From 5bc480fee8d7c3b4842bd861309cefe30b6896f2 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 11 Sep 2015 00:37:32 -0700 Subject: [PATCH 1/3] Fix Move E menu items --- Marlin/ultralcd.cpp | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 1af2072f3..b466cfc51 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -809,9 +809,9 @@ static void lcd_move_x() { _lcd_move(PSTR(MSG_MOVE_X), X_AXIS, X_MIN_POS, X_MAX_ static void lcd_move_y() { _lcd_move(PSTR(MSG_MOVE_Y), Y_AXIS, Y_MIN_POS, Y_MAX_POS); } static void lcd_move_z() { _lcd_move(PSTR(MSG_MOVE_Z), Z_AXIS, Z_MIN_POS, Z_MAX_POS); } static void lcd_move_e( -#if EXTRUDERS > 1 - uint8_t e = 0 -#endif + #if EXTRUDERS > 1 + uint8_t e + #endif ) { #if EXTRUDERS > 1 unsigned short original_active_extruder = active_extruder; @@ -823,7 +823,24 @@ static void lcd_move_e( line_to_current(E_AXIS); lcdDrawUpdate = 1; } - if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_MOVE_E), ftostr31(current_position[E_AXIS])); + if (lcdDrawUpdate) { + PGM_P pos_label; + #if EXTRUDERS == 1 + pos_label = PSTR(MSG_MOVE_E); + #else + switch (e) { + case 0: pos_label = PSTR(MSG_MOVE_E0); break; + case 1: pos_label = PSTR(MSG_MOVE_E1); break; + #if EXTRUDERS > 2 + case 2: pos_label = PSTR(MSG_MOVE_E2); break; + #if EXTRUDERS > 3 + case 3: pos_label = PSTR(MSG_MOVE_E3); break; + #endif //EXTRUDERS > 3 + #endif //EXTRUDERS > 2 + } + #endif //EXTRUDERS > 1 + lcd_implementation_drawedit(pos_label, ftostr31(current_position[E_AXIS])); + } if (LCD_CLICKED) lcd_goto_menu(lcd_move_menu_axis); #if EXTRUDERS > 1 active_extruder = original_active_extruder; @@ -831,6 +848,7 @@ static void lcd_move_e( } #if EXTRUDERS > 1 + static void lcd_move_e0() { lcd_move_e(0); } static void lcd_move_e1() { lcd_move_e(1); } #if EXTRUDERS > 2 static void lcd_move_e2() { lcd_move_e(2); } @@ -853,8 +871,10 @@ static void lcd_move_menu_axis() { MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y); if (move_menu_scale < 10.0) { MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z); - MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e); - #if EXTRUDERS > 1 + #if EXTRUDERS == 1 + MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e); + #else + MENU_ITEM(submenu, MSG_MOVE_E0, lcd_move_e0); MENU_ITEM(submenu, MSG_MOVE_E1, lcd_move_e1); #if EXTRUDERS > 2 MENU_ITEM(submenu, MSG_MOVE_E2, lcd_move_e2); From 7ac7ddbf20bb18c7bd242447a8e60927d9a030bb Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 11 Sep 2015 19:52:01 -0700 Subject: [PATCH 2/3] Show nozzles, heaters, and extruders numbered 1-4 --- Marlin/language_an.h | 4 +- Marlin/language_bg.h | 4 +- Marlin/language_ca.h | 4 +- Marlin/language_cn.h | 17 +--- Marlin/language_cz.h | 22 +---- Marlin/language_da.h | 9 +- Marlin/language_de.h | 4 +- Marlin/language_en.h | 52 +++++------ Marlin/language_es.h | 4 +- Marlin/language_eu.h | 4 +- Marlin/language_fi.h | 4 +- Marlin/language_fr.h | 4 +- Marlin/language_it.h | 5 +- Marlin/language_kana.h | 5 +- Marlin/language_kana_utf8.h | 5 +- Marlin/language_nl.h | 4 +- Marlin/language_pl.h | 4 +- Marlin/language_pt-br.h | 4 +- Marlin/language_pt.h | 4 +- Marlin/language_ru.h | 4 +- Marlin/ultralcd.cpp | 166 ++++++++++++++++++------------------ 21 files changed, 128 insertions(+), 205 deletions(-) diff --git a/Marlin/language_an.h b/Marlin/language_an.h index 814abe27e..625bd1ab9 100644 --- a/Marlin/language_an.h +++ b/Marlin/language_an.h @@ -82,9 +82,7 @@ #define MSG_MOTION "Movimiento" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "Contrast" #define MSG_STORE_EPROM "Alzar Memoria" #define MSG_LOAD_EPROM "Cargar Memoria" diff --git a/Marlin/language_bg.h b/Marlin/language_bg.h index 78670c1f3..0afe34486 100644 --- a/Marlin/language_bg.h +++ b/Marlin/language_bg.h @@ -83,9 +83,7 @@ #define MSG_MOTION "Движение" #define MSG_VOLUMETRIC "Нишка" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Диам. нишка 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Диам. нишка 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Диам. нишка 3" +#define MSG_FILAMENT_DIAM "Диам. нишка" #define MSG_CONTRAST "LCD контраст" #define MSG_STORE_EPROM "Запази в EPROM" #define MSG_LOAD_EPROM "Зареди от EPROM" diff --git a/Marlin/language_ca.h b/Marlin/language_ca.h index a796b1e1e..dc69b5796 100644 --- a/Marlin/language_ca.h +++ b/Marlin/language_ca.h @@ -83,9 +83,7 @@ #define MSG_MOTION "Moviment" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "Contrast de LCD" #define MSG_STORE_EPROM "Desar a memoria" #define MSG_LOAD_EPROM "Carregar de mem." diff --git