Add include guards to some headers
This commit is contained in:
parent
8ff49d6b46
commit
b6546ea33a
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* This module is stripped down version of the LPC1768_PWM.h file from
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Test Arduino Due specific configuration values for errors at compile-time.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifdef ARDUINO_ARCH_ESP32
|
||||
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#if ENABLED(EMERGENCY_PARSER)
|
||||
#error "EMERGENCY_PARSER is not yet implemented for ESP32. Disable EMERGENCY_PARSER to continue."
|
||||
|
@ -19,3 +19,4 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Test X86_64-specific configuration values for errors at compile-time.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Test LPC176x-specific configuration values for errors at compile-time.
|
||||
|
@ -19,7 +19,6 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "../../shared/HAL_SPI.h"
|
||||
|
@ -19,6 +19,8 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "../shared/persistent_store_api.h"
|
||||
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
void u8g_i2c_init(uint8_t options);
|
||||
uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos);
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* LPC1768 LCD-specific defines
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* LCD delay routines - used by all the drivers.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Low level pin manipulation routines - used by all the drivers.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Test STM32F1-specific configuration values for errors at compile-time.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Test STM32F4-specific configuration values for errors at compile-time.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Test STM32F7-specific configuration values for errors at compile-time.
|
||||
|
@ -19,7 +19,6 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include <Servo.h>
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Description: HAL for
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Test TEENSY35_36 specific configuration values for errors at compile-time.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Endstop Interrupts
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Fast I/O Routines for Teensy 3.5 and Teensy 3.6
|
||||
|
@ -19,7 +19,6 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define SCK_PIN 13
|
||||
|
@ -19,7 +19,6 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "HAL.h"
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Test TEENSY35_36 specific configuration values for errors at compile-time.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
//
|
||||
// Serial aliases for debugging.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#undef MIN
|
||||
#undef MAX
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* This module is off by default, but can be enabled to facilitate the display of
|
||||
|
@ -19,7 +19,6 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* gcode.h - Temporary container for all gcode handlers
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// Use this file to select the com driver for device drivers that are NOT in the U8G library
|
||||
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Standard Marlin Boot Screen bitmaps
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Standard Marlin Status Screen bitmaps
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
Fontname: -Misc-Fixed-Medium-R-Normal--9-90-75-75-C-60-ISO10646-1
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* ultralcd_DOGM.h
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// NOTE - the HAL version of the rrd device uses a generic ST7920 device. See the
|
||||
// file u8g_dev_st7920_128x64_HAL.cpp for the HAL version.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/************
|
||||
* ui_api.h *
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* thermistornames.h
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* vector_3.cpp - Vector library for bed leveling
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* delta.h - Delta-specific functions
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* motion.h
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* scara.h - SCARA-specific functions
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor
|
||||
const short temptable_1[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, RS thermistor 198-961
|
||||
const short temptable_10[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// Pt1000 with 1k0 pullup
|
||||
const short temptable_1010[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// Pt1000 with 4k7 pullup
|
||||
const short temptable_1047[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, QU-BD silicone bed QWG-104F-3950 thermistor
|
||||
const short temptable_11[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// Pt100 with 1k0 pullup
|
||||
const short temptable_110[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 4700 K, 4.7 kOhm pull-up, (personal calibration for Makibox hot bed)
|
||||
const short temptable_12[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, Hisens thermistor
|
||||
const short temptable_13[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// Pt100 with 4k7 pullup
|
||||
const short temptable_147[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// 100k bed thermistor in JGAurora A5. Calibrated by Sam Pinches 21st Jan 2018 using cheap k-type thermocouple inserted into heater block, using TM-902C meter.
|
||||
const short temptable_15[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - version (measured/tested/approved)
|
||||
const short temptable_18[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
//
|
||||
// R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// PT100 with INA826 amp on Ultimaker v2.0 electronics
|
||||
// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 4120 K, 4.7 kOhm pull-up, mendel-parts
|
||||
const short temptable_3[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 10 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, Generic 10k thermistor
|
||||
const short temptable_4[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up
|
||||
// 100k ParCan thermistor (104GT-2)
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// 100k Zonestar thermistor. Adjusted By Hally
|
||||
const short temptable_501[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 4092 K, 1 kOhm pull-up,
|
||||
// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up,
|
||||
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up,
|
||||
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 4092 K, 8.2 kOhm pull-up, 100k Epcos (?) thermistor
|
||||
const short temptable_6[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up,
|
||||
// Maker's Tool Works Kapton Bed Thermistor
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up,
|
||||
// Formbot / Vivedino high temp 100k thermistor
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 2.5 MOhm, beta25 = 4500 K, 4.7 kOhm pull-up, DyzeDesign 500 °C Thermistor
|
||||
const short temptable_66[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* This file was generated by tltgen on Thu Jul 5 15:46:43 2018.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 500 KOhm, beta25 = 3800 K, 4.7 kOhm pull-up, SliceEngineering 450 °C Thermistor
|
||||
const short temptable_67[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAG-J01
|
||||
const short temptable_7[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// Stock BQ Hephestos 2 100k thermistor.
|
||||
// Created on 29/12/2017 with an ambient temperature of 20C.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAF-J01
|
||||
// R0 = 100000 Ohm
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up,
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 3950 K, 10 kOhm pull-up, NTCS0603E3104FHT
|
||||
const short temptable_8[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, GE Sensing AL03006-58.2K-97-G1
|
||||
const short temptable_9[][2] PROGMEM = {
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// User-defined table 1
|
||||
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// User-defined table 2
|
||||
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* 3DRAG (and K8200 / K8400) Arduino Mega with RAMPS v1.4 pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Rev B 2 JUN 2017
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Arduino DUE Shield Kit (ADSK) pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Alligator Board R2
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Anet V1.0 board pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* ARCHIM1 pin assignment
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* ARCHIM2 pin assignment
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef STM32F4
|
||||
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* AZSMZ MINI pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Azteeg X1 pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* AZTEEG_X3_PRO (Arduino Mega) pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Azteeg X5 GT pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Azteeg X5 MINI pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Azteeg X5 MINI pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* BAM&DICE Due (Arduino Mega) pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#if !defined(__STM32F1__) && !defined(__STM32F4__)
|
||||
#error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef TARGET_STM32F1
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef TARGET_LPC1768
|
||||
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* BIQU BQ111-A4
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* BIQU BQ111-A4
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* KFB 2.0 – Arduino Mega2560 with RAMPS v1.4 pin assignments
|
||||
|
@ -19,6 +19,7 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef TARGET_LPC1768
|
||||
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
|
||||
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user