diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index e2c3c888f..3f692c121 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -311,6 +311,7 @@ #define BOARD_CHITU3D_V5 4030 // Chitu3D TronXY X5SA V5 Board #define BOARD_CHITU3D_V6 4031 // Chitu3D TronXY X5SA V5 Board #define BOARD_CREALITY_V4 4032 // Creality v4.x (STM32F103RE) +#define BOARD_TRIGORILLA_PRO 4033 // Trigorilla Pro (STM32F103ZET6) // // ARM Cortex-M4F diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index f81f8f42f..3e1e04404 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -546,6 +546,8 @@ #include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103 env:chitu_f103_lvgl #elif MB(CREALITY_V4) #include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality +#elif MB(TRIGORILLA_PRO) + #include "stm32f1/pins_TRIGORILLA_PRO.h" // STM32F1 env:trigorilla_pro // // ARM Cortex-M4F diff --git a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h new file mode 100644 index 000000000..0aec1f88c --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h @@ -0,0 +1,157 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * ANYCUBIC Trigorilla Pro (STM32F130ZET6) board pin assignments. + * It is the same used by the Tronxy X5SA thanks to ftoz1 for sharing it + * https://github.com/MarlinFirmware/Marlin/issues/14655 + * https://github.com/MarlinFirmware/Marlin/files/3401484/x5sa-main_board-2.pdf + */ + +#ifndef __STM32F1__ + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "Trigorilla Pro supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Trigorilla Pro" +#define DISABLE_JTAG + +// +// EEPROM +// +#define FLASH_EEPROM_EMULATION +#if ENABLED(FLASH_EEPROM_EMULATION) + // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) + #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE +#else + #define MARLIN_EEPROM_SIZE (0x800U) // On SD, Limit to 2KB, require this amount of RAM +#endif + +// +// Limit Switches +// +#define X_MAX_PIN PG10 +#define Y_MAX_PIN PA12 +#define Z_MAX_PIN PA14 +#define Z_MIN_PIN PA13 + +// +// Steppers +// +#define X_ENABLE_PIN PC13 +#define X_STEP_PIN PE5 +#define X_DIR_PIN PE6 + +#define Y_ENABLE_PIN PE4 +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 + +#define Z_ENABLE_PIN PE1 +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PE0 + +#define E0_ENABLE_PIN PB8 +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB5 + +#define E1_ENABLE_PIN PG8 +#define E1_STEP_PIN PC7 +#define E1_DIR_PIN PC6 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA1 // TH1 +#define TEMP_BED_PIN PA0 // TB1 + +// +// Heaters +// +#define HEATER_0_PIN PG12 // HEATER1 +#define HEATER_BED_PIN PG11 // HOT BED +#define HEATER_BED_INVERTING true + +// +// Fans +// +#define CONTROLLER_FAN_PIN PD6 // FAN +#define FAN_PIN PG13 // FAN +#define FAN1_PIN PG14 // FAN + +// +// Misc +// +#define BEEPER_PIN PB0 +#define LED_PIN PD3 +//#define POWER_LOSS_PIN PG2 // PG4 PW_DET +#define FIL_RUNOUT_PIN PA15 // MT_DET + +/** + * Note: MKS Robin TFT screens use various TFT controllers + * Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240) + * ILI9488 is not supported. + * Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp + * + * If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader init the screen. + * + * Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu + * because Marlin uses the reset as a failsafe to revive a glitchy LCD. + */ +#define LCD_RESET_PIN PF11 +#define LCD_BACKLIGHT_PIN PD13 +#define FSMC_CS_PIN PD7 // NE4 +#define FSMC_RS_PIN PD11 // A0 + +#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT +#define FSMC_DMA_DEV DMA2 +#define FSMC_DMA_CHANNEL DMA_CH5 + +#if ENABLED(TOUCH_BUTTONS) + #define TOUCH_CS_PIN PB7 // SPI2_NSS + #define TOUCH_SCK_PIN PA5 // SPI2_SCK + #define TOUCH_MISO_PIN PA6 // SPI2_MISO + #define TOUCH_MOSI_PIN PA7 // SPI2_MOSI +#endif + +// SPI1(PA7) & SPI3(PB5) not available +#define ENABLE_SPI2 + +#if ENABLED(SDIO_SUPPORT) + #define SCK_PIN PB13 // SPI2 ok + #define MISO_PIN PB14 // SPI2 ok + #define MOSI_PIN PB15 // SPI2 ok + #define SS_PIN PC11 // PB12 is X- ok + #define SD_DETECT_PIN -1 // SD_CD ok +#else + // SD as custom software SPI (SDIO pins) + #define SCK_PIN PC12 + #define MISO_PIN PC8 + #define MOSI_PIN PD2 + #define SS_PIN -1 + #define ONBOARD_SD_CS_PIN PC11 + #define SDSS PD2 + #define SD_DETECT_PIN -1 +#endif diff --git a/platformio.ini b/platformio.ini index 7cc3adaa9..762a66f92 100644 --- a/platformio.ini +++ b/platformio.ini @@ -586,6 +586,14 @@ platform = ${common_stm32f1.platform} extends = env:mks_robin extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_pro.py + +# +# TRIGORILLA PRO (STM32F103ZET6) +# +[env:trigorilla_pro] +platform = ${common_stm32f1.platform} +extends = env:mks_robin + # # MKS Robin E3D (STM32F103RCT6) and # MKS Robin E3 with TMC2209