a/Marlin/language_cn.h b/Marlin/language_cn.h index 71565501e..5c5a94ce2 100644 --- a/Marlin/language_cn.h +++ b/Marlin/language_cn.h @@ -30,10 +30,6 @@ #define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " \xc5\xc6" #define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " \xbe\xc6" #define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " \xbe\xbf" - #define MSG_H1 "1" - #define MSG_H2 "2" - #define MSG_H3 "3" - #define MSG_H4 "4" #define MSG_COOLDOWN "\xc8\xc9" #define MSG_SWITCH_PS_ON "\xb9\xcb\xca\xb3" #define MSG_SWITCH_PS_OFF "\xb9\xcb\xb5\xb6" @@ -50,11 +46,6 @@ #define MSG_MOVE_10MM "\xc1\xb2 10mm" #define MSG_SPEED "\xd1\xd2" #define MSG_NOZZLE "\xd3\xd4" - #define MSG_N0 " 0" - #define MSG_N1 " 1" - #define MSG_N2 " 2" - #define MSG_N3 " 3" - #define MSG_N4 " 4" #define MSG_BED "\xc4\xc7" #define MSG_FAN_SPEED "\xd5\xd6\xd1\xd2" #define MSG_FLOW "\xcc\xad\xd1\xd2" @@ -69,9 +60,6 @@ #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" - #define MSG_E2 " E2" - #define MSG_E3 " E3" - #define MSG_E4 " E4" #define MSG_ACC "Accel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" @@ -94,10 +82,7 @@ #define MSG_MOTION "\xdf\xb2" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" - #define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" - #define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" - #define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" - #define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4" + #define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "Store memory" #define MSG_LOAD_EPROM "Load memory" diff --git a/Marlin/language_cz.h b/Marlin/language_cz.h index 870200795..f32ff0dcf 100644 --- a/Marlin/language_cz.h +++ b/Marlin/language_cz.h @@ -2,7 +2,7 @@ * Czech * * LCD Menu Messages - * Se also documentation/LCDLanguageFont.md + * See also documentation/LCDLanguageFont.md * * Translated by Petr Zahradnik, Computer Laboratory * Blog and video blog Zahradnik se bavi @@ -36,10 +36,6 @@ #define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Vse" #define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Podloz" #define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " Nast" -#define MSG_H1 "1" -#define MSG_H2 "2" -#define MSG_H3 "3" -#define MSG_H4 "4" #define MSG_COOLDOWN "Zchladit" #define MSG_SWITCH_PS_ON "Zapnout napajeni" #define MSG_SWITCH_PS_OFF "Vypnout napajeni" @@ -51,19 +47,11 @@ #define MSG_MOVE_Y "Posunout Y" #define MSG_MOVE_Z "Posunout Z" #define MSG_MOVE_E "Extruder" -#define MSG_MOVE_E1 "Extruder1" -#define MSG_MOVE_E2 "Extruder2" -#define MSG_MOVE_E3 "Extruder3" #define MSG_MOVE_01MM "Posunout o 0,1mm" #define MSG_MOVE_1MM "Posunout o 1mm" #define MSG_MOVE_10MM "Posunout o 10mm" #define MSG_SPEED "Rychlost" #define MSG_NOZZLE "Tryska" -#define MSG_N0 " 0" -#define MSG_N1 " 1" -#define MSG_N2 " 2" -#define MSG_N3 " 3" -#define MSG_N4 " 4" #define MSG_BED "Podlozka" #define MSG_FAN_SPEED "Rychlost vent." #define MSG_FLOW "Prutok" @@ -78,9 +66,6 @@ #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" -#define MSG_E2 " E2" -#define MSG_E3 " E3" -#define MSG_E4 " E4" #define MSG_ACC "Zrychl" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" @@ -103,10 +88,7 @@ #define MSG_MOTION "Pohyb" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E na mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Prum. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Prum. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Prum. 3" -#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Prum. 4" +#define MSG_FILAMENT_DIAM "Fil. Prum." #define MSG_CONTRAST "Kontrast LCD" #define MSG_STORE_EPROM "Ulozit nastaveni" #define MSG_LOAD_EPROM "Nacist nastaveni" diff --git a/Marlin/language_da.h b/Marlin/language_da.h index 8f2688b6b..61f03e08d 100644 --- a/Marlin/language_da.h +++ b/Marlin/language_da.h @@ -42,8 +42,6 @@ #define MSG_MOVE_Y "Flyt Y" #define MSG_MOVE_Z "Flyt Z" #define MSG_MOVE_E "Extruder" -#define MSG_MOVE_E1 "Extruder2" -#define MSG_MOVE_E2 "Extruder3" #define MSG_MOVE_01MM "Flyt 0.1mm" #define MSG_MOVE_1MM "Flyt 1mm" #define MSG_MOVE_10MM "Flyt 10mm" @@ -54,9 +52,6 @@ #define MSG_BED "Plade" #define MSG_FAN_SPEED "Blæser hastighed" #define MSG_FLOW "Flow" -#define MSG_FLOW0 "Flow 0" -#define MSG_FLOW1 "Flow 1" -#define MSG_FLOW2 "Flow 2" #define MSG_CONTROL "Kontrol" #define MSG_MIN " \002 Min" #define MSG_MAX " \002 Max" @@ -89,9 +84,7 @@ #define MSG_MOTION "Motion" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "LCD kontrast" #define MSG_STORE_EPROM "Gem