From b35bfeb1c3f1271016227a1d79dcb552e67e3cb9 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 7 Feb 2021 16:58:06 -0600 Subject: [PATCH] Fix TEMP_0_TR_ENABLE, rename temp conditions (#21016) --- Marlin/Configuration_adv.h | 8 +- Marlin/src/MarlinCore.cpp | 4 +- Marlin/src/inc/Conditionals_post.h | 180 +++++---- Marlin/src/inc/SanityCheck.h | 52 +-- Marlin/src/module/temperature.cpp | 361 ++++++++--------- Marlin/src/module/temperature.h | 33 +- Marlin/src/module/thermistor/thermistors.h | 376 +++++++++--------- .../pins/stm32f4/pins_BTT_SKR_PRO_common.h | 2 +- platformio.ini | 2 +- 9 files changed, 525 insertions(+), 493 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index a3699128b..f615a5467 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -113,6 +113,12 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_PROBE == 1000 + #define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define PROBE_BETA 3950 // Beta value +#endif + // // Hephestos 2 24V heated bed upgrade kit. // https://store.bq.com/en/heated-bed-kit-hephestos2 @@ -331,7 +337,7 @@ * High Temperature Thermistor Support * * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * good readings at room and lower temperatures. This means TEMP_SENSOR_X_RAW_LO_TEMP * will probably be caught when the heating element first turns on during the * preheating process, which will trigger a min_temp_error as a safety measure * and force stop everything. diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp index 626f934dd..df383d8a9 100644 --- a/Marlin/src/MarlinCore.cpp +++ b/Marlin/src/MarlinCore.cpp @@ -938,10 +938,10 @@ void setup() { SETUP_RUN(HAL_init()); // Init and disable SPI thermocouples - #if HEATER_0_USES_MAX6675 + #if TEMP_SENSOR_0_IS_MAX6675 OUT_WRITE(MAX6675_SS_PIN, HIGH); // Disable #endif - #if HEATER_1_USES_MAX6675 + #if TEMP_SENSOR_1_IS_MAX6675 OUT_WRITE(MAX6675_SS2_PIN, HIGH); // Disable #endif diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index acf8f3620..04c4eb120 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -404,30 +404,33 @@ #endif #if TEMP_SENSOR_0 == -5 || TEMP_SENSOR_0 == -3 || TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 1 + #define TEMP_SENSOR_0_IS_MAX_TC 1 + #define HAS_MAX_TC 1 #if TEMP_SENSOR_0 == -3 - #define HEATER_0_MAX6675_TMIN -270 - #define HEATER_0_MAX6675_TMAX 1800 + #define TEMP_SENSOR_0_MAX_TC_TMIN -270 + #define TEMP_SENSOR_0_MAX_TC_TMAX 1800 #else - #define HEATER_0_MAX6675_TMIN 0 - #define HEATER_0_MAX6675_TMAX 1024 + #define TEMP_SENSOR_0_MAX_TC_TMIN 0 + #define TEMP_SENSOR_0_MAX_TC_TMAX 1024 #endif #if TEMP_SENSOR_0 == -5 - #define MAX6675_0_IS_MAX31865 1 + #define TEMP_SENSOR_0_IS_MAX31865 1 #elif TEMP_SENSOR_0 == -3 - #define MAX6675_0_IS_MAX31855 1 + #define TEMP_SENSOR_0_IS_MAX31855 1 + #elif TEMP_SENSOR_0 == -2 + #define TEMP_SENSOR_0_IS_MAX6675 1 #endif #elif TEMP_SENSOR_0 == -4 - #define HEATER_0_USES_AD8495 1 + #define TEMP_SENSOR_0_IS_AD8495 1 #elif TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 1 + #define TEMP_SENSOR_0_IS_AD595 1 #elif TEMP_SENSOR_0 > 0 - #define THERMISTOR_HEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR 1 + #define TEMP_SENSOR_0_THERMISTOR_ID TEMP_SENSOR_0 + #define TEMP_SENSOR_0_IS_THERMISTOR 1 #if TEMP_SENSOR_0 == 1000 - #define HEATER_0_USER_THERMISTOR 1 + #define TEMP_SENSOR_0_IS_CUSTOM 1 #elif TEMP_SENSOR_0 == 998 || TEMP_SENSOR_0 == 999 - #define HEATER_0_DUMMY_THERMISTOR 1 + #define TEMP_SENSOR_0_IS_DUMMY 1 #endif #else #undef HEATER_0_MINTEMP @@ -435,18 +438,21 @@ #endif #if TEMP_SENSOR_1 == -5 || TEMP_SENSOR_1 == -3 || TEMP_SENSOR_1 == -2 - #define HEATER_1_USES_MAX6675 1 + #define TEMP_SENSOR_1_IS_MAX_TC 1 + #define HAS_MAX_TC 1 #if TEMP_SENSOR_1 == -3 - #define HEATER_1_MAX6675_TMIN -270 - #define HEATER_1_MAX6675_TMAX 1800 + #define TEMP_SENSOR_1_MAX_TC_TMIN -270 + #define TEMP_SENSOR_1_MAX_TC_TMAX 1800 #else - #define HEATER_1_MAX6675_TMIN 0 - #define HEATER_1_MAX6675_TMAX 1024 + #define TEMP_SENSOR_1_MAX_TC_TMIN 0 + #define TEMP_SENSOR_1_MAX_TC_TMAX 1024 #endif #if TEMP_SENSOR_1 == -5 - #define MAX6675_1_IS_MAX31865 1 + #define TEMP_SENSOR_1_IS_MAX31865 1 #elif TEMP_SENSOR_1 == -3 - #define MAX6675_1_IS_MAX31855 1 + #define TEMP_SENSOR_1_IS_MAX31855 1 + #elif TEMP_SENSOR_1 == -2 + #define TEMP_SENSOR_1_IS_MAX6675 1 #endif #if TEMP_SENSOR_1 != TEMP_SENSOR_0 #if TEMP_SENSOR_1 == -5 @@ -458,37 +464,47 @@ #endif #endif #elif TEMP_SENSOR_1 == -4 - #define HEATER_1_USES_AD8495 1 + #define TEMP_SENSOR_1_IS_AD8495 1 #elif TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 1 + #define TEMP_SENSOR_1_IS_AD595 1 #elif TEMP_SENSOR_1 > 0 - #define THERMISTOR_HEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR 1 + #define TEMP_SENSOR_1_THERMISTOR_ID TEMP_SENSOR_1 + #define TEMP_SENSOR_1_IS_THERMISTOR 1 #if TEMP_SENSOR_1 == 1000 - #define HEATER_1_USER_THERMISTOR 1 + #define TEMP_SENSOR_1_IS_CUSTOM 1 #elif TEMP_SENSOR_1 == 998 || TEMP_SENSOR_1 == 999 - #define HEATER_1_DUMMY_THERMISTOR 1 + #define TEMP_SENSOR_1_IS_DUMMY 1 #endif #else #undef HEATER_1_MINTEMP #undef HEATER_1_MAXTEMP #endif +#if TEMP_SENSOR_0_IS_MAX31855 || TEMP_SENSOR_1_IS_MAX31855 + #define HAS_MAX31855 1 +#endif +#if TEMP_SENSOR_0_IS_MAX31865 || TEMP_SENSOR_1_IS_MAX31865 + #define HAS_MAX31865 1 +#endif +#if TEMP_SENSOR_0_IS_MAX6675 || TEMP_SENSOR_1_IS_MAX6675 + #define HAS_MAX6675 1 +#endif + #if TEMP_SENSOR_2 == -4 - #define HEATER_2_USES_AD8495 1 + #define TEMP_SENSOR_2_IS_AD8495 1 #elif TEMP_SENSOR_2 == -3 #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_2." #elif TEMP_SENSOR_2 == -2 #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_2." #elif TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 1 + #define TEMP_SENSOR_2_IS_AD595 1 #elif TEMP_SENSOR_2 > 0 - #define THERMISTOR_HEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR 1 + #define TEMP_SENSOR_2_THERMISTOR_ID TEMP_SENSOR_2 + #define TEMP_SENSOR_2_IS_THERMISTOR 1 #if TEMP_SENSOR_2 == 1000 - #define HEATER_2_USER_THERMISTOR 1 + #define TEMP_SENSOR_2_IS_CUSTOM 1 #elif TEMP_SENSOR_2 == 998 || TEMP_SENSOR_2 == 999 - #define HEATER_2_DUMMY_THERMISTOR 1 + #define TEMP_SENSOR_2_IS_DUMMY 1 #endif #else #undef HEATER_2_MINTEMP @@ -496,20 +512,20 @@ #endif #if TEMP_SENSOR_3 == -4 - #define HEATER_3_USES_AD8495 1 + #define TEMP_SENSOR_3_IS_AD8495 1 #elif TEMP_SENSOR_3 == -3 #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_3." #elif TEMP_SENSOR_3 == -2 #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_3." #elif TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 1 + #define TEMP_SENSOR_3_IS_AD595 1 #elif TEMP_SENSOR_3 > 0 - #define THERMISTOR_HEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR 1 + #define TEMP_SENSOR_3_THERMISTOR_ID TEMP_SENSOR_3 + #define TEMP_SENSOR_3_IS_THERMISTOR 1 #if TEMP_SENSOR_3 == 1000 - #define HEATER_3_USER_THERMISTOR 1 + #define TEMP_SENSOR_3_IS_CUSTOM 1 #elif TEMP_SENSOR_3 == 998 || TEMP_SENSOR_3 == 999 - #define HEATER_3_DUMMY_THERMISTOR 1 + #define TEMP_SENSOR_3_IS_DUMMY 1 #endif #else #undef HEATER_3_MINTEMP @@ -517,20 +533,20 @@ #endif #if TEMP_SENSOR_4 == -4 - #define HEATER_4_USES_AD8495 1 + #define TEMP_SENSOR_4_IS_AD8495 1 #elif TEMP_SENSOR_4 == -3 #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_4." #elif TEMP_SENSOR_4 == -2 #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_4." #elif TEMP_SENSOR_4 == -1 - #define HEATER_4_USES_AD595 1 + #define TEMP_SENSOR_4_IS_AD595 1 #elif TEMP_SENSOR_4 > 0 - #define THERMISTOR_HEATER_4 TEMP_SENSOR_4 - #define HEATER_4_USES_THERMISTOR 1 + #define TEMP_SENSOR_4_THERMISTOR_ID TEMP_SENSOR_4 + #define TEMP_SENSOR_4_IS_THERMISTOR 1 #if TEMP_SENSOR_4 == 1000 - #define HEATER_4_USER_THERMISTOR 1 + #define TEMP_SENSOR_4_IS_CUSTOM 1 #elif TEMP_SENSOR_4 == 998 || TEMP_SENSOR_4 == 999 - #define HEATER_4_DUMMY_THERMISTOR 1 + #define TEMP_SENSOR_4_IS_DUMMY 1 #endif #else #undef HEATER_4_MINTEMP @@ -538,20 +554,20 @@ #endif #if TEMP_SENSOR_5 == -4 - #define HEATER_5_USES_AD8495 1 + #define TEMP_SENSOR_5_IS_AD8495 1 #elif TEMP_SENSOR_5 == -3 #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_5." #elif TEMP_SENSOR_5 == -2 #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_5." #elif TEMP_SENSOR_5 == -1 - #define HEATER_5_USES_AD595 1 + #define TEMP_SENSOR_5_IS_AD595 1 #elif TEMP_SENSOR_5 > 0 - #define THERMISTOR_HEATER_5 TEMP_SENSOR_5 - #define HEATER_5_USES_THERMISTOR 1 + #define TEMP_SENSOR_5_THERMISTOR_ID TEMP_SENSOR_5 + #define TEMP_SENSOR_5_IS_THERMISTOR 1 #if TEMP_SENSOR_5 == 1000 - #define HEATER_5_USER_THERMISTOR 1 + #define TEMP_SENSOR_5_IS_CUSTOM 1 #elif TEMP_SENSOR_5 == 998 || TEMP_SENSOR_5 == 999 - #define HEATER_5_DUMMY_THERMISTOR 1 + #define TEMP_SENSOR_5_IS_DUMMY 1 #endif #else #undef HEATER_5_MINTEMP @@ -559,20 +575,20 @@ #endif #if TEMP_SENSOR_6 == -4 - #define HEATER_6_USES_AD8495 1 + #define TEMP_SENSOR_6_IS_AD8495 1 #elif TEMP_SENSOR_6 == -3 #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_6." #elif TEMP_SENSOR_6 == -2 #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_6." #elif TEMP_SENSOR_6 == -1 - #define HEATER_6_USES_AD595 1 + #define TEMP_SENSOR_6_IS_AD595 1 #elif TEMP_SENSOR_6 > 0 - #define THERMISTOR_HEATER_6 TEMP_SENSOR_6 - #define HEATER_6_USES_THERMISTOR 1 + #define TEMP_SENSOR_6_THERMISTOR_ID TEMP_SENSOR_6 + #define