPA1_06_PIN - #define E3_CS_PIN EXPA1_05_PIN + #define E3_STEP_PIN EXP2_05_PIN + #define E3_DIR_PIN EXP2_06_PIN + #define E3_ENABLE_PIN EXP2_04_PIN + #define E3_DIAG_PIN EXP1_06_PIN + #define E3_CS_PIN EXP1_05_PIN #if HAS_TMC_UART - #define E3_SERIAL_TX_PIN EXPA1_05_PIN - #define E3_SERIAL_RX_PIN EXPA1_05_PIN + #define E3_SERIAL_TX_PIN EXP1_05_PIN + #define E3_SERIAL_RX_PIN EXP1_05_PIN #endif // M2 on Driver Expansion Module - #define E4_STEP_PIN EXPA2_08_PIN - #define E4_DIR_PIN EXPA2_07_PIN - #define E4_ENABLE_PIN EXPA1_03_PIN - #define E4_DIAG_PIN EXPA1_08_PIN - #define E4_CS_PIN EXPA1_07_PIN + #define E4_STEP_PIN EXP2_08_PIN + #define E4_DIR_PIN EXP2_07_PIN + #define E4_ENABLE_PIN EXP1_03_PIN + #define E4_DIAG_PIN EXP1_08_PIN + #define E4_CS_PIN EXP1_07_PIN #if HAS_TMC_UART - #define E4_SERIAL_TX_PIN EXPA1_07_PIN - #define E4_SERIAL_RX_PIN EXPA1_07_PIN + #define E4_SERIAL_TX_PIN EXP1_07_PIN + #define E4_SERIAL_RX_PIN EXP1_07_PIN #endif // M3 on Driver Expansion Module - #define E5_STEP_PIN EXPA2_10_PIN - #define E5_DIR_PIN EXPA2_09_PIN - #define E5_ENABLE_PIN EXPA1_04_PIN - #define E5_DIAG_PIN EXPA1_10_PIN - #define E5_CS_PIN EXPA1_09_PIN + #define E5_STEP_PIN EXP2_10_PIN + #define E5_DIR_PIN EXP2_09_PIN + #define E5_ENABLE_PIN EXP1_04_PIN + #define E5_DIAG_PIN EXP1_10_PIN + #define E5_CS_PIN EXP1_09_PIN #if HAS_TMC_UART - #define E5_SERIAL_TX_PIN EXPA1_09_PIN - #define E5_SERIAL_RX_PIN EXPA1_09_PIN + #define E5_SERIAL_TX_PIN EXP1_09_PIN + #define E5_SERIAL_RX_PIN EXP1_09_PIN #endif #endif // BTT_MOTOR_EXPANSION @@ -365,23 +365,23 @@ #if IS_TFTGLCD_PANEL #if ENABLED(TFTGLCD_PANEL_SPI) - #define TFTGLCD_CS EXPA2_08_PIN + #define TFTGLCD_CS EXP2_08_PIN #endif #elif HAS_WIRED_LCD - #define BEEPER_PIN EXPA1_10_PIN - #define BTN_ENC EXPA1_09_PIN + #define BEEPER_PIN EXP1_10_PIN + #define BTN_ENC EXP1_09_PIN #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS EXPA1_04_PIN + #define LCD_PINS_RS EXP1_04_PIN - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN + #define BTN_EN1 EXP1_08_PIN + #define BTN_EN2 EXP1_06_PIN - #define LCD_PINS_ENABLE EXPA1_03_PIN - #define LCD_PINS_D4 EXPA1_05_PIN + #define LCD_PINS_ENABLE EXP1_03_PIN + #define LCD_PINS_D4 EXP1_05_PIN // CR10_STOCKDISPLAY default timing is too fast #undef BOARD_ST7920_DELAY_1 @@ -390,45 +390,45 @@ #elif ENABLED(MKS_MINI_12864) - #define DOGLCD_A0 EXPA1_04_PIN - #define DOGLCD_CS EXPA1_05_PIN - #define BTN_EN1 EXPA2_08_PIN - #define BTN_EN2 EXPA2_06_PIN + #define DOGLCD_A0 EXP1_04_PIN + #define DOGLCD_CS EXP1_05_PIN + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN #else - #define LCD_PINS_RS EXPA1_07_PIN + #define LCD_PINS_RS EXP1_07_PIN - #define BTN_EN1 EXPA2_08_PIN - #define BTN_EN2 EXPA2_06_PIN + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN - #define LCD_PINS_ENABLE EXPA1_08_PIN - #define LCD_PINS_D4 EXPA1_06_PIN + #define LCD_PINS_ENABLE EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS EXPA1_08_PIN - #define DOGLCD_A0 EXPA1_07_PIN + #define DOGLCD_CS EXP1_08_PIN + #define DOGLCD_A0 EXP1_07_PIN //#define LCD_BACKLIGHT_PIN -1 - #define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN EXPA1_05_PIN + #define RGB_LED_R_PIN EXP1_05_PIN #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN EXPA1_04_PIN + #define RGB_LED_G_PIN EXP1_04_PIN #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN EXPA1_03_PIN + #define RGB_LED_B_PIN EXP1_03_PIN #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN EXPA1_05_PIN + #define NEOPIXEL_PIN EXP1_05_PIN #endif #endif // !FYSETC_MINI_12864 #if IS_ULTIPANEL - #define LCD_PINS_D5 EXPA1_05_PIN - #define LCD_PINS_D6 