i EEPROM" #define MSG_LOAD_EPROM "Hent fra EEPROM" diff --git a/Marlin/language_de.h b/Marlin/language_de.h index 37bbaa96b..3049581ef 100644 --- a/Marlin/language_de.h +++ b/Marlin/language_de.h @@ -81,9 +81,7 @@ #define MSG_MOTION "Bewegung" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm³" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Filament D 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Filament D 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Filament D 3" +#define MSG_FILAMENT_DIAM "Filament D" #define MSG_CONTRAST "LCD Kontrast" #define MSG_STORE_EPROM "EPROM speichern" #define MSG_LOAD_EPROM "EPROM laden" diff --git a/Marlin/language_en.h b/Marlin/language_en.h index 60e46ba84..d035f8982 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -120,21 +120,18 @@ #ifndef MSG_MOVE_E #define MSG_MOVE_E "Extruder" #endif -#if EXTRUDERS > 1 - #ifndef MSG_MOVE_E1 - #define MSG_MOVE_E1 "Extruder1" - #endif - #if EXTRUDERS > 2 - #ifndef MSG_MOVE_E2 - #define MSG_MOVE_E2 "Extruder2" - #endif - #if EXTRUDERS > 3 - #ifndef MSG_MOVE_E3 - #define MSG_MOVE_E3 "Extruder3" - #endif - #endif - #endif // EXTRUDERS > 2 -#endif // EXTRUDERS > 1 +#ifndef MSG_MOVE_E1 +#define MSG_MOVE_E1 "1" +#endif +#ifndef MSG_MOVE_E2 +#define MSG_MOVE_E2 "2" +#endif +#ifndef MSG_MOVE_E3 +#define MSG_MOVE_E3 "3" +#endif +#ifndef MSG_MOVE_E4 +#define MSG_MOVE_E4 "4" +#endif #ifndef MSG_MOVE_01MM #define MSG_MOVE_01MM "Move 0.1mm" #endif @@ -150,9 +147,6 @@ #ifndef MSG_NOZZLE #define MSG_NOZZLE "Nozzle" #endif -#ifndef MSG_N0 -#define MSG_N0 " 0" -#endif #ifndef MSG_N1 #define MSG_N1 " 1" #endif @@ -207,6 +201,9 @@ #ifndef MSG_PID_C #define MSG_PID_C "PID-C" #endif +#ifndef MSG_E1 +#define MSG_E1 " E1" +#endif #ifndef MSG_E2 #define MSG_E2 " E2" #endif @@ -282,17 +279,20 @@ #ifndef MSG_VOLUMETRIC_ENABLED #define MSG_VOLUMETRIC_ENABLED "E in mm3" #endif -#ifndef MSG_FILAMENT_SIZE_EXTRUDER_0 -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" +#ifndef MSG_FILAMENT_DIAM +#define MSG_FILAMENT_DIAM "Fil. Dia." #endif -#ifndef MSG_FILAMENT_SIZE_EXTRUDER_1 -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" +#ifndef MSG_DIAM_E1 +#define MSG_DIAM_E1 " 1" #endif -#ifndef MSG_FILAMENT_SIZE_EXTRUDER_2 -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#ifndef MSG_DIAM_E2 +#define MSG_DIAM_E2 " 2" #endif -#ifndef MSG_FILAMENT_SIZE_EXTRUDER_3 -#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4" +#ifndef MSG_DIAM_E3 +#define MSG_DIAM_E3 " 3" +#endif +#ifndef MSG_DIAM_E4 +#define MSG_DIAM_E4 " 4" #endif #ifndef MSG_CONTRAST #define MSG_CONTRAST "LCD contrast" diff --git a/Marlin/language_es.h b/Marlin/language_es.h index 4dd0b5a7b..f04702435 100644 --- a/Marlin/language_es.h +++ b/Marlin/language_es.h @@ -82,9 +82,7 @@ #define MSG_MOTION "Movimiento" #define MSG_VOLUMETRIC "Filamento" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "Contraste" #define MSG_STORE_EPROM "Guardar memoria" #define MSG_LOAD_EPROM "Cargar memoria" diff --git a/Marlin/language_eu.h b/Marlin/language_eu.h index cfb6eeb8d..3298fef14 100644 --- a/Marlin/language_eu.h +++ b/Marlin/language_eu.h @@ -82,9 +82,7 @@ #define MSG_MOTION "Mugimendua" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "LCD kontrastea" #define MSG_STORE_EPROM "Gorde memoria" #define MSG_LOAD_EPROM "Kargatu memoria" diff --git a/Marlin/language_fi.h b/Marlin/language_fi.h index 837acf747..5815a97a3 100644 --- a/Marlin/language_fi.h +++ b/Marlin/language_fi.h @@ -82,9 +82,7 @@ #define MSG_MOTION "Liike" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm³" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "LCD kontrasti" #define MSG_STORE_EPROM "Tallenna muistiin" #define MSG_LOAD_EPROM "Lataa muistista" diff --git a/Marlin/language_fr.h b/Marlin/language_fr.h index 7e1d27991..d46d235c5 100644 --- a/Marlin/language_fr.h +++ b/Marlin/language_fr.h @@ -84,9 +84,7 @@ #define MSG_MOTION "Mouvement" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "Contraste LCD" #define MSG_STORE_EPROM "Sauver config" #define MSG_LOAD_EPROM "Lire config" diff --git a/Marlin/language_it.h b/Marlin/language_it.h index 9ed836dad..80aa9024c 100644 --- a/Marlin/language_it.h +++ b/Marlin/language_it.h @@ -82,10 +82,7 @@ #define MSG_MOTION "Movimento" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm³" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Diam. filo 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Diam. filo 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Diam. filo 3" -#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Diam. filo 