TEMP_SENSOR_6_IS_THERMISTOR 1 #if TEMP_SENSOR_6 == 1000 - #define HEATER_6_USER_THERMISTOR 1 + #define TEMP_SENSOR_6_IS_CUSTOM 1 #elif TEMP_SENSOR_6 == 998 || TEMP_SENSOR_6 == 999 - #define HEATER_6_DUMMY_THERMISTOR 1 + #define TEMP_SENSOR_6_IS_DUMMY 1 #endif #else #undef HEATER_6_MINTEMP @@ -580,20 +596,20 @@ #endif #if TEMP_SENSOR_7 == -4 - #define HEATER_7_USES_AD8495 1 + #define TEMP_SENSOR_7_IS_AD8495 1 #elif TEMP_SENSOR_7 == -3 #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_7." #elif TEMP_SENSOR_7 == -2 #error "MAX7775 Thermocouples (-2) not supported for TEMP_SENSOR_7." #elif TEMP_SENSOR_7 == -1 - #define HEATER_7_USES_AD595 1 + #define TEMP_SENSOR_7_IS_AD595 1 #elif TEMP_SENSOR_7 > 0 - #define THERMISTOR_HEATER_7 TEMP_SENSOR_7 - #define HEATER_7_USES_THERMISTOR 1 + #define TEMP_SENSOR_7_THERMISTOR_ID TEMP_SENSOR_7 + #define TEMP_SENSOR_7_IS_THERMISTOR 1 #if TEMP_SENSOR_7 == 1000 - #define HEATER_7_USER_THERMISTOR 1 + #define TEMP_SENSOR_7_IS_CUSTOM 1 #elif TEMP_SENSOR_7 == 998 || TEMP_SENSOR_7 == 999 - #define HEATER_7_DUMMY_THERMISTOR 1 + #define TEMP_SENSOR_7_IS_DUMMY 1 #endif #else #undef HEATER_7_MINTEMP @@ -601,20 +617,20 @@ #endif #if TEMP_SENSOR_BED == -4 - #define HEATER_BED_USES_AD8495 1 + #define TEMP_SENSOR_BED_IS_AD8495 1 #elif TEMP_SENSOR_BED == -3 #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_BED." #elif TEMP_SENSOR_BED == -2 #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BED." #elif TEMP_SENSOR_BED == -1 - #define HEATER_BED_USES_AD595 1 + #define TEMP_SENSOR_BED_IS_AD595 1 #elif TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define HEATER_BED_USES_THERMISTOR 1 + #define TEMP_SENSOR_BED_THERMISTOR_ID TEMP_SENSOR_BED + #define TEMP_SENSOR_BED_IS_THERMISTOR 1 #if TEMP_SENSOR_BED == 1000 - #define HEATER_BED_USER_THERMISTOR 1 + #define TEMP_SENSOR_BED_IS_CUSTOM 1 #elif TEMP_SENSOR_BED == 998 || TEMP_SENSOR_BED == 999 - #define HEATER_BED_DUMMY_THERMISTOR 1 + #define TEMP_SENSOR_BED_IS_DUMMY 1 #endif #else #undef BED_MINTEMP @@ -622,20 +638,20 @@ #endif #if TEMP_SENSOR_CHAMBER == -4 - #define HEATER_CHAMBER_USES_AD8495 1 + #define TEMP_SENSOR_CHAMBER_IS_AD8495 1 #elif TEMP_SENSOR_CHAMBER == -3 #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_CHAMBER." #elif TEMP_SENSOR_CHAMBER == -2 #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_CHAMBER." #elif TEMP_SENSOR_CHAMBER == -1 - #define HEATER_CHAMBER_USES_AD595 1 + #define TEMP_SENSOR_CHAMBER_IS_AD595 1 #elif TEMP_SENSOR_CHAMBER > 0 - #define THERMISTORCHAMBER TEMP_SENSOR_CHAMBER - #define HEATER_CHAMBER_USES_THERMISTOR 1 + #define TEMP_SENSOR_CHAMBER_THERMISTOR_ID TEMP_SENSOR_CHAMBER + #define TEMP_SENSOR_CHAMBER_IS_THERMISTOR 1 #if TEMP_SENSOR_CHAMBER == 1000 - #define HEATER_CHAMBER_USER_THERMISTOR 1 + #define TEMP_SENSOR_CHAMBER_IS_CUSTOM 1 #elif TEMP_SENSOR_CHAMBER == 998 || TEMP_SENSOR_CHAMBER == 999 - #define HEATER_CHAMBER_DUMMY_THERMISTOR 1 + #define TEMP_SENSOR_CHAMBER_IS_DUMMY 1 #endif #else #undef CHAMBER_MINTEMP @@ -643,20 +659,20 @@ #endif #if TEMP_SENSOR_PROBE == -4 - #define HEATER_PROBE_USES_AD8495 1 + #define TEMP_SENSOR_PROBE_IS_AD8495 1 #elif TEMP_SENSOR_PROBE == -3 #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_PROBE." #elif TEMP_SENSOR_PROBE == -2 #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_PROBE." #elif TEMP_SENSOR_PROBE == -1 - #define HEATER_PROBE_USES_AD595 1 + #define TEMP_SENSOR_PROBE_IS_AD595 1 #elif TEMP_SENSOR_PROBE > 0 - #define THERMISTORPROBE TEMP_SENSOR_PROBE - #define HEATER_PROBE_USES_THERMISTOR 1 + #define TEMP_SENSOR_PROBE_THERMISTOR_ID TEMP_SENSOR_PROBE + #define TEMP_SENSOR_PROBE_IS_THERMISTOR 1 #if TEMP_SENSOR_PROBE == 1000 - #define HEATER_PROBE_USER_THERMISTOR 1 + #define TEMP_SENSOR_PROBE_IS_CUSTOM 1 #elif TEMP_SENSOR_PROBE == 998 || TEMP_SENSOR_PROBE == 999 - #define HEATER_PROBE_DUMMY_THERMISTOR 1 + #define TEMP_SENSOR_PROBE_IS_DUMMY 1 #endif #endif @@ -1792,7 +1808,7 @@ // // ADC Temp Sensors (Thermistor or Thermocouple with amplifier ADC interface) // -#define HAS_ADC_TEST(P) (PIN_EXISTS(TEMP_##P) && TEMP_SENSOR_##P != 0 && NONE(HEATER_##P##_USES_MAX6675, HEATER_##P##_DUMMY_THERMISTOR)) +#define HAS_ADC_TEST(P) (PIN_EXISTS(TEMP_##P) && TEMP_SENSOR_##P != 0 && NONE(TEMP_SENSOR_##P##_IS_MAX_TC, TEMP_SENSOR_##P##_IS_DUMMY)) #if HAS_ADC_TEST(0) #define HAS_TEMP_ADC_0 1 #endif @@ -1827,7 +1843,7 @@ #define HAS_TEMP_ADC_CHAMBER 1 #endif -#define HAS_TEMP(N) ANY(HAS_TEMP_ADC_##N, HEATER_##N##_USES_MAX6675, HEATER_##N##_DUMMY_THERMISTOR) +#define HAS_TEMP(N) ANY(HAS_TEMP_ADC_##N, TEMP_SENSOR_##N##_IS_MAX_TC, TEMP_SENSOR_##N##_IS_DUMMY) #if HAS_HOTEND && HAS_TEMP(0) #define HAS_TEMP_HOTEND 1 #endif diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 964f894e9..2ff5293de 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -1698,46 +1698,48 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal /** * Required custom thermistor settings */ -#if HEATER_0_USER_THERMISTOR && !(defined(HOTEND0_PULLUP_RESISTOR_OHMS) && defined(HOTEND0_RESISTANCE_25C_OHMS) && defined(HOTEND0_BETA)) +#if TEMP_SENSOR_0_IS_CUSTOM && !(defined(HOTEND0_PULLUP_RESISTOR_OHMS) && defined(HOTEND0_RESISTANCE_25C_OHMS) && defined(HOTEND0_BETA)) #error "TEMP_SENSOR_0 1000 requires HOTEND0_PULLUP_RESISTOR_OHMS, HOTEND0_RESISTANCE_25C_OHMS and HOTEND0_BETA in Configuration_adv.h." -#elif HEATER_1_USER_THERMISTOR && !(defined(HOTEND1_PULLUP_RESISTOR_OHMS) && defined(HOTEND1_RESISTANCE_25C_OHMS) && defined(HOTEND1_BETA)) +#elif TEMP_SENSOR_1_IS_CUSTOM && !(defined(HOTEND1_PULLUP_RESISTOR_OHMS) && defined(HOTEND1_RESISTANCE_25C_OHMS) && defined(HOTEND1_BETA)) #error "TEMP_SENSOR_1 1000 requires HOTEND1_PULLUP_RESISTOR_OHMS, HOTEND1_RESISTANCE_25C_OHMS and HOTEND1_BETA in Configuration_adv.h." -#elif HEATER_2_USER_THERMISTOR && !(defined(HOTEND2_PULLUP_RESISTOR_OHMS) && defined(HOTEND2_RESISTANCE_25C_OHMS) && defined(HOTEND2_BETA)) +#elif TEMP_SENSOR_2_IS_CUSTOM && !(defined(HOTEND2_PULLUP_RESISTOR_OHMS) && defined(HOTEND2_RESISTANCE_25C_OHMS) && defined(HOTEND2_BETA)) #error "TEMP_SENSOR_2 1000 requires HOTEND2_PULLUP_RESISTOR_OHMS, HOTEND2_RESISTANCE_25C_OHMS and HOTEND2_BETA in Configuration_adv.h." -#elif HEATER_3_USER_THERMISTOR && !(defined(HOTEND3_PULLUP_RESISTOR_OHMS) && defined(HOTEND3_RESISTANCE_25C_OHMS) && defined(HOTEND3_BETA)) +#elif TEMP_SENSOR_3_IS_CUSTOM && !(defined(HOTEND3_PULLUP_RESISTOR_OHMS) && defined(HOTEND3_RESISTANCE_25C_OHMS) && defined(HOTEND3_BETA)) #error "TEMP_SENSOR_3 1000 requires HOTEND3_PULLUP_RESISTOR_OHMS, HOTEND3_RESISTANCE_25C_OHMS and HOTEND3_BETA in Configuration_adv.h." -#elif HEATER_4_USER_THERMISTOR && !(defined(HOTEND4_PULLUP_RESISTOR_OHMS) && defined(HOTEND4_RESISTANCE_25C_OHMS) && defined(HOTEND4_BETA)) +#elif TEMP_SENSOR_4_IS_CUSTOM && !(defined(HOTEND4_PULLUP_RESISTOR_OHMS) && defined(HOTEND4_RESISTANCE_25C_OHMS) && defined(HOTEND4_BETA)) #error "TEMP_SENSOR_4 1000 requires HOTEND4_PULLUP_RESISTOR_OHMS, HOTEND4_RESISTANCE_25C_OHMS and HOTEND4_BETA in Configuration_adv.h." -#elif HEATER_5_USER_THERMISTOR && !(defined(HOTEND5_PULLUP_RESISTOR_OHMS) && defined(HOTEND5_RESISTANCE_25C_OHMS) && defined(HOTEND5_BETA)) +#elif TEMP_SENSOR_5_IS_CUSTOM && !(defined(HOTEND5_PULLUP_RESISTOR_OHMS) && defined(HOTEND5_RESISTANCE_25C_OHMS) && defined(HOTEND5_BETA)) #error "TEMP_SENSOR_5 1000 requires HOTEND5_PULLUP_RESISTOR_OHMS, HOTEND5_RESISTANCE_25C_OHMS and HOTEND5_BETA in Configuration_adv.h." -#elif HEATER_6_USER_THERMISTOR && !(defined(HOTEND6_PULLUP_RESISTOR_OHMS) && defined(HOTEND6_RESISTANCE_25C_OHMS) && defined(HOTEND6_BETA)) +#elif TEMP_SENSOR_6_IS_CUSTOM && !(defined(HOTEND6_PULLUP_RESISTOR_OHMS) && defined(HOTEND6_RESISTANCE_25C_OHMS) && defined(HOTEND6_BETA)) #error "TEMP_SENSOR_6 1000 requires HOTEND6_PULLUP_RESISTOR_OHMS, HOTEND6_RESISTANCE_25C_OHMS and HOTEND6_BETA in Configuration_adv.h." -#elif HEATER_7_USER_THERMISTOR && !(defined(HOTEND7_PULLUP_RESISTOR_OHMS) && defined(HOTEND7_RESISTANCE_25C_OHMS) && defined(HOTEND7_BETA)) +#elif TEMP_SENSOR_7_IS_CUSTOM && !(defined(HOTEND7_PULLUP_RESISTOR_OHMS) && defined(HOTEND7_RESISTANCE_25C_OHMS) && defined(HOTEND7_BETA)) #error "TEMP_SENSOR_7 1000 requires HOTEND7_PULLUP_RESISTOR_OHMS, HOTEND7_RESISTANCE_25C_OHMS and HOTEND7_BETA in Configuration_adv.h." -#elif HEATER_BED_USER_THERMISTOR && !(defined(BED_PULLUP_RESISTOR_OHMS) && defined(BED_RESISTANCE_25C_OHMS) && defined(BED_BETA)) +#elif TEMP_SENSOR_BED_IS_CUSTOM && !(defined(BED_PULLUP_RESISTOR_OHMS) && defined(BED_RESISTANCE_25C_OHMS) && defined(BED_BETA)) #error "TEMP_SENSOR_BED 1000 requires BED_PULLUP_RESISTOR_OHMS, BED_RESISTANCE_25C_OHMS and BED_BETA in Configuration_adv.h." -#elif HEATER_CHAMBER_USER_THERMISTOR && !(defined(CHAMBER_PULLUP_RESISTOR_OHMS) && defined(CHAMBER_RESISTANCE_25C_OHMS) && defined(CHAMBER_BETA)) +#elif TEMP_SENSOR_CHAMBER_IS_CUSTOM && !(defined(CHAMBER_PULLUP_RESISTOR_OHMS) && defined(CHAMBER_RESISTANCE_25C_OHMS) && defined(CHAMBER_BETA)) #error "TEMP_SENSOR_CHAMBER 1000 requires CHAMBER_PULLUP_RESISTOR_OHMS, CHAMBER_RESISTANCE_25C_OHMS and CHAMBER_BETA in Configuration_adv.h." +#elif TEMP_SENSOR_PROBE_IS_CUSTOM && !