EXPA1_04_PIN - #define LCD_PINS_D7 EXPA1_03_PIN + #define LCD_PINS_D5 EXP1_05_PIN + #define LCD_PINS_D6 EXP1_04_PIN + #define LCD_PINS_D7 EXP1_03_PIN #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h b/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h index 18e689d1d..ad4376513 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h @@ -161,38 +161,38 @@ * EXP3 */ -#define EXPA1_03_PIN PB7 -#define EXPA1_04_PIN PB6 -#define EXPA1_05_PIN PB14 -#define EXPA1_06_PIN PB13 -#define EXPA1_07_PIN PB12 -#define EXPA1_08_PIN PB15 -#define EXPA1_09_PIN PC12 -#define EXPA1_10_PIN PC9 +#define EXP1_03_PIN PB7 +#define EXP1_04_PIN PB6 +#define EXP1_05_PIN PB14 +#define EXP1_06_PIN PB13 +#define EXP1_07_PIN PB12 +#define EXP1_08_PIN PB15 +#define EXP1_09_PIN PC12 +#define EXP1_10_PIN PC9 -#define EXPA2_03_PIN -1 -#define EXPA2_04_PIN PC3 -#define EXPA2_05_PIN PA7 -#define EXPA2_06_PIN PC11 -#define EXPA2_07_PIN PA4 -#define EXPA2_08_PIN PC10 -#define EXPA2_09_PIN PA5 -#define EXPA2_10_PIN PA6 +#define EXP2_03_PIN -1 +#define EXP2_04_PIN PC3 +#define EXP2_05_PIN PA7 +#define EXP2_06_PIN PC11 +#define EXP2_07_PIN PA4 +#define EXP2_08_PIN PC10 +#define EXP2_09_PIN PA5 +#define EXP2_10_PIN PA6 #if HAS_WIRED_LCD - #define BEEPER_PIN EXPA1_10_PIN - #define BTN_ENC EXPA1_09_PIN + #define BEEPER_PIN EXP1_10_PIN + #define BTN_ENC EXP1_09_PIN #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS EXPA1_07_PIN + #define LCD_PINS_RS EXP1_07_PIN - #define BTN_EN1 EXPA2_08_PIN - #define BTN_EN2 EXPA2_06_PIN + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN - #define LCD_PINS_ENABLE EXPA1_08_PIN - #define LCD_PINS_D4 EXPA1_06_PIN + #define LCD_PINS_ENABLE EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN // CR10_STOCKDISPLAY default timing is too fast #undef BOARD_ST7920_DELAY_1 @@ -201,45 +201,45 @@ #elif ENABLED(MKS_MINI_12864) - #define DOGLCD_A0 EXPA1_04_PIN - #define DOGLCD_CS EXPA1_05_PIN - #define BTN_EN1 EXPA2_08_PIN - #define BTN_EN2 EXPA2_06_PIN + #define DOGLCD_A0 EXP1_04_PIN + #define DOGLCD_CS EXP1_05_PIN + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN #else - #define LCD_PINS_RS EXPA1_07_PIN + #define LCD_PINS_RS EXP1_07_PIN - #define BTN_EN1 EXPA2_06_PIN - #define BTN_EN2 EXPA2_08_PIN + #define BTN_EN1 EXP2_06_PIN + #define BTN_EN2 EXP2_08_PIN - #define LCD_PINS_ENABLE EXPA1_08_PIN - #define LCD_PINS_D4 EXPA1_06_PIN + #define LCD_PINS_ENABLE EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS EXPA1_08_PIN - #define DOGLCD_A0 EXPA1_07_PIN + #define DOGLCD_CS EXP1_08_PIN + #define DOGLCD_A0 EXP1_07_PIN //#define LCD_BACKLIGHT_PIN -1 - #define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN EXPA1_05_PIN + #define RGB_LED_R_PIN EXP1_05_PIN #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN EXPA1_04_PIN + #define RGB_LED_G_PIN EXP1_04_PIN #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN EXPA1_03_PIN + #define RGB_LED_B_PIN EXP1_03_PIN #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN EXPA1_05_PIN + #define NEOPIXEL_PIN EXP1_05_PIN #endif #endif // !FYSETC_MINI_12864 #if IS_ULTIPANEL - #define LCD_PINS_D5 EXPA1_05_PIN - #define LCD_PINS_D6 EXPA1_04_PIN - #define LCD_PINS_D7 EXPA1_03_PIN + #define LCD_PINS_D5 EXP1_05_PIN + #define LCD_PINS_D6 EXP1_04_PIN + #define LCD_PINS_D7 EXP1_03_PIN #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder @@ -265,7 +265,7 @@ #endif #if ENABLED(TOUCH_UI_FTDI_EVE) - #define BEEPER_PIN EXPA1_10_PIN - #define CLCD_MOD_RESET EXPA2_08_PIN - #define CLCD_SPI_CS EXPA2_06_PIN + #define BEEPER_PIN EXP1_10_PIN + #define CLCD_MOD_RESET EXP2_08_PIN + #define CLCD_SPI_CS EXP2_06_PIN #endif