4" +#define MSG_FILAMENT_DIAM "Diam. filo" #define MSG_CONTRAST "Contrasto LCD" #define MSG_STORE_EPROM "Salva in EEPROM" #define MSG_LOAD_EPROM "Carica da EEPROM" diff --git a/Marlin/language_kana.h b/Marlin/language_kana.h index f50a1c40e..73322e168 100644 --- a/Marlin/language_kana.h +++ b/Marlin/language_kana.h @@ -84,10 +84,7 @@ #define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "Motion" #define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" -#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "LCD\xba\xdd\xc4\xd7\xbd\xc4" // "LCD contrast" #define MSG_STORE_EPROM "\xd2\xd3\xd8\xcd\xb6\xb8\xc9\xb3" // "Store memory" #define MSG_LOAD_EPROM "\xd2\xd3\xd8\xb6\xd7\xd6\xd0\ba\xd0" // "Load memory" diff --git a/Marlin/language_kana_utf8.h b/Marlin/language_kana_utf8.h index d3f4203cd..587d3f682 100644 --- a/Marlin/language_kana_utf8.h +++ b/Marlin/language_kana_utf8.h @@ -88,10 +88,7 @@ #define MSG_MOTION "ウゴキセツテイ" // "Motion" #define MSG_VOLUMETRIC "フィラナント" // "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" -#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "LCDコントラスト" // "LCD contrast" #define MSG_STORE_EPROM "ナモリヘセケノウ" // "Store memory" #define MSG_LOAD_EPROM "ナモリセラヨミbaミ" // "Load memory" diff --git a/Marlin/language_nl.h b/Marlin/language_nl.h index 1d8b129df..975954c64 100644 --- a/Marlin/language_nl.h +++ b/Marlin/language_nl.h @@ -82,9 +82,7 @@ #define MSG_MOTION "Beweging" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "Geheugen opslaan" #define MSG_LOAD_EPROM "Geheugen laden" diff --git a/Marlin/language_pl.h b/Marlin/language_pl.h index acae0dbf2..5cf87fc9e 100644 --- a/Marlin/language_pl.h +++ b/Marlin/language_pl.h @@ -82,9 +82,7 @@ #define MSG_MOTION "Ruch" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "Kontrast LCD" #define MSG_STORE_EPROM "Zapisz w pamieci" #define MSG_LOAD_EPROM "Wczytaj z pamieci" diff --git a/Marlin/language_pt-br.h b/Marlin/language_pt-br.h index f18b6f887..56def7aa7 100644 --- a/Marlin/language_pt-br.h +++ b/Marlin/language_pt-br.h @@ -82,9 +82,7 @@ #define MSG_MOTION "Movimento" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "Contrast" #define MSG_STORE_EPROM "Guardar memoria" #define MSG_LOAD_EPROM "Carregar memoria" diff --git a/Marlin/language_pt.h b/Marlin/language_pt.h index ce80eff64..0c7611c58 100644 --- a/Marlin/language_pt.h +++ b/Marlin/language_pt.h @@ -82,9 +82,7 @@ #define MSG_MOTION "Movimento" #define MSG_VOLUMETRIC "Filamento" #define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Diam. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Diam. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Diam. 3" +#define MSG_FILAMENT_DIAM "Fil. Diam." #define MSG_CONTRAST "Contraste" #define MSG_STORE_EPROM "Guardar na memoria" #define MSG_LOAD_EPROM "Carregar da memoria" diff --git a/Marlin/language_ru.h b/Marlin/language_ru.h index 729e03d6f..d35daba9e 100644 --- a/Marlin/language_ru.h +++ b/Marlin/language_ru.h @@ -83,9 +83,7 @@ #define MSG_MOTION "Механика" #define MSG_VOLUMETRIC "Пруток" #define MSG_VOLUMETRIC_ENABLED "E в mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Диаметр прутка 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Диаметр прутка 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Диаметр прутка 3" +#define MSG_FILAMENT_DIAM "Диаметр прутка" #define MSG_CONTRAST "Контраст LCD" #define MSG_STORE_EPROM "Сохранить в EEPROM" #define MSG_LOAD_EPROM "Считать из EEPROM" diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index b466cfc51..720e9faa0 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -495,14 +495,19 @@ static void lcd_tune_menu() { // // Nozzle: + // Nozzle 1: // Nozzle 2: // Nozzle 3: // Nozzle 4: // - #if TEMP_SENSOR_0 != 0 - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); - #endif - #if EXTRUDERS > 1 + #if EXTRUDERS == 1 + #if TEMP_SENSOR_0 != 0 + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); + #endif + #else //EXTRUDERS > 1 + #if TEMP_SENSOR_0 != 0 + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N1, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); + #endif #if TEMP_SENSOR_1 != 0 MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N2, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15); #endif @@ -536,18 +541,21 @@ static void lcd_tune_menu() { MENU_ITEM_EDIT(int3, MSG_FLOW, &extruder_multiplier[active_extruder], 10, 999); // - // Flow 0: + // Flow: // Flow 1: // Flow 2: // Flow 3: + // Flow 4: // - MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N0, &extruder_multiplier[0], 