(defined(PROBE_PULLUP_RESISTOR_OHMS) && defined(PROBE_RESISTANCE_25C_OHMS) && defined(PROBE_BETA)) + #error "TEMP_SENSOR_PROBE 1000 requires PROBE_PULLUP_RESISTOR_OHMS, PROBE_RESISTANCE_25C_OHMS and PROBE_BETA in Configuration_adv.h." #endif /** * Pins and Sensor IDs must be set for each heater */ -#if HEATER_0_USES_MAX6675 && !PIN_EXISTS(MAX6675_SS) - #error "MAX6675_SS_PIN (required for TEMP_SENSOR_0) not defined for this board." -#elif HAS_HOTEND && !HAS_TEMP_HOTEND && !HEATER_0_DUMMY_THERMISTOR +#if TEMP_SENSOR_0_IS_MAX6675 && !ANY_PIN(MAX6675_SS, MAX31855_CS, MAX31865_CS, MAX6675_CS) + #error "TEMP_SENSOR_0 requires a MAX6675_SS_PIN, MAX6675_CS_PIN, MAX31855_CS_PIN, or MAX31865_CS_PIN." +#elif HAS_HOTEND && !HAS_TEMP_HOTEND && !TEMP_SENSOR_0_IS_DUMMY #error "TEMP_0_PIN (required for TEMP_SENSOR_0) not defined for this board." #elif EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL) && !HAS_HEATER_1 #error "HEATER_1_PIN is not defined. TEMP_SENSOR_1 might not be set, or the board (not EEB / EEF?) doesn't define a pin." #endif #if HAS_MULTI_HOTEND - #if HEATER_1_USES_MAX6675 && !PIN_EXISTS(MAX6675_SS2) - #error "MAX6675_SS2_PIN (required for TEMP_SENSOR_1) not defined for this board." + #if TEMP_SENSOR_1_IS_MAX6675 && !ANY_PIN(MAX6675_SS2, MAX31855_CS2, MAX31865_CS2, MAX6675_CS2) + #error "TEMP_SENSOR_1 requires a MAX6675_SS2_PIN, MAX6675_CS2_PIN, MAX31855_CS2_PIN, or MAX31865_CS2_PIN." #elif TEMP_SENSOR_1 == 0 #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS." - #elif !ANY_PIN(TEMP_1, MAX6675_SS2) && !HEATER_1_DUMMY_THERMISTOR - #error "TEMP_1_PIN not defined for this board." + #elif !ANY_PIN(TEMP_1, MAX6675_SS2) && !TEMP_SENSOR_1_IS_DUMMY + #error "TEMP_1_PIN or MAX6675_SS2_PIN not defined for this board." #elif ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) #error "HOTENDS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT." #endif @@ -1746,7 +1748,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #error "TEMP_SENSOR_2 is required with 3 or more HOTENDS." #elif !HAS_HEATER_2 #error "HEATER_2_PIN not defined for this board." - #elif !PIN_EXISTS(TEMP_2) && !HEATER_2_DUMMY_THERMISTOR + #elif !PIN_EXISTS(TEMP_2) && !TEMP_SENSOR_2_IS_DUMMY #error "TEMP_2_PIN not defined for this board." #endif #if HOTENDS > 3 @@ -1754,7 +1756,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #error "TEMP_SENSOR_3 is required with 4 or more HOTENDS." #elif !HAS_HEATER_3 #error "HEATER_3_PIN not defined for this board." - #elif !PIN_EXISTS(TEMP_3) && !HEATER_3_DUMMY_THERMISTOR + #elif !PIN_EXISTS(TEMP_3) && !TEMP_SENSOR_3_IS_DUMMY #error "TEMP_3_PIN not defined for this board." #endif #if HOTENDS > 4 @@ -1762,7 +1764,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #error "TEMP_SENSOR_4 is required with 5 or more HOTENDS." #elif !HAS_HEATER_4 #error "HEATER_4_PIN not defined for this board." - #elif !PIN_EXISTS(TEMP_4) && !HEATER_4_DUMMY_THERMISTOR + #elif !PIN_EXISTS(TEMP_4) && !TEMP_SENSOR_4_IS_DUMMY #error "TEMP_4_PIN not defined for this board." #endif #if HOTENDS > 5 @@ -1770,7 +1772,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #error "TEMP_SENSOR_5 is required with 6 HOTENDS." #elif !HAS_HEATER_5 #error "HEATER_5_PIN not defined for this board." - #elif !PIN_EXISTS(TEMP_5) && !HEATER_5_DUMMY_THERMISTOR + #elif !PIN_EXISTS(TEMP_5) && !TEMP_SENSOR_5_IS_DUMMY #error "TEMP_5_PIN not defined for this board." #endif #if HOTENDS > 6 @@ -1778,7 +1780,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #error "TEMP_SENSOR_6 is required with 6 HOTENDS." #elif !HAS_HEATER_6 #error "HEATER_6_PIN not defined for this board." - #elif !PIN_EXISTS(TEMP_6) && !HEATER_6_DUMMY_THERMISTOR + #elif !PIN_EXISTS(TEMP_6) && !TEMP_SENSOR_6_IS_DUMMY #error "TEMP_6_PIN not defined for this board." #endif #if HOTENDS > 7 @@ -1786,7 +1788,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #error "TEMP_SENSOR_7 is required with 7 HOTENDS." #elif !HAS_HEATER_7 #error "HEATER_7_PIN not defined for this board." - #elif !PIN_EXISTS(TEMP_7) && !HEATER_7_DUMMY_THERMISTOR + #elif !PIN_EXISTS(TEMP_7) && !TEMP_SENSOR_7_IS_DUMMY #error "TEMP_7_PIN not defined for this board." #endif #elif TEMP_SENSOR_7 != 0 @@ -1895,9 +1897,9 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT." #endif -#if MAX6675_0_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS_0) && defined(MAX31865_CALIBRATION_OHMS_0)) +#if TEMP_SENSOR_0_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS_0) && defined(MAX31865_CALIBRATION_OHMS_0)) #error "MAX31865_SENSOR_OHMS_0 and MAX31865_CALIBRATION_OHMS_0 must be set if TEMP_SENSOR_0 is MAX31865." -#elif MAX6675_1_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS_1) && defined(MAX31865_CALIBRATION_OHMS_1)) +#elif TEMP_SENSOR_1_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS_1) && defined(MAX31865_CALIBRATION_OHMS_1)) #error "MAX31865_SENSOR_OHMS_1 and MAX31865_CALIBRATION_OHMS_1 must be set if TEMP_SENSOR_1 is MAX31865." #endif diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index f6d22420f..c93532386 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -47,12 +47,12 @@ #include "../lcd/extui/ui_api.h" #endif -#if MAX6675_0_IS_MAX31865 || MAX6675_1_IS_MAX31865 +#if HAS_MAX31865 #include - #if MAX6675_0_IS_MAX31865 && !defined(MAX31865_CS_PIN) && PIN_EXISTS(MAX6675_SS) + #if TEMP_SENSOR_0_IS_MAX31865 && !defined(MAX31865_CS_PIN) && PIN_EXISTS(MAX6675_SS) #define MAX31865_CS_PIN MAX6675_SS_PIN #endif - #if MAX6675_1_IS_MAX31865 && !defined(MAX31865_CS2_PIN) && PIN_EXISTS(MAX6675_SS2) + #if TEMP_SENSOR_1_IS_MAX31865 && !defined(MAX31865_CS2_PIN) && PIN_EXISTS(MAX6675_SS2) #define MAX31865_CS2_PIN MAX6675_SS2_PIN #endif #ifndef MAX31865_MOSI_PIN @@ -64,16 +64,16 @@ #ifndef MAX31865_SCK_PIN #define MAX31865_SCK_PIN MAX6675_SCK_PIN #endif - #if MAX6675_0_IS_MAX31865 && PIN_EXISTS(MAX31865_CS) - #define HAS_MAX31865 1 + #if TEMP_SENSOR_0_IS_MAX31865 && PIN_EXISTS(MAX31865_CS) + #define HAS_MAX31865_TEMP 1 Adafruit_MAX31865 max31865_0 = Adafruit_MAX31865(MAX31865_CS_PIN #if MAX31865_CS_PIN != MAX6675_SS_PIN , MAX31865_MOSI_PIN, MAX31865_MISO_PIN, MAX31865_SCK_PIN // For software SPI also set MOSI/MISO/SCK #endif ); #endif - #if MAX6675_1_IS_MAX31865 && PIN_EXISTS(MAX31865_CS2) - #define HAS_MAX31865 1 + #if TEMP_SENSOR_1_IS_MAX31865 && PIN_EXISTS(MAX31865_CS2) + #define HAS_MAX31865_TEMP 1 Adafruit_MAX31865 max31865_1 = Adafruit_MAX31865(MAX31865_CS2_PIN #if MAX31865_CS2_PIN != MAX6675_SS2_PIN , MAX31865_MOSI_PIN, MAX31865_MISO_PIN, MAX31865_SCK_PIN // For software SPI also set MOSI/MISO/SCK @@ -82,11 +82,11 @@ #endif #endif -#if EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) && PINS_EXIST(MAX6675_SCK, MAX6675_DO) - #define MAX6675_SEPARATE_SPI 1 +#if (TEMP_SENSOR_0_IS_MAX_TC || TEMP_SENSOR_1_IS_MAX_TC) && PINS_EXIST(MAX6675_SCK, MAX6675_DO) && NO_THERMO_TEMPS + #define THERMO_SEPARATE_SPI 1 #endif -#if MAX6675_SEPARATE_SPI +#if THERMO_SEPARATE_SPI #include "../libs/private_spi.h" #endif @@ -132,20 +132,20 @@ #include "./servo.h" #endif -#if ANY(HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, HEATER_3_USES_THERMISTOR, \ - HEATER_4_USES_THERMISTOR, HEATER_5_USES_THERMISTOR, HEATER_6_USES_THERMISTOR, HEATER_7_USES_THERMISTOR ) +#if ANY(TEMP_SENSOR_0_IS_THERMISTOR, TEMP_SENSOR_1_IS_THERMISTOR, TEMP_SENSOR_2_IS_THERMISTOR, TEMP_SENSOR_3_IS_THERMISTOR, \ + TEMP_SENSOR_4_IS_THERMISTOR, TEMP_SENSOR_5_IS_THERMISTOR, TEMP_SENSOR_6_IS_THERMISTOR, TEMP_SENSOR_7_IS_THERMISTOR ) #define HAS_HOTEND_THERMISTOR 1 #endif #if HAS_HOTEND_THERMISTOR #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) - static const temp_entry_t* heater_ttbl_map[2] = { HEATER_0_TEMPTABLE, HEATER_1_TEMPTABLE }; - static constexpr uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN }; + static const temp_entry_t* heater_ttbl_map[2] = { TEMPTABLE_0, TEMPTABLE_1 }; + static constexpr uint8_t heater_ttbllen_map[2] = { TEMPTABLE_0_LEN, TEMPTABLE_1_LEN }; #else - #define NEXT_TEMPTABLE(N) ,HEATER_##N##_TEMPTABLE - #define NEXT_TEMPTABLE_LEN(N) ,HEATER_##N##_TEMPTABLE_LEN - static const temp_entry_t* heater_ttbl_map[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_TEMPTABLE REPEAT_S(1, HOTENDS, NEXT_TEMPTABLE)); - static constexpr uint8_t heater_ttbllen_map[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_TEMPTABLE_LEN REPEAT_S(1, HOTENDS, NEXT_TEMPTABLE_LEN)); + #define NEXT_TEMPTABLE(N) ,TEMPTABLE_##N + #define NEXT_TEMPTABLE_LEN(N) ,TEMPTABLE_##N##_LEN + static const temp_entry_t* heater_ttbl_map[HOTENDS] = ARRAY_BY_HOTENDS(TEMPTABLE_0 REPEAT_S(1, HOTENDS, NEXT_TEMPTABLE)); + static constexpr uint8_t heater_ttbllen_map[HOTENDS] = ARRAY_BY_HOTENDS(TEMPTABLE_0_LEN REPEAT_S(1, HOTENDS, NEXT_TEMPTABLE_LEN)); #endif #endif @@ -285,10 +285,10 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY, bed_info_t Temperature::temp_bed; // = { 0 } // Init min and max temp with extreme values to prevent false errors during startup #ifdef BED_MINTEMP - int16_t Temperature::mintemp_raw_BED = HEATER_BED_RAW_LO_TEMP; + int16_t Temperature::mintemp_raw_BED = TEMP_SENSOR_BED_RAW_LO_TEMP; #endif #ifdef BED_MAXTEMP - int16_t Temperature::maxtemp_raw_BED = HEATER_BED_RAW_HI_TEMP; + int16_t Temperature::maxtemp_raw_BED = TEMP_SENSOR_BED_RAW_HI_TEMP; #endif TERN_(WATCH_BED, bed_watch_t Temperature::watch_bed); // = { 0 } IF_DISABLED(PIDTEMPBED, millis_t Temperature::next_bed_check_ms); @@ -303,10 +303,10 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY, millis_t next_cool_check_ms_2 = 0; float old_temp = 9999; #ifdef CHAMBER_MINTEMP - int16_t Temperature::mintemp_raw_CHAMBER = HEATER_CHAMBER_RAW_LO_TEMP; + int16_t Temperature::mintemp_raw_CHAMBER = TEMP_SENSOR_CHAMBER_RAW_LO_TEMP; #endif #ifdef CHAMBER_MAXTEMP - int16_t Temperature::maxtemp_raw_CHAMBER = HEATER_CHAMBER_RAW_HI_TEMP; + int16_t Temperature::maxtemp_raw_CHAMBER = TEMP_SENSOR_CHAMBER_RAW_HI_TEMP; #endif #if WATCH_CHAMBER chamber_watch_t Temperature::watch_chamber{0}; @@ -347,18 +347,18 @@ volatile bool Temperature::raw_temps_ready = false; lpq_ptr_t Temperature::lpq_ptr = 0; #endif -#define TEMPDIR(N) ((HEATER_##N##_RAW_LO_TEMP) < (HEATER_##N##_RAW_HI_TEMP) ? 1 : -1) +#define TEMPDIR(N) ((TEMP_SENSOR_##N##_RAW_LO_TEMP) < (TEMP_SENSOR_##N##_RAW_HI_TEMP) ? 1 : -1) #if HAS_HOTEND // Init mintemp and maxtemp with extreme values to prevent false errors during startup - constexpr temp_range_t sensor_heater_0 { HEATER_0_RAW_LO_TEMP, HEATER_0_RAW_HI_TEMP, 0, 16383 }, - sensor_heater_1 { HEATER_1_RAW_LO_TEMP, HEATER_1_RAW_HI_TEMP, 0, 16383 }, - sensor_heater_2 { HEATER_2_RAW_LO_TEMP, HEATER_2_RAW_HI_TEMP, 0, 16383 }, - sensor_heater_3 { HEATER_3_RAW_LO_TEMP, HEATER_3_RAW_HI_TEMP, 0, 16383 }, - sensor_heater_4 { HEATER_4_RAW_LO_TEMP, HEATER_4_RAW_HI_TEMP, 0, 16383 }, - sensor_heater_5 { HEATER_5_RAW_LO_TEMP, HEATER_5_RAW_HI_TEMP, 0, 16383 }, - sensor_heater_6 { HEATER_6_RAW_LO_TEMP, HEATER_6_RAW_HI_TEMP, 0, 16383 }, - sensor_heater_7 { HEATER_7_RAW_LO_TEMP, HEATER_7_RAW_HI_TEMP, 0, 16383 }; + constexpr temp_range_t sensor_heater_0 { TEMP_SENSOR_0_RAW_LO_TEMP, TEMP_SENSOR_0_RAW_HI_TEMP, 0, 16383 }, + sensor_heater_1 { TEMP_SENSOR_1_RAW_LO_TEMP, TEMP_SENSOR_1_RAW_HI_TEMP, 0, 16383 }, + sensor_heater_2 { TEMP_SENSOR_2_RAW_LO_TEMP, TEMP_SENSOR_2_RAW_HI_TEMP, 0, 16383 }, + sensor_heater_3 { TEMP_SENSOR_3_RAW_LO_TEMP, TEMP_SENSOR_3_RAW_HI_TEMP, 0, 16383 }, + sensor_heater_4 { TEMP_SENSOR_4_RAW_LO_TEMP, TEMP_SENSOR_4_RAW_HI_TEMP, 0, 16383 }, + sensor_heater_5 { TEMP_SENSOR_5_RAW_LO_TEMP, TEMP_SENSOR_5_RAW_HI_TEMP, 0, 16383 }, + sensor_heater_6 { TEMP_SENSOR_6_RAW_LO_TEMP, TEMP_SENSOR_6_RAW_HI_TEMP, 0, 16383 }, + sensor_heater_7 { TEMP_SENSOR_7_RAW_LO_TEMP, TEMP_SENSOR_7_RAW_HI_TEMP, 0, 16383 }; temp_range_t Temperature::temp_range[HOTENDS] = ARRAY_BY_HOTENDS(sensor_heater_0, sensor_heater_1, sensor_heater_2, sensor_heater_3, sensor_heater_4, sensor_heater_5, sensor_heater_6, sensor_heater_7); #endif @@ -1083,13 +1083,13 @@ void Temperature::manage_heater() { updateTemperaturesFromRawValues(); // also resets the watchdog #if DISABLED(IGNORE_THERMOCOUPLE_ERRORS) - #if HEATER_0_USES_MAX6675 - if (temp_hotend[0].celsius > _MIN(HEATER_0_MAXTEMP, HEATER_0_MAX6675_TMAX - 1.0)) max_temp_error(H_E0); - if (temp_hotend[0].celsius < _MAX(HEATER_0_MINTEMP, HEATER_0_MAX6675_TMIN + .01)) min_temp_error(H_E0); + #if TEMP_SENSOR_0_IS_MAX_TC + if (temp_hotend[0].celsius > _MIN(HEATER_0_MAXTEMP, TEMP_SENSOR_0_MAX_TC_TMAX - 1.0)) max_temp_error(H_E0); + if (temp_hotend[0].celsius < _MAX(HEATER_0_MINTEMP, TEMP_SENSOR_0_MAX_TC_TMIN + .01)) min_temp_error(H_E0); #endif - #if HEATER_1_USES_MAX6675 - if (temp_hotend[1].celsius > _MIN(HEATER_1_MAXTEMP, HEATER_1_MAX6675_TMAX - 1.0)) max_temp_error(H_E1); - if (temp_hotend[1].celsius < _MAX(HEATER_1_MINTEMP, HEATER_1_MAX6675_TMIN + .01)) min_temp_error(H_E1); + #if TEMP_SENSOR_1_IS_MAX_TC + if (temp_hotend[1].celsius > _MIN(HEATER_1_MAXTEMP, TEMP_SENSOR_1_MAX_TC_TMAX - 1.0)) max_temp_error(H_E1); + if (temp_hotend[1].celsius < _MAX(HEATER_1_MINTEMP, TEMP_SENSOR_1_MAX_TC_TMIN + .01)) min_temp_error(H_E1); #endif #endif @@ -1373,36 +1373,39 @@ void Temperature::manage_heater() { void Temperature::reset_user_thermistors() { user_thermistor_t default_user_thermistor[USER_THERMISTORS] = { - #if HEATER_0_USER_THERMISTOR + #if TEMP_SENSOR_0_IS_CUSTOM { true, 0, 0, HOTEND0_PULLUP_RESISTOR_OHMS, HOTEND0_RESISTANCE_25C_OHMS, 0, 0, HOTEND0_BETA, 0 }, #endif - #if HEATER_1_USER_THERMISTOR + #if TEMP_SENSOR_1_IS_CUSTOM { true, 0, 0, HOTEND1_PULLUP_RESISTOR_OHMS, HOTEND1_RESISTANCE_25C_OHMS, 0, 0, HOTEND1_BETA, 0 }, #endif - #if HEATER_2_USER_THERMISTOR + #if TEMP_SENSOR_2_IS_CUSTOM { true, 0, 0, HOTEND2_PULLUP_RESISTOR_OHMS, HOTEND2_RESISTANCE_25C_OHMS, 0, 0, HOTEND2_BETA, 0 }, #endif - #if HEATER_3_USER_THERMISTOR + #if TEMP_SENSOR_3_IS_CUSTOM { true, 0, 0, HOTEND3_PULLUP_RESISTOR_OHMS, HOTEND3_RESISTANCE_25C_OHMS, 0, 0, HOTEND3_BETA, 0 }, #endif - #if HEATER_4_USER_THERMISTOR + #if TEMP_SENSOR_4_IS_CUSTOM { true, 0, 0, HOTEND4_PULLUP_RESISTOR_OHMS, HOTEND4_RESISTANCE_25C_OHMS, 0, 0, HOTEND4_BETA, 0 }, #endif - #if HEATER_5_USER_THERMISTOR + #if TEMP_SENSOR_5_IS_CUSTOM { true, 0, 0, HOTEND5_PULLUP_RESISTOR_OHMS, HOTEND5_RESISTANCE_25C_OHMS, 0, 0, HOTEND5_BETA, 0 }, #endif - #if HEATER_6_USER_THERMISTOR + #if TEMP_SENSOR_6_IS_CUSTOM { true, 0, 0, HOTEND6_PULLUP_RESISTOR_OHMS, HOTEND6_RESISTANCE_25C_OHMS, 0, 0, HOTEND6_BETA, 0 }, #endif - #if HEATER_7_USER_THERMISTOR + #if TEMP_SENSOR_7_IS_CUSTOM { true, 0, 0, HOTEND7_PULLUP_RESISTOR_OHMS, HOTEND7_RESISTANCE_25C_OHMS, 0, 0, HOTEND7_BETA, 0 }, #endif - #if HEATER_BED_USER_THERMISTOR + #if TEMP_SENSOR_BED_IS_CUSTOM { true, 0, 0, BED_PULLUP_RESISTOR_OHMS, BED_RESISTANCE_25C_OHMS, 0, 0, BED_BETA, 0 }, #endif - #if HEATER_CHAMBER_USER_THERMISTOR + #if TEMP_SENSOR_CHAMBER_IS_CUSTOM { true, 0, 0, CHAMBER_PULLUP_RESISTOR_OHMS, CHAMBER_RESISTANCE_25C_OHMS, 0, 0, CHAMBER_BETA, 0 } #endif + #if TEMP_SENSOR_PROBE_IS_CUSTOM + { true, 0, 0, PROBE_PULLUP_RESISTOR_OHMS, PROBE_RESISTANCE_25C_OHMS, 0, 0, PROBE_BETA, 0 } + #endif }; COPY(user_thermistor, default_user_thermistor); } @@ -1423,16 +1426,17 @@ void Temperature::manage_heater() { SERIAL_ECHOPAIR_F_P(SP_C_STR, t.sh_c_coeff, 9); SERIAL_ECHOPGM(" ; "); serialprintPGM( - TERN_(HEATER_0_USER_THERMISTOR, t_index == CTI_HOTEND_0 ? PSTR("HOTEND 0") :) - TERN_(HEATER_1_USER_THERMISTOR, t_index == CTI_HOTEND_1 ? PSTR("HOTEND 1") :) - TERN_(HEATER_2_USER_THERMISTOR, t_index == CTI_HOTEND_2 ? PSTR("HOTEND 2") :) - TERN_(HEATER_3_USER_THERMISTOR, t_index == CTI_HOTEND_3 ? PSTR("HOTEND 3") :) - TERN_(HEATER_4_USER_THERMISTOR, t_index == CTI_HOTEND_4 ? PSTR("HOTEND 4") :) - TERN_(HEATER_5_USER_THERMISTOR, t_index == CTI_HOTEND_5 ? PSTR("HOTEND 5") :) - TERN_(HEATER_6_USER_THERMISTOR, t_index == CTI_HOTEND_6 ? PSTR("HOTEND 6") :) - TERN_(HEATER_7_USER_THERMISTOR, t_index == CTI_HOTEND_7 ? PSTR("HOTEND 7") :) - TERN_(HEATER_BED_USER_THERMISTOR, t_index == CTI_BED ? PSTR("BED") :) - TERN_(HEATER_CHAMBER_USER_THERMISTOR, t_index == CTI_CHAMBER ? PSTR("CHAMBER") :) + TERN_(TEMP_SENSOR_0_IS_CUSTOM, t_index == CTI_HOTEND_0 ? PSTR("HOTEND 0") :) + TERN_(TEMP_SENSOR_1_IS_CUSTOM, t_index == CTI_HOTEND_1 ? PSTR("HOTEND 1") :) + TERN_(TEMP_SENSOR_2_IS_CUSTOM, t_index == CTI_HOTEND_2 ? PSTR("HOTEND 2") :) + TERN_(TEMP_SENSOR_3_IS_CUSTOM, t_index == CTI_HOTEND_3 ? PSTR("HOTEND 3") :) + TERN_(TEMP_SENSOR_4_IS_CUSTOM, t_index == CTI_HOTEND_4 ? PSTR("HOTEND 4") :) + TERN_(TEMP_SENSOR_5_IS_CUSTOM, t_index == CTI_HOTEND_5 ? PSTR("HOTEND 5") :) + TERN_(TEMP_SENSOR_6_IS_CUSTOM, t_index == CTI_HOTEND_6 ? PSTR("HOTEND 6") :) + TERN_(TEMP_SENSOR_7_IS_CUSTOM, t_index == CTI_HOTEND_7 ? PSTR("HOTEND 7") :) + TERN_(TEMP_SENSOR_BED_IS_CUSTOM, t_index == CTI_BED ? PSTR("BED") :) + TERN_(TEMP_SENSOR_CHAMBER_IS_CUSTOM, t_index == CTI_CHAMBER ? PSTR("CHAMBER") :) + TERN_(TEMP_SENSOR_PROBE_IS_CUSTOM, t_index == CTI_PROBE ? PSTR("PROBE") :) nullptr ); SERIAL_EOL(); @@ -1498,85 +1502,85 @@ void Temperature::manage_heater() { switch (e) { case 0: - #if HEATER_0_USER_THERMISTOR + #if TEMP_SENSOR_0_IS_CUSTOM return user_thermistor_to_deg_c(CTI_HOTEND_0, raw); - #elif HEATER_0_USES_MAX6675 - return TERN(MAX6675_0_IS_MAX31865, max31865_0.temperature(MAX31865_SENSOR_OHMS_0, MAX31865_CALIBRATION_OHMS_0), raw * 0.25); - #elif HEATER_0_USES_AD595 + #elif TEMP_SENSOR_0_IS_MAX_TC + return TERN(TEMP_SENSOR_0_IS_MAX31865, max31865_0.temperature(MAX31865_SENSOR_OHMS_0, MAX31865_CALIBRATION_OHMS_0), raw * 0.25); + #elif TEMP_SENSOR_0_IS_AD595 return TEMP_AD595(raw); - #elif HEATER_0_USES_AD8495 + #elif TEMP_SENSOR_0_IS_AD8495 return TEMP_AD8495(raw); #else break; #endif case 1: - #if HEATER_1_USER_THERMISTOR + #if TEMP_SENSOR_1_IS_CUSTOM return user_thermistor_to_deg_c(CTI_HOTEND_1, raw); - #elif HEATER_1_USES_MAX6675 - return TERN(MAX6675_1_IS_MAX31865, max31865_1.temperature(MAX31865_SENSOR_OHMS_1, MAX31865_CALIBRATION_OHMS_1), raw * 0.25); - #elif HEATER_1_USES_AD595 + #elif TEMP_SENSOR_1_IS_MAX_TC + return TERN(TEMP_SENSOR_1_IS_MAX31865, max31865_1.temperature(MAX31865_SENSOR_OHMS_1, MAX31865_CALIBRATION_OHMS_1), raw * 0.25); + #elif TEMP_SENSOR_1_IS_AD595 return TEMP_AD595(raw); - #elif HEATER_1_USES_AD8495 + #elif TEMP_SENSOR_1_IS_AD8495 return TEMP_AD8495(raw); #else break; #endif case 2: - #if HEATER_2_USER_THERMISTOR + #if TEMP_SENSOR_2_IS_CUSTOM return user_thermistor_to_deg_c(CTI_HOTEND_2, raw); - #elif HEATER_2_USES_AD595 + #elif TEMP_SENSOR_2_IS_AD595 return TEMP_AD595(raw); - #elif HEATER_2_USES_AD8495 + #elif TEMP_SENSOR_2_IS_AD8495 return TEMP_AD8495(raw); #else break; #endif case 3: - #if HEATER_3_USER_THERMISTOR + #if TEMP_SENSOR_3_IS_CUSTOM return user_thermistor_to_deg_c(CTI_HOTEND_3, raw); - #elif HEATER_3_USES_AD595 + #elif TEMP_SENSOR_3_IS_AD595 return