10, 999); - #if EXTRUDERS > 1 - MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N1, &extruder_multiplier[1], 10, 999); + #if EXTRUDERS == 1 + MENU_ITEM_EDIT(int3, MSG_FLOW, &extruder_multiplier[0], 10, 999); + #else // EXTRUDERS > 1 + MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N1, &extruder_multiplier[0], 10, 999); + MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N2, &extruder_multiplier[1], 10, 999); #if EXTRUDERS > 2 - MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N2, &extruder_multiplier[2], 10, 999); + MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N3, &extruder_multiplier[2], 10, 999); #if EXTRUDERS > 3 - MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N3, &extruder_multiplier[3], 10, 999); + MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N4, &extruder_multiplier[3], 10, 999); #endif //EXTRUDERS > 3 #endif //EXTRUDERS > 2 #endif //EXTRUDERS > 1 @@ -829,12 +837,12 @@ static void lcd_move_e( pos_label = PSTR(MSG_MOVE_E); #else switch (e) { - case 0: pos_label = PSTR(MSG_MOVE_E0); break; - case 1: pos_label = PSTR(MSG_MOVE_E1); break; + case 0: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E1); break; + case 1: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E2); break; #if EXTRUDERS > 2 - case 2: pos_label = PSTR(MSG_MOVE_E2); break; + case 2: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E3); break; #if EXTRUDERS > 3 - case 3: pos_label = PSTR(MSG_MOVE_E3); break; + case 3: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E4); break; #endif //EXTRUDERS > 3 #endif //EXTRUDERS > 2 } @@ -874,12 +882,12 @@ static void lcd_move_menu_axis() { #if EXTRUDERS == 1 MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e); #else - MENU_ITEM(submenu, MSG_MOVE_E0, lcd_move_e0); - MENU_ITEM(submenu, MSG_MOVE_E1, lcd_move_e1); + MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E1, lcd_move_e0); + MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E2, lcd_move_e1); #if EXTRUDERS > 2 - MENU_ITEM(submenu, MSG_MOVE_E2, lcd_move_e2); + MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_e2); #if EXTRUDERS > 3 - MENU_ITEM(submenu, MSG_MOVE_E3, lcd_move_e3); + MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E4, lcd_move_e3); #endif #endif #endif // EXTRUDERS > 1 @@ -962,18 +970,18 @@ static void lcd_control_menu() { PID_PARAM(Kd, e) = scalePID_d(raw_Kd); updatePID(); } - void copy_and_scalePID_i_E1() { copy_and_scalePID_i(0); } - void copy_and_scalePID_d_E1() { copy_and_scalePID_d(0); } + #define COPY_AND_SCALE(eindex) \ + void copy_and_scalePID_i_E ## eindex() { copy_and_scalePID_i(eindex); } \ + void copy_and_scalePID_d_E ## eindex() { copy_and_scalePID_d(eindex); } + + COPY_AND_SCALE(0); #if ENABLED(PID_PARAMS_PER_EXTRUDER) #if EXTRUDERS > 1 - void copy_and_scalePID_i_E2() { copy_and_scalePID_i(1); } - void copy_and_scalePID_d_E2() { copy_and_scalePID_d(1); } + COPY_AND_SCALE(1); #if EXTRUDERS > 2 - void copy_and_scalePID_i_E3() { copy_and_scalePID_i(2); } - void copy_and_scalePID_d_E3() { copy_and_scalePID_d(2); } + COPY_AND_SCALE(2); #if EXTRUDERS > 3 - void copy_and_scalePID_i_E4() { copy_and_scalePID_i(3); } - void copy_and_scalePID_d_E4() { copy_and_scalePID_d(3); } + COPY_AND_SCALE(3); #endif //EXTRUDERS > 3 #endif //EXTRUDERS > 2 #endif //EXTRUDERS > 1 @@ -995,12 +1003,17 @@ static void lcd_control_temperature_menu() { MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); // - // Nozzle, Nozzle 2, Nozzle 3, Nozzle 4 + // Nozzle + // Nozzle 1, Nozzle 2, Nozzle 3, Nozzle 4 // - #if TEMP_SENSOR_0 != 0 - MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); - #endif - #if EXTRUDERS > 1 + #if EXTRUDERS == 1 + #if TEMP_SENSOR_0 != 0 + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); + #endif + #else //EXTRUDERS > 1 + #if TEMP_SENSOR_0 != 0 + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N1, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); + #endif #if TEMP_SENSOR_1 != 0 MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N2, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15); #endif @@ -1040,59 +1053,42 @@ static void lcd_control_temperature_menu() { // // PID-P, PID-I, PID-D, PID-C + // PID-P E1, PID-I E1, PID-D E1, PID-C E1 + // PID-P E2, PID-I E2, PID-D E2, PID-C E2 + // PID-P E3, PID-I E3, PID-D E3, PID-C E3 + // PID-P E4, PID-I E4, PID-D E4, PID-C E4 // #if ENABLED(PIDTEMP) - // set up temp variables - undo the default scaling - raw_Ki = unscalePID_i(PID_PARAM(Ki,0)); - raw_Kd = unscalePID_d(PID_PARAM(Kd,0)); - MENU_ITEM_EDIT(float52, MSG_PID_P, &PID_PARAM(Kp,0), 1, 9990); - // i is typically a small value so allows values below 1 - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E1); - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d_E1); + + #define _PID_MENU_ITEMS(ELABEL, eindex) \ + raw_Ki = unscalePID_i(PID_PARAM(Ki, eindex)); \ + raw_Kd = unscalePID_d(PID_PARAM(Kd, eindex)); \ + MENU_ITEM_EDIT(float52, MSG_PID_P ELABEL, &PID_PARAM(Kp, eindex), 1, 9990); \ + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I ELABEL, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E ## eindex); \ + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D ELABEL, &raw_Kd, 1, 9990, copy_and_scalePID_d_E ## eindex) + #if ENABLED(PID_ADD_EXTRUSION_RATE) - MENU_ITEM_EDIT(float3, MSG_PID_C, &PID_PARAM(Kc,0), 1, 9990); - #endif//PID_ADD_EXTRUSION_RATE - #if ENABLED(PID_PARAMS_PER_EXTRUDER) - #if EXTRUDERS > 1 - // set up temp variables - undo the default scaling - raw_Ki = unscalePID_i(PID_PARAM(Ki,1)); - raw_Kd = unscalePID_d(PID_PARAM(Kd,1)); - MENU_ITEM_EDIT(float52, MSG_PID_P MSG_E2, &PID_PARAM(Kp,1), 1, 9990); - // i is typically a small value so allows values below 1 - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_E2, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E2); - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D MSG_E2, &raw_Kd, 1, 9990, copy_and_scalePID_d_E2); - #if ENABLED(PID_ADD_EXTRUSION_RATE) - MENU_ITEM_EDIT(float3, MSG_PID_C MSG_E2, &PID_PARAM(Kc,1), 1, 9990); - #endif//PID_ADD_EXTRUSION_RATE + #define PID_MENU_ITEMS(ELABEL, eindex) \ + _PID_MENU_ITEMS(ELABEL, eindex); \ + MENU_ITEM_EDIT(float3, MSG_PID_C ELABEL, &PID_PARAM(Kc, eindex), 1, 9990) + #else + #define PID_MENU_ITEMS(ELABEL, eindex) _PID_MENU_ITEMS(ELABEL, eindex) + #endif - #if EXTRUDERS > 2 - // set up temp variables - undo the default scaling - raw_Ki = unscalePID_i(PID_PARAM(Ki,2)); - raw_Kd = unscalePID_d(PID_PARAM(Kd,2)); - MENU_ITEM_EDIT(float52, MSG_PID_P MSG_E3, &PID_PARAM(Kp,2), 1, 9990); - // i is typically a small value so allows values below 1 - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_E3, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E3); - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D MSG_E3, &raw_Kd, 1, 9990, copy_and_scalePID_d_E3); - #if ENABLED(PID_ADD_EXTRUSION_RATE) - MENU_ITEM_EDIT(float3, MSG_PID_C MSG_E3, &PID_PARAM(Kc,2), 1, 9990); - #endif//PID_ADD_EXTRUSION_RATE + #if ENABLED(PID_PARAMS_PER_EXTRUDER) && EXTRUDERS > 1 + PID_MENU_ITEMS(MSG_E1, 0); + PID_MENU_ITEMS(MSG_E2, 1); + #if EXTRUDERS > 2 + PID_MENU_ITEMS(MSG_E3, 2); + #if EXTRUDERS > 3 + PID_MENU_ITEMS(MSG_E4, 3); + #endif //EXTRUDERS > 3 + #endif //EXTRUDERS > 2 + #else //!PID_PARAMS_PER_EXTRUDER || EXTRUDERS == 1 + PID_MENU_ITEMS("", 0); + #endif //!PID_PARAMS_PER_EXTRUDER || EXTRUDERS == 1 - #if EXTRUDERS > 3 - // set up temp variables - undo the default scaling - raw_Ki = unscalePID_i(PID_PARAM(Ki,3)); - raw_Kd = unscalePID_d(PID_PARAM(Kd,3)); - MENU_ITEM_EDIT(float52, MSG_PID_P MSG_E4, &PID_PARAM(Kp,3), 1, 9990); - // i is typically a small value so allows values below 1 - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_E4, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E4); - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D MSG_E4, &raw_Kd, 1, 9990, copy_and_scalePID_d_E4); - #if ENABLED(PID_ADD_EXTRUSION_RATE) - MENU_ITEM_EDIT(float3, MSG_PID_C MSG_E4, &PID_PARAM(Kc,3), 1, 9990); - #endif//PID_ADD_EXTRUSION_RATE - #endif//EXTRUDERS > 3 - #endif//EXTRUDERS > 2 - #endif//EXTRUDERS > 1 - #endif //PID_PARAMS_PER_EXTRUDER - #endif//PIDTEMP + #endif //PIDTEMP // // Preheat PLA conf @@ -1201,13 +1197,15 @@ static void lcd_control_volumetric_menu() { MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled, calculate_volumetric_multipliers); if (volumetric_enabled) { - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_0, &filament_size[0], 1.5, 3.25, calculate_volumetric_multipliers); - #if EXTRUDERS > 1 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], 1.5, 3.25, calculate_volumetric_multipliers); + #if EXTRUDERS == 1 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &filament_size[0], 1.5, 3.25, calculate_volumetric_multipliers); + #else //EXTRUDERS > 1 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E1, &filament_size[0], 1.5, 3.25, calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E2, &filament_size[1], 1.5, 3.25, calculate_volumetric_multipliers); #if EXTRUDERS > 2 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], 1.5, 