TEMP_AD595(raw); - #elif HEATER_3_USES_AD8495 + #elif TEMP_SENSOR_3_IS_AD8495 return TEMP_AD8495(raw); #else break; #endif case 4: - #if HEATER_4_USER_THERMISTOR + #if TEMP_SENSOR_4_IS_CUSTOM return user_thermistor_to_deg_c(CTI_HOTEND_4, raw); - #elif HEATER_4_USES_AD595 + #elif TEMP_SENSOR_4_IS_AD595 return TEMP_AD595(raw); - #elif HEATER_4_USES_AD8495 + #elif TEMP_SENSOR_4_IS_AD8495 return TEMP_AD8495(raw); #else break; #endif case 5: - #if HEATER_5_USER_THERMISTOR + #if TEMP_SENSOR_5_IS_CUSTOM return user_thermistor_to_deg_c(CTI_HOTEND_5, raw); - #elif HEATER_5_USES_AD595 + #elif TEMP_SENSOR_5_IS_AD595 return TEMP_AD595(raw); - #elif HEATER_5_USES_AD8495 + #elif TEMP_SENSOR_5_IS_AD8495 return TEMP_AD8495(raw); #else break; #endif case 6: - #if HEATER_6_USER_THERMISTOR + #if TEMP_SENSOR_6_IS_CUSTOM return user_thermistor_to_deg_c(CTI_HOTEND_6, raw); - #elif HEATER_6_USES_AD595 + #elif TEMP_SENSOR_6_IS_AD595 return TEMP_AD595(raw); - #elif HEATER_6_USES_AD8495 + #elif TEMP_SENSOR_6_IS_AD8495 return TEMP_AD8495(raw); #else break; #endif case 7: - #if HEATER_7_USER_THERMISTOR + #if TEMP_SENSOR_7_IS_CUSTOM return user_thermistor_to_deg_c(CTI_HOTEND_7, raw); - #elif HEATER_7_USES_AD595 + #elif TEMP_SENSOR_7_IS_AD595 return TEMP_AD595(raw); - #elif HEATER_7_USES_AD8495 + #elif TEMP_SENSOR_7_IS_AD8495 return TEMP_AD8495(raw); #else break; @@ -1598,13 +1602,13 @@ void Temperature::manage_heater() { // Derived from RepRap FiveD extruder::getTemperature() // For bed temperature measurement. float Temperature::analog_to_celsius_bed(const int raw) { - #if HEATER_BED_USER_THERMISTOR + #if TEMP_SENSOR_BED_IS_CUSTOM return user_thermistor_to_deg_c(CTI_BED, raw); - #elif HEATER_BED_USES_THERMISTOR - SCAN_THERMISTOR_TABLE(BED_TEMPTABLE, BED_TEMPTABLE_LEN); - #elif HEATER_BED_USES_AD595 + #elif TEMP_SENSOR_BED_IS_THERMISTOR + SCAN_THERMISTOR_TABLE(TEMPTABLE_BED, TEMPTABLE_BED_LEN); + #elif TEMP_SENSOR_BED_IS_AD595 return TEMP_AD595(raw); - #elif HEATER_BED_USES_AD8495 + #elif TEMP_SENSOR_BED_IS_AD8495 return TEMP_AD8495(raw); #else UNUSED(raw); @@ -1617,13 +1621,13 @@ void Temperature::manage_heater() { // Derived from RepRap FiveD extruder::getTemperature() // For chamber temperature measurement. float Temperature::analog_to_celsius_chamber(const int raw) { - #if HEATER_CHAMBER_USER_THERMISTOR + #if TEMP_SENSOR_CHAMBER_IS_CUSTOM return user_thermistor_to_deg_c(CTI_CHAMBER, raw); - #elif HEATER_CHAMBER_USES_THERMISTOR - SCAN_THERMISTOR_TABLE(CHAMBER_TEMPTABLE, CHAMBER_TEMPTABLE_LEN); - #elif HEATER_CHAMBER_USES_AD595 + #elif TEMP_SENSOR_CHAMBER_IS_THERMISTOR + SCAN_THERMISTOR_TABLE(TEMPTABLE_CHAMBER, TEMPTABLE_CHAMBER_LEN); + #elif TEMP_SENSOR_CHAMBER_IS_AD595 return TEMP_AD595(raw); - #elif HEATER_CHAMBER_USES_AD8495 + #elif TEMP_SENSOR_CHAMBER_IS_AD8495 return TEMP_AD8495(raw); #else UNUSED(raw); @@ -1636,13 +1640,13 @@ void Temperature::manage_heater() { // Derived from RepRap FiveD extruder::getTemperature() // For probe temperature measurement. float Temperature::analog_to_celsius_probe(const int raw) { - #if HEATER_PROBE_USER_THERMISTOR + #if TEMP_SENSOR_PROBE_IS_CUSTOM return user_thermistor_to_deg_c(CTI_PROBE, raw); - #elif HEATER_PROBE_USES_THERMISTOR - SCAN_THERMISTOR_TABLE(PROBE_TEMPTABLE, PROBE_TEMPTABLE_LEN); - #elif HEATER_PROBE_USES_AD595 + #elif TEMP_SENSOR_PROBE_IS_THERMISTOR + SCAN_THERMISTOR_TABLE(TEMPTABLE_PROBE, TEMPTABLE_PROBE_LEN); + #elif TEMP_SENSOR_PROBE_IS_AD595 return TEMP_AD595(raw); - #elif HEATER_PROBE_USES_AD8495 + #elif TEMP_SENSOR_PROBE_IS_AD8495 return TEMP_AD8495(raw); #else UNUSED(raw); @@ -1658,8 +1662,8 @@ void Temperature::manage_heater() { * as it would block the stepper routine. */ void Temperature::updateTemperaturesFromRawValues() { - TERN_(HEATER_0_USES_MAX6675, temp_hotend[0].raw = READ_MAX6675(0)); - TERN_(HEATER_1_USES_MAX6675, temp_hotend[1].raw = READ_MAX6675(1)); + TERN_(TEMP_SENSOR_0_IS_MAX_TC, temp_hotend[0].raw = READ_MAX_TC(0)); + TERN_(TEMP_SENSOR_1_IS_MAX_TC, temp_hotend[1].raw = READ_MAX_TC(1)); #if HAS_HOTEND HOTEND_LOOP() temp_hotend[e].celsius = analog_to_celsius_hotend(temp_hotend[e].raw, e); #endif @@ -1676,9 +1680,9 @@ void Temperature::updateTemperaturesFromRawValues() { raw_temps_ready = false; } -#if MAX6675_SEPARATE_SPI +#if THERMO_SEPARATE_SPI template SoftSPI SPIclass::softSPI; - SPIclass max6675_spi; + SPIclass max_tc_spi; #endif // Init fans according to whether they're native PWM or Software PWM @@ -1715,8 +1719,8 @@ void Temperature::updateTemperaturesFromRawValues() { */ void Temperature::init() { - TERN_(MAX6675_0_IS_MAX31865, max31865_0.begin(MAX31865_2WIRE)); // MAX31865_2WIRE, MAX31865_3WIRE, MAX31865_4WIRE - TERN_(MAX6675_1_IS_MAX31865, max31865_1.begin(MAX31865_2WIRE)); + TERN_(TEMP_SENSOR_0_IS_MAX31865, max31865_0.begin(MAX31865_2WIRE)); // MAX31865_2WIRE, MAX31865_3WIRE, MAX31865_4WIRE + TERN_(TEMP_SENSOR_1_IS_MAX31865, max31865_1.begin(MAX31865_2WIRE)); #if EARLY_WATCHDOG // Flag that the thermalManager should be running @@ -1726,7 +1730,7 @@ void Temperature::init() { #if MB(RUMBA) // Disable RUMBA JTAG in case the thermocouple extension is plugged on top of JTAG connector - #define _AD(N) (HEATER_##N##_USES_AD595 || HEATER_##N##_USES_AD8495) + #define _AD(N) (TEMP_SENSOR_##N##_IS_AD595 || TEMP_SENSOR_##N##_IS_AD8495) #if _AD(0) || _AD(1) || _AD(2) || _AD(BED) || _AD(CHAMBER) MCUCR = _BV(JTD); MCUCR = _BV(JTD); @@ -1734,11 +1738,11 @@ void Temperature::init() { #endif // Thermistor activation by MCU pin - #if PIN_EXISTS(TEMP_0_TR_ENABLE_PIN) - OUT_WRITE(TEMP_0_TR_ENABLE_PIN, ENABLED(HEATER_0_USES_MAX6675)); + #if PIN_EXISTS(TEMP_0_TR_ENABLE) + OUT_WRITE(TEMP_0_TR_ENABLE_PIN, ENABLED(TEMP_SENSOR_0_IS_MAX_TC)); #endif - #if PIN_EXISTS(TEMP_1_TR_ENABLE_PIN) - OUT_WRITE(TEMP_1_TR_ENABLE_PIN, ENABLED(HEATER_1_USES_MAX6675)); + #if PIN_EXISTS(TEMP_1_TR_ENABLE) + OUT_WRITE(TEMP_1_TR_ENABLE_PIN, ENABLED(TEMP_SENSOR_1_IS_MAX_TC)); #endif #if BOTH(PIDTEMP, PID_EXTRUSION_SCALING) @@ -1815,7 +1819,7 @@ void Temperature::init() { INIT_FAN_PIN(CONTROLLER_FAN_PIN); #endif - TERN_(MAX6675_SEPARATE_SPI, max6675_spi.init()); + TERN_(THERMO_SEPARATE_SPI, max_tc_spi.init()); HAL_adc_init(); @@ -1914,19 +1918,19 @@ void Temperature::init() { #if HAS_HOTEND #define _TEMP_MIN_E(NR) do{ \ - const int16_t tmin = _MAX(HEATER_ ##NR## _MINTEMP, TERN(HEATER_##NR##_USER_THERMISTOR, 0, (int16_t)pgm_read_word(&HEATER_ ##NR## _TEMPTABLE[HEATER_ ##NR## _SENSOR_MINTEMP_IND].celsius))); \ + const int16_t tmin = _MAX(HEATER_##NR##_MINTEMP, TERN(TEMP_SENSOR_##NR##_IS_CUSTOM, 0, (int16_t)pgm_read_word(&TEMPTABLE_##NR [TEMP_SENSOR_##NR##_MINTEMP_IND].celsius))); \ temp_range[NR].mintemp = tmin; \ while (analog_to_celsius_hotend(temp_range[NR].raw_min, NR) < tmin) \ temp_range[NR].raw_min += TEMPDIR(NR) * (OVERSAMPLENR); \ }while(0) #define _TEMP_MAX_E(NR) do{ \ - const int16_t tmax = _MIN(HEATER_ ##NR## _MAXTEMP, TERN(HEATER_##NR##_USER_THERMISTOR, 2000, (int16_t)pgm_read_word(&HEATER_ ##NR## _TEMPTABLE[HEATER_ ##NR## _SENSOR_MAXTEMP_IND].celsius) - 1)); \ + const int16_t tmax = _MIN(HEATER_##NR##_MAXTEMP, TERN(TEMP_SENSOR_##NR##_IS_CUSTOM, 2000, (int16_t)pgm_read_word(&TEMPTABLE_##NR [TEMP_SENSOR_##NR##_MAXTEMP_IND].celsius) - 1)); \ temp_range[NR].maxtemp = tmax; \ while (analog_to_celsius_hotend(temp_range[NR].raw_max, NR) > tmax) \ temp_range[NR].raw_max -= TEMPDIR(NR) * (OVERSAMPLENR); \ }while(0) - #define _MINMAX_TEST(N,M) (HOTENDS > N && THERMISTOR_HEATER_##N && THERMISTOR_HEATER_##N != 998 && THERMISTOR_HEATER_##N != 999 && defined(HEATER_##N##_##M##TEMP)) + #define _MINMAX_TEST(N,M) (HOTENDS > N && TEMP_SENSOR_ ##N## THERMISTOR_ID && TEMP_SENSOR_ ##N## THERMISTOR_ID != 998 && TEMP_SENSOR_ ##N## THERMISTOR_ID != 999 && defined(HEATER_##N##_##M##TEMP)) #if _MINMAX_TEST(0, MIN) _TEMP_MIN_E(0); @@ -2221,105 +2225,106 @@ void Temperature::disable_all_heaters() { #endif -#if HAS_MAX6675 +#if HAS_MAX_TC #ifndef THERMOCOUPLE_MAX_ERRORS #define THERMOCOUPLE_MAX_ERRORS 15 #endif - int Temperature::read_max6675(TERN_(HAS_MULTI_6675, const uint8_t hindex/*=0*/)) { + int Temperature::read_max_tc(TERN_(HAS_MULTI_MAX_TC, const uint8_t hindex/*=0*/)) { #define MAX6675_HEAT_INTERVAL 250UL - #if MAX6675_0_IS_MAX31855 || MAX6675_1_IS_MAX31855 - static uint32_t max6675_temp = 2000; - #define MAX6675_ERROR_MASK 7 - #define MAX6675_DISCARD_BITS 18 - #define MAX6675_SPEED_BITS 3 // (_BV(SPR1)) // clock ÷ 64 - #elif HAS_MAX31865 - static uint16_t max6675_temp = 2000; // From datasheet 16 bits D15-D0 - #define MAX6675_ERROR_MASK 1 // D0 Bit not used - #define MAX6675_DISCARD_BITS 1 // Data is in D15-D1 - #define MAX6675_SPEED_BITS 3 // (_BV(SPR1)) // clock ÷ 64 + #if HAS_MAX31855 + static uint32_t max_tc_temp = 2000; + #define MAX_TC_ERROR_MASK 7 + #define MAX_TC_DISCARD_BITS 18 + #define MAX_TC_SPEED_BITS 3 // (_BV(SPR1)) // clock ÷ 64 + #elif HAS_MAX31865_TEMP + static uint16_t max_tc_temp = 2000; // From datasheet 16 bits D15-D0 + #define MAX_TC_ERROR_MASK 1 // D0 Bit not used + #define MAX_TC_DISCARD_BITS 1 // Data is in D15-D1 + #define MAX_TC_SPEED_BITS 3 // (_BV(SPR1)) // clock ÷ 64 #else - static uint16_t max6675_temp = 2000; - #define MAX6675_ERROR_MASK 4 - #define MAX6675_DISCARD_BITS 3 - #define MAX6675_SPEED_BITS 2 // (_BV(SPR0)) // clock ÷ 16 + static uint16_t max_tc_temp = 2000; + #define MAX_TC_ERROR_MASK 4 + #define MAX_TC_DISCARD_BITS 3 + #define MAX_TC_SPEED_BITS 2 // (_BV(SPR0)) // clock ÷ 16 #endif - #if HAS_MULTI_6675 + #if HAS_MULTI_MAX_TC // Needed to return the correct temp when this is called between readings - static uint16_t max6675_temp_previous[COUNT_6675] = { 0 }; - #define MAX6675_TEMP(I) max6675_temp_previous[I] - #define MAX6675_SEL(A,B) (hindex ? (B) : (A)) + static uint16_t max_tc_temp_previous[MAX_TC_COUNT] = { 0 }; + #define THERMO_TEMP(I) max_tc_temp_previous[I] + #define THERMO_SEL(A,B) (hindex ? (B) : (A)) #define MAX6675_WRITE(V) do{ switch (hindex) { case 1: WRITE(MAX6675_SS2_PIN, V); break; default: WRITE(MAX6675_SS_PIN, V); } }while(0) #define MAX6675_SET_OUTPUT() do{ switch (hindex) { case 1: SET_OUTPUT(MAX6675_SS2_PIN); break; default: SET_OUTPUT(MAX6675_SS_PIN); } }while(0) #else constexpr uint8_t hindex = 0; - #define MAX6675_TEMP(I) max6675_temp - #if MAX6675_1_IS_MAX31865 - #define MAX6675_SEL(A,B) B + #define THERMO_TEMP(I) max_tc_temp + #if TEMP_SENSOR_1_IS_MAX31865 + #define THERMO_SEL(A,B) B #else - #define MAX6675_SEL(A,B) A + #define THERMO_SEL(A,B) A #endif - #if HEATER_0_USES_MAX6675 + #if TEMP_SENSOR_0_IS_MAX6675 #define MAX6675_WRITE(V) WRITE(MAX6675_SS_PIN, V) #define MAX6675_SET_OUTPUT() SET_OUTPUT(MAX6675_SS_PIN) #else #define MAX6675_WRITE(V) WRITE(MAX6675_SS2_PIN, V) #define MAX6675_SET_OUTPUT() SET_OUTPUT(MAX6675_SS2_PIN) #endif + #endif - static uint8_t max6675_errors[COUNT_6675] = { 0 }; + static uint8_t max_tc_errors[MAX_TC_COUNT] = { 0 }; // Return last-read value between readings - static millis_t next_max6675_ms[COUNT_6675] = { 0 }; + static millis_t next_max_tc_ms[MAX_TC_COUNT] = { 0 }; millis_t ms = millis(); - if (PENDING(ms, next_max6675_ms[hindex])) return int(MAX6675_TEMP(hindex)); - next_max6675_ms[hindex] = ms + MAX6675_HEAT_INTERVAL; + if (PENDING(ms, next_max_tc_ms[hindex])) return int(THERMO_TEMP(hindex)); + next_max_tc_ms[hindex] = ms + MAX6675_HEAT_INTERVAL; - #if HAS_MAX31865 - Adafruit_MAX31865 &maxref = MAX6675_SEL(max31865_0, max31865_1); - const uint16_t max31865_ohms = (uint32_t(maxref.readRTD()) * MAX6675_SEL(MAX31865_CALIBRATION_OHMS_0, MAX31865_CALIBRATION_OHMS_1)) >> 16; + #if HAS_MAX31865_TEMP + Adafruit_MAX31865 &maxref = THERMO_SEL(max31865_0, max31865_1); + const uint16_t max31865_ohms = (uint32_t(maxref.readRTD()) * THERMO_SEL(MAX31865_CALIBRATION_OHMS_0, MAX31865_CALIBRATION_OHMS_1)) >> 16; #endif // // TODO: spiBegin, spiRec and spiInit doesn't work when soft spi is used. // - #if !MAX6675_SEPARATE_SPI + #if !THERMO_SEPARATE_SPI spiBegin(); - spiInit(MAX6675_SPEED_BITS); + spiInit(MAX_TC_SPEED_BITS); #endif - MAX6675_WRITE(LOW); // enable TT_MAX6675 - DELAY_NS(100); // Ensure 100ns delay + MAX6675_WRITE(LOW); // enable TT_MAX6675 + DELAY_NS(100); // Ensure 100ns delay // Read a big-endian temperature value - max6675_temp = 0; - for (uint8_t i = sizeof(max6675_temp); i--;) { - max6675_temp |= TERN(MAX6675_SEPARATE_SPI, max6675_spi.receive(), spiRec()); - if (i > 0) max6675_temp <<= 8; // shift left if not the last byte + max_tc_temp = 0; + for (uint8_t i = sizeof(max_tc_temp); i--;) { + max_tc_temp |= TERN(THERMO_SEPARATE_SPI, max_tc_spi.receive(), spiRec()); + if (i > 0) max_tc_temp <<= 8; // shift left if not the last byte } MAX6675_WRITE(HIGH); // disable TT_MAX6675 - const uint8_t fault_31865 = TERN1(HAS_MAX31865, maxref.readFault()); + const uint8_t fault_31865 = TERN1(HAS_MAX31865_TEMP, maxref.readFault()); - if (DISABLED(IGNORE_THERMOCOUPLE_ERRORS) && (max6675_temp & MAX6675_ERROR_MASK) && fault_31865) { - max6675_errors[hindex]++; - if (max6675_errors[hindex] > THERMOCOUPLE_MAX_ERRORS) { + if (DISABLED(IGNORE_THERMOCOUPLE_ERRORS) && (max_tc_temp & MAX_TC_ERROR_MASK) && fault_31865) { + max_tc_errors[hindex]++; + if (max_tc_errors[hindex] > THERMOCOUPLE_MAX_ERRORS) { SERIAL_ERROR_START(); SERIAL_ECHOPGM("Temp measurement error! "); - #if MAX6675_ERROR_MASK == 7 + #if MAX_TC_ERROR_MASK == 7 SERIAL_ECHOPGM("MAX31855 "); - if (max6675_temp & 1) + if (max_tc_temp & 1) SERIAL_ECHOLNPGM("Open Circuit"); - else if (max6675_temp & 2) + else if (max_tc_temp & 2) SERIAL_ECHOLNPGM("Short to GND"); - else if (max6675_temp & 4) + else if (max_tc_temp & 4) SERIAL_ECHOLNPGM("Short to VCC"); - #elif HAS_MAX31865 + #elif HAS_MAX31865_TEMP if (fault_31865) { maxref.clearFault(); SERIAL_ECHOPAIR("MAX31865 Fault :(", fault_31865, ") >>"); @@ -2341,43 +2346,43 @@ void Temperature::disable_all_heaters() { #endif // Thermocouple open - max6675_temp = 4 * MAX6675_SEL(HEATER_0_MAX6675_TMAX, HEATER_1_MAX6675_TMAX); + max_tc_temp = 4 * THERMO_SEL(TEMP_SENSOR_0_MAX_TC_TMAX, TEMP_SENSOR_1_MAX_TC_TMAX); } else - max6675_temp >>= MAX6675_DISCARD_BITS; + max_tc_temp >>= MAX_TC_DISCARD_BITS; } else { - max6675_temp >>= MAX6675_DISCARD_BITS; - max6675_errors[hindex] = 0; + max_tc_temp >>= MAX_TC_DISCARD_BITS; + max_tc_errors[hindex] = 0; } - #if MAX6675_0_IS_MAX31855 || MAX6675_1_IS_MAX31855 - if (max6675_temp & 0x00002000) max6675_temp |= 0xFFFFC000; // Support negative temperature + #if HAS_MAX31855 + if (max_tc_temp & 0x00002000) max_tc_temp |= 0xFFFFC000; // Support negative temperature #endif // Return the RTD resistance for MAX31865 for display in SHOW_TEMP_ADC_VALUES - TERN_(HAS_MAX31865, max6675_temp = max31865_ohms); + TERN_(HAS_MAX31865_TEMP, max_tc_temp = max31865_ohms); - MAX6675_TEMP(hindex) = max6675_temp; + THERMO_TEMP(hindex) = max_tc_temp; - return int(max6675_temp); + return int(max_tc_temp); } -#endif // HAS_MAX6675 +#endif // HAS_MAX_TC /** * Update raw temperatures */ void Temperature::update_raw_temperatures() { - #if HAS_TEMP_ADC_0 && !HEATER_0_USES_MAX6675 + #if HAS_TEMP_ADC_0 && !TEMP_SENSOR_0_IS_MAX_TC temp_hotend[0].update(); #endif #if HAS_TEMP_ADC_1 #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) redundant_temperature_raw = temp_hotend[1].acc; - #elif !HEATER_1_USES_MAX6675 + #elif !TEMP_SENSOR_1_IS_MAX_TC temp_hotend[1].update(); #endif #endif @@ -2423,9 +2428,9 @@ void Temperature::readings_ready() { #if HAS_HOTEND static constexpr int8_t temp_dir[] = { - TERN(HEATER_0_USES_MAX6675, 0, TEMPDIR(0)) + TERN(TEMP_SENSOR_0_IS_MAX_TC, 0, TEMPDIR(0)) #if HAS_MULTI_HOTEND - , TERN(HEATER_1_USES_MAX6675, 0, TEMPDIR(1)) + , TERN(TEMP_SENSOR_1_IS_MAX_TC, 0, TEMPDIR(1)) #if HOTENDS > 2 #define _TEMPDIR(N) , TEMPDIR(N) REPEAT_S(2, HOTENDS, _TEMPDIR) diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index 002e1cbf7..75da23287 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -257,31 +257,31 @@ typedef struct { int16_t raw_min, raw_max, mintemp, maxtemp; } temp_range_t; #if HAS_USER_THERMISTORS enum CustomThermistorIndex : uint8_t { - #if HEATER_0_USER_THERMISTOR + #if TEMP_SENSOR_0_IS_CUSTOM CTI_HOTEND_0, #endif - #if HEATER_1_USER_THERMISTOR + #if TEMP_SENSOR_1_IS_CUSTOM CTI_HOTEND_1, #endif - #if HEATER_2_USER_THERMISTOR + #if TEMP_SENSOR_2_IS_CUSTOM CTI_HOTEND_2, #endif - #if HEATER_3_USER_THERMISTOR + #if TEMP_SENSOR_3_IS_CUSTOM CTI_HOTEND_3, #endif - #if HEATER_4_USER_THERMISTOR + #if TEMP_SENSOR_4_IS_CUSTOM CTI_HOTEND_4, #endif - #if HEATER_5_USER_THERMISTOR + #if TEMP_SENSOR_5_IS_CUSTOM CTI_HOTEND_5, #endif - #if HEATER_BED_USER_THERMISTOR + #if TEMP_SENSOR_BED_IS_CUSTOM CTI_BED, #endif - #if HEATER_PROBE_USER_THERMISTOR + #if TEMP_SENSOR_PROBE_IS_CUSTOM CTI_PROBE, #endif - #if HEATER_CHAMBER_USER_THERMISTOR + #if TEMP_SENSOR_CHAMBER_IS_CUSTOM CTI_CHAMBER, #endif USER_THERMISTORS @@ -813,16 +813,15 @@ class Temperature { static void update_raw_temperatures(); static void updateTemperaturesFromRawValues(); - #define HAS_MAX6675 EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) - #if HAS_MAX6675 - #define COUNT_6675 1 + BOTH(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) - #if COUNT_6675 > 1 - #define HAS_MULTI_6675 1 - #define READ_MAX6675(N) read_max6675(N) + #if HAS_MAX_TC + #define MAX_TC_COUNT 1 + BOTH(TEMP_SENSOR_0_IS_MAX_TC, TEMP_SENSOR_1_IS_MAX_TC) + #if MAX_TC_COUNT > 1 + #define HAS_MULTI_MAX_TC 1 + #define READ_MAX_TC(N) read_max_tc(N) #else - #define READ_MAX6675(N) read_max6675() + #define READ_MAX_TC(N) read_max_tc() #endif - static int read_max6675(TERN_(HAS_MULTI_6675, const uint8_t hindex=0)); + static int read_max_tc(TERN_(HAS_MULTI_MAX_TC, const uint8_t hindex=0)); #endif static void checkExtruderAutoFans(); diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h index 03ed5c2a5..77fc50c8d 100644 --- a/Marlin/src/module/thermistor/thermistors.h +++ b/Marlin/src/module/thermistor/thermistors.h @@ -42,7 +42,7 @@ #define OV_SCALE(N) (N) #define OV(N) int16_t(OV_SCALE(N) * (OVERSAMPLENR) * (THERMISTOR_TABLE_SCALE)) -#define ANY_THERMISTOR_IS(n) (THERMISTOR_HEATER_0 == n || THERMISTOR_HEATER_1 == n || THERMISTOR_HEATER_2 == n || THERMISTOR_HEATER_3 == n || THERMISTOR_HEATER_4 == n || THERMISTOR_HEATER_5 == n || THERMISTOR_HEATER_6 == n || THERMISTOR_HEATER_7 == n || THERMISTORBED == n || THERMISTORCHAMBER == n || THERMISTORPROBE == n) +#define ANY_THERMISTOR_IS(n) (TEMP_SENSOR_0_THERMISTOR_ID == n || TEMP_SENSOR_1_THERMISTOR_ID == n || TEMP_SENSOR_2_THERMISTOR_ID == n || TEMP_SENSOR_3_THERMISTOR_ID == n || TEMP_SENSOR_4_THERMISTOR_ID == n || TEMP_SENSOR_5_THERMISTOR_ID == n || TEMP_SENSOR_6_THERMISTOR_ID == n || TEMP_SENSOR_7_THERMISTOR_ID == n || TEMP_SENSOR_BED_THERMISTOR_ID == n || TEMP_SENSOR_CHAMBER_THERMISTOR_ID == n || TEMP_SENSOR_PROBE_THERMISTOR_ID == n) typedef struct { int16_t value, celsius; } temp_entry_t; @@ -205,121 +205,121 @@ typedef struct { int16_t value, celsius; } temp_entry_t; #define TT_NAME(_N) _TT_NAME(_N) -#if THERMISTOR_HEATER_0 - #define HEATER_0_TEMPTABLE TT_NAME(THERMISTOR_HEATER_0) - #define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE) -#elif HEATER_0_USES_THERMISTOR +#if TEMP_SENSOR_0_THERMISTOR_ID + #define TEMPTABLE_0 TT_NAME(TEMP_SENSOR_0_THERMISTOR_ID) + #define TEMPTABLE_0_LEN COUNT(TEMPTABLE_0) +#elif TEMP_SENSOR_0_IS_THERMISTOR #error "No heater 0 thermistor table specified" #else - #define HEATER_0_TEMPTABLE nullptr - #define HEATER_0_TEMPTABLE_LEN 0 + #define TEMPTABLE_0 nullptr + #define TEMPTABLE_0_LEN 0 #endif -#if THERMISTOR_HEATER_1 - #define HEATER_1_TEMPTABLE TT_NAME(THERMISTOR_HEATER_1) - #define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE) -#elif HEATER_1_USES_THERMISTOR +#if TEMP_SENSOR_1_THERMISTOR_ID + #define TEMPTABLE_1 TT_NAME(TEMP_SENSOR_1_THERMISTOR_ID) + #define TEMPTABLE_1_LEN COUNT(TEMPTABLE_1) +#elif TEMP_SENSOR_1_IS_THERMISTOR #error "No heater 1 thermistor table specified" #else - #define HEATER_1_TEMPTABLE nullptr - #define HEATER_1_TEMPTABLE_LEN 0 + #define TEMPTABLE_1 nullptr + #define TEMPTABLE_1_LEN 0 #endif -#if THERMISTOR_HEATER_2 - #define HEATER_2_TEMPTABLE TT_NAME(THERMISTOR_HEATER_2) - #define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE) -#elif HEATER_2_USES_THERMISTOR +#if TEMP_SENSOR_2_THERMISTOR_ID + #define TEMPTABLE_2 TT_NAME(TEMP_SENSOR_2_THERMISTOR_ID) + #define TEMPTABLE_2_LEN COUNT(TEMPTABLE_2) +#elif TEMP_SENSOR_2_IS_THERMISTOR #error "No heater 2 thermistor table specified" #else - #define HEATER_2_TEMPTABLE nullptr - #define HEATER_2_TEMPTABLE_LEN 0 + #define TEMPTABLE_2 nullptr + #define TEMPTABLE_2_LEN 0 #endif -#if THERMISTOR_HEATER_3 - #define HEATER_3_TEMPTABLE TT_NAME(THERMISTOR_HEATER_3) - #define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE) -#elif HEATER_3_USES_THERMISTOR +#if TEMP_SENSOR_3_THERMISTOR_ID + #define TEMPTABLE_3 TT_NAME(TEMP_SENSOR_3_THERMISTOR_ID) + #define TEMPTABLE_3_LEN COUNT(TEMPTABLE_3) +#elif TEMP_SENSOR_3_IS_THERMISTOR #error "No heater 3 thermistor table specified" #else - #define HEATER_3_TEMPTABLE nullptr - #define HEATER_3_TEMPTABLE_LEN 0 + #define TEMPTABLE_3 nullptr + #define TEMPTABLE_3_LEN 0 #endif -#if THERMISTOR_HEATER_4 - #define HEATER_4_TEMPTABLE TT_NAME(THERMISTOR_HEATER_4) - #define HEATER_4_TEMPTABLE_LEN COUNT(HEATER_4_TEMPTABLE) -#elif HEATER_4_USES_THERMISTOR +#if TEMP_SENSOR_4_THERMISTOR_ID + #define TEMPTABLE_4 TT_NAME(TEMP_SENSOR_4_THERMISTOR_ID) + #define TEMPTABLE_4_LEN COUNT(TEMPTABLE_4) +#elif TEMP_SENSOR_4_IS_THERMISTOR #error "No heater 4 thermistor table specified" #else - #define HEATER_4_TEMPTABLE nullptr - #define HEATER_4_TEMPTABLE_LEN 0 + #define TEMPTABLE_4 nullptr + #define TEMPTABLE_4_LEN 0 #endif -#if THERMISTOR_HEATER_5 - #define HEATER_5_TEMPTABLE TT_NAME(THERMISTOR_HEATER_5) - #define HEATER_5_TEMPTABLE_LEN COUNT(HEATER_5_TEMPTABLE) -#elif HEATER_5_USES_THERMISTOR +#if TEMP_SENSOR_5_THERMISTOR_ID + #define TEMPTABLE_5 TT_NAME(TEMP_SENSOR_5_THERMISTOR_ID) + #define TEMPTABLE_5_LEN COUNT(TEMPTABLE_5) +#elif TEMP_SENSOR_5_IS_THERMISTOR #error "No heater 5 thermistor table specified" #else - #define HEATER_5_TEMPTABLE nullptr - #define HEATER_5_TEMPTABLE_LEN 0 + #define TEMPTABLE_5 nullptr + #define TEMPTABLE_5_LEN 0 #endif -#if THERMISTOR_HEATER_6 - #define HEATER_6_TEMPTABLE TT_NAME(THERMISTOR_HEATER_6) - #define HEATER_6_TEMPTABLE_LEN COUNT(HEATER_6_TEMPTABLE) -#elif HEATER_6_USES_THERMISTOR +#if TEMP_SENSOR_6_THERMISTOR_ID + #define TEMPTABLE_6 TT_NAME(TEMP_SENSOR_6_THERMISTOR_ID) + #define TEMPTABLE_6_LEN COUNT(TEMPTABLE_6) +#elif TEMP_SENSOR_6_IS_THERMISTOR #error "No heater 6 thermistor table specified" #else - #define HEATER_6_TEMPTABLE nullptr - #define HEATER_6_TEMPTABLE_LEN 0 + #define TEMPTABLE_6 nullptr + #define TEMPTABLE_6_LEN 0 #endif -#if THERMISTOR_HEATER_7 - #define HEATER_7_TEMPTABLE TT_NAME(THERMISTOR_HEATER_7) - #define HEATER_7_TEMPTABLE_LEN COUNT(HEATER_7_TEMPTABLE) -#elif HEATER_7_USES_THERMISTOR +#if TEMP_SENSOR_7_THERMISTOR_ID + #define TEMPTABLE_7 TT_NAME(TEMP_SENSOR_7_THERMISTOR_ID) + #define TEMPTABLE_7_LEN COUNT(TEMPTABLE_7) +#elif TEMP_SENSOR_7_IS_THERMISTOR #error "No heater 7 thermistor table specified" #else - #define HEATER_7_TEMPTABLE nullptr - #define HEATER_7_TEMPTABLE_LEN 0 + #define TEMPTABLE_7 nullptr + #define TEMPTABLE_7_LEN 0 #endif -#ifdef THERMISTORBED - #define BED_TEMPTABLE TT_NAME(THERMISTORBED) - #define BED_TEMPTABLE_LEN COUNT(BED_TEMPTABLE) -#elif HEATER_BED_USES_THERMISTOR +#ifdef TEMP_SENSOR_BED_THERMISTOR_ID + #define TEMPTABLE_BED TT_NAME(TEMP_SENSOR_BED_THERMISTOR_ID) + #define TEMPTABLE_BED_LEN COUNT(TEMPTABLE_BED) +#elif TEMP_SENSOR_BED_IS_THERMISTOR #error "No bed thermistor table specified" #else - #define BED_TEMPTABLE_LEN 0 + #define TEMPTABLE_BED_LEN 0 #endif -#ifdef THERMISTORCHAMBER - #define CHAMBER_TEMPTABLE TT_NAME(THERMISTORCHAMBER) - #define CHAMBER_TEMPTABLE_LEN COUNT(CHAMBER_TEMPTABLE) -#elif HEATER_CHAMBER_USES_THERMISTOR +#ifdef TEMP_SENSOR_CHAMBER_THERMISTOR_ID + #define TEMPTABLE_CHAMBER TT_NAME(TEMP_SENSOR_CHAMBER_THERMISTOR_ID) + #define TEMPTABLE_CHAMBER_LEN COUNT(TEMPTABLE_CHAMBER) +#elif TEMP_SENSOR_CHAMBER_IS_THERMISTOR #error "No chamber thermistor table specified" #else - #define CHAMBER_TEMPTABLE_LEN 0 + #define TEMPTABLE_CHAMBER_LEN 0 #endif -#ifdef THERMISTORPROBE - #define PROBE_TEMPTABLE TT_NAME(THERMISTORPROBE) - #define PROBE_TEMPTABLE_LEN COUNT(PROBE_TEMPTABLE) -#elif HEATER_PROBE_USES_THERMISTOR +#ifdef TEMP_SENSOR_PROBE_THERMISTOR_ID + #define TEMPTABLE_PROBE TT_NAME(TEMP_SENSOR_PROBE_THERMISTOR_ID) + #define TEMPTABLE_PROBE_LEN COUNT(TEMPTABLE_PROBE) +#elif TEMP_SENSOR_PROBE_IS_THERMISTOR #error "No probe thermistor table specified" #else - #define PROBE_TEMPTABLE_LEN 0 + #define TEMPTABLE_PROBE_LEN 0 #endif // The SCAN_THERMISTOR_TABLE macro needs alteration? static_assert( - HEATER_0_TEMPTABLE_LEN < 256 && HEATER_1_TEMPTABLE_LEN < 256 - && HEATER_2_TEMPTABLE_LEN < 256 && HEATER_3_TEMPTABLE_LEN < 256 - && HEATER_4_TEMPTABLE_LEN < 256 && HEATER_5_TEMPTABLE_LEN < 256 - && HEATER_6_TEMPTABLE_LEN < 256 && HEATER_7_TEMPTABLE_LEN < 256 - && BED_TEMPTABLE_LEN < 256 && CHAMBER_TEMPTABLE_LEN < 256 - && PROBE_TEMPTABLE_LEN < 256, + TEMPTABLE_0_LEN < 256 && TEMPTABLE_1_LEN < 256 + && TEMPTABLE_2_LEN < 256 && TEMPTABLE_3_LEN < 256 + && TEMPTABLE_4_LEN < 256 && TEMPTABLE_5_LEN < 256 + && TEMPTABLE_6_LEN < 256 && TEMPTABLE_7_LEN < 256 + && TEMPTABLE_BED_LEN < 256 && TEMPTABLE_CHAMBER_LEN < 256 + && TEMPTABLE_PROBE_LEN < 256, "Temperature conversion tables over 255 entries need special consideration." ); @@ -327,181 +327,185 @@ static_assert( // For thermistors the highest temperature results in the lowest ADC value // For thermocouples the highest temperature results in the highest ADC value -#define _TT_REV(N) REVERSE_TEMP_SENSOR_RANGE_##N -#define TT_REV(N) _TT_REV(N) +#define _TT_REV(N) REVERSE_TEMP_SENSOR_RANGE_##N +#define TT_REV(N) _TT_REV(TEMP_SENSOR_##N##_THERMISTOR_ID) +#define _TT_REVRAW(N) !TEMP_SENSOR_##N##_IS_THERMISTOR +#define TT_REVRAW(N) (TT_REV(N) || _TT_REVRAW(N)) -#ifdef HEATER_0_TEMPTABLE - #if TT_REV(THERMISTOR_HEATER_0) - #define HEATER_0_SENSOR_MINTEMP_IND 0 - #define HEATER_0_SENSOR_MAXTEMP_IND HEATER_0_TEMPTABLE_LEN - 1 +#ifdef TEMPTABLE_0 + #if TT_REV(0) + #define TEMP_SENSOR_0_MINTEMP_IND 0 + #define TEMPTABLE_0_MAXTEMP_IND HEATER_0_LEN - 1 #else - #define HEATER_0_SENSOR_MINTEMP_IND HEATER_0_TEMPTABLE_LEN - 1 - #define HEATER_0_SENSOR_MAXTEMP_IND 0 + #define TEMPTABLE_0_MINTEMP_IND HEATER_0_LEN - 1 + #define TEMP_SENSOR_0_MAXTEMP_IND 0 #endif #endif -#ifdef HEATER_1_TEMPTABLE - #if TT_REV(THERMISTOR_HEATER_1) - #define HEATER_1_SENSOR_MINTEMP_IND 0 - #define HEATER_1_SENSOR_MAXTEMP_IND HEATER_1_TEMPTABLE_LEN - 1 +#ifdef TEMPTABLE_1 + #if TT_REV(1) + #define TEMP_SENSOR_1_MINTEMP_IND 0 + #define TEMPTABLE_1_MAXTEMP_IND HEATER_1_LEN - 1 #else - #define HEATER_1_SENSOR_MINTEMP_IND HEATER_1_TEMPTABLE_LEN - 1 - #define HEATER_1_SENSOR_MAXTEMP_IND 0 + #define TEMPTABLE_1_MINTEMP_IND HEATER_1_LEN - 1 + #define TEMP_SENSOR_1_MAXTEMP_IND 0 #endif #endif -#ifdef HEATER_2_TEMPTABLE - #if TT_REV(THERMISTOR_HEATER_2) - #define HEATER_2_SENSOR_MINTEMP_IND 0 - #define HEATER_2_SENSOR_MAXTEMP_IND HEATER_2_TEMPTABLE_LEN - 1 +#ifdef TEMPTABLE_2 + #if TT_REV(2) + #define TEMP_SENSOR_2_MINTEMP_IND 0 + #define TEMPTABLE_2_MAXTEMP_IND HEATER_2_LEN - 1 #else - #define HEATER_2_SENSOR_MINTEMP_IND HEATER_2_TEMPTABLE_LEN - 1 - #define HEATER_2_SENSOR_MAXTEMP_IND 0 + #define TEMPTABLE_2_MINTEMP_IND HEATER_2_LEN - 1 + #define TEMP_SENSOR_2_MAXTEMP_IND 0 #endif #endif -#ifdef HEATER_3_TEMPTABLE - #if TT_REV(THERMISTOR_HEATER_3) - #define HEATER_3_SENSOR_MINTEMP_IND 0 - #define HEATER_3_SENSOR_MAXTEMP_IND HEATER_3_TEMPTABLE_LEN - 1 +#ifdef TEMPTABLE_3 + #if TT_REV(3) + #define TEMP_SENSOR_3_MINTEMP_IND 0 + #define TEMPTABLE_3_MAXTEMP_IND HEATER_3_LEN - 1 #else - #define HEATER_3_SENSOR_MINTEMP_IND HEATER_3_TEMPTABLE_LEN - 1 - #define