3.25, calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E3, &filament_size[2], 1.5, 3.25, calculate_volumetric_multipliers); #if EXTRUDERS > 3 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_3, &filament_size[3], 1.5, 3.25, calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E4, &filament_size[3], 1.5, 3.25, calculate_volumetric_multipliers); #endif //EXTRUDERS > 3 #endif //EXTRUDERS > 2 #endif //EXTRUDERS > 1 From cffb2d457e72721aad3375431fe72cd87a6e2a83 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 11 Sep 2015 19:52:21 -0700 Subject: [PATCH 3/3] Cleanup file formatting --- Marlin/language_an.h | 2 +- Marlin/language_bg.h | 8 ++++---- Marlin/language_ca.h | 2 +- Marlin/language_es.h | 2 +- Marlin/language_eu.h | 2 +- Marlin/language_it.h | 2 +- Marlin/language_kana.h | 2 +- Marlin/language_kana_utf8.h | 4 ++-- Marlin/language_nl.h | 2 +- Marlin/language_pl.h | 2 +- Marlin/language_test.h | 20 ++++++++++---------- 11 files changed, 24 insertions(+), 24 deletions(-) diff --git a/Marlin/language_an.h b/Marlin/language_an.h index 625bd1ab9..90e8169fe 100644 --- a/Marlin/language_an.h +++ b/Marlin/language_an.h @@ -81,7 +81,7 @@ #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimiento" #define MSG_VOLUMETRIC "Filament" -#define MSG_VOLUMETRIC_ENABLED "E in mm3" +#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "Contrast" #define MSG_STORE_EPROM "Alzar Memoria" diff --git a/Marlin/language_bg.h b/Marlin/language_bg.h index 0afe34486..ca7c52649 100644 --- a/Marlin/language_bg.h +++ b/Marlin/language_bg.h @@ -7,12 +7,12 @@ */ #ifndef LANGUAGE_BG_H #define LANGUAGE_BG_H - + #define MAPPER_D0D1 // For Cyrillic // Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h //#define SIMULATE_ROMFONT #define DISPLAY_CHARSET_ISO10646_5 - + #define WELCOME_MSG MACHINE_NAME " Готов." #define MSG_SD_INSERTED "Картата е поставена" #define MSG_SD_REMOVED "Картата е извадена" @@ -124,7 +124,7 @@ #define MSG_ENDSTOP_ABORT "Стоп Кр.Изключватели" #define MSG_END_HOUR "часа" #define MSG_END_MINUTE "минути" - + #if ENABLED(DELTA_CALIBRATION_MENU) #define MSG_DELTA_CALIBRATE "Делта Калибровка" #define MSG_DELTA_CALIBRATE_X "Калибровка X" @@ -132,5 +132,5 @@ #define MSG_DELTA_CALIBRATE_Z "Калибровка Z" #define MSG_DELTA_CALIBRATE_CENTER "Калибровка Център" #endif // DELTA_CALIBRATION_MENU - + #endif // LANGUAGE_BG_H diff --git a/Marlin/language_ca.h b/Marlin/language_ca.h index dc69b5796..a5b9d08c3 100644 --- a/Marlin/language_ca.h +++ b/Marlin/language_ca.h @@ -8,7 +8,7 @@ #ifndef LANGUAGE_CA_H #define LANGUAGE_CA_H -//#define MAPPER_NON +//#define MAPPER_NON #define MAPPER_C2C3 // because of "ó" // Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h //#define SIMULATE_ROMFONT diff --git a/Marlin/language_es.h b/Marlin/language_es.h index f04702435..85de78f5b 100644 --- a/Marlin/language_es.h +++ b/Marlin/language_es.h @@ -81,7 +81,7 @@ #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimiento" #define MSG_VOLUMETRIC "Filamento" -#define MSG_VOLUMETRIC_ENABLED "E in mm3" +#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "Contraste" #define MSG_STORE_EPROM "Guardar memoria" diff --git a/Marlin/language_eu.h b/Marlin/language_eu.h index 3298fef14..331e020b8 100644 --- a/Marlin/language_eu.h +++ b/Marlin/language_eu.h @@ -81,7 +81,7 @@ #define MSG_TEMPERATURE "Tenperatura" #define MSG_MOTION "Mugimendua" #define MSG_VOLUMETRIC "Filament" -#define MSG_VOLUMETRIC_ENABLED "E in mm3" +#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "LCD kontrastea" #define MSG_STORE_EPROM "Gorde memoria" diff --git a/Marlin/language_it.h b/Marlin/language_it.h index 80aa9024c..3e2e11ee8 100644 --- a/Marlin/language_it.h +++ b/Marlin/language_it.h @@ -81,7 +81,7 @@ #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimento" #define MSG_VOLUMETRIC "Filament" -#define MSG_VOLUMETRIC_ENABLED "E in mm³" +#define MSG_VOLUMETRIC_ENABLED "E in mm³" #define MSG_FILAMENT_DIAM "Diam. filo" #define MSG_CONTRAST "Contrasto LCD" #define MSG_STORE_EPROM "Salva in EEPROM" diff --git a/Marlin/language_kana.h b/Marlin/language_kana.h index 73322e168..07b5d314a 100644 --- a/Marlin/language_kana.h +++ b/Marlin/language_kana.h @@ -5,7 +5,7 @@ * See also documentation/LCDLanguageFont.md * */ - + #ifndef LANGUAGE_KANA_H #define LANGUAGE_KANA_H diff --git a/Marlin/language_kana_utf8.h b/Marlin/language_kana_utf8.h index 587d3f682..ba680e234 100644 --- a/Marlin/language_kana_utf8.h +++ b/Marlin/language_kana_utf8.h @@ -5,7 +5,7 @@ * See also documentation/LCDLanguageFont.md * */ - + #ifndef LANGUAGE_KANA_UTF_H #define LANGUAGE_KANA_UTF_H @@ -15,7 +15,7 @@ #define DISPLAY_CHARSET_ISO10646_KANA // This is very crude replacement of the codes used in language_kana.h from somebody who really does not know what he is doing. -// Just to show the potential benefit of unicode. +// Just to show the potential benefit of unicode. // This translation can be improved by using the full charset of unicode codeblock U+30A0 to U+30FF. // 片仮名表示定義 diff --git a/Marlin/language_nl.h b/Marlin/language_nl.h index 975954c64..81772f990 100644 --- a/Marlin/language_nl.h +++ b/Marlin/language_nl.h @@ -81,7 +81,7 @@ #define MSG_TEMPERATURE "Temperatuur" #define MSG_MOTION "Beweging" #define MSG_VOLUMETRIC "Filament" -#define MSG_VOLUMETRIC_ENABLED "E in mm3" +#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "Geheugen opslaan" diff --git a/Marlin/language_pl.h b/Marlin/language_pl.h index 5cf87fc9e..e69a7ead9 100644 --- a/Marlin/language_pl.h +++ b/Marlin/language_pl.h @@ -81,7 +81,7 @@ #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Ruch" #define MSG_VOLUMETRIC "Filament" -#define MSG_VOLUMETRIC_ENABLED "E in mm3" +#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "Kontrast LCD" #define MSG_STORE_EPROM "Zapisz w pamieci" diff --git a/Marlin/language_test.h b/Marlin/language_test.h index e26848ef0..0135a5d95 100644 --- a/Marlin/language_test.h +++ b/Marlin/language_test.h @@ -8,16 +8,16 @@ #ifndef LANGUAGE_TEST_H #define LANGUAGE_TEST_H -// Select ONE of the following Mappers. -// They decide what to do with a symbol in the area of [0x80:0xFF]. They take a symbol of this language file and make them point +// Select ONE of the following Mappers. +// They decide what to do with a symbol in the area of [0x80:0xFF]. They take a symbol of this language file and make them point // into an array with 128 cells, where they'll find the place of the symbol of the font in use. // -// a.)For ASCII coded Language_xx.h files like (en) there are no occurrences of symbols above 0x7F so no mapper is needed. +// a.)For ASCII coded Language_xx.h files like (en) there are no occurrences of symbols above 0x7F so no mapper is needed. // If such a symbol appears it is mapped directly into the font. This is the case for the language files we used until now, with all the STR_XX or // "\xxx" symbols. All Symbols are only one byte long. // b.) For Unicoded Language_xx.h files (currently ru, de and kana_utf8 ) the non ASCII [0x00-0x7F] symbols are represented by more then one byte. // In the case of two bytes the first is pointing to a 'codepage' and the second to a place in the codepage. These codepages contain 64 symbols. -// So two of them can be mapped. For most of the European languages the necessary symbols are contained in the pages C2 and C3. Cyrillic uses D0 +// So two of them can be mapped. For most of the European languages the necessary symbols are contained in the pages C2 and C3. Cyrillic uses D0 // and D1. // c.) For katakana (one of the Japanese symbol sets) Unicode uses 3 bytes. Here the second byte also points to a codepage and byte 3 to the symbol. // I hope the pages E282 and E283 are sufficient to write katakana. @@ -124,14 +124,14 @@ #define MSG_COOLDOWN STRG_C3_9 #define MSG_SWITCH_PS_OFF STRG_C3_a #define MSG_MOVE_AXIS STRG_C3_b - + #define MSG_MAIN STRG_OKTAL_2 #define MSG_TEMPERATURE STRG_OKTAL_3 #define MSG_MOTION STRG_OKTAL_4 #define MSG_VOLUMETRIC STRG_OKTAL_5 #define MSG_CONTRAST STRG_OKTAL_6 #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 - + #define MSG_NOZZLE STRG_OKTAL_8 #define MSG_FAN_SPEED STRG_OKTAL_9 #define MSG_AUTOTEMP STRG_OKTAL_a @@ -159,14 +159,14 @@ #define MSG_COOLDOWN STRG_D1_9 #define MSG_SWITCH_PS_OFF STRG_D1_a #define MSG_MOVE_AXIS STRG_D1_b - + #define MSG_MAIN STRG_OKTAL_2 #define MSG_TEMPERATURE STRG_OKTAL_3 #define MSG_MOTION STRG_OKTAL_4 #define MSG_VOLUMETRIC STRG_OKTAL_5 #define MSG_CONTRAST STRG_OKTAL_6 #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 - + #define MSG_NOZZLE STRG_OKTAL_8 #define MSG_FAN_SPEED STRG_OKTAL_9 #define MSG_AUTOTEMP STRG_OKTAL_a @@ -194,14 +194,14 @@ #define MSG_COOLDOWN STRG_E383_9 #define MSG_SWITCH_PS_OFF STRG_E383_a #define MSG_MOVE_AXIS STRG_E383_b - + #define MSG_MAIN STRG_OKTAL_2 #define MSG_TEMPERATURE STRG_OKTAL_3 #define MSG_MOTION STRG_OKTAL_4 #define MSG_VOLUMETRIC STRG_OKTAL_5 #define MSG_CONTRAST STRG_OKTAL_6 #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 - + #define MSG_NOZZLE STRG_OKTAL_8 #define MSG_FAN_SPEED STRG_OKTAL_9 #define MSG_AUTOTEMP STRG_OKTAL_a