HEATER_3_SENSOR_MAXTEMP_IND 0 + #define TEMPTABLE_3_MINTEMP_IND HEATER_3_LEN - 1 + #define TEMP_SENSOR_3_MAXTEMP_IND 0 #endif #endif -#ifdef HEATER_4_TEMPTABLE - #if TT_REV(THERMISTOR_HEATER_4) - #define HEATER_4_SENSOR_MINTEMP_IND 0 - #define HEATER_4_SENSOR_MAXTEMP_IND HEATER_4_TEMPTABLE_LEN - 1 +#ifdef TEMPTABLE_4 + #if TT_REV(4) + #define TEMP_SENSOR_4_MINTEMP_IND 0 + #define TEMPTABLE_4_MAXTEMP_IND HEATER_4_LEN - 1 #else - #define HEATER_4_SENSOR_MINTEMP_IND HEATER_4_TEMPTABLE_LEN - 1 - #define HEATER_4_SENSOR_MAXTEMP_IND 0 + #define TEMPTABLE_4_MINTEMP_IND HEATER_4_LEN - 1 + #define TEMP_SENSOR_4_MAXTEMP_IND 0 #endif #endif -#ifdef HEATER_5_TEMPTABLE - #if TT_REV(THERMISTOR_HEATER_5) - #define HEATER_5_SENSOR_MINTEMP_IND 0 - #define HEATER_5_SENSOR_MAXTEMP_IND HEATER_5_TEMPTABLE_LEN - 1 +#ifdef TEMPTABLE_5 + #if TT_REV(5) + #define TEMP_SENSOR_5_MINTEMP_IND 0 + #define TEMPTABLE_5_MAXTEMP_IND HEATER_5_LEN - 1 #else - #define HEATER_5_SENSOR_MINTEMP_IND HEATER_5_TEMPTABLE_LEN - 1 - #define HEATER_5_SENSOR_MAXTEMP_IND 0 + #define TEMPTABLE_5_MINTEMP_IND HEATER_5_LEN - 1 + #define TEMP_SENSOR_5_MAXTEMP_IND 0 #endif #endif -#ifdef HEATER_6_TEMPTABLE - #if TT_REV(THERMISTOR_HEATER_6) - #define HEATER_6_SENSOR_MINTEMP_IND 0 - #define HEATER_6_SENSOR_MAXTEMP_IND HEATER_6_TEMPTABLE_LEN - 1 +#ifdef TEMPTABLE_6 + #if TT_REV(6) + #define TEMP_SENSOR_6_MINTEMP_IND 0 + #define TEMPTABLE_6_MAXTEMP_IND HEATER_6_LEN - 1 #else - #define HEATER_6_SENSOR_MINTEMP_IND HEATER_6_TEMPTABLE_LEN - 1 - #define HEATER_6_SENSOR_MAXTEMP_IND 0 + #define TEMPTABLE_6_MINTEMP_IND HEATER_6_LEN - 1 + #define TEMP_SENSOR_6_MAXTEMP_IND 0 #endif #endif -#ifdef HEATER_7_TEMPTABLE - #if TT_REV(THERMISTOR_HEATER_7) - #define HEATER_7_SENSOR_MINTEMP_IND 0 - #define HEATER_7_SENSOR_MAXTEMP_IND HEATER_7_TEMPTABLE_LEN - 1 +#ifdef TEMPTABLE_7 + #if TT_REV(7) + #define TEMP_SENSOR_7_MINTEMP_IND 0 + #define TEMPTABLE_7_MAXTEMP_IND HEATER_7_LEN - 1 #else - #define HEATER_7_SENSOR_MINTEMP_IND HEATER_7_TEMPTABLE_LEN - 1 - #define HEATER_7_SENSOR_MAXTEMP_IND 0 + #define TEMPTABLE_7_MINTEMP_IND HEATER_7_LEN - 1 + #define TEMP_SENSOR_7_MAXTEMP_IND 0 #endif #endif -#ifndef HEATER_0_RAW_HI_TEMP - #if TT_REV(THERMISTOR_HEATER_0) || !HEATER_0_USES_THERMISTOR - #define HEATER_0_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE - #define HEATER_0_RAW_LO_TEMP 0 +#ifndef TEMP_SENSOR_0_RAW_HI_TEMP + #if TT_REVRAW(0) + #define TEMP_SENSOR_0_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_0_RAW_LO_TEMP 0 #else - #define HEATER_0_RAW_HI_TEMP 0 - #define HEATER_0_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_0_RAW_HI_TEMP 0 + #define TEMP_SENSOR_0_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif -#ifndef HEATER_1_RAW_HI_TEMP - #if TT_REV(THERMISTOR_HEATER_1) || !HEATER_1_USES_THERMISTOR - #define HEATER_1_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE - #define HEATER_1_RAW_LO_TEMP 0 +#ifndef TEMP_SENSOR_1_RAW_HI_TEMP + #if TT_REVRAW(1) + #define TEMP_SENSOR_1_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_1_RAW_LO_TEMP 0 #else - #define HEATER_1_RAW_HI_TEMP 0 - #define HEATER_1_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_1_RAW_HI_TEMP 0 + #define TEMP_SENSOR_1_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif -#ifndef HEATER_2_RAW_HI_TEMP - #if TT_REV(THERMISTOR_HEATER_2) || !HEATER_2_USES_THERMISTOR - #define HEATER_2_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE - #define HEATER_2_RAW_LO_TEMP 0 +#ifndef TEMP_SENSOR_2_RAW_HI_TEMP + #if TT_REVRAW(2) + #define TEMP_SENSOR_2_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_2_RAW_LO_TEMP 0 #else - #define HEATER_2_RAW_HI_TEMP 0 - #define HEATER_2_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_2_RAW_HI_TEMP 0 + #define TEMP_SENSOR_2_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif -#ifndef HEATER_3_RAW_HI_TEMP - #if TT_REV(THERMISTOR_HEATER_3) || !HEATER_3_USES_THERMISTOR - #define HEATER_3_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE - #define HEATER_3_RAW_LO_TEMP 0 +#ifndef TEMP_SENSOR_3_RAW_HI_TEMP + #if TT_REVRAW(3) + #define TEMP_SENSOR_3_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_3_RAW_LO_TEMP 0 #else - #define HEATER_3_RAW_HI_TEMP 0 - #define HEATER_3_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_3_RAW_HI_TEMP 0 + #define TEMP_SENSOR_3_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif -#ifndef HEATER_4_RAW_HI_TEMP - #if TT_REV(THERMISTOR_HEATER_4) || !HEATER_4_USES_THERMISTOR - #define HEATER_4_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE - #define HEATER_4_RAW_LO_TEMP 0 +#ifndef TEMP_SENSOR_4_RAW_HI_TEMP + #if TT_REVRAW(4) + #define TEMP_SENSOR_4_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_4_RAW_LO_TEMP 0 #else - #define HEATER_4_RAW_HI_TEMP 0 - #define HEATER_4_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_4_RAW_HI_TEMP 0 + #define TEMP_SENSOR_4_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif -#ifndef HEATER_5_RAW_HI_TEMP - #if TT_REV(THERMISTOR_HEATER_5) || !HEATER_5_USES_THERMISTOR - #define HEATER_5_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE - #define HEATER_5_RAW_LO_TEMP 0 +#ifndef TEMP_SENSOR_5_RAW_HI_TEMP + #if TT_REVRAW(5) + #define TEMP_SENSOR_5_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_5_RAW_LO_TEMP 0 #else - #define HEATER_5_RAW_HI_TEMP 0 - #define HEATER_5_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_5_RAW_HI_TEMP 0 + #define TEMP_SENSOR_5_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif -#ifndef HEATER_6_RAW_HI_TEMP - #if TT_REV(THERMISTOR_HEATER_6) || !HEATER_6_USES_THERMISTOR - #define HEATER_6_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE - #define HEATER_6_RAW_LO_TEMP 0 +#ifndef TEMP_SENSOR_6_RAW_HI_TEMP + #if TT_REVRAW(6) + #define TEMP_SENSOR_6_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_6_RAW_LO_TEMP 0 #else - #define HEATER_6_RAW_HI_TEMP 0 - #define HEATER_6_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_6_RAW_HI_TEMP 0 + #define TEMP_SENSOR_6_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif -#ifndef HEATER_7_RAW_HI_TEMP - #if TT_REV(THERMISTOR_HEATER_7) || !HEATER_7_USES_THERMISTOR - #define HEATER_7_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE - #define HEATER_7_RAW_LO_TEMP 0 +#ifndef TEMP_SENSOR_7_RAW_HI_TEMP + #if TT_REVRAW(7) + #define TEMP_SENSOR_7_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_7_RAW_LO_TEMP 0 #else - #define HEATER_7_RAW_HI_TEMP 0 - #define HEATER_7_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_7_RAW_HI_TEMP 0 + #define TEMP_SENSOR_7_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif -#ifndef HEATER_BED_RAW_HI_TEMP - #if TT_REV(THERMISTORBED) || !HEATER_BED_USES_THERMISTOR - #define HEATER_BED_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE - #define HEATER_BED_RAW_LO_TEMP 0 +#ifndef TEMP_SENSOR_BED_RAW_HI_TEMP + #if TT_REVRAW(BED) + #define TEMP_SENSOR_BED_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_BED_RAW_LO_TEMP 0 #else - #define HEATER_BED_RAW_HI_TEMP 0 - #define HEATER_BED_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_BED_RAW_HI_TEMP 0 + #define TEMP_SENSOR_BED_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif -#ifndef HEATER_CHAMBER_RAW_HI_TEMP - #if TT_REV(THERMISTORCHAMBER) || !HEATER_CHAMBER_USES_THERMISTOR - #define HEATER_CHAMBER_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE - #define HEATER_CHAMBER_RAW_LO_TEMP 0 +#ifndef TEMP_SENSOR_CHAMBER_RAW_HI_TEMP + #if TT_REVRAW(CHAMBER) + #define TEMP_SENSOR_CHAMBER_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_CHAMBER_RAW_LO_TEMP 0 #else - #define HEATER_CHAMBER_RAW_HI_TEMP 0 - #define HEATER_CHAMBER_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_CHAMBER_RAW_HI_TEMP 0 + #define TEMP_SENSOR_CHAMBER_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif -#ifndef HEATER_PROBE_RAW_HI_TEMP - #if TT_REV(THERMISTORPROBE) || !HEATER_PROBE_USES_THERMISTOR - #define HEATER_PROBE_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE - #define HEATER_PROBE_RAW_LO_TEMP 0 +#ifndef TEMP_SENSOR_PROBE_RAW_HI_TEMP + #if TT_REVRAW(PROBE) + #define TEMP_SENSOR_PROBE_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_PROBE_RAW_LO_TEMP 0 #else - #define HEATER_PROBE_RAW_HI_TEMP 0 - #define HEATER_PROBE_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_PROBE_RAW_HI_TEMP 0 + #define TEMP_SENSOR_PROBE_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif #undef _TT_REV #undef TT_REV +#undef _TT_REVRAW +#undef TT_REVRAW diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h index 54153beb1..549b578f4 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h @@ -135,7 +135,7 @@ #define Y_STEP_PIN PE11 #define Y_DIR_PIN PE8 #define Y_ENABLE_PIN PD7 - #ifndef Y_CS_PIN +#ifndef Y_CS_PIN #define Y_CS_PIN PB8 #endif diff --git a/platformio.ini b/platformio.ini index 6008b943e..9239ace72 100644 --- a/platformio.ini +++ b/platformio.ini @@ -235,7 +235,7 @@ HAS_L64XX = Arduino-L6470@0.8.0 src_filter=+ + + + NEOPIXEL_LED = Adafruit NeoPixel@1.5.0 src_filter=+ -MAX6675_._IS_MAX31865 = Adafruit MAX31865 library@~1.1.0 +TEMP_.+_IS_MAX31865 = Adafruit MAX31865 library@~1.1.0 USES_LIQUIDCRYSTAL = bitbucket-fmalpartida/LiquidCrystal@1.5.0 USES_LIQUIDCRYSTAL_I2C = marcoschwartz/LiquidCrystal_I2C@1.1.4 USES_LIQUIDTWI2 = LiquidTWI2@1.2.7